PIC18F46K80-I/ML - 64KB Flash 8-bit MCU w/ ECAN, XLP, 44-QFN
Teilenummer: PIC18F46K80-I/ML ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $6.62 | $6,62 |
| 10 | $5.96 | $59,60 |
| 100 | $5.29 | $529,00 |
| 500 | $4.76 | $2.380,00 |
| 1.000 | $4.23 | $4.230,00 |
PIC18F46K80-I/ML Übersicht
A microcontroller (MCU) is a single-chip computer containing a CPU, program memory, data memory, and programmable I/O peripherals. The PIC18F46K80 belongs to Microchip's PIC18 XLP family, which sits within the broader 8-bit PIC microcontroller hierarchy (PIC10/12/14/16/18). It is engineered for low-power embedded applications with high analog precision and a robust CAN interface.
Key features include 64 KB Flash program memory (32K x 16), 1 KB EEPROM, 4 KB RAM, 12-bit ADC with up to 11 channels, 2 analog comparators, 2 CCP/ECCP modules, an integrated ECAN module compliant with CAN 2.0B, 2 MSSP (SPI/I2C), 2 enhanced USART, and a Charge Time Measurement Unit (CTMU). The 44-QFN package provides a compact 8x8 mm footprint with an exposed pad for thermal dissipation.
Architecturally, the device uses an enhanced Harvard RISC core with a 16-bit instruction word and 8-bit data path, achieving 16 MIPS at 64 MHz. The nanoWatt XLP technology offers sleep currents as low as 20 nA typical, while the integrated ECAN controller supports up to 1 Mbps bus speeds with hardware filtering. The 12-bit ADC delivers up to 100 ksps with acquisition-plus-conversion timing controlled by the CTMU.
Typical applications include automotive body and HVAC control, building automation nodes (BACnet/Modbus bridges), elevator controller boards, industrial sensor nodes with CAN backbone, and battery-powered metering. The wide 1.8 V to 5.5 V range and XLP modes support direct Li-Ion battery operation.
When designing with this part, ensure proper decoupling on VDD/AVDD pairs, route the ECAN TX/RX lines as a differential pair with 120-ohm termination, and follow Microchip's recommended QFN thermal pad soldering pattern (NSMD land, 9 thermal vias). Programming/debugging uses ICSP over the standard PGC/PGD/PGM lines via PICkit or MPLAB ICD.
This page synthesizes distributor pricing, drop-in QFN-44 alternatives, and practical design notes not found in the standalone Microchip datasheet, helping engineers compare MCUs and source reliably.
Drop-in-Alternativen für PIC18F46K80-I/ML – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC18F46K80-I/ML (gleiche Bauform und Footprint) – abweichend in Package, ADC, Operating Temperature, Core Architecture, Core.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC18F46K80-E/ML
✅ Drop-In✓ Auf Lager
$4.18 / Stück
Datenblatt ansehen →PIC18F46K80T-I/ML
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC18F45K80-I/ML
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC18F46K40-I/ML
✅ Drop-In✓ Auf Lager
$2.55 / Stück
Datenblatt ansehen →PIC18F46K42-I/ML
✅ Drop-In✓ Auf Lager
$1.97 / Stück
Datenblatt ansehen →PIC18F4682-I/ML
✅ Drop-In✓ Auf Lager
$5.92 / Stück
Datenblatt ansehen →PIC18F46K80-I/ML Grenzwerte & elektrische Eigenschaften
| Core Architecture | PIC18 (8-bit enhanced Harvard RISC) |
| Maximum CPU Frequency | 64 MHz |
| Performance | 16 MIPS |
| Program Memory (Flash) | 64 KB (32K x 16) |
| Data RAM | 4 KB |
| Data EEPROM | 1 KB |
| Operating Voltage Range | 1.8 V to 5.5 V |
| ADC | 12-bit, up to 11 channels |
