RTAX4000SL-CG1272B - 4M-Gate Rad-Tolerant FPGA CCGA1272 | Microchip
Teilenummer: RTAX4000SL-CG1272B ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
RTAX4000SL-CG1272B Übersicht
A radiation-tolerant FPGA is a programmable logic device qualified for space-flight environments, where high-energy particle strikes can cause single-event effects (SEE) and total ionizing dose (TID) degradation. The RTAX-SL family sits within Microchip's space portfolio as the successor to the RTAX-S family, offering higher performance and lower power while retaining the one-time-programmable (OTP) antifuse architecture that makes these devices live-at-power-up and inherently resistant to configuration upsets.
Key features of the RTAX4000SL-CG1272B include true single-chip operation (no external configuration PROM required), live-at-power-up behavior that eliminates configuration-time vulnerability, low static power consumption from the antifuse fabric, and the large 40320-cell logic capacity suited to complex on-board data processing. The CCGA ceramic package with solder columns provides the mechanical robustness and thermal reliability required for launch vibration and space thermal cycling.
Technically, the RTAX-SL fabric is built from VersaTile logic elements on a 0.15 um CMOS process. The SL variant improves speed and lowers power versus the original RTAX-S generation. Because the fabric is OTP, configuration data cannot be corrupted by radiation-induced upsets, a fundamental reliability advantage over SRAM-based FPGAs in orbit. Designers implement designs using Libero SoC and prototype on footprint-compatible ProASIC3/axcelerator-based flow as described in Microchip's prototyping application note.
Typical applications include satellite payload data processing, spacecraft bus controllers, telemetry and telecommand interfaces, sensor front-end signal processing, and reconfigurable computing modules on Earth-observation and science missions.
A key design consideration is lead time: space-grade RTAX devices are built to order with long manufacturing cycles, so early order placement and a prototyping migration strategy (adaptor board plus EDIF netlist conversion) are strongly recommended.
This page synthesizes verified distributor data, drop-in same-package alternatives, pricing tiers, and engineering design guidance not found in a single manufacturer datasheet, giving buyers and space-systems engineers a one-stop reference for the RTAX4000SL-CG1272B.
Drop-in-Alternativen für RTAX4000SL-CG1272B – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit RTAX4000SL-CG1272B (gleiche Bauform und Footprint) – abweichend in Package, Configuration, Family, Radiation Tolerance, Speed Grade.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
RTAX4000SL-1CG1272B
✅ Drop-In✓ Auf Lager
$6980 / Stück
Datenblatt ansehen →RTAX4000SL-CGS1272B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
RTAX4000SL-1CGS1272B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
RTAX4000S-CG1272B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
RTAX4000SL-LG1272V
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →RTAX4000SL-CG1272B Grenzwerte & elektrische Eigenschaften
| Family | RTAX-SL |
| Equivalent System Gates | 4,000,000 |
| Logic Cells (CLBs) | 40320 |
| Process Technology | 0.15 um |
| Core Supply Voltage | 1.5 V |
| Gehäuse | 1272-pin CCGA (Ceramic Column Grid Array) |
| Programming Type | One-Time Programmable (antifuse) |
| Radiation Tolerance | Radiation-tolerant (space-flight qualified family) |
| Configuration | Single-chip, live-at-power-up |
| Montageart | Surface Mount |
| Speed Grade | Standard (non -1 grade) |
RTAX4000SL-CG1272B 1272-pin ccga (ceramic column grid array) Pinbelegungsleitfaden
Pinbelegung für RTAX4000SL-CG1272B (1272-pin ccga (ceramic column grid array)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für RTAX4000SL-CG1272B.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
RTAX4000SL-CG1272B ist geeignet für 6 Anwendungs: Satellite Payload Data Processing, Spacecraft Bus Control and Telemetry, Instrument Front-End Signal Processing, Launch Vehicle Avionics, Reconfigurable Computing Modules for Space, Deep Space and Science Mission Logic.
