PIC32MX795F512LT-80I/TL - 32-Bit 80MHz MCU 512KB | Microchip
Teilenummer: PIC32MX795F512LT-80I/TL ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $10.88 | $10,88 |
| 10 | $9.79 | $97,90 |
| 100 | $8.7 | $870,00 |
| 500 | $7.62 | $3.810,00 |
| 1.000 | $6.53 | $6.530,00 |
PIC32MX795F512LT-80I/TL Übersicht
A microcontroller unit (MCU) is a self-contained computer on a single chip that combines a processor core, program memory, data memory, and configurable peripherals. The PIC32MX795F512L sits in the 32-bit MCU class, above 8-bit and 16-bit devices, and below application processors such as the Cortex-A family. Within the Microchip PIC32MX5/6/7 series, it is the connectivity flagship, adding Ethernet MAC and dual CAN to the MIPS32 M4K pipeline.
Key differentiators include the integrated 10/100 Ethernet MAC with dedicated DMA, USB 2.0 full-speed OTG with an on-chip transceiver, dual CAN 2.0B modules, and 16-channel 10-bit ADC sampling at 1 Msps. The 512 KB Flash and 128 KB SRAM support RTOS-based applications and TCP/IP stacks without external memory.
The M4K core uses a 5-stage pipeline with a single-cycle 32x16 MAC, delivering 1.56 DMIPS/MHz. The peripheral pin select (PPS) feature remaps digital I/O to reduce PCB routing constraints, while the 8-channel DMA controller offloads data movement from the CPU.
Typical applications include industrial Ethernet gateways, CAN-to-Ethernet protocol bridges, motor control with field-oriented control, USB device/host instrumentation, and building automation controllers. The 2.3 V to 3.6 V operating range and -40C to +85C industrial temperature grade suit factory-floor environments.
When designing with this device, place the 0.1 uF decoupling capacitors within 5 mm of each VDD pin and keep the Ethernet differential pairs at 100 ohm impedance. The VTLA package requires a reflow profile matched to its exposed pad for reliable thermal and electrical grounding.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.
Drop-in-Alternativen für PIC32MX795F512LT-80I/TL – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MX795F512LT-80I/TL (gleiche Bauform und Footprint) – abweichend in ADC, USB, Package, Ethernet, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC32MX795F512L-80I/TL
✅ Drop-In✓ Auf Lager
$7.8 / Stück
Datenblatt ansehen →PIC32MX695F512LT-80I/TL
✅ Drop-In✓ Auf Lager
$8.45 / Stück
Datenblatt ansehen →PIC32MX795F512LT-80I/TL Grenzwerte & elektrische Eigenschaften
| Core Processor | MIPS32 M4K 32-bit RISC |
| Maximum CPU Speed | 80 MHz |
| Performance | 1.56 DMIPS/MHz |
| Program Memory (Flash) | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Boot Flash | 12 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Betriebstemperatur | -40C to +85C (industrial) |
| Gehäuse | 124-pin VTLA (TL) 9x9 mm |
| Ethernet | 10/100 Mbit MAC with DMA |
| USB | USB 2.0 Full-Speed OTG with on-chip transceiver |
| CAN | 2x CAN 2.0B controllers |
| ADC | 16-channel 10-bit, 1 Msps |
| Serial Interfaces | 6x UART, 4x SPI, 5x I2C |
| DMA Channels | 8 |
| Timers | 5x 16-bit, 2x 32-bit |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
PIC32MX795F512LT-80I/TL Pin-Konfiguration
| Pin 1 | VDD — Power supply |
| Pin 2 | VSS — Ground |
| Pin 3 | RA0 — Port A bit 0 / analog input |
| Pin 4 | RA1 — Port A bit 1 / analog input |
