PIC24FJ128GL405-I/M4 - 16-Bit 128KB Flash MCU w/ USB/LCD | Microchip
Teilenummer: PIC24FJ128GL405-I/M4 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $6.2 | $6,20 |
| 10 | $5.74 | $57,40 |
| 100 | $5.12 | $512,00 |
| 500 | $4.61 | $2.305,00 |
| 1.000 | $4.09 | $4.090,00 |
PIC24FJ128GL405-I/M4 Übersicht
What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals. PIC24F devices sit in Microchip's mid-range 16-bit MCU tier: 16-bit wide data path, modified Harvard architecture, deterministic interrupt latency, and excellent code density compared with 8-bit MCUs. Within that family, the 'GL4' sub-family is engineered for ultra-low-power and human-machine-interface (HMI) applications, providing extended sleep current as low as hundreds of nanoamperes with multiple low-power modes that preserve RAM and peripheral state.
Key features of this variant include 128 KB dual-partition Flash supporting real-time OTA updates and EEPROM Emulation (EER), 32 KB SRAM, 16 MIPS sustained throughput at 32 MHz, integrated full-speed USB 2.0 device/host/OTG controller, an integrated segmented LCD driver supporting hundreds of pixels, up to 38 I/O pins with mappable peripherals via PPS (Peripheral Pin Select), and CIP blocks including a 12-bit ADC, multiple UART/SPI/I²C interfaces, comparators, and configurable logic cells.
Typical applications for the PIC24FJ128GL405-I/M4 include battery-powered IoT sensor nodes with segment-LCD displays, USB-CDC tethered data loggers, portable medical monitors, industrial HMI panels, home automation gateways, and metering/utility front-ends. The device also targets firmware-upgradable field installations that require secure dual-bank OTA updates.
When designing with this MCU, plan the I/O map early because PPS allows nearly every digital peripheral to be routed to most pins, simplifying PCB layout. Place a 0.1 µF ceramic decoupling capacitor within 5 mm of every VDD/VSS pair, route the 32 kHz crystal traces symmetrically to the SOSC pins, and allocate one PGECx/PGEDx pair for the ICSP interface so firmware can be debugged and updated in-circuit.
Drop-in-Alternativen für PIC24FJ128GL405-I/M4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24FJ128GL405-I/M4 (gleiche Bauform und Footprint) – abweichend in Package, ADC, Core Architecture, Operating Temperature, USB.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC24FJ128GL405-E/M4
✅ Drop-In✓ Auf Lager
$2.78 / Stück
Datenblatt ansehen →PIC24FJ128GL406-I/M4
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC24FJ64GL405-I/M4
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC24FJ128GL305-I/M4
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$1.94 / Stück
Datenblatt ansehen →PIC24FJ128GU405-I/M4
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$1.61 / Stück
Datenblatt ansehen →PIC24FJ128GL405-I/M4 Grenzwerte & elektrische Eigenschaften
| Architecture | 16-bit PIC® 24F (modified Harvard) |
| Core | MIPS 32 MHz (16 MIPS) |
| Program Flash | 128 KB dual-partition ECC Flash |
| SRAM | 32 KB |
| EEPROM Emulation | Yes (via EER Flash partition) |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Betriebstemperatur | -40 °C to +85 °C (Industrial, I suffix) |
| Gehäuse | 48-pin UQFN (6x6 mm), M4 designator |
| Montageart | Surface Mount |
| USB | USB 2.0 full-speed device/host/OTG |
| LCD Driver | Integrated segmented LCD controller |
| ADC | 10-/12-bit ADC (analog-to-digital converter, count from snippet) |
| I/O Pins | Up to 38 GPIOs with PPS |
| Peripheral Pin Select (PPS) | Yes - remappable digital peripherals |
| Low-Power Modes | Sleep/Idle/Deep Sleep/DOZE |
| ICSP Debug | Multiple PGECx/PGEDx pairs |
| RoHS-Status | Compliant |
PIC24FJ128GL405-I/M4 Pin-Konfiguration
| Pin 1 | VDD — Positive supply voltage (2.0 V to 3.6 V) |
| Pin 2 | RA0 — Port A bit 0 / analog input |
| Pin 3 | RA1 — Port A bit 1 / analog input |
| Pin 4 | RA2 — Port A bit 2 / analog input |
| Pin 5 | RA3 — Port A bit 3 / analog input |
| Pin 6 | VSS — Digital ground |
| Pin 7 | RA4 — Port A bit 4 / analog input |
| Pin 8 | RA5 — Port A bit 5 / analog input |
| Pin 9 | RA6 — Port A bit 6 / analog input |
