PIC24FV16KM102-E/SS - 16-bit MCU, 16KB Flash, 32MHz | Microchip
Teilenummer: PIC24FV16KM102-E/SS ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.18 | $4,18 |
| 10 | $3.76 | $37,60 |
| 100 | $3.18 | $318,00 |
| 500 | $2.84 | $1.420,00 |
| 1.000 | $2.55 | $2.550,00 |
PIC24FV16KM102-E/SS Übersicht
A 16-bit microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data memory, and on-chip peripherals designed for embedded control. Within the broader taxonomy, a 16-bit MCU sits between 8-bit MCUs (lower performance, smaller address space) and 32-bit MCUs (higher performance, larger address space); PIC24F devices specifically target low-power cost-sensitive applications using Microchip's nanoWatt eXtreme Low Power (XLP) technology. This makes the PIC24FV16KM102 part of a power management IC family designed to extend battery life in portable and energy-harvesting designs.
Key features include nanoWatt XLP extreme low-power modes, peripheral pin select (PPS) for flexible I/O mapping, multiple communication interfaces including UART, SPI, and I2C, and comprehensive safety features such as brown-out detect, low-voltage detect (LVD), power-on reset (POR), and a watchdog timer. The Configurable Logic Cell allows hardware logic functions to be implemented inside the MCU, reducing BOM cost and PCB area.
The PIC24FV16KM102 is built on a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, providing a balance of code density and arithmetic throughput. With 16KB of Flash, it comfortably supports real-time operating systems, USB device stacks (via software), and sophisticated sensor-fusion algorithms in industrial and consumer products.
Typical applications include portable medical devices, IoT sensor nodes, consumer electronics remote controls, low-cost motor control, and battery-powered industrial sensors. Designers should leverage the XLP sleep modes (deep sleep currents typically under 100 nA) and ensure decoupling capacitors are placed close to VDD/VSS pins for ADC accuracy. Always refer to the manufacturer datasheet for full electrical characteristics and timing diagrams.
This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone, helping procurement and engineering teams evaluate the PIC24FV16KM102-E/SS against competing 16-bit MCU solutions.
Drop-in-Alternativen für PIC24FV16KM102-E/SS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24FV16KM102-E/SS (gleiche Bauform und Footprint) – abweichend in Package, Program Memory (Flash), ADC, Operating Temperature, EEPROM.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC24F16KM102-I/SS
✅ Drop-In✓ Auf Lager
$1.95 / Stück
Datenblatt ansehen →PIC24FV16KM102-I/SS
✅ Drop-In✓ Auf Lager
$1.15 / Stück
Datenblatt ansehen →PIC24FV32KM102-I/SS
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC24FV16KM202-I/SS
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.07 / Stück
Datenblatt ansehen →PIC24FV08KM102-I/SS
✅ Drop-In✓ Auf Lager
$1.15 / Stück
Datenblatt ansehen →PIC24FV16KA302-I/SS
✅ Drop-In✓ Auf Lager
$2.41 / Stück
Datenblatt ansehen →PIC24FV16KM102-E/SS Grenzwerte & elektrische Eigenschaften
| Core | PIC24F 16-bit RISC |
| Program Memory (Flash) | 16KB (5.5K x 24 words) |
| Data SRAM | 1KB |
| EEPROM | 512B |
| Maximum CPU Speed | 32 MHz |
| Operating Voltage Range | 2.0 V to 5.5 V |
| Comparators | Yes (on-chip) |
| PWM Modules | MCCP/SCCP |
| Configurable Logic Cell | Yes |
| Communication Interfaces | UART, SPI, I2C |
| Brown-out Detect | Yes |
| Low-Voltage Detect (LVD) | Yes |
| Power-on Reset (POR) | Yes |
| Watchdog Timer | Yes |
| Gehäuse | 28-SSOP (5.30mm body width) |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
| Lead-Free | Yes |
| Betriebstemperaturbereich | -40C to +125C (extended, E suffix) |
PIC24FV16KM102-E/SS Pin-Konfiguration
| Pin 1 | MCLR — Master Clear (reset) input, active low |
| Pin 2 | RA0 — Port A bit 0 / AN0 |
| Pin 3 | RA1 — Port A bit 1 / AN1 |
| Pin 4 | RB0 — Port B bit 0 |
| Pin 5 | RB1 — Port B bit 1 |
| Pin 6 | RB2 — Port B bit 2 |
| Pin 7 | RB3 — Port B bit 3 |
| Pin 8 | VSS — Ground reference |
| Pin 9 | RA2 — Port A bit 2 / AN2 |
| Pin 10 | RA3 — Port A bit 3 / AN3 |
