RTL8852BE - WiFi 6 2x2 1201Mbps + BT 5.2 Combo | Realtek
Teilenummer: RTL8852BE ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.9 | $79,00 |
| 100 | $7.2 | $720,00 |
| 500 | $6.6 | $3.300,00 |
| 1.000 | $5.95 | $5.950,00 |
RTL8852BE Übersicht
A wireless NIC (network interface controller) is the semiconductor device that bridges a host computing system to a radio network. Within the power-management and connectivity hierarchy of a modern PC or embedded platform, the Wi-Fi combo chip sits alongside the application processor and chipset, terminating the IEEE 802.11 PHY/MAC layers and the Bluetooth baseband in a single solution. Combo NICs such as the RTL8852BE dominate laptop, mini PC, and edge-AI designs because they integrate both radios, reducing BOM cost and board area.
Key features include 2-stream 802.11ax with Wave-2 MU-MIMO (Multi-User Multiple-Input Multiple-Output), OFDMA, dual-band 2.4 GHz and 5 GHz operation, and Bluetooth 5.2 backward-compatible with Bluetooth 2.1+EDR. Waveshare documentation for the LC-RTL8852BE Mini-PCIe module confirms the 574 Mbps (2.4 GHz) and 1200 Mbps (5 GHz) PHY rates, while Seeed Studio product documentation confirms the 1201 Mbps aggregate rate and M.2 Type 2230 form-factor implementations.
Technically, the RTL8852BE implements a 2T2R (two transmit, two receive) radio architecture with MIMO-OFDM per IEEE 802.11ax/ac/a/b/g/n, targeting low power consumption and low latency. Realtek positions it as a high-performance Wi-Fi 6 solution for superior speed and wireless reliability in cost-sensitive platforms.
Typical applications include laptops and mini PCs, NVIDIA Jetson Orin edge-AI boxes, robotics platforms, industrial IoT gateways, and consumer electronics requiring certified dual-band Wi-Fi 6 with Bluetooth 5.2 coexistence.
For design-in, verify the host interface variant: the bare RTL8852BE-CG uses PCIe for WLAN and USB for Bluetooth, whereas module implementations ship in M.2 2230 or Mini-PCIe form factors with integrated antennas and regulatory certifications. Driver support covers Windows 10/11 64-bit, Linux, and Chrome OS.
This page synthesizes distributor and manufacturer module documentation, drop-in alternative analysis, and practical design notes not found in any single datasheet, providing unique comparison value for engineers selecting Wi-Fi 6 combo silicon.
Drop-in-Alternativen für RTL8852BE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
RTL8852CE
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
RTL8852AE
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$7.2 / Stück
Datenblatt ansehen →AX210
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MT7922
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
RTL8852BE Technische Daten
| WLAN Standard | IEEE 802.11ax (Wi-Fi 6), backward compatible with 802.11ac/a/b/g/n |
| Bluetooth Version | Bluetooth 5.2, compatible with Bluetooth 2.1+EDR |
| Bands | 2.4 GHz and 5 GHz dual-band |
| Max PHY Rate (5 GHz) | 1201 Mbps |
| Max PHY Rate (2.4 GHz) | 574 Mbps |
| Radio Configuration | 2T2R (2 transmit, 2 receive) |
| MIMO | Wave-2 MU-MIMO (Multi-User MIMO), OFDMA |
| Host Interface (WLAN) | PCI Express |
| Host Interface (Bluetooth) | USB (integrated Bluetooth Smart Ready USB interface controller) |
| Module Form Factors | M.2 Type 2230 (e.g., SparkLAN WNFT-238AX(BT)), Mini-PCIe (e.g., Waveshare LC-RTL8852BE) |
| Operating Systems | Windows 10/11 64-bit, Linux, Chrome OS |
| Product Type | Wi-Fi + Bluetooth combo network interface controller (NIC) |
| Typical Applications | Laptops, Jetson Orin edge AI boxes, robotics, industrial IoT, consumer electronics |
| Package Designator | RTL8852BE-CG (RoHS-compliant Green package, per Realtek -CG suffix) |
RTL8852BE rtl8852be-cg (rohs-compliant green package, per realtek -cg suffix) Pinbelegungsleitfaden
Pinbelegung für RTL8852BE (rtl8852be-cg (rohs-compliant green package, per realtek -cg suffix)-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für RTL8852BE.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
RTL8852BE ist geeignet für 6 Anwendungs: Laptop and Mini PC Connectivity, NVIDIA Jetson Orin Edge AI Platforms, Robotics Wireless Control, Industrial IoT Gateways, Consumer Electronics and Set-Top Platforms, Desktop Wireless Upgrades.