| Pin 10 | RA7 — Port A bit 7 / analog input |
| Pin 11 | RB0 — Port B bit 0 / PPS-remappable |
| Pin 12 | RB1 — Port B bit 1 / PPS-remappable |
| Pin 13 | RB2 — Port B bit 2 / PPS-remappable |
| Pin 14 | RB3 — Port B bit 3 / PPS-remappable |
| Pin 15 | RB4 — Port B bit 4 / PPS-remappable |
| Pin 16 | RB5 — Port B bit 5 / PPS-remappable |
| Pin 17 | RB6 — Port B bit 6 / ICSP PGEC2 |
| Pin 18 | RB7 — Port B bit 7 / ICSP PGED2 |
| Pin 19 | RC0 — Port C bit 0 / PPS-remappable |
| Pin 20 | RC1 — Port C bit 1 / PPS-remappable |
| Pin 21 | RC2 — Port C bit 2 / PPS-remappable |
| Pin 22 | RC3 — Port C bit 3 / PPS-remappable |
| Pin 24 | RC4 — Port C bit 4 / USB D- (USBID) |
| Pin 25 | RC5 — Port C bit 5 / USB D+ |
| Pin 26 | RC6 — Port C bit 6 / PPS-remappable |
| Pin 27 | RC7 — Port C bit 7 / PPS-remappable |
| Pin 28 | RD0 — Port D bit 0 / LCD segment |
| Pin 29 | RD1 — Port D bit 1 / LCD segment |
| Pin 30 | RD2 — Port D bit 2 / LCD segment |
| Pin 31 | RD3 — Port D bit 3 / LCD segment |
| Pin 32 | RD4 — Port D bit 4 / LCD segment |
| Pin 33 | RD5 — Port D bit 5 / LCD segment |
| Pin 34 | RD6 — Port D bit 6 / LCD segment |
| Pin 35 | RD7 — Port D bit 7 / LCD segment |
| Pin 36 | RE0 — Port E bit 0 / LCD segment |
| Pin 37 | RE1 — Port E bit 1 / LCD segment |
| Pin 38 | RE2 — Port E bit 2 / LCD segment |
| Pin 39 | RE3 — Port E bit 3 / LCD segment |
| Pin 40 | RE4 — Port E bit 4 / LCD segment |
| Pin 41 | RE5 — Port E bit 5 / LCD segment |
| Pin 42 | RE6 — Port E bit 6 / LCD segment |
| Pin 43 | RE7 — Port E bit 7 / LCD segment |
| Pin 44 | SOSCO — Secondary oscillator output (32.768 kHz) |
| Pin 45 | SOSCI — Secondary oscillator input (32.768 kHz) |
| Pin 46 | VUSB — USB 3.3 V regulator input/output |
| Pin 47 | MCLR — Master clear (active-low reset) |
| Pin 48 | VSS — Digital ground (additional) |
| Pin 23 | AVSS — Analog ground |
Typische Anwendungen
PIC24FJ128GL405-I/M4 ist geeignet für 6 Anwendungs: Battery-Powered IoT Sensor Node with Segment LCD, USB-CDC Tethered Data Logger, Portable Medical Monitor, Industrial HMI Panel with LCD, Smart Home / Building Automation Gateway, Utility Metering / Energy Display.
Battery-Powered IoT Sensor Node with Segment LCD
The PIC24FJ128GL405-I/M4 is well suited to battery-powered IoT sensor nodes that include a segmented LCD display. Its 32 KB SRAM can hold a refresh buffer for hundreds of LCD segments, while 128 KB dual-partition Flash enables secure Over-The-Air firmware updates without bricking the node. Deep-sleep currents in the nanoampere range, combined with the on-chip 10-/12-bit ADC and multiple UART/SPI/I²C interfaces, let the MCU wake on sensor interrupts, sample, refresh the LCD, and return to sleep - extending coin-cell runtime into years. The integrated USB also enables tethered firmware recovery during manufacturing or field servicing.
Empfohlen
USB-CDC Tethered Data Logger
The integrated full-speed USB 2.0 controller makes the PIC24FJ128GL405-I/M4 ideal for USB-CDC tethered data loggers that stream sensor data to a host PC. With 32 KB SRAM to buffer high-rate ADC samples and 128 KB ECC Flash for local storage, the part can sustain multi-kilosample-per-second logging without host intervention. The on-chip USB transceiver eliminates external PHY components, and the VUSB regulator simplifies 5 V bus-powered designs. Combined with low sleep current between log bursts, the GL405 reduces average power and removes the BOM cost of a dedicated USB interface IC.
Empfohlen
Portable Medical Monitor
For portable medical monitors - such as pulse oximeters, blood-pressure cuffs, and handheld glucose meters - the PIC24FJ128GL405-I/M4 offers the right combination of low power, integrated LCD driving, and deterministic interrupt response. The 16 MIPS CPU sustains real-time signal processing for biosensors while the segmented LCD controller drives the human-machine interface. Industrial temperature grade and 2.0 V to 3.6 V operation enable single-AA or single-coin-cell designs. ECC Flash protects patient data from bit-flip corruption, supporting IEC 60571-style reliability targets for medical firmware.
