PIC24FJ64GA306T-I/MR - 16-bit 32MHz 64KB Flash MCU 64-VQFN | Microchip
Teilenummer: PIC24FJ64GA306T-I/MR ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.85 | $3,85 |
| 10 | $3.55 | $35,50 |
| 100 | $3.18 | $318,00 |
| 500 | $2.85 | $1.425,00 |
| 1.000 | $2.55 | $2.550,00 |
PIC24FJ64GA306T-I/MR Übersicht
A 16-bit microcontroller is a single-chip computer that uses an internal data path 16 bits wide, enabling more efficient arithmetic on larger integers and richer peripheral addressing than 8-bit cores while retaining low power consumption. PIC24F microcontrollers sit within the broader hierarchy of microcontroller -> embedded controller -> semiconductor; the FJ sub-family adds nanoWatt XLP technology and integrated LCD driver support, positioning this device for low-power human-machine interface designs.
Key features include nanoWatt XLP technology with a Low Voltage Sleep current of approximately 340 nA that retains RAM and core state, a real-time clock and calendar (RTCC) module, a 10-bit ADC capable of up to 500 ksps, multiple UART/SPI/I2C peripherals, and a dedicated LCD segment driver interface. The CTMU charge-time measurement unit enables touch sensing and capacitance measurement, while a 16-bit parallel master port and EPMP support external bus expansion for graphics or memory.
Architecturally, the PIC24FJ64GA306T-I/MR pairs a wide 16-bit ALU with a 24-bit instruction word to balance code density and execution speed. The integrated voltage regulator supports operation down to 2.0V, and the peripheral pin select (PPS) feature allows digital peripheral I/O to be remapped to most general-purpose pins, simplifying PCB routing. Hardware crypto and unique MAC address support are absent on this part; cryptographic options are addressed by separate PIC24Fxx and dsPIC33 families.
Typical applications include battery-powered IoT sensor nodes, portable medical monitors, smart metering with LCD readouts, industrial HMI panels, USB peripherals using an external transceiver, and low-power remote controls. The wide operating temperature range of -40C to +85C makes the device suitable for industrial and outdoor installations.
When designing with this device, ensure that Vcap decoupling is provided per datasheet recommendations and that unused I/O pins are configured as outputs to minimize transient current. PPS configuration should be locked early in initialization to prevent bus contention during bootstrap.
This page synthesizes distributor pricing tiers, drop-in same-family alternatives, and practical low-power design notes that are not consolidated in the manufacturer datasheet, providing a faster engineering reference for embedded BOM and lifecycle decisions.
Drop-in-Alternativen für PIC24FJ64GA306T-I/MR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24FJ64GA306T-I/MR (gleiche Bauform und Footprint) – abweichend in ADC, Package, Program Memory (Flash), RoHS Status, Core Architecture.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC24FJ128GA306T-I/MR
✅ Drop-In✓ Auf Lager
$2.39 / Stück
Datenblatt ansehen →PIC24FJ128GL306T-I/MR
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$2.5 / Stück
Datenblatt ansehen →PIC24FJ64GA306-I/MR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC24FJ64GA306T-I/PT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC24FJ64GA306T-I/MR Grenzwerte & elektrische Eigenschaften
| Family | PIC24F XLP |
| Core Architecture | 16-bit modified Harvard |
| Program Memory (Flash) | 64 KB (22K x 24) |
| RAM Size | 8 KB (8K x 8) |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Operating Voltage (VDD) | 2.0 V to 3.6 V |
| I/O Pins | 85 |
| ADC | 10-bit |
| Gehäuse | 64-pin VQFN (9x9 mm) |
| Montageart | Surface Mount |
| Betriebstemperatur | -40C to +85C (Industrial) |
| Low Voltage Sleep Current | 340 nA typical |
| LCD Driver | Integrated segment driver |
| Peripheral Pin Select (PPS) | Yes |
| RoHS-Status | Compliant |
| Communication Peripherals | UART, SPI, I2C |
PIC24FJ64GA306T-I/MR Pin-Konfiguration
| Pin 1 | RP15/RB15 — Remappable I/O / Port B |
| Pin 2 | RP14/RB14 — Remappable I/O / Port B |
| Pin 3 | RP13/RB13 — Remappable I/O / Port B |
| Pin 4 | RP12/RB12 — Remappable I/O / Port B |
| Pin 5 | RP11/RB11 — Remappable I/O / Port B |
