PIC16LC771-I/SO - 8-Bit MCU, 7KB OTP, 20MHz, SOIC-20 | Microchip
Teilenummer: PIC16LC771-I/SO ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $3.07 | $30,70 |
| 100 | $2.65 | $265,00 |
| 500 | $2.31 | $1.155,00 |
| 1.000 | $2.04 | $2.040,00 |
PIC16LC771-I/SO Übersicht
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and programmable I/O peripherals onto one die. Within the broader power IC / power management hierarchy, an MCU like the PIC16LC771 sits alongside voltage regulators and supervisors as part of an embedded system. The PIC16 line uses a Harvard-architecture RISC core with a small, deterministic instruction set, which simplifies firmware development and yields predictable interrupt latency for real-time control tasks.
Key features of the PIC16LC771 include 7 KB (4K x 14) of OTP program memory for permanent firmware storage, 256 bytes of data RAM for variable storage, integrated ADC, PWM, USART, and timers, 16 general-purpose I/O pins, and an integrated analog comparator. The device supports in-circuit serial programming (ICSP) through two dedicated pins, allowing firmware to be loaded after PCB assembly. Its low-power CMOS design enables nanoWatt-style sleep modes suitable for battery-powered products.
Architecturally, the PIC16LC771 uses Microchip's mid-range 14-bit instruction RISC core with a hardware stack and interrupt controller, supported by a small instruction cache and direct register-mapped peripherals. This design delivers strong deterministic real-time performance for control loops, sensor sampling, and human-interface applications at modest clock rates.
Typical applications include industrial sensor conditioning, low-power consumer products, battery management controllers, automotive body and accessory modules, and white-goods / appliance control panels. The wide-body SOIC footprint and dual supply range also make it convenient as a 3.3 V or 5 V system controller for mixed-voltage designs.
When designing with this part, verify that OTP memory is appropriate for the production volume; for high-volume runs, prefer the flash-based PIC16F877A / PIC16F887 family which is pin-to-pin compatible with this SOIC-20 footprint. Always place 0.1 µF decoupling close to VDD and use the ICSP header for in-circuit firmware updates during development.
Drop-in-Alternativen für PIC16LC771-I/SO – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16LC771-I/SO (gleiche Bauform und Footprint) – abweichend in Package, Program Memory Size, ADC, Operating Temperature, RAM Size.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16LC771-I/SO
✅ Drop-In✓ Auf Lager
$2.04 / Stück
Datenblatt ansehen →PIC16LC717-I/SO
✅ Drop-In✓ Auf Lager
$2.85 / Stück
Datenblatt ansehen →PIC16LC770-I/SO
✅ Drop-In✓ Auf Lager
$2.31 / Stück
Datenblatt ansehen →PIC16LC771T-I/SO
✅ Drop-In✓ Auf Lager
$4.3 / Stück
Datenblatt ansehen →PIC16LC716T-04I/SO
✅ Drop-In✓ Auf Lager
$1.05 / Stück
Datenblatt ansehen →PIC16LC711-04I/SO
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.78 / Stück
Datenblatt ansehen →PIC16LC771-I/SO Grenzwerte & elektrische Eigenschaften
| Core Architecture | PIC16 8-bit RISC (Harvard, 14-bit instruction word) |
| Program Memory Type | OTP (One-Time Programmable) EPROM |
| Program Memory Size | 7 KB (4K x 14) |
| Data RAM | 256 bytes |
| Maximum CPU Clock | 20 MHz |
| Supply Voltage (VDD) | 2.5 V to 5.5 V |
| I/O Pins | 16 |
| Gehäuse | 20-pin SOIC (wide body, 300 mil) |
| Montageart | Surface Mount |
| Betriebstemperatur | -40 °C to +85 °C (Industrial) |
| Temperature Grade | Industrial (I) |
| MSL-Level | 1 (unlimited floor life) |
| RoHS-Status | Compliant |
| Lead-Free | Yes |
| Programming Method | ICSP (In-Circuit Serial Programming) |
| Peripherals | ADC, PWM, USART, Timers, Comparator (per device datasheet) |
| I/O Banks | 1 (single bank, 16 GPIO) |
PIC16LC771-I/SO Pin-Konfiguration
| Pin 1 | RA2/AN2 — GPIO RA2 / analog input AN2 |
| Pin 2 | RA3/AN3 — GPIO RA3 / analog input AN3 |
| Pin 3 | RA4/T0CKI — GPIO RA4 / Timer0 clock input |
