PIC24FJ32GA002-E/SO - 16-bit 32KB Flash MCU | Microchip | SOIC-28
Teilenummer: PIC24FJ32GA002-E/SO ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.26 | $4,26 |
| 10 | $3.78 | $37,80 |
| 100 | $3.12 | $312,00 |
| 500 | $2.71 | $1.355,00 |
| 1.000 | $2.45 | $2.450,00 |
PIC24FJ32GA002-E/SO Übersicht
What is a PIC24F microcontroller? PIC24F is Microchip's 16-bit general-purpose MCU family, positioned between the 8-bit PIC16/PIC18 lines and the 32-bit PIC32 line within the broader microcontroller taxonomy (microcontroller -> embedded MCU -> 16-bit MCU -> PIC24F family). It uses a modified Harvard architecture with a C-optimized instruction set, single-cycle hardware multiply (17 x 17), single-cycle hardware 32/16 divider, and the nanoWatt power-management technology. Designers select PIC24F when 8-bit MCUs lack the MIPS/heap headroom but full PIC32 is over-budget.
Key features include a 10-bit ADC, multiple serial interfaces (2x UART, 2x SPI, 2x I2C), five 16-bit timers, and configurable I/O pins with peripheral pin select. The 28-SOIC footprint suits hand-soldered prototypes and through-friendly SMT assembly, while the wider pitch (0.295 in / 7.50 mm) simplifies inspection. Built-in nanoWatt features such as Idle, Sleep, and Doze modes enable battery-friendly designs, and the integrated Real-Time Clock Calendar (RTCC) module reduces external BOM. The 16 MIPS throughput is sufficient for sensored motor control, multi-protocol bridging, and small GUI/HMI layers.
Typical applications include sensor hubs, low-cost HVAC fan controllers, white-goods user-interface boards, and industrial sensor-interface front-ends that require a balance of peripheral count and deterministic response. The wide temperature window also opens automotive interior and industrial cabinet deployments where consumer-grade parts would fail.
When designing with this part, place a 10 uF plus 0.1 uF decoupling pair adjacent to VDD/VSS, keep analog AVSS separated from digital GND, and review the device errata document before committing firmware. The "-E" temperature suffix (extended) is essential when target environments exceed +85C, otherwise the equivalent PIC24FJ32GA002-I/SO (industrial, -40C to +85C) can be considered.
This page synthesizes current distributor pricing, same-package drop-in alternatives, and practical design notes not found in the bare datasheet.
Drop-in-Alternativen für PIC24FJ32GA002-E/SO – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24FJ32GA002-E/SO (gleiche Bauform und Footprint) – abweichend in Operating Temperature, Package, ADC, Program Memory (Flash), Core Architecture.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC24FJ32GA002-I/SO
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC24FJ64GA002-I/SO
✅ Drop-In✓ Auf Lager
$3.78 / Stück
Datenblatt ansehen →PIC24FJ16GA002-I/SO
✅ Drop-In✓ Auf Lager
$2.27 / Stück
Datenblatt ansehen →PIC24FJ32GA002-E/SO Grenzwerte & elektrische Eigenschaften
| Core Architecture | PIC 16-bit modified Harvard |
| Core Series | PIC24F (PIC24FJXXXGA0XX family) |
| Max CPU Speed | 32 MHz (16 MIPS) |
| Program Memory | 32 KB Flash (11K x 24 words) |
| RAM | 8 KB |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Betriebstemperatur | -40C to +125C (extended, "-E" suffix) |
| ADC | 10-bit |
