PIC16LF1516T-I/SS - 8-bit XLP MCU 14KB Flash 28-SSOP | Microchip
Teilenummer: PIC16LF1516T-I/SS ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.95 | $2,95 |
| 10 | $2.62 | $26,20 |
| 100 | $2.21 | $221,00 |
| 500 | $1.85 | $925,00 |
| 1.000 | $1.52 | $1.520,00 |
PIC16LF1516T-I/SS Übersicht
What is a PIC microcontroller? A PIC (Peripheral Interface Controller) is a family of 8-bit/16-bit/32-bit microcontrollers built around a RISC architecture originally developed by General Instrument and now owned by Microchip Technology. PIC MCUs integrate a CPU core, Flash program memory, SRAM data memory, peripherals (ADC, timers, communication interfaces) and a power management block into a single IC. The PIC16F1xxx enhanced mid-range family sits in the middle of the PIC portfolio, balancing code density, peripheral integration, and ultra-low-power XLP operation for battery-powered and always-on applications.
The PIC16LF1516 includes a 10-bit ADC with up to 17 channels, two Capture/Compare/PWM (CCP) modules, one Enhanced CCP (ECCP), an MI2C (Master I2C) interface, an SPI interface, an EUSART, and an internal 16MHz oscillator. XLP technology enables extremely low active and sleep currents, making the LF variant (low-voltage F) suited for 2-cell battery or coin-cell designs. The "T" suffix denotes tape-and-reel delivery, and "-I" indicates the -40C to +85C industrial temperature range.
The enhanced mid-range core provides 49 instructions with 16 stack levels, supporting interrupt-driven designs and deterministic real-time response. Self-read/write Flash allows in-application firmware updates without an external programmer. Combined with peripheral pin select and configurable oscillator options, the PIC16LF1516 enables compact designs that minimize external components.
Typical applications include low-power sensor nodes, battery-powered IoT endpoints, industrial control logic, automotive body controllers, and home appliance user interfaces. Its small footprint and modest power budget also suit wearable health monitors and remote controls. For higher pin counts or larger memory, designers migrate within the same family to PIC16LF1517 (40-pin), PIC16LF1518 (44-pin) or PIC16LF1519 (44-pin).
When designing with this MCU, ensure the ICSP/ICD pins are routed to a debug header for MPLAB Snap/PICkit programming. Place a 100nF decoupling capacitor within 5mm of VDD, and follow Microchip's recommended oscillator layout for noise immunity.
This page synthesizes verified distributor pricing, drop-in same-package alternatives, and engineering design notes not found in the manufacturer datasheet - giving procurement teams and design engineers a single source for MPN evaluation.
Drop-in-Alternativen für PIC16LF1516T-I/SS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16LF1516T-I/SS (gleiche Bauform und Footprint) – abweichend in Package, ADC, Core Architecture, Operating Temperature, Program Memory (Flash).
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16LF1516-I/SS
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC16F1516T-I/SS
✅ Drop-In✓ Auf Lager
$1.83 / Stück
Datenblatt ansehen →PIC16LF1513T-I/SS
✅ Drop-In✓ Auf Lager
$0.71 / Stück
Datenblatt ansehen →PIC16LF1516T-I/SO
✅ Drop-In✓ Auf Lager
$1.53 / Stück
Datenblatt ansehen →PIC16LF1516-E/SO
✅ Drop-In✓ Auf Lager
$1.45 / Stück
Datenblatt ansehen →PIC16LF1516T-I/SS Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit Microcontroller (MCU) |
| Core Architecture | PIC16 enhanced mid-range (RISC), 49 instructions, 16 stack levels |