| Pin 4 | RA5/AN4 — GPIO RA5 / analog input AN4 |
| Pin 5 | VSS — Ground reference |
| Pin 6 | OSC1/CLKIN — Oscillator input / external clock input |
| Pin 7 | OSC2/CLKOUT — Oscillator output / clock output |
| Pin 8 | RB0/INT — GPIO RB0 / external interrupt |
| Pin 9 | RB1 — GPIO RB1 |
| Pin 10 | RB2 — GPIO RB2 |
| Pin 11 | RB3 — GPIO RB3 |
| Pin 12 | RB4 — GPIO RB4 |
| Pin 13 | RB5 — GPIO RB5 |
| Pin 14 | RB6/PGC — GPIO RB6 / ICSP clock |
| Pin 15 | RB7/PGD — GPIO RB7 / ICSP data |
| Pin 16 | RC0 — GPIO RC0 |
| Pin 17 | RC1 — GPIO RC1 |
| Pin 18 | RC2 — GPIO RC2 |
| Pin 19 | RC3 — GPIO RC3 |
| Pin 20 | VDD — Positive supply (2.5 V to 5.5 V) |
Typische Anwendungen
PIC16LC771-I/SO ist geeignet für 6 Anwendungs: Industrial Sensor Conditioning & Acquisition, Low-Power Battery-Powered Consumer Products, White Goods & Appliance Control Panels, Automotive Body & Accessory Modules, LED Lighting & Signage Controllers, HVAC & Environmental Control Boards.
Industrial Sensor Conditioning & Acquisition
The PIC16LC771-I/SO fits industrial sensor nodes because its 16 GPIO, integrated ADC, and 2.5 V to 5.5 V supply let it digitize 4-20 mA or 0-10 V transducer signals directly off a 24 V industrial rail that has been regulated to 5 V. The 20 MHz PIC16 RISC core provides 200 ns deterministic instruction cycles for tight control loops, while 256 bytes of RAM accommodates moving-average filtering of ADC samples. The -40 °C to +85 °C industrial temperature range supports factory-floor and unheated-cabinet installations. Unlike higher-Power Arduino-class boards, this part integrates ADC, timers, USART, and PWM on a single die, shrinking BOM and PCB area for cost-sensitive multi-sensor transmitter designs.
Empfohlen
Low-Power Battery-Powered Consumer Products
The PIC16LC771-I/SO is well-matched to battery-powered consumer devices because the 'LC' low-voltage CMOS process keeps quiescent current low and the 2.5 V minimum VDD allows direct operation from 2xAA alkaline or single-cell Li-ion without boost conversion. The mid-range 14-bit RISC core consumes minimal active current, and the 256-byte RAM is sufficient for state machines, button de-bounce, and small display buffers. Integrated PWM can drive buzzers, LEDs, or haptics directly from the GPIO. Compared with higher-power ARM Cortex-M0 alternatives, the PIC16LC771 has no flash controller overhead, making it ideal for ultra-low-cost disposable or seasonal products where OTP memory and minimal BOM cost dominate the design trade-off.
Empfohlen
White Goods & Appliance Control Panels
The PIC16LC771-I/SO suits washing machines, dishwashers, and microwave control panels because its 20 MHz PIC16 RISC core drives segmented or character LCDs through multiplexing, while integrated timers generate beep tones and motor PWM signals for variable-speed pumps. The 7 KB OTP program memory accommodates full appliance state machines including fault logging and self-test routines. The wide-body SOIC-20 footprint simplifies hand-solder rework and supports high-volume SMT lines with standard 300 mil tooling. Unlike newer capacitive-touch controllers, this MCU delivers reliable electromechanical button handling and proven EMI immunity in noisy motor environments at a fraction of the cost of ARM-based platforms.
Empfohlen
Automotive Body & Accessory Modules
The PIC16LC771-I/SO handles non-safety body modules such as interior lighting, mirror controllers, and seat heaters where its 16 GPIO drive LED drivers, MOSFET gates, and relay coils directly through PWM or discrete I/O. The 2.5 V to 5.5 V supply tolerance is compatible with regulated 12 V automotive rails, though the part is qualified for industrial -40 °C to +85 °C rather than AEC-Q100 automotive grade. The 20 MHz core and deterministic interrupts keep button-press latency under 5 ms for HMI feedback. For safety-critical automotive, AEC-Q100-qualified dsPIC or PIC18 variants are required; the LC771 is reserved for non-safety accessory nodes only.