Empfohlen
Industrial HMI Panel with LCD
The PIC24FJ128GL405-I/M4 fits industrial HMI panels that display process variables on segmented LCDs and report to a central PLC. Multiple UART/SPI/I²C interfaces handle communication with sensor front-ends, while the on-chip ADC reads analog process signals. CIP blocks such as comparators and configurable logic cells can replace discrete glue logic, reducing PCB area and BOM cost. The dual-partition Flash enables safe field firmware updates, so panel firmware can be upgraded without taking the production line offline.
Empfohlen
Smart Home / Building Automation Gateway
In a smart-home gateway, the PIC24FJ128GL405-I/M4 can act as a Zigbee/MQTT/Thread edge node that aggregates sensor data and forwards it to the cloud. Its 32 MHz MIPS core handles protocol stacks, while the integrated USB provides a debugging/wan tether. CIP peripherals like the configurable logic cell allow hardware-accelerated event detection (e.g., motion-trigger wake) without waking the CPU. Low deep-sleep current keeps standby power below energy-star targets for always-on devices, and dual-bank OTA allows security patches to be applied without service interruption.
Empfohlen
Utility Metering / Energy Display
The PIC24FJ128GL405-I/M4 is ideal for electricity/water/gas metering front-ends that display consumption on a segmented LCD and occasionally transmit readings via USB or RF. ECC Flash protects billing data integrity, and the segmented LCD driver removes the need for an external display controller. The wide operating temperature range with the 'I' industrial grade supports outdoor cabinet installations. Dual-partition OTA updates let utilities deploy tariff changes or security patches without sending a technician to the meter.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC24FJ128GL405-I/M4 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC24FJ128GL405-E/M4 | PIC24FJ128GL406-I/M4 | PIC24FJ64GL405-I/M4 | PIC24FJ128GL305-I/M4 | PIC24FJ128GU405-I/M4 |
|---|---|---|---|---|---|---|
| Package | 48-pin UQFN (6x6 mm) | 48-pin UQFN (6x6 mm) - same | 48-pin UQFN (6x6 mm) - same | 48-pin UQFN (6x6 mm) - same | 48-pin UQFN (6x6 mm) - same | 48-pin UQFN (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 128 KB dual-partition ECC | 128 KB dual-partition ECC | 128 KB dual-partition ECC | 64 KB dual-partition ECC | 128 KB dual-partition ECC | 128 KB dual-partition ECC |
| SRAM | 32 KB | 32 KB | 32 KB | 16 KB | 32 KB | 32 KB |
| USB 2.0 Full-Speed | Yes (device/host/OTG) | Yes | Yes | Yes | No (no USB) | Yes |
| Temperature Range | -40 °C to +85 °C (Industrial) | -40 °C to +125 °C (Extended) | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Core Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| LCD Driver | Integrated segmented LCD | Integrated segmented LCD | Integrated segmented LCD | Integrated segmented LCD | Integrated segmented LCD | Integrated segmented LCD |
Wichtigste Unterscheidungsmerkmale
- Dual-partition Flash with ECC for live OTA updates (vs. PIC24FJ64GL405-I/M4)
- Integrated full-speed USB 2.0 controller with OTG (vs. PIC24FJ128GL305-I/M4)
- Industrial temperature grade (-40 °C to +85 °C) baseline (vs. PIC24FJ128GL405-E/M4)
Designhinweise
Decoupling: Place a 0.1 µF ceramic capacitor within 5 mm of every VDD/VSS pair on the PIC24FJ128GL405-I/M4. Add a single 10 µF bulk capacitor near the IC. For USB applications, also decouple VUSB with 0.1 µF + 4.7 µF to handle USB inrush transients. The internal 1.8 V core regulator requires its own 1 µF + 0.1 µF capacitor on VCAP. Estimated: total BOM cost for decoupling is approximately $0.10 in low-volume builds.
Crystal layout: Route the SOSCO/SOSCI 32.768 kHz crystal traces symmetrically with ground guard rings to minimize pickup noise. Keep crystal traces under 5 mm, and place load capacitors within 2 mm of the pins. Estimated: a poor layout can shift the RTC by several seconds per day. For the main 32 MHz oscillator, follow the same guard-ring pattern and use a 4-layer PCB if possible.
ICSP programming: The PIC24FJ128GL405-I/M4 has multiple PGECx/PGEDx pairs - any pair can be used for In-Circuit Serial Programming, but the pair must be matched (e.g., PGEC2 with PGED2). All VSS pins must be connected to ground for reliable programming. Estimated: ignoring this requirement causes ICSP failure even on otherwise-correct designs. Always reserve at least one PGECx/PGEDx pair on a programming header for field firmware updates.
Compliance-Informationen
RoHS and REACH compliance per Microchip product page. Not AEC-Q100 qualified - automotive applications should evaluate the AEC-Q100-grade PIC24FJ GL4 variants separately.