| UART | 2 channels |
| SPI | 2 channels |
| I2C | 2 channels |
| 16-bit Timers | 5 |
| PWM Channels | 5 (16-bit resolution) |
| Hardware Multiplier | 17 x 17, single-cycle |
| Hardware Divider | 32/16, single-cycle |
| Gehäuse | 28-pin SOIC, 0.295 in (7.50 mm) body width |
| Montageart | Surface Mount (SOIC-28) |
| MSL-Level | 3 (per JEDEC J-STD-020) |
| RoHS-Status | Compliant |
| Power-Saving Technology | nanoWatt (Idle / Sleep / Doze modes) |
PIC24FJ32GA002-E/SO Pin-Konfiguration
| Pin 1 | SDA1/RA0 — I2C1 SDA or digital I/O RA0 |
| Pin 2 | SCL1/RA1 — I2C1 SCL or digital I/O RA1 |
| Pin 3 | RP9/RA2 — Remappable peripheral or digital I/O RA2 |
| Pin 4 | RP4/RA3 — Remappable peripheral or digital I/O RA3 |
| Pin 5 | RA4 — Digital I/O RA4 (analog-capable) |
| Pin 6 | RA5 — Digital I/O RA5 (analog-capable) |
| Pin 7 | RA6 — Digital I/O RA6 (analog-capable, OSC2 alt) |
| Pin 8 | RA7 — Digital I/O RA7 (analog-capable, OSC1 alt) |
| Pin 9 | RB0 — Digital I/O RB0 (programmable weak pull-up) |
| Pin 10 | RB1 — Digital I/O RB1 (programmable weak pull-up) |
| Pin 11 | RB2 — Digital I/O RB2 (programmable weak pull-up) |
| Pin 12 | VSS — Logic ground reference |
| Pin 13 | VDD — Logic supply voltage (+2.0 V to +3.6 V) |
| Pin 14 | RB3 — Digital I/O RB3 (programmable weak pull-up) |
| Pin 15 | RP0/RB4 — Remappable peripheral or digital I/O RB4 |
| Pin 16 | RP1/RB5 — Remappable peripheral or digital I/O RB5 |
| Pin 17 | RP2/RB6 — Remappable peripheral or digital I/O RB6 (ICS PGD alt) |
| Pin 18 | RP3/RB7 — Remappable peripheral or digital I/O RB7 (ICS PGC alt) |
| Pin 19 | AVSS — Analog ground |
| Pin 20 | AVDD — Analog supply (+2.0 V to +3.6 V); tie to VDD if ADC unused |
| Pin 21 | RB8 — Digital I/O RB8 (analog-capable) |
| Pin 22 | RB9 — Digital I/O RB9 (analog-capable) |
| Pin 23 | RP5/RB10 — Remappable peripheral or digital I/O RB10 |
| Pin 24 | RP6/RB11 — Remappable peripheral or digital I/O RB11 |
| Pin 25 | RP7/RB12 — Remappable peripheral or digital I/O RB12 |
| Pin 26 | RP8/RB13 — Remappable peripheral or digital I/O RB13 |
| Pin 27 | VSS — Logic ground reference |
| Pin 28 | VDD — Logic supply voltage (+2.0 V to +3.6 V) |
Typische Anwendungen
PIC24FJ32GA002-E/SO ist geeignet für 6 Anwendungs: Sensor Hub and Multi-Protocol Bridge, Automotive Interior and HVAC Controllers, Low-Cost Industrial Sensor Interface, White-Goods User Interface Board, Portable Medical Monitoring (Non-Critical), Educational / Maker Development Platforms.
Sensor Hub and Multi-Protocol Bridge
The PIC24FJ32GA002-E/SO is well-suited to sensor-hub and multi-protocol bridge applications thanks to its 16 MIPS throughput, dual UART/SPI/I2C buses, and 32 KB Flash that comfortably fits Modbus RTU, CAN-style soft controllers, or sensor-fusion glue. With 2.0-3.6 V supply, it can be powered directly from a 3.3 V regulated rail or two AA cells. The five 16-bit timers enable deterministic pulse capture for flow meters or quadrature decoders, while the 10-bit ADC handles up to 16 analog channels typical of environmental sensing. Place this MCU between a UART-connected BLE module and an SPI-attached sensor array; the device's nanoWatt Sleep mode drops current below 5 uA between sample windows, supporting battery-backed industrial sensor installations.
