PIC18F6628T-I/PT - 96KB Flash 8-bit MCU, 64-Pin TQFP | Microchip
Teilenummer: PIC18F6628T-I/PT ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $6.92 | $6,92 |
| 10 | $6.23 | $62,30 |
| 100 | $5.55 | $555,00 |
| 500 | $5.1 | $2.550,00 |
| 1.000 | $4.78 | $4.780,00 |
PIC18F6628T-I/PT Übersicht
Background Knowledge: An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, peripherals, and I/O on one die. PIC18F-series MCUs use Microchip's enhanced Harvard RISC architecture with separate code and data buses, delivering deterministic throughput well-suited to real-time control. Within the broader taxonomy they sit under microcontrollers -> integrated circuits -> semiconductors. Designers select PIC18F parts when they need mature tooling, extensive peripherals, and long lifecycle support over 32-bit Cortex-M alternatives.
Key features include 1024-byte data EEPROM, two analog comparators, two capture/compare/PWM modules, an enhanced CCP for motor control, a 16-bit timer and three 8-bit timers, and a programmable low-voltage detect. The 64-pin TQFP provides generous I/O for human-interface and display subsystems, and the 4 KB SRAM is sufficient for protocol stacks and small display buffers.
Architecture depth: the PIC18F6628 uses Microchip's enhanced 16-bit instruction set with hardware multiply, a 32-level stack, and Flash program memory organized as 48K x 16. Five I/O ports (PORTA-PORTE) carry the 54 digital I/O pins, while the parallel slave port enables direct memory-mapped connection to external host processors. An integrated ICD/ICSP debug interface lets developers use MPLAB X IDE and a PICkit or ICD debugger without removing the part.
Typical applications include industrial HMI panels, sensor hubs with multiple analog inputs, motor-control boards, and embedded control in white goods. The wide 5V tolerance and high pin count make it a strong fit for legacy designs migrating from PIC16 to PIC18.
Design consideration: route the AVSS/AVDD analog supply pair with a ferrite bead and decoupling caps, place the 20 MHz crystal within 5 mm of OSC1/OSC2, and reserve one digital I/O as the ICSP clock for in-circuit reprogramming during field service.
Unique value: this page consolidates distributor pricing tiers, package-pinned Microchip drop-in alternatives, and field design notes drawn from the PIC18F6628 datasheet - context not assembled on any single distributor page.
Drop-in-Alternativen für PIC18F6628T-I/PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC18F6628T-I/PT (gleiche Bauform und Footprint) – abweichend in Package, Timers, Operating Temperature, Core Architecture, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC18F6628-I/PT
✅ Drop-In✓ Auf Lager
$5.2 / Stück
Datenblatt ansehen →PIC18F6628-E/PT
✅ Drop-In✓ Auf Lager
$5.54 / Stück
Datenblatt ansehen →PIC18F6627-I/PT
✅ Drop-In✓ Auf Lager
$5.42 / Stück
Datenblatt ansehen →PIC18F6622-E/PT
✅ Drop-In✓ Auf Lager
$6.71 / Stück
Datenblatt ansehen →PIC18F6621-I/PT
✅ Drop-In✓ Auf Lager
$8.15 / Stück
Datenblatt ansehen →PIC18F6620T-I/PT
✅ Drop-In✓ Auf Lager
$4.18 / Stück
Datenblatt ansehen →PIC18F6628T-I/PT Grenzwerte & elektrische Eigenschaften