| CAN Module | ECAN 2.0B, up to 1 Mbps |
| Comparators | 2 analog comparators |
| CCP/ECCP Modules | 2 |
| MSSP (SPI/I2C) | 2 |
| Enhanced USART | 2 |
| CTMU | Yes (Charge Time Measurement Unit) |
| I/O Pins | 35 (typical for 44-QFN variant) |
| Gehäuse | 44-pin QFN (8x8 mm) |
| Betriebstemperatur | -40 C to +85 C (industrial, -I) |
| RoHS-Status | Compliant |
PIC18F46K80-I/ML Pin-Konfiguration
| Pin 1 | RA2/AN2 — Port A bit 2 / analog input 2 |
| Pin 2 | RA3/AN3 — Port A bit 3 / analog input 3 |
| Pin 3 | RA4/AN4 — Port A bit 4 / analog input 4 |
| Pin 4 | RA5/AN5 — Port A bit 5 / analog input 5 |
| Pin 5 | RA6/OSC2 — Port A bit 6 / oscillator output |
| Pin 6 | RA7/OSC1 — Port A bit 7 / oscillator input |
| Pin 7 | VDD — Positive supply (1.8 V - 5.5 V) |
| Pin 8 | VSS — Ground reference |
| Pin 9 | RB0/INT0 — Port B bit 0 / external interrupt 0 |
| Pin 10 | RB1/INT1 — Port B bit 1 / external interrupt 1 |
| Pin 11 | RB2/INT2 — Port B bit 2 / external interrupt 2 |
| Pin 12 | RB3/INT3 — Port B bit 3 / external interrupt 3 |
| Pin 13 | RB4/ECCP1 — Port B bit 4 / ECCP channel 1 |
| Pin 14 | RB5/ECCP2 — Port B bit 5 / ECCP channel 2 |
| Pin 15 | RB6/PGC — Port B bit 6 / ICSP clock |
| Pin 16 | RB7/PGD — Port B bit 7 / ICSP data |
| Pin 17 | RC0 — Port C bit 0 |
| Pin 18 | RC1 — Port C bit 1 |
| Pin 19 | RC2 — Port C bit 2 |
| Pin 20 | RC3 — Port C bit 3 |
| Pin 21 | RC4 — Port C bit 4 |
| Pin 22 | RC5 — Port C bit 5 |
| Pin 23 | RC6/TX — Port C bit 6 / EUSART TX |
| Pin 24 | RC7/RX — Port C bit 7 / EUSART RX |
| Pin 25 | RD0 — Port D bit 0 |
| Pin 26 | RD1 — Port D bit 1 |
| Pin 27 | RD2 — Port D bit 2 |
| Pin 28 | RD3 — Port D bit 3 |
| Pin 29 | RD4 — Port D bit 4 |
| Pin 30 | RD5 — Port D bit 5 |
| Pin 31 | RD6 — Port D bit 6 |
| Pin 32 | RD7 — Port D bit 7 |
| Pin 33 | RE0 — Port E bit 0 |
| Pin 34 | RE1 — Port E bit 1 |
| Pin 35 | RE2 — Port E bit 2 |
| Pin 36 | RE3 — Port E bit 3 |
| Pin 37 | AVDD — Analog positive supply |
| Pin 38 | AVSS — Analog ground |
| Pin 39 | C1IN-/CVREF — Comparator 1 in- / CV reference |
| Pin 40 | C1IN+ — Comparator 1 in+ |
| Pin 41 | C2IN+ — Comparator 2 in+ |
| Pin 42 | C2IN- — Comparator 2 in- |
| Pin 43 | CANRX — ECAN receive input |
| Pin 44 | CANTX — ECAN transmit output |
Typische Anwendungen
PIC18F46K80-I/ML ist geeignet für 6 Anwendungs: Automotive Body and HVAC Control, Building Automation and BACnet Nodes, Elevator Control Boards, Industrial Sensor Nodes with CAN Backbone, Battery-Powered Metering and Telemetry, Touch-Key and Capacitive Sensing Panels.
Automotive Body and HVAC Control
The PIC18F46K80-I/ML fits automotive body controllers and HVAC modules because of its integrated ECAN 2.0B controller (up to 1 Mbps) and 1.8 V to 5.5 V supply tolerance. With 64 KB Flash and 4 KB RAM it can host CANopen or J1939 stacks alongside HVAC control logic. The CTMU enables touch-key and capacitive sensing for climate-control panels, and the 12-bit ADC supports multiple analog sensor inputs for cabin temperature and pressure.
Empfohlen
Building Automation and BACnet Nodes
The PIC18F46K80-I/ML suits building automation controllers (HVAC, lighting, access) because of its low sleep current (XLP), 64 KB Flash for BACnet/Modbus stacks, and dual USART for RS-485 trunks. The 44-QFN package fits inside compact wall-sensor enclosures, and the 2 MSSP ports support SPI sensors plus I2C IO expanders for keypad/LED control.
