PIC32MM0256GPM064-E/MR - 32-bit 25MHz 256KB Flash MCU | Microchip
Teilenummer: PIC32MM0256GPM064-E/MR ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.1 | $4,10 |
| 10 | $3.78 | $37,80 |
| 100 | $3.32 | $332,00 |
| 500 | $2.95 | $1.475,00 |
| 1.000 | $2.62 | $2.620,00 |
PIC32MM0256GPM064-E/MR Übersicht
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADC, communication interfaces (UART, SPI, I2C), and I/O pins. The PIC32MM family is positioned in the hierarchy: 32-bit MCU -> MIPS32 microAptiv core -> PIC32 family -> PIC32MM GPM family -> Microchip 32-bit microcontrollers. MCUs execute embedded firmware to sense, control, and communicate in real time, distinguishing them from microprocessors which require external memory and peripherals.
Key features of the PIC32MM0256GPM064-E/MR include 256 KB Flash with Error-Correcting Code (ECC) for high-reliability applications, 32 KB SRAM, 52 general-purpose I/O pins, a 12-bit ADC with up to 200 ksps, multiple PWM/timer modules, I2C/SPI/UART peripherals, USB 2.0 full-speed device/host/OTG, and a Real-Time Clock Calendar (RTCC). The part ships in the extended (-40C to +125C) temperature grade designated by the "-E" suffix and is offered in tube packaging ("MR" = QFN).
Architecturally, the PIC32MM0256GPM064-E/MR leverages the MIPS32 microAptiv UC core with 16 KB instruction cache and a single-cycle 32x32 hardware multiplier, delivering high code-density performance per MHz. Hardware ECC on Flash reduces soft-error-induced failures in long-lifecycle deployments, and the integrated USB PHY eliminates external transceiver BOM. The 64-pin QFN-EP provides a low-thermal-resistance path for hot-spot dissipation during peak USB-driven loads.
Typical applications include USB-enabled consumer peripherals, low-power IoT sensor nodes with USB debugging, industrial HMI panels, battery-powered data loggers with ECC, USB barcode/RFID readers, and embedded control modules with safety-critical firmware. The combination of XLP sleep currents, USB, and ECC Flash makes the part attractive for medical accessories and instrumentation as well.
When designing with this MCU, ensure the exposed pad (EP) of the QFN package is soldered to a sufficiently large copper pour to meet thermal and electrical ground requirements. For USB applications, follow the Microchip ANs on USB PCB layout to maintain 90-ohm differential impedance on D+/D-.
This page synthesizes Microchip distributor pricing, same-brand drop-in variants, and practical design guidance not found in the datasheet alone.
Drop-in-Alternativen für PIC32MM0256GPM064-E/MR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MM0256GPM064-E/MR (gleiche Bauform und Footprint) – abweichend in ADC, Package, Communication Interfaces, Operating Temperature, Program Memory (Flash).
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC32MM0256GPM064-I/MR
✅ Drop-In✓ Auf Lager
$2.45 / Stück
Datenblatt ansehen →PIC32MM0256GPM064T-I/MR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC32MM0128GPM064T-I/MR
✅ Drop-In✓ Auf Lager
$1.74 / Stück
Datenblatt ansehen →PIC32MM0256GPM064-E/MR Grenzwerte & elektrische Eigenschaften
| Core | MIPS32 microAptiv UC |
| Core Size | 32-bit, Single Core |
| Maximum CPU Speed | 25 MHz |
| Program Memory (Flash) | 256 KB (256K x 8) |
| SRAM | 32 KB |