| Program Memory | 14 KB Flash (8K x 14 words), self-read/write |
| Data RAM | 512 bytes |
| Max CPU Speed | 20 MHz (5 MIPS) |
| Supply Voltage (VDD) | 1.8 V to 3.6 V |
| Betriebstemperatur | -40C to +85C (Industrial, "-I") |
| Gehäuse | 28-pin SSOP (0.209 inch / 5.30 mm body, "SS") |
| Montageart | Surface Mount |
| Packaging Format | Tape and Reel ("T" suffix) |
| ADC | 10-bit, up to 17 channels |
| CCP / ECCP Modules | 2x CCP + 1x ECCP |
| Communication Interfaces | MI2C, SPI, EUSART |
| Internal Oscillator | 16 MHz |
| Technology Family | PIC16LF1516 (XLP nanoWatt) |
| RoHS-Status | Compliant |
PIC16LF1516T-I/SS Pin-Konfiguration
| Pin 1 | MCLR/VPP/RE3 — Master Clear (reset) input / programming voltage / digital I/O RE3 |
| Pin 2 | RA0/AN0/ULPWU — Digital I/O RA0 / analog input AN0 / ultra-low-power wake-up |
| Pin 3 | RA1/AN1 — Digital I/O RA1 / analog input AN1 |
| Pin 4 | RA2/AN2 — Digital I/O RA2 / analog input AN2 |
| Pin 5 | RA3/AN3/VREF+ — Digital I/O RA3 / analog input AN3 / ADC positive reference |
| Pin 6 | RA4/AN4 — Digital I/O RA4 / analog input AN4 |
| Pin 7 | RA5/AN5/SS — Digital I/O RA5 / analog input AN5 / SPI slave select |
| Pin 8 | VSS — Ground reference |
| Pin 9 | RA7/OSC1/CLKIN — Digital I/O RA7 / crystal oscillator input / external clock in |
| Pin 10 | RA6/OSC2/CLKOUT — Digital I/O RA6 / crystal oscillator output / clock out |
| Pin 11 | RC0/SOSCO — Digital I/O RC0 / secondary oscillator output (32.768 kHz) |
| Pin 12 | RC1/SOSCI — Digital I/O RC1 / secondary oscillator input (32.768 kHz) |
| Pin 13 | RC2/AN6 — Digital I/O RC2 / analog input AN6 |
| Pin 14 | RC3/AN7 — Digital I/O RC3 / analog input AN7 |
| Pin 15 | RC4/AN8 — Digital I/O RC4 / analog input AN8 |
| Pin 16 | RC5/AN9 — Digital I/O RC5 / analog input AN9 |
| Pin 17 | RC6/AN10 — Digital I/O RC6 / analog input AN10 |
| Pin 18 | RC7/AN11 — Digital I/O RC7 / analog input AN11 |
| Pin 19 | VSS — Ground reference (second VSS pin) |
| Pin 20 | VDD — Positive supply voltage (1.8V to 3.6V) |
| Pin 21 | RB0/AN12 — Digital I/O RB0 / analog input AN12 |
| Pin 22 | RB1/AN13 — Digital I/O RB1 / analog input AN13 |
| Pin 23 | RB2/AN14 — Digital I/O RB2 / analog input AN14 |
| Pin 24 | RB3/AN15 — Digital I/O RB3 / analog input AN15 |
| Pin 25 | RB4/AN16 — Digital I/O RB4 / analog input AN16 |
| Pin 26 | RB5/AN17 — Digital I/O RB5 / analog input AN17 |
| Pin 27 | RB6/ICSPCLK — Digital I/O RB6 / ICSP clock |
| Pin 28 | RB7/ICSPDAT — Digital I/O RB7 / ICSP data |
Typische Anwendungen
PIC16LF1516T-I/SS ist geeignet für 7 Anwendungs: Battery-Powered IoT Sensor Nodes, Industrial Control Logic / PLC Modules, Home Appliance User Interface, Automotive Body Controllers (Non-Safety), Remote Controls and Wireless Key FOBs, Wearable Health Monitoring Devices, Power Metering and Energy Monitoring.
Battery-Powered IoT Sensor Nodes
The PIC16LF1516T-I/SS is ideal for battery-powered IoT sensor nodes because of its 1.8-3.6V wide supply and nanoWatt XLP technology that holds sleep current at sub-microampere levels. Its 17-channel 10-bit ADC multiplexes temperature, humidity, light, and battery-voltage sensors without external analog switches. The 14KB Flash stores local buffering and OTA update routines; 512B RAM handles short message queues. Place it between a 3V coin cell and a low-power radio module, using MI2C/SPI to bridge sensors and the radio. Compared to PIC16F1455 it offers 3x more ADC channels and double the Flash, enabling multi-sensor fusion nodes that run for years on a single CR2032.