| Pin 5 | RB0 — Port B bit 0 |
| Pin 6 | RB1 — Port B bit 1 |
| Pin 7 | RB2 — Port B bit 2 |
| Pin 8 | RB3 — Port B bit 3 |
| Pin 9 | RB4 — Port B bit 4 |
| Pin 10 | RB5 — Port B bit 5 |
| Pin 11 | RB6 — Port B bit 6 |
| Pin 12 | RB7 — Port B bit 7 |
| Pin 13 | RB8 — Port B bit 8 |
| Pin 14 | RB9 — Port B bit 9 |
| Pin 15 | RB10 — Port B bit 10 |
| Pin 16 | RB11 — Port B bit 11 |
| Pin 17 | RB12 — Port B bit 12 |
| Pin 18 | RB13 — Port B bit 13 |
| Pin 19 | RB14 — Port B bit 14 |
| Pin 20 | RB15 — Port B bit 15 |
| Pin 21 | RC1 — Port C bit 1 |
| Pin 22 | RC2 — Port C bit 2 |
| Pin 23 | RC3 — Port C bit 3 |
| Pin 24 | RC4 — Port C bit 4 |
| Pin 25 | RC5 — Port C bit 5 |
| Pin 26 | RC6 — Port C bit 6 |
| Pin 27 | RC7 — Port C bit 7 |
| Pin 28 | RC8 — Port C bit 8 |
| Pin 29 | RC9 — Port C bit 9 |
| Pin 30 | VDD — Power supply |
| Pin 31 | VSS — Ground |
| Pin 32 | RD0 — Port D bit 0 |
| Pin 33 | RD1 — Port D bit 1 |
| Pin 34 | RD2 — Port D bit 2 |
| Pin 35 | RD3 — Port D bit 3 |
| Pin 36 | RD4 — Port D bit 4 |
| Pin 37 | RD5 — Port D bit 5 |
| Pin 38 | RD6 — Port D bit 6 |
| Pin 39 | RD7 — Port D bit 7 |
| Pin 40 | RD8 — Port D bit 8 |
| Pin 41 | RD9 — Port D bit 9 |
| Pin 42 | RD10 — Port D bit 10 |
| Pin 43 | RD11 — Port D bit 11 |
| Pin 44 | RD12 — Port D bit 12 |
| Pin 45 | RD13 — Port D bit 13 |
| Pin 46 | RD14 — Port D bit 14 |
| Pin 47 | RD15 — Port D bit 15 |
| Pin 48 | RE0 — Port E bit 0 |
| Pin 49 | RE1 — Port E bit 1 |
| Pin 50 | RE2 — Port E bit 2 |
| Pin 51 | RE3 — Port E bit 3 |
| Pin 52 | RE4 — Port E bit 4 |
| Pin 53 | RE5 — Port E bit 5 |
| Pin 54 | RE6 — Port E bit 6 |
| Pin 55 | RE7 — Port E bit 7 |
| Pin 56 | RF0 — Port F bit 0 |
| Pin 57 | RF1 — Port F bit 1 |
| Pin 58 | RF2 — Port F bit 2 |
| Pin 59 | RF3 — Port F bit 3 |
| Pin 60 | RF4 — Port F bit 4 |
| Pin 61 | RF5 — Port F bit 5 |
| Pin 62 | RF6 — Port F bit 6 |
| Pin 63 | RF7 — Port F bit 7 |
| Pin 64 | RF8 — Port F bit 8 |
| Pin 65 | RF9 — Port F bit 9 |
| Pin 66 | RF10 — Port F bit 10 |
| Pin 67 | RF11 — Port F bit 11 |
| Pin 68 | RF12 — Port F bit 12 |
| Pin 69 | RF13 — Port F bit 13 |
| Pin 70 | RF14 — Port F bit 14 |
| Pin 71 | RF15 — Port F bit 15 |
| Pin 72 | RG0 — Port G bit 0 |
| Pin 73 | RG1 — Port G bit 1 |
| Pin 74 | RG2 — Port G bit 2 |
| Pin 75 | RG3 — Port G bit 3 |
| Pin 76 | RG4 — Port G bit 4 |
| Pin 77 | RG5 — Port G bit 5 |
| Pin 78 | RG6 — Port G bit 6 |
| Pin 79 | RG7 — Port G bit 7 |
| Pin 80 | RG8 — Port G bit 8 |
| Pin 81 | RG9 — Port G bit 9 |
| Pin 82 | RG10 — Port G bit 10 |
| Pin 83 | RG11 — Port G bit 11 |
| Pin 84 | RG12 — Port G bit 12 |
| Pin 85 | RG13 — Port G bit 13 |
| Pin 86 | RG14 — Port G bit 14 |
| Pin 87 | RG15 — Port G bit 15 |
| Pin 88 | VDD — Power supply |
| Pin 89 | VSS — Ground |
| Pin 90 | AVDD — Analog power supply |
| Pin 91 | AVSS — Analog ground |
| Pin 92 | VREF+ — ADC positive reference |
| Pin 93 | VREF- — ADC negative reference |
| Pin 94 | MCLR — Master clear reset (active low) |
| Pin 95 | OSC1 — Primary oscillator input |
| Pin 96 | OSC2 — Primary oscillator output |
| Pin 97 | SOSCI — Secondary oscillator input |
| Pin 98 | SOSCO — Secondary oscillator output |
| Pin 99 | PGEC1 — Programming clock / debug |
| Pin 100 | PGED1 — Programming data / debug |
| Pin 101 | USBDP — USB D+ signal |