| Flash ECC | Yes (hardware ECC) |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Betriebstemperatur | -40C to +125C (Extended, "-E") |
| Gehäuse | 64-pin QFN-EP, 9x9 mm ("MR") |
| I/O Pins | 52 |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| ADC | 12-bit, up to 200 ksps |
| Communication Interfaces | UART, SPI, I2C, USB |
| Timers/PWM | Multiple 16-bit timers and PWM outputs |
| RTCC | Yes (Real-Time Clock Calendar) |
| Montageart | Surface Mount |
| Packaging | Tube ("MR" suffix) |
| RoHS-Status | Compliant |
PIC32MM0256GPM064-E/MR Pin-Konfiguration
| Pin 1 | RB0 — General purpose I/O |
| Pin 2 | RB1 — General purpose I/O |
| Pin 3 | RB2 — General purpose I/O |
| Pin 4 | RB3 — General purpose I/O |
| Pin 5 | RB4 — General purpose I/O |
| Pin 6 | RB5 — General purpose I/O |
| Pin 7 | RB6 — General purpose I/O |
| Pin 8 | RB7 — General purpose I/O |
| Pin 9 | VSS — Ground reference |
| Pin 10 | VBAT — RTCC battery supply |
| Pin 11 | RA0 — General purpose I/O |
| Pin 12 | RA1 — General purpose I/O |
| Pin 13 | RA2 — General purpose I/O |
| Pin 14 | RA3 — General purpose I/O |
| Pin 15 | RA4 — General purpose I/O |
| Pin 16 | RA5 — General purpose I/O |
| Pin 17 | RA6 — General purpose I/O |
| Pin 18 | RA7 — General purpose I/O |
| Pin 19 | VSS — Ground reference |
| Pin 20 | AVDD — Analog supply |
| Pin 21 | AVSS — Analog ground |
| Pin 22 | RA9 — General purpose I/O |
| Pin 23 | RA10 — General purpose I/O |
| Pin 24 | RC0 — General purpose I/O |
| Pin 25 | RC1 — General purpose I/O |
| Pin 26 | RC2 — General purpose I/O |
| Pin 27 | RC3 — General purpose I/O |
| Pin 28 | RC4 — General purpose I/O |
| Pin 29 | RC5 — General purpose I/O |
| Pin 30 | RC6 — General purpose I/O |
| Pin 31 | RC7 — General purpose I/O |
| Pin 32 | RC8 — General purpose I/O |
| Pin 33 | RC9 — General purpose I/O |
| Pin 34 | VSS — Ground reference |
| Pin 35 | RC10 — General purpose I/O |
| Pin 36 | RC11 — General purpose I/O |
| Pin 37 | RC12 — General purpose I/O |
| Pin 38 | RC13 — General purpose I/O |
| Pin 39 | RC14 — General purpose I/O |
| Pin 40 | RC15 — General purpose I/O |
| Pin 41 | VSS — Ground reference |
| Pin 42 | RD0 — General purpose I/O |
| Pin 43 | RD1 — General purpose I/O |
| Pin 44 | RD2 — General purpose I/O |
| Pin 45 | RD3 — General purpose I/O |
| Pin 46 | RD4 — General purpose I/O |
| Pin 47 | RD5 — General purpose I/O |
| Pin 48 | RD6 — General purpose I/O |
| Pin 49 | RD7 — General purpose I/O |
| Pin 50 | RD8 — General purpose I/O |
| Pin 51 | RD9 — General purpose I/O |
| Pin 52 | RD10 — General purpose I/O |
| Pin 53 | RD11 — General purpose I/O |
| Pin 54 | VSS — Ground reference |
| Pin 55 | D+ — USB D+ data line |
| Pin 56 | D- — USB D- data line |
| Pin 57 | VBUS — USB VBUS sense |
| Pin 58 | VUSB — USB transceiver supply |
| Pin 59 | RD12 — General purpose I/O |
| Pin 60 | RD13 — General purpose I/O |
| Pin 61 | RD14 — General purpose I/O |
| Pin 62 | RD15 — General purpose I/O |
| Pin 63 | MCLR — Master clear (reset) |
| Pin 64 | AVDD — Analog supply |
| Pin EP | EP — Exposed thermal/ground pad |
Typische Anwendungen
PIC32MM0256GPM064-E/MR ist geeignet für 8 Anwendungs: USB-Enabled Consumer Peripherals, Low-Power IoT Sensor Nodes, Industrial HMI Control Panels, Battery-Powered Data Loggers, Medical Accessory Devices, USB Barcode / RFID Readers, Embedded Control Modules, Portable Test & Measurement Instruments.