Empfohlen
LED Lighting & Signage Controllers
The PIC16LC771-I/SO drives RGB LED strips and channel-letter signage by generating multiple PWM channels from its integrated timer peripherals, while the 16 GPIO can scan up to 16 channels directly or expand via external drivers. The 20 MHz instruction rate supports 8-bit color resolution at refresh rates above 100 Hz, eliminating visible flicker. The wide 2.5 V to 5.5 V supply accepts either 3.3 V logic-level or 5 V LED-driver rails. With 7 KB OTP program memory, the firmware can store smooth color transitions, scheduling, and remote-control command decoding for DMX-512 or simple serial protocols without external EEPROM.
Empfohlen
HVAC & Environmental Control Boards
The PIC16LC771-I/SO is appropriate for thermostats, fan controllers, and humidistats because its ADC reads temperature/humidity sensors, the PWM drives TRIAC gates or fan motors, and the USART interfaces to display modules or remote wall units. The -40 °C to +85 °C industrial range handles unheated attic and basement installations common in HVAC equipment rooms. The OTP memory suit is configured to volume production of stable, mature HVAC firmware that rarely changes, lowering overall BOM cost. Compared with 32-bit Cortex-M alternatives, this PIC16LC771 draws less quiescent current, helping thermostats meet Energy Star standby budgets of <1 mW.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16LC771-I/SO – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16LC717-I/SO | PIC16LC770-I/SO | PIC16LC771T-I/SO | PIC16LC716T-04I/SO |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | SOIC-20 (wide body, 300 mil) | SOIC-20 (wide body, 300 mil) | SOIC-20 (wide body, 300 mil) | SOIC-20 (wide body, 300 mil) | SOIC-20 (wide body, 300 mil) |
| Program Memory | 7 KB (4K x 14) OTP | OTP, smaller than 7 KB | OTP, similar 7 KB range | 7 KB OTP (identical die) | OTP, smaller than 7 KB |
| Maximum CPU Clock | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Temperature Grade | Industrial (-40 C to +85 C) | Industrial (-40 C to +85 C) | Industrial (-40 C to +85 C) | Industrial (-40 C to +85 C) | Industrial (-40 C to +85 C) |
| Carrier Packaging | Tube | Tube | Tube | Tape and Reel | Tape and Reel |
Wichtigste Unterscheidungsmerkmale
- Wide-body SOIC-20 with 16 GPIO and full PIC16 mid-range peripheral set (vs. PIC16LC770-I/SO)
- Industrial temperature grade with OTP memory and 7 KB program space (vs. PIC16LC771/SO)
- Tube packaging optimized for prototyping and low-volume assembly (vs. PIC16LC771T-I/SO)
Designhinweise
Place a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 20) with a short, wide trace to the VSS pin (pin 5). For designs driving heavy GPIO currents or operating at 20 MHz, add a bulk 10 µF tantalum or ceramic capacitor on the same rail within 25 mm of the IC. This suppresses VDD droop during GPIO transitions and reduces EMI on adjacent analog channels during ADC conversions.
PIC16LC771 uses OTP (One-Time Programmable) EPROM for program memory - firmware can only be programmed ONCE per device. Do not use OTP for prototype builds because every firmware revision requires a new chip; choose the flash-based PIC16F877A or PIC16F887 for prototypes and reserve PIC16LC771 for production runs where OTP cost savings justify the lost rework flexibility.
Route the ICSP pins RB6 (PGC) and RB7 (PGD) directly to a 6-pin header with no series resistors, ensuring programming works in-circuit on populated boards. Keep the 20 MHz crystal or resonator traces to OSC1 and OSC2 short and symmetric, and guard them with a VSS trace to prevent noise coupling from switching GPIO. Analog inputs should be routed away from digital switching signals, with an AGND/VSS separation only if the design mixes precision analog with high-current digital drivers.
Compliance-Informationen
RoHS-compliant lead-free SOIC-20 package per Microchip product page. Industrial temperature grade -40 C to +85 C only; not AEC-Q100 qualified for automotive safety. Choose PIC18 or dsPIC AEC-Q100 variants for automotive safety.