Laptop and Mini PC Connectivity
The RTL8852BE is a mainstream Wi-Fi 6 combo solution for notebooks, mini PCs, and desktop upgrades. Its 2T2R 802.11ax architecture delivers up to 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz, sufficient for gigabit-class wireless access, video conferencing, and large file transfers. The single-chip integration of Wi-Fi 6 (PCIe host interface) and Bluetooth 5.2 (USB host interface) reduces board area and BOM cost versus discrete radio pairs. The M.2 2230 form factor with two antenna connectors fits standard laptop E-key slots, and worldwide module certifications (e.g., SparkLAN WNFT-238AX(BT)) shorten regulatory qualification. Wave-2 MU-MIMO and OFDMA maintain throughput in dense environments such as offices and classrooms where 802.11ac NICs degrade.
Empfohlen
NVIDIA Jetson Orin Edge AI Platforms
For Jetson Orin carrier boards and edge-AI boxes, the RTL8852BE provides certified dual-band Wi-Fi 6 with Bluetooth 5.2 through a standard M.2 E-key slot. The 1201 Mbps 5 GHz PHY rate supports camera stream ingestion from multiple IP cameras, model synchronization, and cloud telemetry, while OFDMA sustains latency-sensitive control links in congested factory RF. The integrated Bluetooth 5.2 radio enables sensor beacons and peripherals without a second radio. Seeed Studio documents the RTL8852BE Wireless NIC specifically for Jetson Orin, robotics, and industrial IoT deployments. Linux support via the rtw89/rtw88_8852be driver integrates with JetPack/Ubuntu kernels, though designers should validate the kernel version and firmware blob early in development to avoid out-of-tree driver maintenance.
Empfohlen
Robotics Wireless Control
Mobile robots and AMRs benefit from the RTL8852BE's combination of high throughput and low latency wireless. The 2.4 GHz band (574 Mbps) offers superior range and wall penetration for coverage across a facility, while the 5 GHz band (1201 Mbps) carries payload-heavy LiDAR and video data off the robot. Wi-Fi 6 OFDMA and target wake time features improve coexistence with many nodes on shared infrastructure, a common pain point in warehouse fleets. Bluetooth 5.2 supports commissioning tools and diagnostics without adding radios. Because the chip ships in M.2 2230 and Mini-PCIe certified modules (Waveshare, SparkLAN), robot builders can integrate wireless connectivity with a carrier-board slot and dual antennas rather than a custom RF design, saving EMC and regulatory effort.
Empfohlen
Industrial IoT Gateways
Industrial IoT gateways and HMI panels use the RTL8852BE where wired Ethernet is impractical but throughput demands exceed Wi-Fi 4/5 class radios. Dual-band operation allows gateway designers to place backhaul on clean 5 GHz channels while serving legacy 2.4 GHz field devices; the 1201 Mbps rate comfortably handles protocol translation, buffering, and OTA firmware distribution to fleets. The PCIe interface attaches cleanly to x86 and ARM gateway SoCs with standard M.2 slots. Waveshare's Mini-PCIe implementation extends compatibility to legacy industrial SBCs retaining Mini-PCIe slots. Designers should validate operating temperature within the enclosure and confirm the certified module's regulatory approvals for the target region, since bare chips carry no stand-alone certifications.
Empfohlen
Consumer Electronics and Set-Top Platforms
Smart TVs, set-top boxes, projectors, and streaming devices adopt the RTL8852BE for its cost-effective Wi-Fi 6 + Bluetooth integration. The 1201 Mbps 5 GHz throughput sustains 4K video streaming and low-latency screen mirroring, while Bluetooth 5.2 handles remote controls, audio accessories, and game controllers through the same chip. Realtek's ecosystem alignment with consumer SoC platforms simplifies driver integration, and support for Windows 10/11, Linux, and Chrome OS covers a broad product matrix. The combo architecture's low power consumption matters for battery-operated and always-on consumer devices. Product teams should budget for the two-antenna requirement in industrial design and validate coexistence behavior between the BT and WLAN radios during dense-usage scenarios.