Satellite Payload Data Processing
The RTAX4000SL-CG1272B is a natural fit for payload data-processing chains on Earth-observation and science satellites. Its 4,000,000 equivalent gates and 40320 logic cells provide headroom for framing, lossless compression, CRC/LDPC error correction, and payload-controller logic in a single device, eliminating the multi-chip glue logic that adds mass and failure modes. Because the antifuse fabric is one-time-programmable, its configuration cannot be corrupted by single-event upsets, so no scrubber or external configuration PROM is needed - a direct mass and reliability saving on the payload board. At a 1.5V core on 0.15 um process, static power is low, preserving payload power budget. The 1272-pin CCGA gives generous I/O for high-width data buses between ADCs, mass memory, and downlink modems. Designers should budget timing closure in Libero SoC and order flight die early given long lead times.
Empfohlen
Spacecraft Bus Control and Telemetry
Spacecraft on-board computers, telemetry/telecommand (TM/TC) interfaces, and platform controllers benefit from the RTAX4000SL-CG1272B's live-at-power-up behavior: the FPGA is functional within microseconds of power application, with no configuration latency window during which the spacecraft would be unresponsive. This is a decisive advantage over SRAM FPGAs for critical bus functions such as power-switch sequencing, watchdog logic, and CCSDS TM/TC frame handling. The 4M-gate fabric accommodates MIL-STD-1553 or SpaceWire bridge cores alongside the platform controller, and the 1272-pin CCGA exposes enough I/O for redundant bus interfaces. Its radiation-tolerant antifuse architecture means the configuration path has no SEU exposure, simplifying the FDIR argument for the bus controller. Designers typically pair it with space-grade voltage supervisors and rad-tolerant memories; timing analysis in Libero SoC at the selected speed grade closes well below 100 MHz for bus-rate logic.
Empfohlen
Instrument Front-End Signal Processing
Science instruments - spectrometers, star trackers, radiation monitors, and imaging chains - need deterministic, low-latency pre-processing close to the sensor. The RTAX4000SL-CG1272B's 40320 logic cells implement correlators, FIR filters, decimation chains, and sensor-timing generators with predictable timing because the antifuse fabric has no configuration-dependent routing variability. The large 1272-pin CCGA supports wide parallel sensor interfaces, minimizing serialization latency and simplifying EMI design versus high-speed serial links. Low static power from the 1.5V core helps cryogenic and battery-limited instrument platforms. Because the device is immune to configuration upsets, instrument logic that must run unattended for years in orbit does not require a scrubbing subsystem. System architects should characterize SEU behavior of user flip-flops per Microchip radiation reports and apply TMR selectively on state machines, keeping the mitigation overhead within the 4M-gate budget.
Empfohlen
Launch Vehicle Avionics
Launch vehicle flight computers, stage-separation sequencers, and telemetry encoders demand logic that is operational at power-up and immune to the vibration and radiation environment of ascent. The ceramic column grid array package of the RTAX4000SL-CG1272B is specifically engineered for the mechanical stress of launch: solder columns accommodate CTE mismatch between the ceramic package and organic PCB through thermal cycling and shock. Its antifuse configuration cannot be disturbed by heavy-ion events during high-altitude flight segments. With 4M gates, a single device can host the sequencer, redundant-voting logic, and encoder functions that would otherwise span multiple devices, reducing board count. Avionics designers value the deterministic timing and single-chip form factor for certification; they should fix the speed grade early (standard or -1) and run Libero timing analysis against worst-case temperature corners specified in the RTAX-S/SL datasheet.
Empfohlen
Reconfigurable Computing Modules for Space
On-board computing modules that host algorithm acceleration - image processing, encryption, or AI inference kernels - use the RTAX4000SL-CG1272B where mission lifetime and radiation hardness outweigh the flexibility of SRAM FPGAs. While the fabric itself is one-time-programmable, parameterization and mode registers implemented in logic allow in-flight reconfiguration of algorithm behavior without reprogramming the device, a common space-systems pattern. The 4M-gate capacity hosts multiple accelerator engines plus memory controllers for external rad-tolerant SRAM/SDRAM. The 1272-pin CCGA supports wide memory buses and multiple redundant SpaceWire/1553 links. Compared to SRAM alternatives, the design trades in-orbit full-fabric reconfiguration for structural SEU immunity at the configuration level - usually the right trade for multi-year missions. Estimated: with a 1.5V core and moderate clock rates near 50-100 MHz, dynamic power scales linearly with utilization, so budget gate usage against the module's power allocation.
