PIC32MX150F128B-I/SS - 40MHz 32-bit MCU 128KB Flash | Microchip
Teilenummer: PIC32MX150F128B-I/SS ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.16 | $4,16 |
| 10 | $3.78 | $37,80 |
| 100 | $3.34 | $334,00 |
| 500 | $2.95 | $1.475,00 |
| 1.000 | $2.65 | $2.650,00 |
PIC32MX150F128B-I/SS Übersicht
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADCs, timers, communication interfaces) into one device. Within the broader hierarchy, the PIC32MX1xx family belongs to 32-bit microcontrollers, which sit alongside 8-bit (PIC10/12/16), 16-bit (PIC24, dsPIC33), and 32-bit (Cortex-M) MCU classes, all serving as the central processing unit for embedded systems across consumer, industrial, and automotive markets.
Key features include less than 0.5 mA/MHz active current consumption, two I2S/SPI modules for codec and serial communication, Peripheral Pin Select (PPS) for flexible pin mapping, Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, 1 ns high-resolution time measurement via the Capture/Compare/PWM peripheral, on-chip temperature measurement, and a Charge Time Measurement Unit (CTMU) for capacitive sensing. The integrated USB 2.0 full-speed Device/Host/OTG controller is a hallmark of the PIC32MX1xx/2xx family.
Architecturally, the MIPS32 M4K core delivers 1.56 DMIPS/MHz and runs at 40 MHz with a zero-wait-state Flash interface. The 5-stage pipeline, hardware multiply/divide, and 32-bit-wide datapath give the PIC32MX150F128B roughly 5x the performance of a comparable PIC24 16-bit MCU. The 10-bit 1 Msps ADC with up to 13 input channels, five 16-bit timers, and two I2C plus two UART interfaces provide extensive analog and digital integration.
Typical applications include USB audio peripherals (headsets, microphones, speakers), capacitive touch human-machine interfaces, industrial control panels with graphics, sensor hub data aggregation, and low-cost 32-bit embedded nodes. The combination of USB, I2S, and PMP makes this device particularly attractive for consumer audio accessories and industrial HMI modules where a single-chip BOM reduces total cost.
Designers should note that achieving 40 MHz operation requires VDD between 2.3V and 3.6V, with careful decoupling of AVDD/AVSS and VDD/VSS pin pairs. The ICSP programming interface uses PGECx/PGEDx pin pairs and requires all VSS and VDD pins to be connected for reliable in-circuit programming and debugging.
This page synthesizes distributor pricing, drop-in alternative MPNs from the same PIC32MX1xx/2xx family, and practical design notes not consolidated in any single manufacturer document.
Drop-in-Alternativen für PIC32MX150F128B-I/SS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MX150F128B-I/SS (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Timers, ADC, CTMU.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC32MX150F128BT-I/SS
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC32MX150F128B-50I/SS
✅ Drop-In✓ Auf Lager
$3.2 / Stück
Datenblatt ansehen →PIC32MX250F128B-I/SS
✅ Drop-In✓ Auf Lager
$3.17 / Stück
Datenblatt ansehen →PIC32MX130F128B-I/SS
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
PIC32MX150F128B-I/SS Grenzwerte & elektrische Eigenschaften
| Core Architecture | MIPS32 M4K |
| CPU Core | 32-bit RISC |
| Maximum Clock Speed | 40 MHz |
| Performance | 1.56 DMIPS/MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| SRAM | 32 KB |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| Active Current Consumption | < 0.5 mA/MHz |
| Betriebstemperatur | -40C to +85C (Industrial, I grade) |
| I/O Pins | 21 |
| ADC | 10-bit, up to 13 channels, 1 Msps |
| Timers | 5 x 16-bit |
| Communication Interfaces | 2x I2C, 2x UART, 2x I2S/SPI, USB 2.0 FS Device/Host/OTG |
| Special Features | PPS, PMP, mTouch, CTMU, 1 ns time measurement, on-chip temperature sensor |
| Gehäuse | 28-SSOP (0.65 mm pitch, 5.30 mm body) |
| Montageart | Surface Mount |
| MSL-Level | 1 (per JEDEC J-STD-020) |
| RoHS-Status | Compliant |
| Programming Interface | ICSP via PGECx/PGEDx pairs |
PIC32MX150F128B-I/SS Pin-Konfiguration
| Pin 1 | RPB0/AN0 — Remappable I/O, analog input 0 |
| Pin 2 | RPB1/AN1 — Remappable I/O, analog input 1 |
| Pin 3 | RPB2/AN2 — Remappable I/O, analog input 2 |
| Pin 4 | RPB3/AN3 — Remappable I/O, analog input 3 |
| Pin 5 | VSS — Ground reference |
| Pin 6 | RPB4/AN4 — Remappable I/O, analog input 4 |
| Pin 7 | RPB5/AN5 — Remappable I/O, analog input 5 |
| Pin 8 | VDD — Positive supply (2.3V to 3.6V) |
| Pin 9 | RPB6/PGEC2 — Remappable I/O, ICSP clock 2 |