| Pin 6 | RP10/RB10 — Remappable I/O / Port B |
| Pin 7 | RP9/RB9 — Remappable I/O / Port B |
| Pin 8 | RP8/RB8 — Remappable I/O / Port B |
| Pin 9 | RP7/RB7 — Remappable I/O / Port B |
| Pin 10 | RP6/RB6 — Remappable I/O / Port B / ICSPCLK |
| Pin 11 | RP5/RB5 — Remappable I/O / Port B / ICSPDAT |
| Pin 12 | RP4/RB4 — Remappable I/O / Port B |
| Pin 13 | RP3/RB3 — Remappable I/O / Port B |
| Pin 14 | RP2/RB2 — Remappable I/O / Port B |
| Pin 15 | RP1/RB1 — Remappable I/O / Port B |
| Pin 16 | RP0/RB0 — Remappable I/O / Port B / PGED3 |
| Pin 17 | VDD — Supply voltage |
| Pin 18 | VSS — Ground |
| Pin 19 | OSC1/CLKI/RA3 — Crystal input or clock input / Port A |
| Pin 20 | OSC2/CLKO/RA2 — Crystal output or clock output / Port A |
| Pin 21 | RA1 — Port A I/O |
| Pin 22 | RA0 — Port A I/O |
| Pin 23 | RA4 — Port A I/O |
| Pin 24 | RA5 — Port A I/O |
| Pin 25 | RA6 — Port A I/O |
| Pin 26 | RA7 — Port A I/O |
| Pin 27 | RA8 — Port A I/O |
| Pin 28 | RA9 — Port A I/O |
| Pin 29 | RA10 — Port A I/O |
| Pin 30 | Vcap — Core voltage regulator decoupling |
| Pin 31 | RA11 — Port A I/O |
| Pin 32 | RA12 — Port A I/O |
| Pin 33 | RA13 — Port A I/O |
| Pin 34 | RA14 — Port A I/O |
| Pin 35 | RA15 — Port A I/O |
| Pin 36 | RC0 — Port C I/O |
| Pin 37 | RC1 — Port C I/O |
| Pin 38 | RC2 — Port C I/O |
| Pin 39 | RC3 — Port C I/O |
| Pin 40 | RC4 — Port C I/O |
| Pin 41 | RC5 — Port C I/O |
| Pin 42 | RC6 — Port C I/O |
| Pin 43 | RC7 — Port C I/O |
| Pin 44 | RC8 — Port C I/O |
| Pin 45 | RC9 — Port C I/O |
| Pin 46 | RC10 — Port C I/O |
| Pin 47 | RC11 — Port C I/O |
| Pin 48 | RC12 — Port C I/O |
| Pin 49 | RC13 — Port C I/O |
| Pin 50 | RC14 — Port C I/O |
| Pin 51 | RC15 — Port C I/O |
| Pin 52 | RD0 — Port D I/O |
| Pin 53 | RD1 — Port D I/O |
| Pin 54 | RD2 — Port D I/O |
| Pin 55 | RD3 — Port D I/O |
| Pin 56 | RD4 — Port D I/O |
| Pin 57 | RD5 — Port D I/O |
| Pin 58 | RD6 — Port D I/O |
| Pin 59 | RD7 — Port D I/O |
| Pin 60 | RD8 — Port D I/O |
| Pin 61 | RD9 — Port D I/O |
| Pin 62 | RD10 — Port D I/O |
| Pin 63 | RD11 — Port D I/O |
| Pin 64 | EP — Exposed thermal pad (must be soldered to GND) |
Typische Anwendungen
PIC24FJ64GA306T-I/MR ist geeignet für 6 Anwendungs: Battery-Powered IoT Sensor Node, Portable Medical Monitor, Smart Meter with LCD Readout, Industrial HMI Control Panel, USB HID Peripheral Device, Low-Power Remote Control.
Battery-Powered IoT Sensor Node
The PIC24FJ64GA306T-I/MR fits IoT sensor node designs because its nanoWatt XLP technology holds RAM and core state at approximately 340 nA in Low Voltage Sleep mode, allowing multi-year coin-cell operation. With 16 MIPS throughput at 32 MHz it can wake, sample, and transmit within tight duty cycles. Its 2.0V-3.6V range matches two AA cells directly, removing the need for boost converters. The CTMU peripheral enables accurate temperature and capacitive touch readings without extra analog ICs, and 85 I/O plus PPS routing accommodate many sensor buses in a single MCU.
Empfohlen
Portable Medical Monitor
The PIC24FJ64GA306T-I/MR supports portable medical monitors by combining deterministic 16 MIPS throughput for real-time signal processing with a 10-bit ADC for biopotential measurements such as pulse oximetry or ECG front ends. The 64 KB Flash accommodates compressed waveform buffers and BLE stack stubs, and the wide 2.0V-3.6V range simplifies lithium-battery management. Hardware CTMU and op-amp peripherals reduce external analog parts count, critical for small-form-factor wearable designs, and the industrial -40C to +85C rating covers home and clinical environments.
Empfohlen
Smart Meter with LCD Readout
The PIC24FJ64GA306T-I/MR is ideal for smart electricity and water meters because its integrated LCD segment driver directly controls character and bar displays without an external driver IC. Its 16 MIPS core performs metrology math, while the RTCC module maintains accurate time-of-use billing and tariff scheduling. The 85 I/O count accept multi-channel ADC inputs for current/voltage sensing, and nanoWatt XLP modes keep idle power below the regulatory standby limits of metering standards. Industrial temperature range ensures outdoor cabinet deployments operate reliably year-round.