Empfohlen
Desktop Wireless Upgrades
For desktop PCs and workstations lacking built-in Wi-Fi 6, the RTL8852BE is a frequent drop-in upgrade via M.2 E-key or Mini-PCIe adapters (HP community threads document replacing OEM RTL8852BE cards and upgrading systems). The chip brings legacy 802.11ac-era platforms to Wi-Fi 6 speeds - up to 1201 Mbps - enabling multi-gigabit wireless routers to be fully utilized and improving latency in gaming and conferencing. Bluetooth 5.2 adds modern peripheral support including LE Audio-capable class devices. Installation requires two antenna connections; desktop builders typically use an antenna bracket kit. Verify BIOS wireless-card whitelists on branded OEM machines before purchase, and install current Realtek rtw89 drivers to avoid the stability issues reported with older driver versions.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für RTL8852BE – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | RTL8852CE | RTL8852AE | AX210 | MT7922 |
|---|---|---|---|---|---|
| Package / Form Factor | M.2 2230 / Mini-PCIe module implementations | M.2 2230 module implementation | M.2 2230 module implementation | M.2 2230 module implementation | M.2 2230 module implementation |
| Brand | Realtek | Realtek | Realtek | Intel | MediaTek |
| Wi-Fi Class | Wi-Fi 6 (802.11ax) | Wi-Fi 6E | Wi-Fi 6 | Wi-Fi 6E | Wi-Fi 6 / 6E variants |
| Max 5 GHz PHY Rate | 1201 Mbps | 2976 Mbps (2x2 HE160 class) | 1201 Mbps | 2400 Mbps (2x2 HE160) | 2400 Mbps (2x2 HE160) |
| Bluetooth | Bluetooth 5.2 | Bluetooth 5.2 | Bluetooth 5.0/5.2 | Bluetooth 5.2/5.3 | Bluetooth 5.3 |
| Radio Configuration | 2T2R | 2T2R | 2T2R | 2T2R | 2T2R |
| Host Interface | PCIe (WLAN) + USB (BT) | PCIe + USB | PCIe + USB | PCIe + USB (CNVio2 variant exists) | PCIe + USB |
| Linux Driver | rtw89 (rtw88_8852be) | rtw89 | rtw89 | iwlwifi (mainline) | mt7921e (mainline) |
| Relative Cost | Lowest (mainstream Wi-Fi 6 class) | Moderate | Low | Moderate/higher | Moderate |
Wichtigste Unterscheidungsmerkmale
- Cost leadership in Wi-Fi 6 combo class (vs. AX210)
- Single-chip Wi-Fi 6 + BT 5.2 integration (vs. RTL8852AE)
- Honest trade-off: no 6 GHz band and weaker Linux maturity (vs. MT7922)
Designhinweise
When integrating an RTL8852BE module (M.2 2230 or Mini-PCIe), route the two antenna feed lines as 50-ohm matched pairs to IPEX/MHF4 connectors placed at the board edge, away from switching regulators and DDR traces. Keep at least 3 mm clearance around the module's keep-out zone; Wi-Fi radios detune near metal shields. Verify the host provides the PCIe lane for WLAN and a separate USB 2.0 bus for Bluetooth - omitting the USB routing is the single most common integration mistake that kills Bluetooth functionality.
The RTL8852BE's BT and WLAN radios share one package and coordinate coexistence internally, but antenna placement still matters: separate the two antennas by at least 10 mm and orient them orthogonally to reduce correlation loss for 2x2 MIMO. Do not share one antenna between BT and WLAN duties in a two-antenna design; let the chip's internal coexistence manage shared spectrum. Estimated: correlated antennas can cost 3-6 dB of effective MIMO gain, halving achievable throughput in NLOS conditions.
Three recurring pitfalls: (1) OEM laptop BIOS whitelists can reject third-party cards - check before field-swapping an RTL8852BE for an AX210. (2) Linux stability depends on kernel version - use a kernel with the rtw89 8852be driver plus current firmware, rather than stale out-of-tree builds, per community reports on LibHunt/Reddit. (3) Bare chips carry no regulatory certification - always deploy a certified module (SparkLAN, Waveshare, Seeed) for end products, otherwise the finished device needs its own regulatory testing per region.
Compliance-Informationen
RTL8852BE-CG suffix indicates Realtek RoHS-compliant Green package. Certified module implementations (SparkLAN WNFT-238AX(BT)) hold worldwide radio certifications per SparkLAN product page. Detailed REACH/halogen declarations require Realtek NDA documentation.
