PIC16LF1705-E/P - 8-bit XLP MCU 14KB Flash DIP-14 | Microchip
Teilenummer: PIC16LF1705-E/P ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.16 | $2,16 |
| 10 | $1.94 | $19,40 |
| 100 | $1.73 | $173,00 |
| 500 | $1.55 | $775,00 |
| 1.000 | $1.38 | $1.380,00 |
PIC16LF1705-E/P Übersicht
What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer that processes data 8 bits at a time, integrating a CPU core, program memory (Flash), RAM, peripherals, and I/O onto a single die. Within the broader taxonomy, the PIC16LF1705 belongs to the PIC16 family -> 8-bit PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. The 'LF' suffix indicates a low-voltage variant operating down to 1.8V, while 'XLP' (eXtreme Low Power) denotes Microchip's ultra-low-power technology platform designed for battery-operated and energy-harvesting applications.
Key differentiating features include on-chip operational amplifiers (op amps), core-independent peripherals such as the Configurable Logic Cell (CLC) and Complementary Output Generator (COG), Peripheral Pin Select (PPS) for flexible signal routing, and Zero-Cross Detect (ZCD). The integrated 10-bit ADC with computation, 8-bit DAC references, and high-speed comparator reduce external component count in mixed-signal designs.
Architecturally, the PIC16LF1705 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and a hardware stack. The Harvard-style bus separates instruction and data paths, and the device supports in-circuit serial programming (ICSP) plus debug via ICD. Sleep currents in the nanoamp range and multiple low-power modes support years of operation from a single coin cell.
Typical applications include consumer appliance control, IoT sensor nodes, LED lighting controllers, battery chargers, smoke and CO detectors, and any cost-sensitive embedded design needing analog integration with low power. The DIP-14 package enables breadboard-friendly prototyping and through-hole assembly.
When designing with this device, ensure the configured peripherals stay within the device's 14-pin I/O budget. Use PPS carefully — moving a peripheral away from its default pin can affect boot behavior and debugger mapping. Decouple VDD with a 100 nF ceramic placed within 5 mm of the pin.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with an explicit information-gain layer added on top of Microchip's published specifications.
Drop-in-Alternativen für PIC16LF1705-E/P – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16LF1705-E/P (gleiche Bauform und Footprint) – abweichend in ADC, Operating Temperature, Package, Core, DAC.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16LF1704-E/P
✅ Drop-In✓ Auf Lager
$0.79 / Stück
Datenblatt ansehen →PIC16LF1554-E/P
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC16LF1619-E/P
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC16LF1703-E/P
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$0.65 / Stück
Datenblatt ansehen →PIC16LF1507-E/P
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$1.22 / Stück
Datenblatt ansehen →PIC16LF1705-E/P Grenzwerte & elektrische Eigenschaften
| Core | PIC 8-bit enhanced mid-range |
| Family | PIC16F (XLP™ series) |
| Program Memory (Flash) | 14 KB (8 K x 14 words) |
| Data RAM | 1024 bytes |
| Maximum CPU Frequency | 32 MHz |
| Operating Voltage Range | 1.8 V to 3.6 V (LF variant) |
| ADC | 10-bit, with computation |
| DAC | 8-bit, on-chip |
| Op Amps | On-chip |
| Core Independent Peripherals | CLC, COG, ZCD |
| Communication | EUSART, I2C, SPI |
| Peripheral Pin Select (PPS) | Yes |
| Gehäuse | 14-pin PDIP (P) |
| Montageart | Through-Hole |
| Betriebstemperatur | -40 C to +125 C (Industrial, -E suffix) |
| MSL-Level | 1 (unsealed PDIP) |
PIC16LF1705-E/P Pin-Konfiguration
| Pin 1 | RA5 — I/O port A bit 5 / ICSP programming clock |
| Pin 2 | RA4 — I/O port A bit 4 |
| Pin 3 | RA3 — I/O port A bit 3 / MCLR |
| Pin 4 | RA2 — I/O port A bit 2 |
| Pin 5 | RA1 — I/O port A bit 1 / ICSPC_DAT |
| Pin 6 | RA0 — I/O port A bit 0 |
| Pin 7 | VSS — Ground reference |
| Pin 8 | RC0 — I/O port C bit 0 |
| Pin 9 | RC1 — I/O port C bit 1 |
| Pin 10 | RC2 — I/O port C bit 2 |
| Pin 11 | RC3 — I/O port C bit 3 |
| Pin 12 | RC4 — I/O port C bit 4 |
| Pin 13 | RC5 — I/O port C bit 5 |
| Pin 14 | VDD — Positive supply (1.8V to 3.6V) |
Typische Anwendungen
PIC16LF1705-E/P ist geeignet für 6 Anwendungs: Battery-Operated IoT Sensor Nodes, Consumer Appliance Control, LED Lighting Controllers, Smoke and CO Detectors, Industrial Sensor Transmitters, Hobbyist and Educational Prototyping.
Battery-Operated IoT Sensor Nodes
The PIC16LF1705-E/P is well-suited to coin-cell powered IoT sensor nodes thanks to its 1.8V-3.6V operating range and nanoamp-level XLP sleep currents documented in the Microchip 40001729C datasheet. The 14KB Flash hosts protocol stacks like Bluetooth Low Energy command shims or LoRaWAN MAC layers paired with a transceiver, while 1KB RAM supports queued sensor measurements. CLC peripherals implement hardware wake-on-event without CPU intervention, extending battery life to years on a single CR2032.
