R5F10BGCLFB#X5 - 16-Bit 32MHz RL78/F13 MCU | Renesas
Teilenummer: R5F10BGCLFB#X5 ✓ AktivR5F10BGCLFB#X5 Übersicht
An RL78 microcontroller is a compact reduced-instruction-set microcontroller architecture commonly used for embedded control. The RL78 family combines a 16-bit core, flash-based program memory, low-power operating modes, and automotive peripherals in an integrated device. Within the broader semiconductor hierarchy, an MCU such as the R5F10BGCLFB#X5 belongs to the embedded-microcontroller and automotive-control categories rather than to general-purpose computing.
Key family-level characteristics include operation at up to 32 MHz, 16-bit instruction processing, flash-based program storage, and integrated CAN and LIN communication interfaces. The RL78/F13 family is also described as offering low consumption current, RAM ECC, a PLL lock function, port-output-state monitoring, and stack-related safety functions. Exact flash, RAM, peripheral-channel, voltage, and temperature limits for this ordering code must be confirmed in the manufacturer datasheet before design release.
The 48-pin LQFP package provides a conventional leaded automotive-control footprint with exposed external pins for general-purpose I/O and communications. The microcontroller's low-power focus enables duty-cycled operation in body, comfort, motor-control, and interface modules, while its 32 MHz maximum clock rate supports responsive protocol handling and control-loop computation. The CAN and LIN peripherals are particularly relevant to distributed automotive electrical architectures.
Typical uses include CAN and LIN gateway modules, automotive switch controllers, sensor-hub controllers, actuator controllers, body-control submodules, and compact instrument-cluster support circuits. The same device can be used where low standby consumption helps reduce quiescent-system energy while wake-up behavior and communication responsiveness remain important.
Design work should begin with the exact Renesas part-number ordering guide and package drawing. Confirm the power-supply range, operating-temperature grade, pin multiplexing, peripheral availability, flash and RAM capacity, clock limits, and automotive qualification requirements. PCB layouts should preserve the recommended decoupling, exposed-pad or thermal strategy, and all high-speed communication-routing guidance documented for the selected package.
This page combines the exact ordering code, verified manufacturer and distributor links, package-specific sourcing information, application guidance, and conservative drop-in comparison criteria for engineers evaluating an RL78/F13 automotive MCU replacement.
Drop-in-Alternativen für R5F10BGCLFB#X5 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit R5F10BGCLFB#X5 (gleiche Bauform und Footprint) – abweichend in PLL Lock Function, Package, Product Type.
R5F10BGFLFB#X5
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
R5F10BGGLFB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
R5F10BGCLFB#X5 Grenzwerte & elektrische Eigenschaften
| Product Type | 16-bit automotive microcontroller |
| Series | RL78/F13 |
| Architecture | RL78 16-bit reduced-instruction-set core |
| Maximale Taktfrequenz | 32 MHz |
| Program Memory Type | Flash |
| Family Flash-Memory Range | 16 KB to 128 KB |
| Gehäuse | 48-pin LQFP |
| Pin-Anzahl | 48 pins |
| Montageart | Surface mount |
| Communication Interfaces | CAN and LIN |
| Application Classification | Automotive applications |
| RAM ECC Support | Supported by the RL78/F13 family |
| PLL Lock Function | Supported by the RL78/F13 family |
| Port Output-State Monitoring | Supported by the RL78/F13 family |
| Low-Consumption Feature | Low-consumption-current operation |
R5F10BGCLFB#X5 48-pin lqfp Pinbelegungsleitfaden
Pinbelegung für R5F10BGCLFB#X5 (48-pin lqfp-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für R5F10BGCLFB#X5.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
R5F10BGCLFB#X5 ist geeignet für 6 Anwendungs: Automotive CAN Gateway, LIN Sensor Node, Body Control Module, Actuator Controller, Automotive Switch Controller, Vehicle Diagnostic Interface.
Automotive CAN Gateway
The R5F10BGCLFB#X5 fits an automotive CAN gateway because the RL78/F13 family combines a 16-bit core operating up to 32 MHz with an integrated CAN interface. The MCU can translate or route traffic between vehicle networks while handling diagnostic messages and local control logic. Its 48-pin LQFP package also provides enough external connections for CAN, power, clock, debug, and status signals. Low-consumption characteristics are valuable in parked or partially active vehicles. Before schematic release, verify the exact CAN channel count, pin multiplexing, transceiver interface, standby current, and automotive qualification in the manufacturer datasheet.
Empfohlen
LIN Sensor Node
A LIN-connected sensor node benefits from the R5F10BGCLFB#X5 because its RL78/F13 family provides a dedicated LIN interface and low-consumption-current design. The 16-bit processor and 32 MHz maximum clock frequency provide adequate timing margin for sensor acquisition, diagnostic handling, and communication scheduling. The 48-pin LQFP package simplifies access to external sensors, switches, and status indicators without requiring an extremely dense footprint. Confirm the exact LIN and timer resources, I/O map, wake-up sources, and supply-voltage range for this ordering code before assigning production duties.
