PIC32MZ2048EFG064T-I/MR - 200MHz 32-bit MCU 2MB Flash 64-QFN | Microchip
Teilenummer: PIC32MZ2048EFG064T-I/MR ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $14.2 | $14,20 |
| 10 | $12.78 | $127,80 |
| 100 | $11.36 | $1.136,00 |
| 500 | $10.1 | $5.050,00 |
| 1.000 | $8.95 | $8.950,00 |
PIC32MZ2048EFG064T-I/MR Übersicht
Key features include 2 MB of Live-Update Flash memory, 512 KB of SRAM, an integrated Floating Point Unit (FPU), high-speed USB 2.0 (HS USB), 10/100 Mbps Ethernet MAC, 4x SPI, 4x I2C, 6x UART, and a 12-bit ADC with up to 24 analog inputs. The device operates from 2.3V to 3.6V and includes 8 DMA channels for efficient peripheral data movement.
This device belongs to the PIC32MZ EF Family of microcontrollers, which are high-performance MIPS-based MCUs designed for industrial, automotive, IoT, graphics (HMI), and motor control applications. The 200 MHz core, paired with the FPU, delivers up to 1.65 DMIPS/MHz and supports DSP instructions for audio processing. The PIC32 ecosystem provides an extensive library of application notes and reference designs.
Typical applications include industrial IoT gateways with Ethernet connectivity, automotive HMI displays, motor control inverters, audio processing systems, and graphics-based HMIs. The exposed thermal pad on the QFN-64 package enables improved thermal dissipation in high-utilization designs, while the integrated Ethernet MAC reduces BOM cost for connected embedded products.
When designing with this part, ensure the QFN-64 land pattern includes thermal vias under the exposed pad to maintain junction temperature within specifications. The 2 MB Live-Update Flash supports dual-image firmware updates, allowing safe OTA deployments where one partition is the active firmware and the other receives new code.
This page synthesizes distributor pricing, drop-in alternatives including the same-family PIC32MZ2048EFG064T-I/PT (TQFP package), and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für PIC32MZ2048EFG064T-I/MR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MZ2048EFG064T-I/MR (gleiche Bauform und Footprint) – abweichend in ADC, CAN, Core Architecture, Package, USB.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernPIC32MZ2048EFG064T-I/MR Grenzwerte & elektrische Eigenschaften
| Core Architecture | MIPS32 M-Class (PIC32MZ) |
| Core Speed (Max) | 200 MHz |
| Program Flash Memory | 2 MB (2M x 8) |
| SRAM | 512 KB |
| Floating Point Unit | Yes (hardware FPU) |
| Operating Voltage | 2.3 V to 3.6 V |
| ADC | 12-bit, up to 24 channels |
| DMA Channels | 8 |
| USB | USB 2.0 High-Speed (Host/Device/OTG) |
| Ethernet MAC | 10/100 Mbps RMII/MII |
| SPI | 4x |
| I2C | 4x |
| UART | 6x |
| CAN | None (this 'EFG' variant) |
| Cryptography | None (this 'EFG' variant) |
| Betriebstemperatur | -40C to +85C (Industrial) |
| Gehäuse | 64-lead QFN (MR) with exposed pad |
| Montageart | Surface Mount |
| Pin/Package Code | MR |
| MSL-Level | 1 |
PIC32MZ2048EFG064T-I/MR Pin-Konfiguration
| Pin 1 | AN0/CVREF+/PMA6/RPB0 — Analog input 0 / CVREF+ / PMA6 / GPIO RB0 |
| Pin 2 | AN1/CVREF-/PMA7/RPB1 — Analog input 1 / CVREF- / PMA7 / GPIO RB1 |