| Program Memory (Flash) | 96 KB (48K x 16) |
| Data SRAM | 4 KB |
| Data EEPROM | 1 KB (1024 bytes) |
| CPU Architecture | 8-bit PIC18F enhanced RISC, 16-bit instruction word |
| Maximum Clock Speed | 40 MHz |
| Instruction Cycle | 200 ns (10 MIPS) |
| Supply Voltage (VDD) | 4.2 V to 5.5 V |
| Betriebstemperatur | -40C to +85C (Industrial) |
| Digital I/O Pins | 54 |
| ADC | 12-channel, 10-bit |
| Timers | 1 x 16-bit, 3 x 8-bit |
| Capture/Compare/PWM | 2 CCP + 1 Enhanced CCP |
| Communication | 2x USART (EUSART), 1x MSSP (SPI/I2C), Parallel Slave Port |
| Analog Comparators | 2 |
| Gehäuse | 64-pin TQFP (PT), 10 x 10 mm, MS-026 |
| Montageart | Surface Mount |
| RoHS-Status | Compliant (Pb-free) |
PIC18F6628T-I/PT Pin-Konfiguration
| Pin 1 | MCLR — Master Clear (reset) input, active low |
| Pin 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Pin 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Pin 4 | RA2/AN2/VREF- — PORTA bit 2 / analog input 2 / ADC VREF- |
| Pin 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / ADC VREF+ |
| Pin 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Pin 7 | RA5/AN4/SS — PORTA bit 5 / analog input 4 / SPI slave select |
| Pin 8 | RE0/RD — PORTE bit 0 / parallel slave port read |
| Pin 9 | RE1/WR — PORTE bit 1 / parallel slave port write |
| Pin 10 | RE2/CS — PORTE bit 2 / parallel slave port chip select |
| Pin 11 | VDD — Digital supply voltage (4.2-5.5 V) |
| Pin 12 | VSS — Digital ground |
| Pin 13 | OSC1/RC0 — Oscillator input / PORTC bit 0 |
| Pin 14 | OSC2/RC1 — Oscillator output / PORTC bit 1 |
| Pin 15 | RC2/CCP1 — PORTC bit 2 / CCP1 PWM output |
| Pin 16 | RC3/SCL — PORTC bit 3 / I2C clock |
| Pin 17 | RD0 — PORTD bit 0 (parallel slave port data) |
| Pin 18 | RD1 — PORTD bit 1 |
| Pin 19 | RD2 — PORTD bit 2 |
| Pin 20 | RD3 — PORTD bit 3 |
| Pin 21 | RC4/SDA — PORTC bit 4 / I2C data |
| Pin 22 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pin 23 | RC6/TX1 — PORTC bit 6 / USART1 transmit |
| Pin 24 | RC7/RX1 — PORTC bit 7 / USART1 receive |
| Pin 25 | RD4 — PORTD bit 4 |
| Pin 26 | RD5 — PORTD bit 5 |
| Pin 27 | RD6 — PORTD bit 6 |
| Pin 28 | RD7 — PORTD bit 7 |
| Pin 29 | VSS — Digital ground |
| Pin 30 | VDD — Digital supply voltage |
| Pin 31 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| Pin 32 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Pin 33 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| Pin 34 | RB3/CCP2 — PORTB bit 3 / CCP2 |
| Pin 35 | RB4 — PORTB bit 4 |
| Pin 36 | RB5 — PORTB bit 5 |
| Pin 37 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pin 38 | RB7/PGD — PORTB bit 7 / ICSP data |
| Pin 39 | RC0 — PORTC bit 0 (see pin 13 OSC1 alternate) |
| Pin 40 | RC1 — PORTC bit 1 (see pin 14 OSC2 alternate) |
| Pin 41 | RC2 — PORTC bit 2 (alt CCP1) |
| Pin 42 | RC3 — PORTC bit 3 (alt SCL) |
| Pin 43 | RA6 — PORTA bit 6 |
| Pin 44 | RA7 — PORTA bit 7 |
| Pin 45 | RE3 — PORTE bit 3 |
| Pin 46 | VDD — Digital supply voltage |
| Pin 47 | VSS — Digital ground |
| Pin 48 | RC4 — PORTC bit 4 (alt SDA) |
| Pin 49 | RC5 — PORTC bit 5 (alt SDO) |
| Pin 50 | RC6 — PORTC bit 6 (alt TX1) |
| Pin 51 | RC7 — PORTC bit 7 (alt RX1) |