| Pin 10 | RPB7/PGED2 — Remappable I/O, ICSP data 2 |
| Pin 11 | RPC6 — Remappable I/O |
| Pin 12 | RPC7 — Remappable I/O |
| Pin 13 | RPC8 — Remappable I/O |
| Pin 14 | RPC9 — Remappable I/O |
| Pin 15 | VSS — Ground reference |
| Pin 16 | VDD — Positive supply (2.3V to 3.6V) |
| Pin 17 | RPC0 — Remappable I/O |
| Pin 18 | RPC1 — Remappable I/O |
| Pin 19 | RPC2 — Remappable I/O |
| Pin 20 | RPC3 — Remappable I/O |
| Pin 21 | RPC4 — Remappable I/O |
| Pin 22 | AVDD — Analog positive supply (tie to VDD) |
| Pin 23 | AVSS — Analog ground (tie to VSS) |
| Pin 24 | RPA0 — Remappable I/O |
| Pin 25 | RPA1 — Remappable I/O |
| Pin 26 | RPA2 — Remappable I/O |
| Pin 27 | RPA3 — Remappable I/O |
| Pin 28 | OSC1 — Crystal/oscillator input or external clock |
Typische Anwendungen
PIC32MX150F128B-I/SS ist geeignet für 7 Anwendungs: USB Audio Peripherals, Capacitive Touch HMI Panels, Industrial Sensor Hubs, Graphics LCD Display Controllers, Portable Data Loggers, USB Human Interface Devices (HID), IoT Edge Sensor Nodes.
USB Audio Peripherals
The PIC32MX150F128B-I/SS fits USB audio peripherals because its integrated USB 2.0 full-speed Device/Host/OTG controller, dual I2S interfaces, and 32 KB SRAM cover USB headset, microphone, and USB DAC designs. According to the Microchip PIC32MX1XX/2XX datasheet, the 40 MHz MIPS32 M4K core delivers enough MIPS for USB protocol handling plus audio stream processing at 48 kHz sample rates. The on-chip 10-bit ADC handles microphone bias monitoring. Placed as the single-chip solution, it eliminates external USB interface ICs and reduces BOM cost for consumer audio accessories. The USB D+/D- pins require careful PCB routing with 90 ohm differential impedance.
Empfohlen
Capacitive Touch HMI Panels
The PIC32MX150F128B-I/SS is well-suited for capacitive touch HMI panels because the Charge Time Measurement Unit (CTMU) provides hardware-based touch measurement with sub-nanosecond resolution, and the mTouch library supports buttons, sliders, and proximity sensing. The 128 KB Flash accommodates the mTouch firmware stack, and 32 KB SRAM handles touch event buffers. According to the Microchip datasheet, the CTMU works with the on-chip 10-bit ADC for high SNR touch readings. Used in industrial control panels, kitchen appliances, and consumer electronics, the device replaces mechanical switches with a sealed glass interface while the Parallel Master Port (PMP) drives character or graphic LCDs.
Empfohlen
Industrial Sensor Hubs
The PIC32MX150F128B-I/SS fits industrial sensor hubs because the 40 MHz MIPS32 M4K core, two I2C, two UART, and two SPI interfaces enable multi-sensor aggregation from temperature, pressure, and motion sensors simultaneously. The 10-bit ADC with up to 13 input channels supports direct analog transducer interfacing. According to the Microchip datasheet, the 2.3V-3.6V supply range accommodates 3.3V industrial rails, and the -40C to +85C industrial temperature rating covers most factory environments. Used in process control remote I/O nodes and machine health monitors, the device processes and forwards sensor data via UART or industrial Ethernet expansion modules.
Empfohlen
Graphics LCD Display Controllers
The PIC32MX150F128B-I/SS drives small graphical LCD panels because the Parallel Master Port (PMP) provides an 8-bit parallel interface to character and graphic displays up to QVGA resolution. According to the Microchip family datasheet, the PMP supports Intel 8080 and Motorola 6800 modes with dedicated control signals. The 32 KB SRAM stores frame buffers for small displays, while 128 KB Flash holds graphics libraries and fonts. Used in appliance control panels, medical device readouts, and portable instruments, this configuration replaces dedicated graphics controllers, reducing total system cost and board space.
Empfohlen
Portable Data Loggers
The PIC32MX150F128B-I/SS fits portable data loggers because the low < 0.5 mA/MHz active current consumption, multiple Sleep modes, and on-chip 10-bit ADC extend battery life across extended measurement campaigns. The 128 KB Flash stores log records and compression algorithms, while 32 KB SRAM buffers incoming ADC samples. According to the Microchip datasheet, the CTMU provides high-resolution time-stamping for sensor events. Used in environmental monitors and wearable health devices, the device achieves months of operation on a single coin cell when duty-cycling properly. SPI interfaces connect to external Flash or SD card storage.