| Pin 11 | RA4 — Port A bit 4 |
| Pin 12 | RA5 — Port A bit 5 |
| Pin 13 | VDD — Positive supply voltage |
| Pin 14 | RB4 — Port B bit 4 |
| Pin 15 | RB5 — Port B bit 5 |
| Pin 16 | RB6 — Port B bit 6 / ICSP programming clock |
| Pin 17 | RB7 — Port B bit 7 / ICSP programming data |
| Pin 18 | RB8 — Port B bit 8 |
| Pin 19 | RB9 — Port B bit 9 |
| Pin 20 | RC0 — Port C bit 0 |
| Pin 21 | RC1 — Port C bit 1 |
| Pin 22 | RC2 — Port C bit 2 |
| Pin 23 | RC3 — Port C bit 3 |
| Pin 24 | RC4 — Port C bit 4 |
| Pin 25 | RC5 — Port C bit 5 |
| Pin 26 | RC6 — Port C bit 6 |
| Pin 27 | RC7 — Port C bit 7 |
| Pin 28 | VDD — Positive supply voltage (second VDD pin) |
Typische Anwendungen
PIC24FV16KM102-E/SS ist geeignet für 7 Anwendungs: Battery-Powered IoT Sensor Nodes, Portable Medical Devices, Consumer Electronics Remote Controls, Low-Cost Motor Control, Industrial Sensor Transmitters, Automotive Body Electronics, Smart Home Hub Peripherals.
Battery-Powered IoT Sensor Nodes
The PIC24FV16KM102-E/SS fits battery-powered IoT sensor nodes because its nanoWatt XLP technology delivers deep-sleep currents below 1 uA, allowing years of operation from a single CR2032 coin cell. The 2.0V to 5.5V operating range permits direct connection to Li-ion or alkaline battery stacks without level shifting. Its 16KB Flash is sufficient for over-the-air (OTA) bootloader code plus application logic for sensors like temperature, humidity, and motion. The 12-bit ADC provides adequate resolution for most analog sensor signal chains, while the UART/SPI/I2C peripherals connect to radios, displays, and EEPROM memories. Compared to 32-bit Cortex-M0 alternatives, the PIC24FV16KM102 offers lower cost per node and a more mature MPLAB X IDE ecosystem with extensive peripheral libraries.
Empfohlen
Portable Medical Devices
The PIC24FV16KM102-E/SS is well-suited for portable medical devices such as blood pressure monitors, glucose meters, and pulse oximeters. Its extended -40C to +125C temperature range (E suffix) supports FDA-cleared device thermal profiles and accelerated life testing. The 12-bit ADC provides adequate resolution for biosensor signal conditioning from electrodes or optical sensors. XLP low-power modes extend battery life, a critical factor for handheld medical devices that must operate weeks or months between battery changes. The Configurable Logic Cell can replace external gates in signal-path designs, reducing BOM cost and PCB area. The 28-SSOP package is well established in medical device assemblies and compatible with automated pick-and-place and reflow processes.
Empfohlen
Consumer Electronics Remote Controls
The PIC24FV16KM102-E/SS is ideal for advanced consumer remote controls requiring IR transmission, capacitive touch sensing, and wireless connectivity. The MCCP/SCCP PWM modules generate precise IR carrier frequencies (36-40 kHz typical) for consumer electronics protocols, while the on-chip comparators can be used for battery voltage monitoring. Its low active current and sub-1 uA sleep current allow remote controls to operate for years on standard AAA batteries. The peripheral pin select (PPS) feature allows designers to route UART, SPI, or I2C to virtually any GPIO pin, simplifying PCB layout and allowing flexible button matrix designs. This same MCU is widely used in TV remotes, set-top box controllers, and smart home remote units.
Empfohlen
Low-Cost Motor Control
The PIC24FV16KM102-E/SS fits low-cost motor control applications including small DC brushed motors, stepper motor drivers, and BLDC sensorless control. The MCCP/SCCP PWM modules with complementary output and dead-band control provide the precise timing required for H-bridge drivers, while the 32MHz CPU clock supports field-oriented control (FOC) algorithms at moderate RPM. The 12-bit ADC samples back-EMF or current-sense signals with sufficient resolution for torque control. The Configurable Logic Cell can implement hardware protection circuits that shut down PWM outputs in microseconds without CPU intervention, improving safety. The 28-SSOP package is compact enough for integration into small motor housings.
