PIC18F6585-I/L - 8-Bit 40MHz Microcontroller | Microchip
Teilenummer: PIC18F6585-I/L ✗ AbgekündigtPIC18F6585-I/L Übersicht
A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, working memory, peripherals, and I/O in one device. Within the product hierarchy, the PIC18F6585-I/L is an 8-bit RISC microcontroller, a flash-memory MCU, and a member of the PIC18 high-performance embedded-controller family. Its combination of local Flash storage, serial peripherals, and 52 I/O lines allows it to consolidate functions that might otherwise require separate logic and interface devices.
Key device attributes include 48 KB of embedded Flash, 1024 bytes of EEPROM, 3328 bytes of SRAM, and 52 general-purpose I/O lines. The maximum clock frequency is 40 MHz, corresponding to as much as 10 MIPS according to the Microchip product documentation. Integrated CAN support is significant for industrial and automotive-style networks, while I2C, SPI, and UART cover common sensors, converters, displays, transceivers, and service ports.
The PIC18F6585-I/L uses the enhanced-flash PIC18 architecture and an 8-bit instruction set optimized for compact embedded control. Its communications peripherals support multi-node serial systems without requiring separate protocol converters. Programming and debugging are supported through Microchip's PIC18 development ecosystem, including the MPLAB platform and PICkit tools identified on the manufacturer product page.
Typical uses include industrial supervisory controllers, CAN-connected equipment, instrumentation, motor and process-control modules, data-acquisition units, and compact embedded control panels. The 52 I/O lines are useful for discrete digital interfaces, while the four principal serial interfaces allow designers to connect sensors, memory, transceivers, and human-interface equipment while retaining a compact embedded-control architecture.
Design planning should begin with the 68-pin PLCC footprint, power requirements, clock arrangement, and external-interface assignments. PCB layout should keep sensitive signal paths short, provide stable decoupling at the supply pins, and follow the pin-description table in the manufacturer datasheet. Because the manufacturer lists the PIC18F6585 as not recommended for new designs, long-lived or safety-relevant products should confirm lifecycle and validation requirements before committing new production volume.
This product page combines the manufacturer lifecycle statement, catalog memory and interface characteristics, package constraints, drop-in alternatives, comparison parameters, and practical design guidance to support faster component evaluation and sourcing decisions.
Drop-in-Alternativen für PIC18F6585-I/L – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC18F6585-I/L (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, ADC, Core Architecture, Timers.
PIC18F6585-E/L
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC18F8585-I/L
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC18F6585-I/L Grenzwerte & elektrische Eigenschaften
| Microcontroller Type | 8-bit RISC flash microcontroller |
| Maximale Taktfrequenz | 40 MHz |
| Maximum Processing Performance | 10 MIPS |
| Program Flash Memory | 48 KB |
| EEPROM Memory | 1024 bytes |
| SRAM | 3328 bytes |
| General-Purpose I/O Count | 52 |
| Communication Interfaces | CAN, I2C, SPI, and UART |
| Gehäuse | 68-pin PLCC |
| Montageart | Surface mount |
| Temperature Grade | Industrial grade |
| Maximum Operating Frequency | 40 MHz |
| Architecture | Enhanced-flash PIC18 architecture |
| Program Memory Type | Flash |
| Datenbusbreite | 8-bit |
| Development Tool Support | MPLAB and PICkit programming/debug ecosystem |
PIC18F6585-I/L 68-pin plcc Pinbelegungsleitfaden
Pinbelegung für PIC18F6585-I/L (68-pin plcc-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC18F6585-I/L.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC18F6585-I/L ist geeignet für 6 Anwendungs: CAN-Connected Industrial Control, Process and Motor Supervision, Industrial Instrumentation, Data-Acquisition Controller, Embedded Communications Gateway, Legacy Equipment Retrofit.
CAN-Connected Industrial Control
The PIC18F6585-I/L fits CAN-connected industrial controllers because it combines an integrated CAN interface with 48 KB of Flash, 3328 bytes of SRAM, and 52 I/O lines at a maximum clock of 40 MHz. The MCU can execute acquisition, supervisory, and actuator-control logic while exchanging status and commands over a CAN network. A matching 68-pin PLCC footprint supports controlled redesigns of legacy boards, while the I2C, SPI, and UART peripherals provide additional channels for local sensors, memories, and service interfaces. External CAN transceivers, network termination, filtering, and fault-safe power design remain essential parts of the complete communication node.
Empfohlen
Process and Motor Supervision
The PIC18F6585-I/L is suitable for process and motor supervisory modules that combine local digital control with serial communications. Its 52 I/O lines can support switches, discrete sensors, status indicators, and output stages, while the 40 MHz maximum operating frequency provides up to 10 MIPS for coordinated control tasks. UART can serve a local operator interface, I2C can connect digital sensors, and SPI can support faster external converters or storage. The 68-pin PLCC package provides a defined migration footprint, but designers must verify pin multiplexing, interrupt requirements, and timing before using it in a new motor-control design.