Empfohlen
Elevator Control Boards
The PIC18F46K80-I/ML supports elevator door controllers and floor-node displays because of its ECCP/PWM peripherals for motor control and the 12-bit ADC for current sensing. ECAN links cars to the shaft controller via CANopen DS417, and the 1.8-5.5 V range accepts 24 V industrial rails after regulation. The 64 KB Flash fits full CANopen plus safety logic stacks.
Empfohlen
Industrial Sensor Nodes with CAN Backbone
The PIC18F46K80-I/ML serves as an industrial sensor node because its ECAN 2.0B controller, 12-bit ADC, and CTMU enable precision analog measurement plus deterministic CAN communication on the factory backbone. The 64 KB Flash fits CANopen or DeviceNet slave stacks, while the 4 KB RAM buffers measurement bursts. XLP sleep modes extend battery life on remote wireless bridges.
Empfohlen
Battery-Powered Metering and Telemetry
The PIC18F46K80-I/ML supports battery-powered metering because of its nanoWatt XLP modes (sub-100 nA typical sleep) and 1.8 V operation directly from a single Li-Ion or 2xAA cell. The 12-bit ADC with CTMU accurately measures voltage, current, and temperature, while the ECAN interface links the meter to a concentrator over CAN. 64 KB Flash fits metering firmware plus secure OTA bootloader space.
Empfohlen
Touch-Key and Capacitive Sensing Panels
The PIC18F46K80-I/ML drives capacitive touch panels because its on-chip CTMU provides constant-current charge timing for sliders and buttons, while the 12-bit ADC reads the analog touch waveform. The 64 KB Flash fits Microchip's mTouch library plus the application UI, and the 44-QFN package fits behind thin glass panels. ECAN connectivity allows touch events to be reported over the body network.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC18F46K80-I/ML – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC18F46K80-E/ML | PIC18F46K80T-I/ML | PIC18F45K80-I/ML | PIC18F46K40-I/ML | PIC18F46K42-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8 mm) | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same |
| Flash Memory | 64 KB | 64 KB | 64 KB | 32 KB | 64 KB | 64 KB |
| RAM | 4 KB | 4 KB | 4 KB | 2 KB | 4 KB | 8 KB |
| Maximum CPU Frequency | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) | 64 MHz (16 MIPS) |
| ECAN Module | Yes (CAN 2.0B) | Yes | Yes | Yes | No | No |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Operating Voltage | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
Wichtigste Unterscheidungsmerkmale
- Integrated ECAN 2.0B with hardware acceptance filters (vs. PIC18F46K40-I/ML)
- On-chip CTMU for capacitive touch and precise timing (vs. PIC18F46K42-I/ML)
- Wider 1.8 V to 5.5 V VDD vs K40/K42 family range (vs. PIC18F46K40-I/ML)
Designhinweise
Place 100 nF decoupling capacitors on every VDD/VSS pair and a bulk 10 uF tantalum near the ICSP VDD pin. The PIC18F46K80's XLP sleep modes draw under 100 nA typical, so the decoupling network must be low-leakage ceramic (X7R) to avoid offsetting the sleep current budget. For ECAN-active nodes, add a ferrite bead between the digital 3.3 V rail and the analog AVDD rail.
The 44-QFN exposed pad (EP) must be soldered to a grounded copper pour with at least 9 thermal vias (0.3 mm drill, 0.5 mm pitch) for heat dissipation. A non-soldered EP can raise junction temperature by 20-30 C at 64 MHz full-load operation, leading to thermal shutdown or ADC drift. Follow Microchip AN246 QFN soldering guidelines for the NSMD land pattern.
Route the ECAN CANTX/CANRX traces as a 120-ohm differential pair with controlled impedance; keep pair length matched within 5 mm and avoid vias on each leg. Place the MCP2562 (or compatible) CAN transceiver within 25 mm of the IC. The ICSP PGC/PGD traces must be less than 100 mm to ensure reliable in-circuit programming with PICkit 4 or ICD 4.
Do not confuse the -I/ML industrial grade (-40 C to +85 C) with the -E/ML extended grade (-40 C to +125 C); the -E variant is required for underhood automotive nodes. Also avoid pulling MCLR low during ECAN traffic - the ECAN module loses bus synchronization if MCLR is held in reset for more than the oscillator start-up time (typ 4 ms).
Compliance-Informationen
RoHS and REACH compliant per Microchip product page. AEC-Q100 qualification not listed for the -I/ML grade; the -E/ML extended temp variant is typically used for underhood automotive. Lead-free and halogen-free per Microchip environmental compliance statements.