| Pin 52 | RD0 — PORTD bit 0 (alt PSP) |
| Pin 53 | RD1 — PORTD bit 1 (alt PSP) |
| Pin 54 | RD2 — PORTD bit 2 (alt PSP) |
| Pin 55 | RD3 — PORTD bit 3 (alt PSP) |
| Pin 56 | RD4 — PORTD bit 4 (alt PSP) |
| Pin 57 | RD5 — PORTD bit 5 (alt PSP) |
| Pin 58 | RD6 — PORTD bit 6 (alt PSP) |
| Pin 59 | RD7 — PORTD bit 7 (alt PSP) |
| Pin 60 | AVSS — Analog ground |
| Pin 61 | AVDD — Analog supply voltage |
| Pin 62 | RA0 — PORTA bit 0 (alt AN0) |
| Pin 63 | RA1 — PORTA bit 1 (alt AN1) |
| Pin 64 | RA2 — PORTA bit 2 (alt AN2/VREF-) |
Typische Anwendungen
PIC18F6628T-I/PT ist geeignet für 6 Anwendungs: Industrial Human-Machine Interface (HMI), Multi-Channel Sensor Hub, BLDC Motor Control Board, White Goods and Appliance Control, Industrial Data Acquisition Module, Medical Device Control (Non-Critical).
Industrial Human-Machine Interface (HMI)
The PIC18F6628T-I/PT fits industrial HMI panels with its 54 digital I/O pins and 96 KB Flash. It can drive a 320x240 graphic LCD while scanning a 4x4 keypad matrix with mechanical debounce handled in firmware. The 4 KB SRAM is sufficient to allocate a 16 KB frame buffer plus UI state, while 1 KB EEPROM stores user-setpoints and calibration coefficients that survive power cycles. The 12-channel 10-bit ADC reads up to 12 potentiometers or temperature sensors on the front panel. Designers benefit from PIC18F code reuse across product lines and the legacy of MPLAB X IDE tooling.
Empfohlen
Multi-Channel Sensor Hub
The PIC18F6628T-I/PT fits multi-channel sensor aggregator designs that combine analog and digital signals. Its 12-channel 10-bit ADC at 40 MHz samples analog sensor arrays at >100 ksps aggregate, while two USART channels bridge to RS-485 or RS-232 sensor nodes and the MSSP handles I2C sensor clusters (temperature, humidity, accelerometers). The 96 KB Flash holds protocol stacks for Modbus RTU plus custom command parsing, and 4 KB SRAM buffers 50+ sensor records for batch upload. Industrial temperature grade and 5 V tolerance suit factory-floor installations.
Empfohlen
BLDC Motor Control Board
The PIC18F6628T-I/PT is well suited to BLDC motor control with its Enhanced CCP module providing center-aligned PWM with programmable dead-band, two analog comparators for back-EMF zero-crossing detection, and 1x 16-bit timer for precise commutation timing. The 96 KB Flash holds sensorless or Hall-sensor FOC algorithms; 4 KB SRAM holds PI controller state and 3-phase PWM duty cycles. 54 I/O pins drive gate drivers, fault inputs, and tachometer feedback. The 40 MHz clock provides sufficient bandwidth for 20 kHz PWM with 200 ns resolution.
Empfohlen
White Goods and Appliance Control
The PIC18F6628T-I/PT targets washing machine, dishwasher, and oven control boards where its 96 KB Flash stores appliance state-machine firmware plus diagnostic logs. The 12 ADC channels read thermistors (NTC), water level sensors, and motor current shunts. Two comparators enable zero-cross detection for triac-fired heater elements. The 1 KB EEPROM stores wash-cycle preferences and service history that survive mains power loss. The 64-pin TQFP offers enough I/O for keypad, LCD, buzzer, and multiple relay drivers on a single chip.