| Pin 3 | AN2/PGED3/RPB2 — Analog input 2 / ICSP data / GPIO RB2 |
| Pin 4 | AN3/PGEC3/RPB3 — Analog input 3 / ICSP clock / GPIO RB3 |
| Pin 5 | AN4/RPB4 — Analog input 4 / GPIO RB4 |
| Pin 6 | AN5/RPB5 — Analog input 5 / GPIO RB5 |
| Pin 7 | AVDD — Analog supply voltage |
| Pin 8 | AVSS — Analog ground |
| Pin 9 | AN6/RPC0 — Analog input 6 / GPIO RC0 |
| Pin 10 | AN7/RPC1 — Analog input 7 / GPIO RC1 |
| Pin 11 | AN8/RPC2 — Analog input 8 / GPIO RC2 |
| Pin 12 | AN9/RPC3 — Analog input 9 / GPIO RC3 |
| Pin 13 | AN10/RPC4 — Analog input 10 / GPIO RC4 |
| Pin 14 | AN11/RPC5 — Analog input 11 / GPIO RC5 |
| Pin 15 | VREF-/AN12/RPC6 — VREF- / Analog input 12 / GPIO RC6 |
| Pin 16 | VREF+/AN13/RPC7 — VREF+ / Analog input 13 / GPIO RC7 |
| Pin 17 | AN14/RPC8 — Analog input 14 / GPIO RC8 |
| Pin 18 | AN15/RPC9 — Analog input 15 / GPIO RC9 |
| Pin 19 | AVDD — Analog supply voltage |
| Pin 20 | AVSS — Analog ground |
| Pin 21 | VDD — Digital supply voltage |
| Pin 22 | VSS — Digital ground |
| Pin 23 | RPD0 — GPIO RD0 |
| Pin 24 | RPD1 — GPIO RD1 |
| Pin 25 | RPD2/RX1 — GPIO RD2 / UART1 RX |
| Pin 26 | RPD3/TX1 — GPIO RD3 / UART1 TX |
| Pin 27 | RPD4/RX2 — GPIO RD4 / UART2 RX |
| Pin 28 | RPD5/TX2 — GPIO RD5 / UART2 TX |
| Pin 29 | RPD6 — GPIO RD6 |
| Pin 30 | RPD7 — GPIO RD7 |
| Pin 31 | RPD8 — GPIO RD8 |
| Pin 32 | RPD9 — GPIO RD9 |
| Pin 33 | RPD10 — GPIO RD10 |
| Pin 34 | RPD11 — GPIO RD11 |
| Pin 35 | RPD12 — GPIO RD12 |
| Pin 36 | RPD13 — GPIO RD13 |
| Pin 37 | RPD14 — GPIO RD14 |
| Pin 38 | RPD15 — GPIO RD15 |
| Pin 39 | VDD — Digital supply voltage |
| Pin 40 | VSS — Digital ground |
| Pin 41 | ERX1/AETX1/RPE0 — Ethernet RX1 / GPIO RE0 |
| Pin 42 | ERX0/AETX0/RPE1 — Ethernet RX0 / GPIO RE1 |
| Pin 43 | ECRS/AECRS/RPE2 — Ethernet CRS / GPIO RE2 |
| Pin 44 | ETX1/AERX1/RPE3 — Ethernet TX1 / GPIO RE3 |
| Pin 45 | ETX0/AERX0/RPE4 — Ethernet TX0 / GPIO RE4 |
| Pin 46 | ECOL/AECOL/RPE5 — Ethernet collision / GPIO RE5 |
| Pin 47 | ERXER/AERXER/RPE6 — Ethernet RX error / GPIO RE6 |
| Pin 48 | ERXCLK/AECRS/RPE7 — Ethernet RX clock / GPIO RE7 |
| Pin 49 | AERXCLK/RPF0 — Alt Ethernet RX clock / GPIO RF0 |
| Pin 50 | AERXDV/RPF1 — Alt Ethernet RX DV / GPIO RF1 |
| Pin 51 | AERXERR/RPG6 — Alt Ethernet RX error / GPIO RG6 |
| Pin 52 | AETXEN/RPG7 — Alt Ethernet TX EN / GPIO RG7 |
| Pin 53 | AETXCLK/RPG8 — Alt Ethernet TX clock / GPIO RG8 |
| Pin 54 | VSS — Digital ground |
| Pin 55 | OC1/RD0 — Output compare 1 / GPIO RD0 (alternate) |
| Pin 56 | OC2/RD1 — Output compare 2 / GPIO RD1 (alternate) |
| Pin 57 | OC3/RD2 — Output compare 3 / GPIO RD2 (alternate) |
| Pin 58 | OC4/RD3 — Output compare 4 / GPIO RD3 (alternate) |
| Pin 59 | VBUS — USB VBUS detect |
| Pin 60 | VUSB3V3 — USB 3.3V regulator input |
| Pin 61 | D- — USB D- |
| Pin 62 | D+ — USB D+ |
| Pin 63 | VDD — Digital supply voltage |
| Pin 64 | VSS — Digital ground |
Typische Anwendungen
PIC32MZ2048EFG064T-I/MR ist geeignet für 6 Anwendungs: Industrial IoT Gateway with Ethernet, Automotive HMI Display Controller, BLDC Motor Control Inverter, Audio Processing and Effects Pedal, Smart Home IoT Sensor Hub, Industrial Touchscreen HMI Panel.