Empfohlen
USB Human Interface Devices (HID)
The PIC32MX150F128B-I/SS implements USB HID devices (keyboards, mice, custom HID) because the integrated USB 2.0 FS controller and the Microchip USB stack reduce HID firmware complexity to a few KB. The 21 I/O pins handle up to 21 buttons or matrix-scanned key switches. According to the Microchip family datasheet, USB enumeration, suspend, and resume are handled in hardware. Used in industrial keypads, gaming peripherals, and barcode scanners, the device delivers low-latency HID reports at 1000 Hz polling rates without external USB chips. PPS allows flexible pin assignment for matrix scanning.
Empfohlen
IoT Edge Sensor Nodes
The PIC32MX150F128B-I/SS works as an IoT edge sensor node because the MIPS32 M4K core at 40 MHz runs lightweight TCP/IP stacks, the two UARTs bridge to wireless modules (Wi-Fi, LoRa, BLE), and the CTMU/ADC handle sensor interfaces. According to the Microchip datasheet, the 128 KB Flash fits MQTT-SN or CoAP clients. Used in building automation, smart agriculture, and asset tracking, the device aggregates sensor data and forwards it via serial wireless modules. PPS remaps peripheral pins for clean PCB routing when integrating multiple radio modules alongside sensors.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MX150F128B-I/SS – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MX150F128BT-I/SS | PIC32MX150F128B-50I/SS | PIC32MX250F128B-I/SS | PIC32MX130F128B-I/SS | PIC32MX150F128B-I/SP |
|---|---|---|---|---|---|---|
| Package | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP | 28-SPDIP (through-hole) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Speed | 40 MHz | 40 MHz | 50 MHz | 50 MHz | 40 MHz | 40 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| USB Interface | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG |
| Operating Voltage | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| MPN Suffix Distinction | I/SS = Industrial / 28-SSOP | I/SS, T suffix = Tape & Reel | -50I/SS = 50 MHz speed grade | PIC32MX250 family, 50 MHz | PIC32MX130 family, lower peripherals | I/SP = Industrial / 28-SPDIP |
Wichtigste Unterscheidungsmerkmale
- Compact 28-SSOP footprint with full USB 2.0 FS OTG plus 128 KB Flash (vs. PIC32MX130F064B-I/SS)
- 40 MHz MIPS32 M4K core at <0.5 mA/MHz active current (vs. PIC24FJ64GA002-I/SS)
- On-chip CTMU provides 1 ns time measurement and capacitive touch sensing (vs. PIC32MX150F128B-50I/SS)
Designhinweise
PIC32MX150F128B-I/SS operates from 2.3V to 3.6V with separate analog (AVDD/AVSS) and digital (VDD/VSS) supply pins. Place a 0.1uF ceramic decoupling capacitor as close as possible to each VDD/VSS pin pair, and add a 10uF bulk capacitor near the supply entry point. AVDD must be tied to VDD and AVSS to VSS with its own 0.1uF capacitor. According to the Microchip datasheet, low-ESR ceramic decoupling is essential for stable USB and ADC operation. Estimated: at 40 MHz active the core draws roughly 20 mA from 3.3V, so budget for 30 mA worst-case peak load transients.
USB D+/D- traces require 90 ohm differential impedance matching with continuous ground reference, no splits under the trace, and length matching within 2 mm. The 48 MHz USB clock is generated from the primary oscillator through the PLL, so the crystal placement near OSC1/OSC2 with short traces and a guard ring is critical. According to the Microchip PIC32MX1XX/2XX datasheet, use a parallel-cut crystal with 10-22 pF load capacitors. Estimated: trace length under 25 mm keeps losses acceptable; for longer runs use a twisted pair or shield over a grounded guard trace.
Do not connect only one VDD pin when the device is powered - the PIC32MX150F128B-I/SS has two VDD pins (pin 8 and pin 16) and two VSS pins (pin 5 and pin 15). All supply pins must be connected for proper operation. According to the Microchip datasheet, the ICSP programming interface uses PGECx/PGEDx pin pairs (such as PGEC2/PGED2 on pins 9/10) and all VSS/VDD must be powered for reliable in-circuit programming. Failure to connect all supply pins can cause erratic brown-out resets and Flash programming failures that are difficult to diagnose.
Peripheral Pin Select (PPS) allows remapping of most digital peripheral functions to any remappable I/O pin, but remappable input functions are limited. According to the Microchip PIC32MX1XX/2XX family datasheet, PPS inputs must come from RPBx or RPCx pins, and outputs can be mapped to most I/O pins except VDD/VSS. To minimize EMI, place PPS-reassigned pins adjacent to their peripheral partner and avoid crossing clock or USB signals. Estimated: keeping peripheral trace length under 30 mm reduces signal integrity risks in the 28-SSOP package where routing density is limited.
Compliance-Informationen
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - for automotive applications use PIC32MX/MK AEC-Q100 variants. MSL Level 1 per JEDEC J-STD-020 (unlimited floor life). Halogen-free per Microchip packaging declaration.