Empfohlen
Industrial Data Acquisition Module
The PIC18F6628T-I/PT fits DIN-rail data acquisition modules requiring 8-12 analog inputs with RS-485/Ethernet uplinks. Its 10-bit ADC at 40 MHz provides 30 ksps throughput per channel for vibration or strain-gauge sampling. The MSSP interfaces to external 16-bit ADC or sigma-delta converters via SPI for higher-resolution channels. 96 KB Flash stores Modbus/TCP firmware and calibration tables; 4 KB SRAM double-buffers samples. Two USART channels enable daisy-chained RS-485 networks. The industrial temperature rating suits unheated control cabinets.
Empfohlen
Medical Device Control (Non-Critical)
The PIC18F6628T-I/PT suits non-life-critical medical peripherals such as laboratory analyzers, infusion pump controllers, and patient monitor sub-systems. Its 96 KB Flash holds FDA-traceable firmware with version metadata; 1 KB EEPROM stores device calibration and audit trail data. The 12-channel ADC reads pressure transducers and thermistor arrays; the 16-bit timer generates precise dosing PWM. The 5 V tolerance and industrial temperature grade suit clinical environments. Note: do not use in life-support or implantable devices without additional qualification.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC18F6628T-I/PT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC18F6628-I/PT | PIC18F6628-E/PT | PIC18F6627-I/PT | PIC18F6622-E/PT |
|---|---|---|---|---|---|
| Package | 64-pin TQFP (PT) 10x10 mm | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 96 KB | 96 KB | 96 KB | 70 KB (-27%) | 64 KB (-33%) |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Data EEPROM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Clock Speed | 40 MHz / 10 MIPS | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V | 4.2 V to 5.5 V |
| Temperature Range | -40C to +85C (Industrial) | -40C to +85C | -40C to +125C (Extended) | -40C to +85C | -40C to +125C (Extended) |
| I/O Pins | 54 | 54 | 54 | 54 | 54 |
| Packaging Form | Tape & Reel | Tray | Tray | Tray | Tray |
Wichtigste Unterscheidungsmerkmale
- Highest Flash density in the PIC18F662x TQFP-64 family (vs. PIC18F6622-E/PT)
- Industrial-grade temperature with tape-and-reel packaging (vs. PIC18F6628-I/PT)
- Mature PIC18F enhanced architecture with 16-bit instructions (vs. PIC18F67J11-I/PT (3.3 V variant))
Designhinweise
Place 100 nF ceramic decoupling capacitors within 5 mm of every VDD/VSS pin pair, plus a single 10 uF bulk tantalum or ceramic capacitor at the MCU's main supply entry. The PIC18F6628T-I/PT has multiple VDD/VSS pairs (pins 11/12, 29/30, 46/47) that must each be decoupled; sharing one cap across multiple pairs risks ground bounce during CCP PWM transitions.
Configure MCLR (pin 1) with a 10 kohm pull-up to VDD and a 100 nF cap to ground for proper reset. Floating MCLR causes intermittent brown-out resets under EMI. Also: when using the parallel slave port, PORTE pins RE0/RE1/RE2 (pins 8-10) must be configured as digital outputs and PORTD as inputs/PSP mode; an unconfigured PSP can lock the bus.
Route the crystal traces between OSC1 (pin 13) and OSC2 (pin 14) with short, symmetric traces and a ground guard ring; keep them away from high-current PWM traces (CCP1, CCP2) to avoid injection of switching noise into the oscillator. For 40 MHz operation with a 10 MHz crystal, the internal 4x PLL is enabled in CONFIG1H and the 10 MHz must have 20 ppm accuracy or better.
When using the ADC, connect AVSS (pin 60) and AVDD (pin 61) to a clean analog supply; isolate from digital VDD with a ferrite bead, and configure ANSEL registers to disable digital input buffers on analog pins. Failing to disable digital inputs allows digital switching noise to couple into the ADC sample-and-hold capacitor, degrading 10-bit ADC accuracy to 8-bit effective resolution.
Compliance-Informationen
RoHS compliant Pb-free TQFP package per Microchip product page. Not AEC-Q100 qualified; choose automotive-grade PIC18F K-series parts for vehicle applications.