Industrial IoT Gateway with Ethernet
An industrial IoT gateway requires deterministic Ethernet connectivity plus sufficient Flash for MQTT/TLS stacks. The PIC32MZ2048EFG064T-I/MR integrates a 10/100 Mbps Ethernet MAC with on-chip PHY interface support, 2 MB Flash for TLS libraries and application firmware, and 512 KB SRAM for network buffers and TCP/IP stacks. At 200 MHz with the hardware FPU, it can run encryption, JSON parsing, and sensor aggregation in real time without external memory. The 64-QFN MR footprint with exposed pad simplifies PCB thermal design inside IP-rated enclosures, while the -40C to +85C industrial temperature range supports factory-floor operation.
Empfohlen
Automotive HMI Display Controller
The PIC32MZ2048EFG064T-I/MR serves as a display controller in automotive HMI clusters and infotainment head units. Its 200 MHz MIPS core with hardware FPU accelerates 2D graphics rendering, while the 2 MB Flash holds instrument cluster graphics assets and the 512 KB SRAM doubles as a framebuffer for small displays. The HS USB 2.0 interface supports phone-mirroring or CarPlay-style connections. Note: this EFG variant does not include CAN, so it pairs with a dedicated CAN-FD transceiver for vehicle network bridging. The 64-QFN exposed pad manages thermal load in enclosed dashboard modules.
Empfohlen
BLDC Motor Control Inverter
Brushless DC motor control drives benefit from the PIC32MZ2048EFG064T-I/MR's 200 MHz throughput and 12-bit ADC sampling rate for field-oriented control (FOC) algorithms. The 8 DMA channels can autonomously stream ADC samples to SRAM without CPU intervention, freeing MIPS for the FOC loop and PWM duty updates. The PIC32MZ EF family's PWM and quadrature encoder interface blocks generate motor timing with sub-microsecond resolution. The exposed thermal pad of the QFN-64 MR package handles sustained computational load during high-duty-cycle operation in industrial drives.
Empfohlen
Audio Processing and Effects Pedal
Audio effects pedals and music equipment use the PIC32MZ2048EFG064T-I/MR for real-time DSP at audio sample rates. The 200 MHz MIPS core with hardware FPU and DSP instructions implements reverb, delay, equalization, and pitch shifting in real time with low latency. The 12-bit ADC and on-chip PWM generators provide 16-bit audio quality through oversampling, while the 512 KB SRAM stores audio buffers and coefficient tables. The HS USB can deliver USB Audio Class device streaming for digital pedal board connectivity, and the 2 MB Flash holds presets, firmware, and a small DSP library.