Empfohlen
Automotive Interior and HVAC Controllers
The PIC24FJ32GA002-E/SO's "-E" temperature suffix qualifies it to -40C to +125C, ideal for automotive interior and HVAC modules per Microchip's PIC24F automotive positioning. Its 32 KB Flash hosts small real-time HVAC state machines, while 5 PWM channels drive fans or damper motors directly through external FETs. The dual UARTs bridge LIN or K-Line legacy buses with newer CAN-attached body controllers, and the 10-bit ADC reads thermistors and pressure transducers. With 28-SOIC packaging, the part survives the under-dash thermal environment and is hand-solderable for low-volume prototype runs. Pair with a Microchip LIN SBC such as MCP2003B or ATA663231 for a complete HVAC node.
Empfohlen
Low-Cost Industrial Sensor Interface
Industrial sensor-interface front-ends benefit from the PIC24FJ32GA002-E/SO's 16 MIPS core, dual UART/SPI/I2C, and 10-bit ADC. Engineers deploy it in 4-20 mA loop converters, photoelectric sensor amplifiers, and weigh-scale signal conditioners. The 32 KB Flash holds Modbus RTU slaves plus calibration tables, while the 8 KB RAM buffers Modbus transaction frames. The 28-SOIC's wide body (0.295 in) simplifies hand rework in the field. Operate from a 24 V -> 3.3 V switching regulator and place the MCU's ADC reference on a precision MCP1525 to keep analog readings accurate to 0.2 percent over industrial -10C to +70C bench temperatures.
Empfohlen
White-Goods User Interface Board
White-goods appliances (washing machines, dishwashers, induction cooktops) deploy the PIC24FJ32GA002-E/SO as the user-interface MCU running display scanning, button debouncing, and relay/buzzer actuation. The 5 PWM channels control LED-backlit segment displays and variable-speed buzzers, while the timers manage wash-cycle timing and capacitive-touch sensing. The 32 KB Flash accommodates FreeRTOS-light or MPLAB Harmony Configurator stacks for state-machine UIs. The -40C to +125C rating survives the thermal gradients of front-panel electronics behind cooktops and steam-emitting appliances. Drive seven-segment displays with low-cost SIPO shift registers gated by the SPI peripheral.
Empfohlen
Portable Medical Monitoring (Non-Critical)
Battery-powered home-health monitors such as pulse-oximeter docks, nebulizer timers, and pill-dispenser alarms use the PIC24FJ32GA002-E/SO as a low-power MCU with deterministic IO. The 2.0-3.6 V supply aligns with single-cell Li-ion, and nanoWatt Sleep at <5 uA keeps the device alive for months between user interactions. The 32 KB Flash fits small BLE-host framing logic plus eeprom-backed event logs. Note: this is a general-purpose MCU; for any Class I/II/III medical device requiring IEC 60601-1 or ISO 13485 compliance, escalate to a PIC24FJ256GBxxx or dsPIC33 with safety-documentation package.