Empfohlen
Industrial HMI Control Panel
The PIC24FJ64GA306T-I/MR drives industrial HMI panels thanks to its 16-bit parallel master port (EPMP) for fast LCD or external memory expansion, 85 I/O for keypads and discrete status LEDs, and 32 MHz performance for menu rendering. The 2.0V-3.6V range supports 3.3V-native backplane designs, and the integrated LCD controller eliminates a separate graphics IC. With PPS routing, UART, SPI, and I2C peripherals share buses flexibly with industrial transceivers such as RS-485 and CAN interfaces.
Empfohlen
USB HID Peripheral Device
The PIC24FJ64GA306T-I/MR pairs with an external USB transceiver such as the MCP2210 or MCP2200 to implement USB HID peripherals including keyboards, mice, and custom input devices. Its 32 MHz performance handles USB polling and HID report generation without offloading to a host PC. The 64 KB Flash accommodates HID descriptors and firmware update routines, while 8 KB RAM supports HID report buffers and protocol stacks. PPS flexibility lets designers route USB interrupt lines to convenient pins without rewiring.
Empfohlen
Low-Power Remote Control
The PIC24FJ64GA306T-I/MR suits battery-powered remote controls thanks to its 340 nA Sleep current and rapid wake-up from nanoWatt XLP modes. The 64 KB Flash stores keypad matrices and RF protocol stacks, while the CTMU supports capacitive touch keys without mechanical switches. The 16 MIPS core runs IR or sub-GHz RF encoding schemes such as NEC or LoRa, and the industrial temperature range ensures operation in automotive cabins and outdoor environments. PPS routing eases PCB antenna placement around the 64-pin VQFN footprint.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC24FJ64GA306T-I/MR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC24FJ128GA306T-I/MR | PIC24FJ128GL306T-I/MR | PIC24FJ64GA306-I/MR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin VQFN (9x9 mm) | 64-pin VQFN (9x9 mm) - same | 64-pin VQFN (9x9 mm) - same | 64-pin VQFN (9x9 mm) - same |
| Program Flash Memory | 64 KB (22K x 24) | 128 KB | 128 KB | 64 KB |
| RAM Size | 8 KB | 8 KB | 8 KB | 8 KB |
| Maximum CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Operating Voltage | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V |
| I/O Pins | 85 | 85 | 85 | 85 |
| LCD Driver | Integrated | Integrated | Integrated | Integrated |
| Peripheral Family | PIC24F XLP nanoWatt | PIC24F XLP nanoWatt | PIC24F XLP GL (enhanced crypto) | PIC24F XLP nanoWatt |
| Low Voltage Sleep Current | 340 nA typical | 340 nA typical | Comparable | 340 nA typical |
Wichtigste Unterscheidungsmerkmale
- Integrated LCD segment driver with up to 96 segments (vs. PIC24FJ64GA002)
- 340 nA Low Voltage Sleep current with full RAM retention (vs. PIC24FJ128GA306T-I/MR)
- 16-bit EPMP parallel master port for external memory and graphics (vs. PIC24FJ64GA004)
Designhinweise
Always place a low-ESR ceramic capacitor (typically 10 uF) on the Vcap pin of the PIC24FJ64GA306T-I/MR. The internal 1.8V core regulator requires this bulk capacitor for stability, and missing or undersized capacitors cause erratic resets or core undervoltage faults. Add a 100 nF decoupling capacitor close to each VDD pin pair to suppress switching transients.
Solder the exposed thermal pad (EP) of the 64-pin VQFN (9x9 mm) to a continuous ground copper pour. A floating or partially soldered pad increases junction temperature and degrades ADC accuracy because the pad serves as the primary thermal and electrical ground return. Follow Microchip's recommended land pattern with multiple thermal vias under the pad for best thermal performance.
Configure all unused I/O pins as digital outputs driving low (or as inputs with the internal weak pull-up enabled) before entering Sleep modes. Floating inputs draw transient current and can wake the device unexpectedly. Lock Peripheral Pin Select (PPS) registers early in initialization by clearing IOLOCK after configuring all peripherals to prevent accidental bus contention.
Estimated: at 32 MHz CPU with multiple peripherals active simultaneously, route high-speed signals (SPI clocks above 10 MHz, parallel master port) on inner PCB layers with continuous ground reference. Keep traces shorter than 50 mm and avoid via stubs to maintain signal integrity. The 10-bit ADC accuracy of the PIC24FJ64GA306T-I/MR is sensitive to digital switching noise, so isolate analog traces and decouple AVdd independently from Vdd where the package exposes a separate analog supply pin.
Compliance-Informationen
RoHS and REACH compliant per Microchip product page and DigiKey listings. Not AEC-Q100 qualified - PIC24FJ family is intended for industrial/consumer markets. Lead-free (Pb-free) reflow profile per JEDEC J-STD-020.
