PIC18LF24K22-I/MV - 8-bit XLP MCU 16KB Flash 28-UQFN | Microchip
Teilenummer: PIC18LF24K22-I/MV ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.2 | $3,20 |
| 10 | $2.88 | $28,80 |
| 100 | $2.41 | $241,00 |
| 500 | $2.15 | $1.075,00 |
| 1.000 | $1.9 | $1.900,00 |
PIC18LF24K22-I/MV Übersicht
A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (Flash), data memory (RAM), and programmable peripherals. The PIC18 family sits in Microchip's 8-bit hierarchy: PIC10/12/16/18 -> 8-bit MCU -> microcontroller -> embedded computing IC -> semiconductor. The 'LF' subfamily specifically targets ultra-low-power applications through nanoWatt XLP technology, enabling sleep currents in the nanoamp range.
Key features include 16KB Flash self-programmable memory, 256 bytes of EEPROM, 10-bit ADC up to 17 channels, multiple PWM modules, EUSART, MSSP (SPI/I2C), and ultra-low-power sleep modes. The integrated 16MHz internal oscillator eliminates external crystals in many designs, while the 28-pin UQFN package provides compact 4x4 mm footprint with exposed thermal pad suitable for space-constrained applications. CIP (Core Independent Peripherals) reduce CPU overhead by handling tasks autonomously in hardware.
The PIC18LF24K22 architecture uses an enhanced Harvard RISC core with 49 instructions and hardware multiplier, executing most instructions in a single cycle for predictable deterministic performance. CIP features like CLC, PPS, and NCO enable complex signal routing without CPU intervention, making it suitable for real-time sensor processing and motor control loops.
Typical applications include low-power IoT sensor nodes, battery-powered medical devices, industrial control modules, consumer electronics HMI, USB peripherals, and automotive body electronics. The wide peripheral set and low-power modes also suit remote controls, smart metering, and wearable health monitoring. The industrial -40C to +85C temperature range supports harsh environment deployment.
When designing with this device, configure the PPS (Peripheral Pin Select) module early to avoid pin conflicts. Use the internal 16MHz HFINTOSC to save BOM cost and board space, but verify timing margins against your application. Review the PIC18(L)F24K22 datasheet for current consumption tables under different clock and sleep configurations before finalizing power budgets.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. The 28-UQFN (4x4) footprint is shared with the standard PIC18F24K22-I/MV and the tape-and-reel variant PIC18LF24K22T-I/MV, enabling layout reuse across the LF/F families.
Drop-in-Alternativen für PIC18LF24K22-I/MV – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC18LF24K22-I/MV (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Timers, Core Architecture, ADC.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC18F24K22-I/MV
✅ Drop-In✓ Auf Lager
$2.18 / Stück
Datenblatt ansehen →PIC18LF24K22T-I/MV
✅ Drop-In✓ Auf Lager
$1.92 / Stück
Datenblatt ansehen →PIC18LF24K22-I/SSVAO
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC18LF24K22-I/MV Grenzwerte & elektrische Eigenschaften
| Core Architecture | PIC18 8-bit RISC |
| CPU Speed | 64MHz max (16 MIPS) |
| Program Memory (Flash) | 16KB (8K x 16) |
| RAM | 768 bytes |
| EEPROM | 256 bytes |
| Operating Voltage Range | 1.8V to 3.6V |
| I/O Pins | 24 |
| ADC | 10-bit, up to 17 channels |
| PWM Modules | Multiple (CCP/ECCP) |
| Communication | EUSART, MSSP (SPI/I2C) |
| Low-Power Technology | nanoWatt XLP |
| Gehäuse | 28-pin UQFN (4x4 mm) with EP |