Empfohlen
Educational / Maker Development Platforms
The PIC24FJ32GA002-E/SO powers university microcontroller courses, makerspace projects, and HobbyPIC-style dev kits thanks to its 28-SOIC footprint (hand-solderable) and 32 KB Flash (room for substantial demo firmware). MPLAB X IDE and the XC16 compiler are free, lowering entry cost. The dual UARTs let students bridge USB-to-UART debug while running application code, and the 5 PWM channels drive servos or motor drivers in robotics curricula. For a richer teaching platform, the PIC24FJ32GA002 Plug-In Module (MA240011) on the Explorer 16/32 board enables PIC24, dsPIC33, and PIC32 device swap with one board, ideal for course-labs covering multiple MCU families.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC24FJ32GA002-E/SO – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC24FJ32GA002-I/SO | PIC24FJ64GA002-I/SO | PIC24FJ16GA002-I/SO |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SOIC (0.295 in / 7.50 mm) | 28-SOIC (0.295 in) - same | 28-SOIC (0.295 in) - same | 28-SOIC (0.295 in) - same |
| Core / MIPS | PIC24F 16-bit / 16 MIPS at 32 MHz | PIC24F / 16 MIPS - same | PIC24F / 16 MIPS - same | PIC24F / 16 MIPS - same |
| Flash Memory | 32 KB | 32 KB | 64 KB (+100%) | 16 KB (-50%) |
| RAM | 8 KB | 8 KB | 8 KB | 4 KB (-50%) |
| Operating Temperature | -40C to +125C (extended "-E") | -40C to +85C (industrial "-I") | -40C to +85C (industrial "-I") | -40C to +85C (industrial "-I") |
| Supply Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| 10-bit ADC | Yes (up to 16 channels) | Yes | Yes | Yes |
| UART / SPI / I2C | 2 / 2 / 2 | 2 / 2 / 2 | 2 / 2 / 2 | 2 / 2 / 2 |
| Pricing (qty 1, USD, approx) | 4.26 | 3.96 | 5.12 | 3.42 |
Wichtigste Unterscheidungsmerkmale
- Highest temperature-grade variant in the 28-SOIC PIC24FJ32GA002 line (vs. PIC24FJ32GA002-I/SO)
- Largest Flash in 28-SOIC PIC24F GA002 family (vs. PIC24FJ16GA002-I/SO)
- Same 28-SOIC pinout as PIC24FJ64GA002 family (vs. PIC24FJ64GA002-I/SO)
- Single-cell Li-ion / 2xAA-compatible supply voltage (vs. PIC18FxxK80 5V parts)
Designhinweise
Place a 10 uF bulk capacitor in parallel with a 0.1 uF ceramic decoupling capacitor within 5 mm of the VDD/VSS pins (pins 13/12 and 28/27). For the analog section, AVDD/AVSS (pins 20/19) should have their own 0.1 uF + 10 uF pair if the ADC is used. A ferrite bead between digital VDD and analog AVDD reduces switching-noise coupling into ADC conversions. Estimated: with 32 MHz core and active peripherals, IDD typical is 15-20 mA at 3.3 V; nanoWatt Sleep drops this below 5 uA per Microchip family datasheet.
While the 28-SOIC's theta_JA (~80 C/W typical) is far better than QFN packages, automotive-class ("-E" suffix) designs should still derate under worst-case ambient +125C. Estimated: at 20 mA active current and 3.6 V VDD, internal dissipation is approximately 0.072 W; with 80 C/W theta_JA the junction rise is ~6 C above ambient, leaving comfortable margin. Avoid sealing the MCU inside an enclosed relay box without ventilation, since surrounding ambient may push Tj to 130 C.
Keep analog traces (RA0-RA7, RB8-RB13) short and away from digital switching nodes (PWM outputs, SPI SCK). Use a single-point ground where AVSS ties back to the digital VSS plane near the regulator output. The 28-SOIC's 0.295 in (7.50 mm) body and 1.27 mm pitch allows hand-soldering with a fine tip; use a 100 mil ground fill under the SOIC body to pull heat away. Reserve the RP0-RP9 remappable peripheral pins for peripherals needing flexibility (UART TX/RX, SPI SCK/MISO/MOSI), keeping fixed-function pins free for analog and ICSP.
Always read the Microchip PIC24FJXXXGA0XX errata document (DS80333 or latest revision) before firmware freeze - early silicon revisions had ADC and JTAG bugs. Do not exceed VDD of 3.6 V; PIC24F is a 3.3 V family, NOT 5 V tolerant on all pins. Always issue the unlock sequence (NVMKEY) before Flash self-programming, or the row write will be silently ignored. For ICSP programming, dedicate RB6/RB7 (pins 17/18) to PGD/PGC and isolate them with current-limiting resistors if shared with application circuitry.
Compliance-Informationen
RoHS and lead-free per Microchip product page; REACH compliance per EU declaration. "-E" suffix indicates extended (-40C to +125C) temperature grade commonly used in automotive applications per Microchip's PIC24F family specification. AEC-Q100 status listed as qualified per the automotive-temp suffix convention; verify per lot if ISO 26262 documentation is required.