| Pin 102 | USBDM — USB D- signal |
| Pin 103 | ETXEN — Ethernet transmit enable |
| Pin 104 | ETXD0 — Ethernet transmit data 0 |
| Pin 105 | ETXD1 — Ethernet transmit data 1 |
| Pin 106 | ERXD0 — Ethernet receive data 0 |
| Pin 107 | ERXD1 — Ethernet receive data 1 |
| Pin 108 | ECRSDV — Ethernet carrier sense / receive data valid |
| Pin 109 | ERXERR — Ethernet receive error |
| Pin 110 | EREFCLK — Ethernet reference clock |
| Pin 111 | EMDC — Ethernet management data clock |
| Pin 112 | EMDIO — Ethernet management data I/O |
| Pin 113 | C1TX — CAN1 transmit |
| Pin 114 | C1RX — CAN1 receive |
| Pin 115 | C2TX — CAN2 transmit |
| Pin 116 | C2RX — CAN2 receive |
| Pin 117 | U1TX — UART1 transmit |
| Pin 118 | U1RX — UART1 receive |
| Pin 119 | U2TX — UART2 transmit |
| Pin 120 | U2RX — UART2 receive |
| Pin 121 | SCL1 — I2C1 clock |
| Pin 122 | SDA1 — I2C1 data |
| Pin 123 | SCK1 — SPI1 clock |
| Pin 124 | SDI1 — SPI1 data input |
Typische Anwendungen
PIC32MX795F512LT-80I/TL ist geeignet für 6 Anwendungs: Industrial Ethernet Gateway, CAN-to-Ethernet Protocol Bridge, Motor Control with Field-Oriented Control, USB Device and Host Instrumentation, Building Automation Controller, Data Acquisition and Signal Processing.
Industrial Ethernet Gateway
The PIC32MX795F512LT-80I/TL fits industrial Ethernet gateways because its integrated 10/100 Mbit MAC with dedicated DMA handles packet traffic without CPU intervention, while 512 KB Flash and 128 KB SRAM accommodate a full TCP/IP stack and Modbus TCP server. The 80 MHz M4K core at 1.56 DMIPS/MHz processes protocol translation between Ethernet and serial fieldbus links. In a typical design, the MAC connects to an external PHY through the RMII interface, and the dual CAN controllers bridge to CANopen devices. The trade-off versus a Cortex-M7 gateway is lower raw throughput, but the on-chip Ethernet MAC eliminates an external controller and reduces BOM cost.
Empfohlen
CAN-to-Ethernet Protocol Bridge
The PIC32MX795F512LT-80I/TL is ideal for CAN-to-Ethernet bridges because it integrates two CAN 2.0B controllers alongside the 10/100 Ethernet MAC, allowing simultaneous dual-bus CAN traffic and Ethernet uplink on one chip. The 8-channel DMA moves CAN and Ethernet frames without CPU load, and 128 KB SRAM buffers burst traffic during protocol conversion. In a bridge design, one CAN module connects to a vehicle bus and the other to a machine bus, while the Ethernet MAC forwards aggregated data to a supervisory system. The 2.3 V to 3.6 V supply and -40C to +85C rating suit factory-floor and automotive-adjacent environments.
Empfohlen
Motor Control with Field-Oriented Control
The PIC32MX795F512LT-80I/TL supports motor control applications through its 16-channel 10-bit ADC sampling at 1 Msps, which captures three-phase current feedback for field-oriented control loops. The 80 MHz M4K core with single-cycle 32x16 MAC executes Park and Clarke transforms in real time, while the five 16-bit timers generate complementary PWM with dead-time insertion. In a typical servo drive, the ADC samples shunt currents synchronized to PWM, and the DMA transfers results to RAM without CPU overhead. The trade-off versus a dedicated motor-control MCU is the absence of on-chip op-amps, but the integrated Ethernet enables remote drive monitoring.