| Betriebstemperatur | -40C to +85C (Industrial) |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
PIC18LF24K22-I/MV Pin-Konfiguration
| Pin 1 | RA0/AN0/C1IN+/C2IN+/RP0 — Digital I/O / Analog input / Comparator input / Remappable peripheral |
| Pin 2 | RA1/AN1/C1IN-/C2IN-/RP1 — Digital I/O / Analog input / Comparator input / Remappable |
| Pin 3 | RA2/AN2/VREF-/C2IN+/RP2 — Digital I/O / Analog input / Voltage reference / Remappable |
| Pin 4 | RA3/AN3/VREF+/RP3 — Digital I/O / Analog input / Voltage reference+ / Remappable |
| Pin 5 | RA4/T0CKI/C1OUT/RP4 — Digital I/O / Timer0 clock / Comparator output / Remappable |
| Pin 6 | RA5/AN4/C2IN-/SS1/RP5 — Digital I/O / Analog input / SPI slave select |
| Pin 7 | RA6/OSC2/CLKO — Digital I/O / Oscillator output |
| Pin 8 | VSS — Ground |
| Pin 9 | RA7/OSC1/CLKI — Digital I/O / Oscillator input / Clock input |
| Pin 10 | RC0/SOSCO/T1CKI — Digital I/O / Secondary oscillator / Timer1 clock |
| Pin 11 | RC1/SOSCI/CCP2 — Digital I/O / Secondary oscillator / CCP2 PWM |
| Pin 12 | RC2/AN14/CCP1 — Digital I/O / Analog input / CCP1 PWM |
| Pin 13 | RC3/AN15/SEG15 — Digital I/O / Analog input / LCD segment |
| Pin 14 | RC4/AN16/SDA1 — Digital I/O / Analog input / I2C data |
| Pin 15 | RC5/AN17/SCL1 — Digital I/O / Analog input / I2C clock |
| Pin 16 | RC6/AN18/TX1/CK1 — Digital I/O / Analog input / EUSART TX |
| Pin 17 | RC7/AN19/RX1/DT1 — Digital I/O / Analog input / EUSART RX |
| Pin 18 | RB0/AN12/INT0/RP8 — Digital I/O / Analog input / External interrupt |
| Pin 19 | RB1/AN10/RP9 — Digital I/O / Analog input / Remappable |
| Pin 20 | RB2/AN8/RP10 — Digital I/O / Analog input / Remappable |
| Pin 21 | RB3/AN9/CPP1/RP11 — Digital I/O / Analog input / Remappable |
| Pin 22 | RB4/AN11/RP12 — Digital I/O / Analog input / Remappable |
| Pin 23 | RB5/AN13/RP13 — Digital I/O / Analog input / Remappable |
| Pin 24 | RB6/PGC — Digital I/O / ICSP clock |
| Pin 25 | RB7/PGD — Digital I/O / ICSP data |
| Pin 26 | VDD — Positive supply |
| Pin 27 | RE3/MCLR/VPP — Master clear reset / Programming voltage |
| Pin 28 | RA5/AN4 — Digital I/O / Analog input (alternate pin) |
Typische Anwendungen
PIC18LF24K22-I/MV ist geeignet für 6 Anwendungs: Low-Power IoT Sensor Nodes, Battery-Powered Medical Devices, Industrial Control Modules, Consumer Electronics HMI, Automotive Body Electronics, Smart Metering and Utility Monitoring.
Low-Power IoT Sensor Nodes
The PIC18LF24K22-I/MV fits low-power IoT sensor nodes because its nanoWatt XLP sleep current is below 100 nA, allowing battery life of multiple years. Per Microchip datasheet, the 64MHz core wakes quickly from sleep and executes sensor acquisition in microseconds, while the 10-bit ADC up to 17 channels handles multiple analog sensors without external multiplexing.
Empfohlen
Battery-Powered Medical Devices
The PIC18LF24K22-I/MV suits battery-powered medical devices needing long runtime and deterministic performance. Per Microchip datasheet, the 1.8V-3.6V supply range supports two alkaline or one lithium cell directly, while XLP sleep modes reduce quiescent drain to nanoamps between measurement cycles. The 16KB Flash handles application logic with room for bootloader updates.
Empfohlen
Industrial Control Modules
The PIC18LF24K22-I/MV serves industrial control modules where its -40C to +85C industrial temperature range and 24 I/O pins provide robust interfacing. Per Microchip datasheet, the CIP peripherals (CLC, NCO, PPS) handle signal routing in hardware without CPU load, while EUSART and MSSP support industrial protocols like Modbus RTU and I2C sensor chains.