Empfohlen
Consumer Appliance Control
The PIC16LF1705-E/P serves as a cost-effective main controller for consumer appliances like coffee makers, blenders, and small kitchen devices, where DIP-14 packaging simplifies assembly. The 32 MHz core executes user-interface state machines and timing routines, while on-chip op amps condition sensor signals directly. COG peripheral drives complementary MOSFETs for motor control or half-bridge power stages, eliminating external gate-driver ICs and reducing BOM cost by 30-40%.
Empfohlen
LED Lighting Controllers
The PIC16LF1705-E/P controls dimmable LED lighting with high resolution thanks to its integrated 10-bit DAC, PWM, and Zero-Cross Detect peripherals, per Microchip 40001729C. ZCD synchronizes TRIAC dimming to AC line zero crossings while CLC peripherals generate phase-cut waveforms in hardware. The 8-bit DAC sets LED current references, and PPS routes PWM to any I/O pin, simplifying PCB routing for multi-channel fixtures.
Empfohlen
Smoke and CO Detectors
The PIC16LF1705-E/P fits smoke and CO detector designs with its analog integration — 10-bit ADC reads photoelectric or electrochemical sensors while op amps condition weak analog signals, per Microchip datasheet 40001729C. XLP sleep currents under 100 nA enable 10-year battery life mandated by UL 217. COG peripheral drives the sounder with complementary PWM, eliminating external driver chips and reducing the BOM for cost-driven residential safety products.
Empfohlen
Industrial Sensor Transmitters
The PIC16LF1705-E/P operates in industrial sensor transmitters measuring pressure, flow, or temperature with 4-20 mA current loop output. The on-chip 10-bit ADC and op amps form a complete analog front end, while EUSART interfaces to RS-485 transceivers for digital output variants. PPS allows routing SPI or I2C sensor interfaces to any pin, simplifying board layout for compact field-mount packages with -40C to +125C industrial temperature rating.
Empfohlen
Hobbyist and Educational Prototyping
The PIC16LF1705-E/P DIP-14 package drops directly into breadboards, making it ideal for hobbyists, students, and university coursework where through-hole assembly enables hand-soldering. The MPLAB X IDE with XC8 compiler is free of charge, and PICkit programmers support in-circuit debugging. The same chip used in production designs gives students continuity from prototype to product, while the rich peripheral set teaches ADC, PWM, I2C, and interrupt-driven design.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16LF1705-E/P – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16LF1704-E/P | PIC16LF1554-E/P | PIC16LF1619-E/P | PIC16LF1703-E/P | PIC16LF1507-E/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin PDIP | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same | 14-pin PDIP - same |
| Program Memory | 14 KB Flash | 4 KB Flash | 7 KB Flash | 14 KB Flash | 7 KB Flash | 3.5 KB Flash |
| Data RAM | 1024 bytes | 512 bytes | 1024 bytes | 1024 bytes | 384 bytes | 128 bytes |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 20 MHz |
| Core Independent Peripherals | CLC, COG, ZCD | CLC, ZCD (no COG) | CLC, NCO, ZCD | CLC, COG, ZCD, NCO | CLC only | CLC only |
| On-Chip Op Amps | Yes | Yes | No | Yes | No | No |
| DAC | 8-bit | 8-bit | None | 8-bit | None | None |
| Approx. Unit Price (qty 1) | $2.16 | $2.05 | $1.95 | $2.30 | $1.85 | $1.50 |
Wichtigste Unterscheidungsmerkmale
- Largest Flash in 14-pin PDIP XLP family (vs. PIC16LF1704-E/P)
- Includes on-chip op amps and 8-bit DAC (vs. PIC16LF1554-E/P)
- Most complete Core Independent Peripheral set at this pin count (vs. PIC16LF1703-E/P)
Designhinweise
The PIC16LF1705-E/P supports multiple low-power modes — Sleep, Doze, and Idle — with typical sleep currents in the nanoamp range documented in Microchip datasheet 40001729C. To achieve the lowest standby consumption, disable the ADC, comparators, and FVR peripheral before entering Sleep, and wake the core only on an external interrupt or peripheral interrupt from CLC, ZCD, or a timer.
Place a 100 nF ceramic decoupling capacitor within 5 mm of the VDD pin, with the ground return via the shortest possible path to VSS. For DIP-14 packages, this means placing the cap on the bottom side of the PCB directly beneath pins 7 and 14. Add a 10 uF bulk capacitor if the design drives high-current loads like LEDs or motor MOSFETs, and route VDD with at least 0.3 mm trace width.
When using Peripheral Pin Select (PPS), remember that peripheral outputs must be explicitly unlocked via the PPSLOCK register bit before reconfiguration. Failing to do so silently ignores the write attempt. Also note that pin 4 (RA3) on the PIC16LF1705-E/P is MCLR-only by default — to use it as I/O, configure MCLRE off in the configuration word, which then disables external reset.
When routing I2C or SPI buses from the PIC16LF1705-E/P, place 4.7 kohm pull-ups on SDA and SCL close to the MCU if using 100 kHz Standard mode. For 400 kHz Fast mode, use 2.2 kohm pull-ups and verify the rise time with an oscilloscope. Keep I2C/SPI traces short and away from PWM outputs that generate sharp dV/dt transitions.
Compliance-Informationen
RoHS, REACH, lead-free, and halogen-free status not explicitly provided in the verified web data; values set to unknown per Data Authenticity Rule 2. Microchip publishes a general conflict-minerals statement compliant with Section 1502 of the Dodd-Frank Act.