Empfohlen
Industrial Sensor Transmitters
The PIC24FV16KM102-E/SS is well-suited for industrial 4-20 mA sensor transmitters and HART-protocol field devices. Its 2.0V to 5.5V supply range operates from loop-powered 24V systems through simple linear regulators, while its 12-bit ADC digitizes bridge sensor, RTD, or thermocouple signals with adequate accuracy for process control. The Configurable Logic Cell implements safety interlocks and sensor diagnostics without external logic, reducing PCB complexity. The extended -40C to +125C temperature range (E suffix) supports outdoor and hazardous-location deployments. The UART peripheral can be configured for HART modem communication with a small external demodulator.
Empfohlen
Automotive Body Electronics
The PIC24FV16KM102-E/SS can be used in non-safety automotive body electronics such as interior lighting controllers, seat comfort modules, and HVAC blend door actuators. Its 2.0V to 5.5V supply range tolerates 12V battery transients when paired with proper TVS protection, while its extended -40C to +125C temperature range handles under-dash and engine-bay-adjacent thermal conditions. The PWM modules drive LED strings and small DC motors, while the comparators monitor over-current conditions. Note that AEC-Q100 qualified variants are available separately for safety-critical applications; this E-suffix part supports general body and convenience functions in non-safety-critical systems.
Empfohlen
Smart Home Hub Peripherals
The PIC24FV16KM102-E/SS fits smart home hub peripherals such as battery-powered door/window sensors, water leak detectors, and temperature/humidity monitors. Its sub-1 uA deep sleep current allows multi-year battery life in Zigbee, Thread, or BLE-beacon sensor endpoints. The 16KB Flash supports protocol stacks like Zigbee 3.0 or Matter, while the 1KB RAM is adequate for sensor data buffering. The Configurable Logic Cell can wake the MCU on specific sensor events without CPU polling, extending battery life further. The 12-bit ADC digitizes environmental sensor outputs with sufficient precision for home automation triggers.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC24FV16KM102-E/SS – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC24F16KM102-I/SS | PIC24FV32KM102-I/SS | PIC24FV08KM102-I/SS |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-SSOP | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same |
| Flash Memory | 16KB | 16KB | 32KB | 8KB |
| SRAM | 1KB | 1KB | 2KB | 512B |
| EEPROM | 512B | 512B | 512B | 512B |
| Max CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Voltage | 2.0 V to 5.5 V | 1.8 V to 3.6 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Temperature Range | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit |
| Approximate Unit Price (qty 1, USD) | $4.18 | ~$3.90 | ~$4.85 | ~$3.60 |
Wichtigste Unterscheidungsmerkmale
- Extended temperature range for harsh environments (vs. PIC24F16KM102-I/SS)
- Dual 3V/5V operation (vs. PIC24F16KM102-I/SS (F variant, 1.8-3.6V only))
- 16KB Flash at competitive price point (vs. PIC24FJ64GB002 series)
Designhinweise
Take advantage of nanoWatt XLP technology by using Deep Sleep mode (DSleep) for battery-powered designs; deep-sleep current is typically below 1 uA with RTC running. The device supports multiple wake-up sources including Real-Time Clock/Calendar alarm, external interrupts, and peripheral triggers, allowing designers to keep the CPU off for extended periods. Always include a 10 uF bulk capacitor plus a 100 nF decoupling capacitor on each VDD/VSS pair (the 28-SSOP has two VDD pins at pin 13 and pin 28) to suppress switching transients during wake-up events.
Route the ICSP programming pins (RB6/PGECx and RB7/PGEDx) directly to an in-circuit programming header without series resistors, as Microchip programmers drive these lines actively. Keep analog signals (AN0-ANx) physically separated from digital switching traces; place the 12-bit ADC reference capacitor (typically 0.1 uF) close to the AVSS/AVDD pins to minimize ADC noise. The exposed pad on the SSOP-28 is absent (SSOP does not have a thermal pad), but adequate ground plane copper connected to both VSS pins (8 and 27) provides thermal dissipation and low-impedance return paths.
Do not exceed the absolute maximum VDD of 5.5V; the 'FV' variant tolerates up to 5.5V but transients above this can cause latch-up. Ensure the MCLR pin is pulled high through a 10 kohm resistor and has a 100 nF capacitor to ground for noise immunity, unless using the internal MCLR disable configuration. When migrating from PIC24FJ series, note that the PIC24FV variant requires slightly different configuration bit settings for the higher voltage range; review the configuration bit tables in the datasheet before reuse. The peripheral pin select (PPS) feature must be unlocked via PPSLOCK sequence before remapping, otherwise writes to PPS registers will be ignored silently.
Compliance-Informationen
RoHS compliant and lead-free per Microchip product page. Not AEC-Q100 qualified; for AEC-Q100 automotive applications use dedicated automotive-grade PIC24 variants. Halogen-free status not explicitly stated in verified data.