Empfohlen
Smart Home IoT Sensor Hub
Smart home IoT hubs require a low-power microcontroller with multiple peripheral interfaces for sensors and wireless modules. The PIC32MZ2048EFG064T-I/MR's 4x SPI and 4x I2C buses support simultaneous Zigbee, Thread, BLE, and sensor connections, while the 6 UARTs enable debug, GPS, and cellular module integration. The 2 MB Flash accommodates OTA firmware with full TLS stack plus device-cloud protocol (MQTT/CoAP). The QFN-64 MR package suits compact wall-mount enclosures, and the exposed pad manages thermal dissipation during continuous radio coordination tasks.
Empfohlen
Industrial Touchscreen HMI Panel
Industrial touchscreen HMIs integrate display, touch, and connectivity. The PIC32MZ2048EFG064T-I/MR drives a 4-7 inch LCD via parallel or SPI interface, processes touch coordinates through the ADC, and runs the menu/state-machine logic. The 200 MHz core handles full graphical user interfaces, while the Ethernet MAC and HS USB provide factory-network connectivity for SCADA integration. The 2 MB Flash stores multilingual UI assets and 512 KB SRAM serves as a framebuffer. The 64-QFN exposed pad is critical for fanless panels in sealed industrial enclosures where thermal dissipation is constrained.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MZ2048EFG064T-I/MR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MZ2048EFG064T-I/PT |
|---|---|---|
| Package | 64-QFN (MR) 9x9 mm with EP | 64-TQFP (PT) 10x10 mm |
| Brand | Microchip Technology | Microchip Technology |
| Core / Max Speed | MIPS32 M-class / 200 MHz | MIPS32 M-class / 200 MHz |
| Program Flash | 2 MB | 2 MB |
| SRAM | 512 KB | 512 KB |
| FPU / DSP | Yes / Yes | Yes / Yes |
| HS USB / Ethernet | Yes / Yes (10/100) | Yes / Yes (10/100) |
| CAN / Crypto | No / No (EFG variant) | No / No (EFG variant) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
Wichtigste Unterscheidungsmerkmale
- QFN package with exposed thermal pad (vs. PIC32MZ2048EFG064T-I/PT)
- 2 MB Flash with Live-Update dual partition (vs. PIC32MX795F512L (512 KB Flash))
- Integrated HS USB and Ethernet MAC (vs. Discrete USB and Ethernet solutions on lower-end MCUs)
Designhinweise
The 64-lead QFN (MR) package requires a thermal pad land pattern with an array of thermal vias connecting to the internal ground plane. Estimated: with 4x4 thermal vias of 0.3 mm drill and 1 oz copper fill, thermal resistance from junction to ambient drops by approximately 30-40 percent versus a non-via implementation. Solder the exposed pad for both electrical ground and thermal performance.
Place 100 nF decoupling capacitors as close as possible to each VDD/VSS pin pair. Add a bulk 4.7 uF ceramic and a 10 uF tantalum or polymer cap on the main supply rail near the IC. The PIC32MZ EF family has multiple VDD/VSS pairs (digital and analog); each AVDD/AVSS pin needs its own 100 nF analog-domain decoupling. Estimated: a clean power supply reduces ADC noise floor by approximately 10 dB relative to a poorly decoupled layout.
A common mistake is treating 'EFG' variants as having CAN or Crypto support - they do NOT. Verify the device family code before PCB design. Also, the Live-Update Flash requires firmware to manage the dual-partition boot; if the bootloader is missing or corrupted, the device may appear bricked after an OTA update. Always implement a golden-image fallback in the boot ROM-protected region.
For the 10/100 Ethernet MAC, use 50-ohm controlled-impedance traces on the RMII/MII signals and place the PHY close to the MCU. The HS USB D+/D- traces must be 90-ohm differential, with matched length to within 150 mils. Estimated: improper USB routing causes enumeration failures and reduced HS USB throughput from 480 Mbps to FS USB 12 Mbps fallback rates.
Compliance-Informationen
RoHS compliant per Microchip product page. Industrial temperature grade -40C to +85C. AEC-Q100 qualification not standard for this variant; automotive designers should select Q-grade PIC32MZ variants.