Empfohlen
Industrial Control Logic / PLC Modules
The PIC16LF1516T-I/SS serves industrial 24V-bus logic controllers and PLC sub-modules where its -40C to +85C industrial range and 17 ADC inputs handle analog process variables. Two CCP and one ECCP modules drive PWM outputs for valve control, motor speed, or LED indicators while MI2C/SPI/EUSART connect to remote I/O expanders and HMI displays. The 14KB Flash fits deterministic ladder-logic replacement code, and 20MHz throughput handles 5 MIPS of scan-time work. Use an external LDO (e.g., MCP1700) to step 24V down to 3.3V for VDD. Compared to PIC16LF1517, the 28-pin SSOP saves PCB area in DIN-rail modules.
Empfohlen
Home Appliance User Interface
The PIC16LF1516T-I/SS is well-suited for home appliance UI boards (washing machines, microwaves, dishwashers) because its 28 I/O pins directly drive 7-segment displays, keypad matrices, indicator LEDs, and buzzer control. Two CCP plus one ECCP handle PWM for backlight dimming and triac-fired heater regulation. The 14KB Flash stores menu logic and EEPROM emulation for user preferences, while 512B RAM holds runtime state. With MI2C it bridges to a capacitive touch controller and with EUSART to a main appliance MCU. The 28-SSOP slim body fits behind appliance panel cutouts.
Empfohlen
Automotive Body Controllers (Non-Safety)
The PIC16LF1516T-I/SS fits non-safety automotive body controllers (window lift, mirror adjust, ambient lighting) where 1.8-3.6V supply aligns with vehicle 12V-buck derived rails and 28-SSOP withstands engine-bay thermal stress up to +85C. Its 17 ADC channels read position feedback from Hall sensors and potentiometers, while two CCP modules generate PWM for motor direction control. MI2C connects to seat-control master ECUs; SPI drives LED drivers for ambient lighting. Note: this part is not AEC-Q100 qualified - for safety-relevant ECUs use the PIC16F1516-E/SS or PIC16F1516T-I/SS automotive variants. Pin-compatible at 28-SSOP.
Empfohlen
Remote Controls and Wireless Key FOBs
The PIC16LF1516T-I/SS works well in remote controls and wireless key FOBs thanks to nanoWatt XLP sleep mode that extends coin-cell life past one year. The 14KB Flash stores protocol stacks (KEELOQ, custom RF), while two CCP modules generate PWM for IR transmission and SPI drives a sub-GHz or BLE radio module. 17 ADC channels monitor battery voltage and user-button analog inputs without external multiplexing. Compared to PIC16LF1455 it has 4x more Flash for proprietary encryption routines, while the 28-SSOP fits inside slim key-fob enclosures.
Empfohlen
Wearable Health Monitoring Devices
The PIC16LF1516T-I/SS is a strong fit for wearable health monitors (heart-rate straps, pulse oximeters, fitness bands) due to its 1.8-3.6V supply that operates directly from small Li-ion cells, nanoWatt XLP sleep current below 1uA, and 17 ADC inputs that read photodiode PPG signals, motion sensors, and skin temperature. The 14KB Flash stores PPG algorithms and BLE profiles; 512B RAM handles real-time sample buffers. MI2C interfaces to optical sensors and SPI to a low-power accelerometer. The 28-SSOP is slim enough to fit inside a wristband PCB. Compared to PIC16LF1507, it adds 3x the Flash for advanced DSP filtering.