Empfohlen
Deep Space and Science Mission Logic
Deep-space missions encounter harsher TID and heavy-ion environments than low-Earth-orbit missions, making configuration-immune logic especially valuable. The RTAX4000SL-CG1272B's antifuse fabric cannot experience configuration upsets regardless of particle flux, so missions to Jupiter or beyond avoid the scrubbing-bandwidth and EDAC-overhead penalties that SRAM FPGA designs accumulate. The 4M-gate capacity supports autonomous fault-management logic, science data packetization, and instrument control suitable for long cruise phases with minimal supervision. The hermetic CCGA package suits the thermal cycling of deep-space payloads. Mission teams should obtain the family radiation report from Microchip for TID and SEE figures applicable to their orbit, and apply SEU-tolerant coding to user registers per the datasheet guidance. Long procurement lead times for flight die make early ordering essential; the RTAX prototyping methodology (footprint-compatible adaptor board plus EDIF netlist conversion) allows firmware development in parallel with silicon procurement.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für RTAX4000SL-CG1272B – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | RTAX4000SL-1CG1272B | RTAX4000SL-CGS1272B | RTAX4000S-CG1272B |
|---|---|---|---|---|
| Brand | Microchip Technology (Actel/Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology (Actel) |
| Package | 1272-pin CCGA | 1272-pin CCGA - same | 1272-pin CCGA (S-lid variant) - same footprint | 1272-pin CCGA - same |
| Equivalent Gates | 4,000,000 | 4,000,000 | 4,000,000 | 4,000,000 |
| Logic Cells | 40320 | 40320 | 40320 | 40320 |
| Family Generation | RTAX-SL | RTAX-SL | RTAX-SL | RTAX-S (previous generation) |
| Speed Grade | Standard | -1 (faster) | Standard | Standard (SL fabric is faster than S) |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Configuration Immunity | OTP antifuse, immune to configuration upsets | OTP antifuse - same | OTP antifuse - same | OTP antifuse - same |
| Relative Power | Low (SL generation) | Low (SL generation) | Low (SL generation) | Higher (older S generation) |
Wichtigste Unterscheidungsmerkmale
- Improved SL generation fabric (vs. RTAX4000S-CG1272B)
- Faster timing margin available in same footprint (vs. RTAX4000SL-1CG1272B)
- Structural configuration upset immunity (vs. RTAX4000SL-CGS1272B and all SRAM FPGAs)
Designhinweise
Fix the speed grade decision (standard vs -1) before PCB layout is frozen. The RTAX4000SL-CG1272B standard grade and the RTAX4000SL-1CG1272B share the identical 1272-pin CCGA footprint, but timing closure at your target clock frequency may require the -1 grade. Run Libero SoC timing analysis on the full design against worst-case temperature corners from the RTAX-S/SL datasheet before committing to the purchase order, because space-grade silicon lead times make late upgrades costly.
The RTAX-SL fabric operates from a 1.5V core; provide clean core and I/O rails with the decoupling network recommended in the RTAX-S/SL datasheet power section. Static power is low due to the antifuse architecture, but dynamic power scales with clock frequency and toggling rate - high-utilization designs above roughly 50 MHz should use Microchip's SmartPower analyzer in Libero SoC to estimate rail currents and size the point-of-load converters with margin for worst-case vector sequences.
The 1272-pin CCGA uses solder columns specifically to accommodate CTE mismatch between the ceramic package and the organic PCB. Follow Microchip's CCGA assembly and land-pattern application notes: use the column land pattern without via-in-pad where possible, control board warpage during reflow, and define an inspection strategy (X-ray or vision) for the full column array. Avoid reworking individual columns; replacement typically requires a profile-controlled full reflow.
With 1272 pins available, group high-speed buses on contiguous banks and reference them to solid ground planes directly beneath. Because the device is intended for radiation environments, use series termination on long single-ended nets and follow the I/O bank current limits in the datasheet. For SpaceWire or other serial links, implement the PHY externally or use supported cores and verify jitter against the LVDS/CMOS I/O AC specifications in the RTAX-S/SL datasheet.
Compliance-Informationen
Space-grade hermetic ceramic CCGA package; AEC-Q100 is an automotive standard and not applicable. RoHS/REACH status for space-grade ceramic packaging not stated in provided data - obtain from Microchip flight-qualification documentation.