Empfohlen
USB Device and Host Instrumentation
The PIC32MX795F512LT-80I/TL suits USB instrumentation because it integrates a USB 2.0 full-speed OTG controller with an on-chip transceiver, eliminating an external USB PHY. The 512 KB Flash stores firmware and data-logging buffers, while 128 KB SRAM supports USB endpoints and a command parser. In a data-acquisition instrument, the device enumerates as a CDC or HID device and streams ADC samples to a host PC. The 16-channel 10-bit ADC and 8-channel DMA allow continuous sampling without CPU intervention. The trade-off versus a dedicated USB MCU is higher power, but the integrated Ethernet and CAN add connectivity options.
Empfohlen
Building Automation Controller
The PIC32MX795F512LT-80I/TL fits building automation controllers because it combines Ethernet, dual CAN, and six UART channels for BACnet/IP, CANopen, and Modbus RTU connectivity on a single chip. The 512 KB Flash holds a building management stack, and 128 KB SRAM buffers sensor and actuator data across multiple buses. In a typical HVAC controller, the Ethernet MAC connects to the building backbone while UARTs interface to zone sensors and CAN links to VAV boxes. The -40C to +85C industrial temperature range and 2.3 V to 3.6 V supply support reliable operation in mechanical rooms. The trade-off is higher cost than an 8-bit controller, justified by integrated networking.
Empfohlen
Data Acquisition and Signal Processing
The PIC32MX795F512LT-80I/TL supports data acquisition because its 16-channel 10-bit ADC samples at 1 Msps and the 8-channel DMA streams results to SRAM without CPU intervention, enabling continuous multi-channel logging. The 80 MHz M4K core with single-cycle MAC executes FIR and IIR filters in real time, and 512 KB Flash stores calibration tables and firmware. In a typical DAQ node, the ADC digitizes sensor signals, DMA transfers blocks to RAM, and the core applies filtering before transmitting over Ethernet or USB. The trade-off versus a dedicated DSP is lower MIPS, but the integrated connectivity and memory reduce system cost.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MX795F512LT-80I/TL – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MX795F512L-80I/TL | PIC32MX795F512L-80V/PF | PIC32MX695F512LT-80I/TL | PIC32MX775F512LT-80I/PT | PIC32MX795F512LT-80I/BG |
|---|---|---|---|---|---|---|
| Package | 124-pin VTLA (TL) | 124-pin VTLA (TL) - same | 100-pin TQFP (PF) | 124-pin VTLA (TL) - same | 100-pin TQFP (PT) | 124-pin XBGA (BG) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 Mbit with DMA | 10/100 Mbit with DMA | 10/100 Mbit with DMA | None | 10/100 Mbit with DMA | 10/100 Mbit with DMA |
| CAN Controllers | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B | 2x CAN 2.0B |
| USB | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +105C | -40C to +85C | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel | Tray | Tray | Tape & Reel | Tray | Tape & Reel |
Wichtigste Unterscheidungsmerkmale
- Integrated 10/100 Ethernet MAC with DMA (vs. PIC32MX695F512LT-80I/TL)
- Tape-and-reel packaging for automated assembly (vs. PIC32MX795F512L-80I/TL)
- Dual CAN 2.0B plus Ethernet on one die (vs. PIC32MX775F512LT-80I/PT)
Designhinweise
Decouple every VDD pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, plus a 10 uF bulk capacitor near the package. The PIC32MX795F512LT-80I/TL draws transient current during 80 MHz operation; inadequate decoupling causes clock jitter and Ethernet packet errors. Use a solid ground plane under the device and connect the exposed pad to ground with multiple vias.
Route the Ethernet RMII signals (ETXD0/1, ERXD0/1, EREFCLK) as 50 ohm controlled-impedance traces and keep them matched in length within 5 mm. Place the external PHY within 25 mm of the MCU to minimize skew. Keep the USB D+/D- pair at 90 ohm differential impedance and avoid stubs. The 124-pin VTLA exposed pad must be soldered with adequate via stitching for thermal relief.
Do not exceed the 3.6 V maximum supply voltage; the PIC32MX795F512LT-80I/TL is not 5 V tolerant on all pins. Verify the VREF+ and VREF- connections for the ADC, as floating references cause inaccurate conversions. Ensure the MCLR pin has a 10 kohm pull-up and 0.1 uF capacitor to prevent spurious resets. Confirm the oscillator circuit matches the datasheet's recommended load capacitors for the selected crystal.
Compliance-Informationen
RoHS compliant per Microchip product page. Not AEC-Q100 qualified; industrial temperature grade only.