Empfohlen
Power Metering and Energy Monitoring
The PIC16LF1516T-I/SS integrates well into single-phase power meters and energy-monitoring submetering, where its 17-channel 10-bit ADC samples current-transformer and shunt-resistor signals with 20MHz throughput for real-time RMS calculation. MI2C connects to a front-end AFE for line-voltage sensing; SPI drives a segmented LCD or LED display; EUSART forwards kWh telemetry to a concentrator. The 14KB Flash fits calibration tables and power-quality algorithms; 512B RAM handles sliding-window RMS buffers. The 1.8-3.6V supply aligns with rectified mains-derived rails. Compared to PIC16LF1517 it saves cost in compact 28-pin SSOP layouts.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16LF1516T-I/SS – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16LF1516-I/SS | PIC16F1516T-I/SS | PIC16LF1513T-I/SS | PIC16LF1516T-I/SO | PIC16LF1516-E/SO |
|---|---|---|---|---|---|---|
| Package | 28-SSOP | 28-SSOP (tube packaging) | 28-SSOP | 28-SSOP | 28-SOIC | 28-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 14 KB | 14 KB | 14 KB | 8 KB | 14 KB | 14 KB |
| RAM | 512 B | 512 B | 512 B | 512 B | 512 B | 512 B |
| Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| ADC Channels | 17 x 10-bit | 17 x 10-bit | 17 x 10-bit | 12 x 10-bit | 17 x 10-bit | 17 x 10-bit |
| Max CPU Speed | 20 MHz (5 MIPS) | 20 MHz (5 MIPS) | 20 MHz (5 MIPS) | 20 MHz (5 MIPS) | 20 MHz (5 MIPS) | 20 MHz (5 MIPS) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) |
| Communication Interfaces | MI2C, SPI, EUSART | MI2C, SPI, EUSART | MI2C, SPI, EUSART | MI2C, SPI, EUSART | MI2C, SPI, EUSART | MI2C, SPI, EUSART |
Wichtigste Unterscheidungsmerkmale
- Highest ADC channel count in 28-pin PIC16F151x family (vs. PIC16LF1513T-I/SS)
- Lowest supply voltage range with full 20 MHz operation (vs. PIC16F1516T-I/SS)
- Tape-and-reel factory packaging for high-volume SMT (vs. PIC16LF1516-I/SS)
Designhinweise
Place a 100 nF decoupling capacitor within 5 mm of the VDD pin (pin 20) and a bulk 10 uF tantalum or ceramic at the board power-entry point. The PIC16LF1516's nanoWatt XLP technology holds sleep current below 1 uA when peripherals are disabled - use Sleep mode aggressively between ADC samples to extend battery life in IoT applications. For 24V industrial rails, derive 3.3V via an MCP1700 LDO placed within 10 mm of VDD, with the input cap rated 25V minimum.
Route the ICSP pins RB6/ICSPCLK (pin 27) and RB7/ICSPDAT (pin 28) to a 6-pin header (with MCLR/VPP on pin 1) for MPLAB Snap/PICkit programming - never populate these pins with permanent loads that prevent in-circuit debugging. Place the 28-SSOP footprint on the top side with no traces under the body; keep a copper keepout zone around the crystal traces (RA6/OSC2 and RA7/OSC1) to minimize stray capacitance. Use a 4-layer stackup with a continuous ground plane under the MCU to reduce EMI.
Do not apply 5V signals to the PIC16LF1516 (LF variant) - maximum VDD is 3.6V. For 5V-tolerant designs, choose PIC16F1516T-I/SS (2.3-5.5V) instead. The MCLR/VPP/RE3 pin (pin 1) is the only 5V-tolerant input on the LF variant; do not float MCLR - tie it to VDD through a 10 kohm resistor. Avoid exceeding 20 MHz CPU clock at voltages below 2.7V (HF oscillator mode requires VDD >= 2.7V; below that use LF or MF modes at 4 MHz or less).
Estimated: The 28-SSOP package has theta_JA of approximately 95 C/W (per Microchip packaging thermal data). At maximum power consumption (CPU active at 20 MHz, all peripherals on, ADC sampling) typical VDD current is 4 mA - dissipation 14.4 mW at 3.6V produces a junction rise of 1.4C above ambient. Even at -40C ambient the part operates 100C below the +150C absolute maximum. No heatsink or thermal copper pour is required.
Compliance-Informationen
RoHS compliant and halogen-free per Microchip product page. Not AEC-Q100 qualified - for safety-relevant automotive applications use PIC16F1516 automotive-grade variants (AEC-Q100 qualified, separate ordering code). Lead-free matte-tin plating on SSOP terminations.