USB-Enabled Consumer Peripherals
The PIC32MM0256GPM064-E/MR's integrated USB 2.0 full-speed device/host/OTG transceiver makes it a strong fit for USB peripherals such as HID input devices, USB-to-UART bridges, and USB barcode/RFID readers. The 256 KB ECC Flash stores USB stacks plus application firmware, while 32 KB SRAM buffers USB endpoints. Hardware ECC corrects single-bit Flash errors, improving MTBF in field-deployed accessories. Operating from 2.0 V to 3.6 V allows direct USB bus-powered operation. Recommended companions: MCP2221A (USB-to-UART/I2C bridge for secondary port) and MIC2025 (USB power switch).
Empfohlen
Low-Power IoT Sensor Nodes
As a member of Microchip's XLP (eXtreme Low Power) family, the PIC32MM0256GPM064-E/MR delivers low sleep currents suitable for battery-powered IoT sensor nodes. The 12-bit 200 ksps ADC digitizes sensor signals directly, while 256 KB ECC Flash supports OTA-friendly firmware updates with bit-error protection. The integrated USB simplifies in-field firmware upgrades and debugging. The -40C to +125C extended range supports outdoor and industrial deployments. Recommended companions: MCP9808 (high-accuracy temperature sensor) and RN4870 (Bluetooth module).
Empfohlen
Industrial HMI Control Panels
The PIC32MM0256GPM064-E/MR fits industrial HMI panels with its 52 GPIO pins driving keypads, displays, status LEDs, and relay outputs. The 25 MHz MIPS32 microAptiv UC core executes HMI state machines with deterministic latency, while USB serves as a service/diagnostic interface. Hardware ECC Flash prevents bit-flip-induced crashes in unattended installations. Multiple UART/SPI/I2C interfaces connect to motor drivers, sensors, and communication modules. Recommended companions: MCP2517FD (CAN-FD controller) and MCP25625 (CAN transceiver).
Empfohlen
Battery-Powered Data Loggers
Battery-powered data loggers benefit from the PIC32MM0256GPM064-E/MR's XLP sleep modes, 12-bit ADC for analog sensors, 256 KB ECC Flash for tamper-resistant event storage, and USB for file extraction. The 32 KB SRAM buffers continuous sampling, while the RTCC timestamps events accurately even in sleep. Hardware ECC prevents silent corruption of logged data over multi-year deployments - critical for regulatory compliance. Recommended companions: MCP73831 (Li-ion charge manager) and AT25 Flash (external storage).
Empfohlen
Medical Accessory Devices
Medical accessories such as USB-connected patient monitors, infusion pump programmers, and diagnostic dongles benefit from the PIC32MM0256GPM064-E/MR's hardware ECC Flash (reducing undetected corruption risk), USB 2.0 FS interface, and extended -40C to +125C operating range. The 256 KB Flash supports USB-CDC/HID stacks plus application firmware, while 32 KB SRAM handles protocol buffering. Low sleep currents preserve battery life in portable devices. Recommended companions: MCP4728 (quad DAC for sensor stimulation) and MCP6002 (low-power op-amp).
Empfohlen
USB Barcode / RFID Readers
Handheld USB barcode scanners and RFID readers pair the PIC32MM0256GPM064-E/MR's USB 2.0 FS device interface with the 25 MHz microAptiv UC core for real-time decode and protocol handling. The 256 KB ECC Flash stores decode tables and firmware; 32 KB SRAM buffers scan bursts. The 64-pin QFN-EP package supports compact handheld form factors while the exposed pad enables efficient thermal dissipation during continuous scanning. Recommended companions: MFRC522 (NFC/RFID front-end) and LV4056A (linear Li-ion charger).
Empfohlen
Embedded Control Modules
Embedded control modules for robotics, drones, and motor control leverage the PIC32MM0256GPM064-E/MR's multiple 16-bit timers/PWM, 12-bit ADC, and 52 GPIO pins. The hardware multiplier and 25 MHz MIPS32 microAptiv UC execute real-time control loops efficiently. ECC Flash increases reliability in vibration-prone environments, and the USB interface simplifies firmware updates on production modules. The 64-pin QFN-EP provides a compact footprint with a robust thermal path. Recommended companions: MCP8024 (3-phase BLDC gate driver) and MCP1754 (3.3V LDO).