Empfohlen
Body Control Module
The R5F10BGCLFB#X5 is appropriate for a distributed body-control module where low standby consumption, deterministic embedded control, and network connectivity are required. Its 16-bit RL78 architecture supports switch-state processing and timer-based control at up to 32 MHz, while CAN and LIN allow integration with vehicle communication networks. Family-level RAM ECC, PLL lock indication, and port-output-state monitoring add useful diagnostic capability. Designers should confirm the exact GPIO count, memory configuration, watchdog behavior, temperature grade, and pin assignment before finalizing the body-module schematic and PCB.
Empfohlen
Actuator Controller
The R5F10BGCLFB#X5 can serve as the controller for a small automotive actuator when the design requires a 16-bit core, up to 32 MHz processing, and low-power operation. The RL78/F13 feature set supports responsive control-loop execution, network communication, and safety-oriented monitoring such as RAM ECC and port-output-state monitoring. A 48-pin LQFP package provides access to motor or solenoid drive controls, position inputs, diagnostics, and communication interfaces. Validate the exact PWM and timer resources, pin-drive ratings, watchdog architecture, and automotive qualification before using the device in a safety-relevant actuator path.
Empfohlen
Automotive Switch Controller
For an electronic switch or relay-control module, the R5F10BGCLFB#X5 provides a 16-bit RL78 core with a 32 MHz maximum clock rate and the low-current behavior associated with the RL78/F13 family. Integrated CAN and LIN connectivity supports centralized vehicle diagnostics and configuration. The 48-pin LQFP package offers a practical balance of control I/O and communications in a surface-mount automotive design. Check drive-current capabilities, input thresholds, protection requirements, standby behavior, and exact pin multiplexing in the datasheet because those details determine the robustness of the switch interface.
Empfohlen
Vehicle Diagnostic Interface
The R5F10BGCLFB#X5 is suited to a compact vehicle diagnostic interface because RL78/F13 devices combine a 16-bit, 32 MHz-class core with CAN and LIN communication peripherals. The controller can process network messages, manage diagnostic requests, and report module status while operating in low-power states between vehicle events. Family features such as RAM ECC, PLL lock monitoring, and port-output-state monitoring support dependable diagnostic behavior. Before implementation, confirm the exact communication-channel count, watchdog coverage, oscillator requirements, reset behavior, and automotive qualification for the selected ordering code.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für R5F10BGCLFB#X5 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | R5F10BGFLFB#X5 | R5F10BGGLFB |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 48-pin LQFP | 48-pin LQFP | 48-pin PQFP |
| Series | RL78/F13 | RL78/F13 | RL78/F13 |
| Core Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
| Maximum Clock Frequency | 32 MHz | 32 MHz family maximum | 32 MHz |
| Program Memory | Flash; exact capacity requires ordering-table confirmation | Flash; exact capacity requires ordering-table confirmation | Flash; exact capacity requires ordering-table confirmation |
| Communication Interfaces | CAN and LIN | CAN and LIN | CAN and LIN |
| RAM ECC | Supported by RL78/F13 family | Supported by RL78/F13 family | Supported by RL78/F13 family |
| PLL Lock Function | Supported by RL78/F13 family | Supported by RL78/F13 family | Supported by RL78/F13 family |
| Port Output-State Monitoring | Supported by RL78/F13 family | Supported by RL78/F13 family | Supported by RL78/F13 family |
Wichtigste Unterscheidungsmerkmale
- Automotive network integration in a compact 48-pin controller (vs. R5F10BGGLFB)
- Low-consumption RL78/F13 architecture for duty-cycled vehicle modules (vs. R5F10BGFLFB#X5)
- 32 MHz processing with integrated automotive communications (vs. R5F10BGGLFB)
Designhinweise
Place the decoupling network at the R5F10BGCLFB#X5 power pins and route each connection with the shortest practical path. The 48-pin LQFP footprint provides ample perimeter escape, but automotive CAN and LIN traces still require careful treatment. Follow the manufacturer's layout and grounding guidance, preserve continuous return paths beneath communications routes, and avoid placing high-current switching nodes near communication or oscillator inputs.
Power sequencing and voltage tolerance must be validated against the exact ordering code before connecting external modules. Check every supply rail against the manufacturer's electrical-characteristics table, including operating range, startup behavior, and I/O limits during reset. Add the required local bypass capacitors and use an automotive-rated supply arrangement where the system requires controlled startup or load-dump protection.
CAN and LIN interfaces should be routed according to the applicable transceiver and vehicle-network implementation requirements. Keep clock and sensitive input paths away from switch-node currents, preserve short ground returns, and observe the datasheet's oscillator layout guidance. If the MCU interfaces with an external CAN transceiver, verify logic levels, standby isolation, bus-strain behavior, and pin multiplexing before enabling the communications peripheral.
Do not treat all RL78/F13 suffixes as interchangeable. The C, F, G, H, L, and other ordering segments can identify differences in package, grade, qualification, or other configuration attributes. Compare the official ordering table and package drawings before making a replacement. Also avoid populating software for one order on another without checking interrupt vectors, peripheral options, memory size, clock limits, and startup behavior.
Evaluate junction temperature from the actual automotive ambient, internal dissipation, and PCB copper rather than relying on package size alone. The exact operating-temperature grade and electrical current limits must be confirmed for the ordering code. Preserve the recommended land pattern and copper distribution around the LQFP leads, and use thermal analysis when nearby regulators, transceivers, or power stages raise the board's local temperature.
Compliance-Informationen
The product is identified for automotive applications, but the exact qualification grade and environmental declarations require confirmation from the Renesas product documentation.