Empfohlen
Industrial Instrumentation
The PIC18F6585-I/L suits compact industrial instrumentation where measurement, front-panel control, and service communications must share one microcontroller. Its 48 KB embedded Flash can hold application firmware, calibration tables, and communication routines, while 3328 bytes of SRAM supports working buffers and protocol state. The 52 I/O lines simplify discrete front-panel and alarm interfaces, and I2C, SPI, UART, and CAN expand the available peripheral connections. Designers should budget decoupling capacitors, a stable clock source, and clean signal routing. Confirm the device's detailed electrical limits and pin assignments in the manufacturer datasheet before layout release.
Empfohlen
Data-Acquisition Controller
The PIC18F6585-I/L can act as the control and communications hub in a distributed data-acquisition module. The integrated I2C and SPI peripherals can interface with sensors and converters, UART or CAN can aggregate measurements with a host system, and 52 I/O lines can manage triggers, range selects, and status signals. At up to 40 MHz, the 8-bit core provides up to 10 MIPS for sampling coordination and buffering, with 48 KB of Flash for application code. The architecture is particularly practical for maintaining firmware continuity in established 68-pin PLCC industrial platforms; new mixed-signal boards should perform signal-integrity and grounding reviews.
Empfohlen
Embedded Communications Gateway
The PIC18F6585-I/L can bridge local equipment and a higher-level communication network by translating between serial peripherals and CAN. Its 48 KB Flash accommodates protocol handlers and application logic, while 3328 bytes of SRAM supports message buffers and state management. I2C and SPI can connect to local sensors or transceivers, UART can provide a configuration channel, and 52 I/O lines can expose gateway status. The 68-pin PLCC package makes the device relevant to established embedded platforms, although lifecycle planning is essential because Microchip identifies the PIC18F6585 as not recommended for new designs.
Empfohlen
Legacy Equipment Retrofit
The PIC18F6585-I/L is well positioned for retrofitting established equipment that already uses a compatible 68-pin PLCC footprint and requires the same core memory and peripheral set. It retains 48 KB of Flash, 3328 bytes of SRAM, 52 I/O lines, and CAN, I2C, SPI, and UART, allowing firmware to preserve familiar interfaces while adding local coordination. This approach is most valuable for maintenance-oriented or already validated platforms rather than unrestricted new development. Before substitution, compare oscillator circuits, interrupt vectors, peripheral multiplexing, supply requirements, and programming configuration with the original device, and obtain lifecycle confirmation for the intended production period.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC18F6585-I/L – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC18F6585-E/L | PIC18F8585-I/L |
|---|---|---|---|
| Package | PLCC-68 | PLCC-68 | PLCC-68 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit PIC18 RISC | 8-bit PIC18 RISC | 8-bit PIC18 RISC |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz |
| Program Flash Memory | 48 KB | 48 KB | 64 KB |
| SRAM | 3328 bytes | 3328 bytes | 3328 bytes |
| General-Purpose I/O Count | 52 | 52 | 52 |
| Communication Interfaces | CAN, I2C, SPI, UART | CAN, I2C, SPI, UART | CAN, I2C, SPI, UART |
| Temperature Grade | Industrial grade | Extended grade | Industrial grade |
Wichtigste Unterscheidungsmerkmale
- Lower Flash capacity than the larger-memory family option (vs. PIC18F8585-I/L)
- Industrial-grade ordering matches the target lifecycle application (vs. PIC18F6585-E/L)
- Four integrated serial interfaces reduce external protocol-converter overhead (vs. PIC18C658-I/L)
Designhinweise
Use the manufacturer pin-description table for the 68-pin PLCC variant when assigning every power, ground, programming, clock, I/O, and peripheral signal. Place the required bypass capacitors adjacent to their associated supply pins and keep the exposed traces short. Because this package has a fine-pitch lead configuration, verify annular rings, solder-mask clearance, thermal relief, and assembly-planar spacing against the board fabrication rules before release.
Confirm the exact supply-voltage limits, operating-temperature limits, and peripheral pin-state requirements from the manufacturer datasheet for the selected ordering code. Separate noisy actuator or communication-driver returns from sensitive digital and reference grounds, and provide local filtering for external transceivers. A CAN node also requires correct transceiver selection, termination, common-mode handling, and protection; the MCU's CAN peripheral alone does not provide the physical network interface.
Do not treat PIC18F6585-I/L, PIC18F6585-E/L, and PIC18F6585-I/PT as interchangeable solely because their base device name matches. The I/L and E/L parts use the 68-pin PLCC format, whereas I/PT uses a TQFP package. Before replacing the target, compare package dimensions, pin numbering, oscillator pins, programming pins, peripheral multiplexing, voltage limits, and interrupt behavior. These checks are especially important for firmware that depends on peripheral pin multiplexing.
Keep the oscillator path, programming interface, and communication lines away from switching-power nodes and high-current return paths. Use a continuous ground reference under the device where the package and board design permit, and route serial interfaces according to their signal type rather than applying one layout pattern to I2C, SPI, UART, and CAN. Validate timing margins at 40 MHz and use the manufacturer's application guidance when adding external clock, reset, or memory circuitry.
Compliance-Informationen
The manufacturer product page identifies PIC18F6585 as not recommended for new designs. Specific environmental, lead-free, halogen-free, conflict-minerals, and automotive qualification declarations were not established and remain unknown.