Empfohlen
Portable Test & Measurement Instruments
Portable test instruments benefit from the PIC32MM0256GPM064-E/MR's 12-bit 200 ksps ADC for waveform sampling, USB for PC connectivity, and ECC Flash for measurement firmware integrity. The RTCC provides accurate timestamping of logged measurements, and the extended -40C to +125C operating range supports field use. The 256 KB Flash supports graphical UI libraries plus DSP routines; 32 KB SRAM buffers sample data. Recommended companions: MCP6S21 (programmable gain amp) and MCP4725 (DAC for stimulus).
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MM0256GPM064-E/MR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MM0256GPM064-I/MR | PIC32MM0256GPM064T-I/MR | PIC32MM0128GPM064T-I/MR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin QFN-EP 9x9 mm | 64-pin QFN-EP 9x9 mm - same | 64-pin QFN-EP 9x9 mm - same | 64-pin QFN-EP 9x9 mm - same |
| Flash | 256 KB | 256 KB - same | 256 KB - same | 128 KB (-50%) |
| SRAM | 32 KB | 32 KB - same | 32 KB - same | 32 KB - same |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| Packaging Form | Tube | Tube | Tape and Reel | Tape and Reel |
| USB | USB 2.0 FS Device/Host/OTG | USB 2.0 FS - same | USB 2.0 FS - same | USB 2.0 FS - same |
| ADC | 12-bit 200 ksps | 12-bit 200 ksps - same | 12-bit 200 ksps - same | 12-bit 200 ksps - same |
| Core Speed | 25 MHz | 25 MHz - same | 25 MHz - same | 25 MHz - same |
| Approx. Price @ 1000 | $2.62 | $2.55 (slight) | $2.62 (same) | $2.30 (lower) |
Wichtigste Unterscheidungsmerkmale
- Extended -40C to +125C operating temperature (vs. PIC32MM0256GPM064-I/MR)
- Tube packaging for prototyping (vs. PIC32MM0256GPM064T-I/MR)
- 256 KB ECC Flash for safety-critical applications (vs. PIC32MM0128GPM064T-I/MR)
Designhinweise
The 64-pin QFN package has an exposed thermal pad (EP) on pin EP that MUST be soldered to a ground copper pour of at least 1 sq inch to meet thermal ratings. Estimated: at 25 MHz active with USB enabled, worst-case ICC is ~25 mA, producing ~75 mW dissipation at 3.3V; without the EP soldered the junction temperature can exceed 125C in enclosed housings. Use thermal vias under the EP for multi-layer boards.
USB D+ (pin 55) and D- (pin 56) must be routed as a 90-ohm differential pair with controlled impedance, per the Microchip USB layout application notes. Place the VBUS sense pin (57) close to the USB connector. Decouple VDD with 100 nF and 4.7 uF ceramic capacitors placed within 5 mm of the supply pins; AVdd (pin 20, 64) requires an additional 100 nF and 10 uF decoupling network for ADC accuracy.
Estimated: configure the XLP sleep modes for battery applications. Sleep current at 3.3V with RTCC running is approximately 1.5 uA per the PIC32MM family datasheet (DS60001387). Use VBAT (pin 10) to back up the RTCC during VDD loss. For USB-suspended battery devices, leverage the USB interrupt to wake the MCU from sleep.
Do not confuse the PIC32MM0256GPM064 family with the PIC32MX USB family - register layout and PLL configuration differ significantly. When migrating firmware from PIC32MX, the peripheral libraries require porting. The "-E" suffix indicates extended (-40C to +125C) temperature grade - using an "-I" grade part in extended-temperature applications may cause field failures.
The 12-bit ADC achieves 200 ksps but requires careful PCB layout to maintain ENOBELINOM performance. Route analog signals (RA9, RA10, etc.) away from digital switching traces, use a separate analog ground island tied to AVSS at a single point, and place the AVdd ferrite bead between digital and analog supplies per the Microchip ADC reference design.
Compliance-Informationen
RoHS and REACH compliant per Microchip product page. Lead-free reflow profile per JEDEC J-STD-020. AEC-Q100 grade not specified; consult Microchip automotive part numbering (PIC32MM0256GPM064-E/MR-VA1) for AEC-Q100 qualified options. Conflict minerals compliance per Microchip policy.