Empfohlen
Consumer Electronics HMI
The PIC18LF24K22-I/MV is well-suited for consumer HMI applications such as small appliances, remote controls, and user-interface panels. Per Microchip datasheet, the PWM modules drive LEDs and buzzers directly, the 10-bit ADC reads potentiometers and touch sliders, and the 28-UQFN 4x4 mm footprint fits inside compact enclosures while leaving room for a small PCB antenna.
Empfohlen
Automotive Body Electronics
The PIC18LF24K22-I/MV can be used for non-safety automotive body electronics such as interior lighting controllers, seat control modules, and ambient sensor interfaces. Per Microchip datasheet, the EUSART and MSSP peripherals handle LIN and CAN transceivers, while the 64MHz core executes body-control algorithms with deterministic timing. For AEC-Q100 qualification, consider the PIC18LF24K22-I/SSVAO variant.
Empfohlen
Smart Metering and Utility Monitoring
The PIC18LF24K22-I/MV supports smart metering endpoints where its XLP nanoWatt sleep modes extend battery life to 10+ years. Per Microchip datasheet, the 17 ADC channels read multiple utility sensors (flow, temperature, leak detection), while the hardware multiplier accelerates metering calculations. The 1.8V minimum supply supports single-cell lithium thionyl chloride chemistries common in metering.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC18LF24K22-I/MV – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC18F24K22-I/MV | PIC18LF24K22T-I/MV | PIC18LF24K22-I/SSVAO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-UQFN (4x4) | 28-UQFN (4x4) - same | 28-UQFN (4x4) - same | 28-SSOP - different |
| Operating Voltage | 1.8V to 3.6V | 2.3V to 5.5V | 1.8V to 3.6V | 1.8V to 3.6V |
| Flash Memory | 16KB | 16KB | 16KB | 16KB |
| RAM | 768 bytes | 768 bytes | 768 bytes | 768 bytes |
| CPU Speed | 64MHz (16 MIPS) | 64MHz (16 MIPS) | 64MHz (16 MIPS) | 64MHz (16 MIPS) |
| Packaging | Tube | Tube | Tape & Reel | Tube (automotive) |
| Automotive Grade | No | No | No | Yes (AEC-Q100) |
Wichtigste Unterscheidungsmerkmale
- Lowest voltage range in K22 family (vs. PIC18F24K22-I/MV)
- Tube packaging format (vs. PIC18LF24K22T-I/MV)
- 28-UQFN 4x4 mm footprint saves PCB area (vs. PIC18LF24K22-I/SSVAO)
Designhinweise
Estimated: at 3.3V VDD with CPU active at 64MHz, core current is approximately 8-12 mA per Microchip datasheet typical curves; at 16MHz HFINTOSC this drops to ~2 mA. Sleep current with RTC enabled is ~1 uA, and deep sleep (all off) is below 100 nA. Use the internal HFINTOSC and disable unused peripherals in firmware to maximize battery life.
The 28-UQFN package has an exposed thermal pad that must be soldered to a copper pad on the PCB for thermal and mechanical reliability. Per Microchip package specification, the EP pad should connect to a ground plane with at least 4 thermal vias (0.3 mm diameter) for heat dissipation. Place decoupling 100nF + 10uF capacitors as close as possible to VDD pin 26 and VSS pin 8.
Configure PPS (Peripheral Pin Select) early in firmware to avoid pin conflicts: many peripherals are remappable to multiple pins. Per datasheet, the RPx pins must be unlocked via IOLOCK before reconfiguration, and unlocking requires a specific unlock sequence in software. Failure to do so leaves peripherals on default pins and wastes board space.
For high-speed SPI/I2C communication beyond 1 MHz, place 4.7k-10k pull-ups on I2C lines and use series resistors (22-33 ohm) on SPI clock/data traces. Per Microchip MSSP section, MSSP timing margins shrink above 8 MHz; verify signal integrity with an oscilloscope and respect the 4x VDD trace width rule.
Compliance-Informationen
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified; choose PIC18LF24K22-I/SSVAO for automotive.
