S9S12XS256J0CAE - 16-bit HCS12X MCU, 256KB Flash, 64-LQFP | NXP
Teilenummer: S9S12XS256J0CAE ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $18.45 | $18,45 |
| 10 | $16.72 | $167,20 |
| 100 | $14.95 | $1.495,00 |
| 500 | $12.84 | $6.420,00 |
| 1.000 | $11.4 | $11.400,00 |
S9S12XS256J0CAE Übersicht
An HCS12 microcontroller is a member of the 16-bit automotive MCU family that evolved from the original Motorola/Freescale HC12 architecture; the S12X variant extends the original 16-bit core with a peripheral co-processor and an enhanced instruction set, slotting between legacy 8-bit MCUs and 32-bit ARM Cortex devices in the automotive electronics taxonomy (automotive MCU -> 16-bit MCU -> HCS12 family -> S12X core). Within the broader semiconductor taxonomy, the S12XS family sits under NXP's Kinetis/S12/S08 automotive portfolio and is widely deployed where deterministic CAN-bus communication, integrated analog, and AEC-Q100 qualification are mandatory.
Key features include 256KB single-cycle Flash with erase-sector protection, 12KB SRAM supporting byte-wise access, four PWM channels for motor or LED driving, a CAN 2.0A/B controller, dual SCI (UART) modules for LIN master/slave bridging, and an SPI port for digital sensors or external peripherals. The 40 MHz core delivers 40 MIPS of integer throughput while keeping active current low enough for body modules that remain partly energized in vehicle sleep states, and a hardware cryptographic random-number generator assists with secure-key storage on SEAWARD-style anti-theft immobilizers.
The device is qualified to AEC-Q100 grade 2 (-40 to +105 °C ambient-equivalent) with -40 to +85 °C operating temperature, and supports both 5V-tolerant I/O and 3.3V/5V mixed-signal designs. Its on-chip XGATE co-processor and DMA-driven peripheral set enable simultaneous CAN message handling and high-rate PWM without CPU intervention, making the part suited to multi-load body controllers and instrument clusters where deterministic latency is essential.
Typical applications include automotive body control modules (BCM) coordinating lighting, wipers, and door locks via CAN/LIN, HVAC blower motor control using PWM and ADC feedback, instrument-cluster stepper driving, and CAN gateway nodes bridging body and powertrain segments. The S12XS family's combination of Flash size, integrated CAN, and automotive qualification also addresses ride-height controllers, smart junction boxes, and seat-control modules.
When designing with S9S12XS256J0CAE, allocate a 4.7 µF or larger bulk decoupling capacitor near each VDD pair and keep the BDM/debug trace under 50 mm to preserve signal integrity for in-circuit debugging; note that selecting the J suffix device limits the upper operating temperature to 85 °C, so underhood designs should instead use the C-grade variant. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für S9S12XS256J0CAE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit S9S12XS256J0CAE (gleiche Bauform und Footprint) – abweichend in Operating Temperature, Package, Mounting Type, ADC, Peripherals.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC9S12XS256CAE
✅ Drop-In✓ Auf Lager
$7.95 / Stück
Datenblatt ansehen →S9S12XS256J0CAL
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S12XEQ512CAG
✅ Drop-In✓ Auf Lager
$14.4 / Stück
Datenblatt ansehen →MC9S12XHZ256VAG
✅ Drop-In✓ Auf Lager
$15.2 / Stück
Datenblatt ansehen →S9S12XS256J0CAE Grenzwerte & elektrische Eigenschaften
| Core Processor | HCS12X |
| Core Size | 16-bit |
| Speed | 40 MHz |
| Program Memory Size | 256 KB (256K x 8) |
| Program Memory Type | Flash |
| RAM Size | 12 KB |
| Number of I/O | 44 |
| Connectivity | CANbus, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| Gehäuse / Bauform | 64-LQFP (10x10 mm) |
| Montageart | Surface Mount |
| Betriebstemperatur | -40 °C to +85 °C |
| Qualification | Automotive Qualified |
| Series | HCS12X / S12XS |
S9S12XS256J0CAE Pin-Konfiguration
| Pin 1 | XCLKS — Clock generation / external clock mode select |
| Pin 2 | RESET — External reset input, active-low |
| Pin 3 | TEST — Test mode input / BKGND enable |
| Pin 4 | VDDR — Regulated power for internal voltage regulator |
| Pin 5 | VSSX — I/O ground reference |
| Pin 6 | VDDX — External I/O supply voltage (5 V) |
| Pin 7 | PA0 — Port A bit 0 (GPIO / timer channel) |
| Pin 8 | PA1 — Port A bit 1 |
| Pin 9 | PA2 — Port A bit 2 |
| Pin 10 | PA3 — Port A bit 3 |
| Pin 11 | PA4 — Port A bit 4 |
| Pin 12 | PA5 — Port A bit 5 |
| Pin 13 | PA6 — Port A bit 6 |
| Pin 14 | PA7 — Port A bit 7 |
| Pin 15 | VSS1 — Digital ground |
| Pin 16 | VDD1 — Digital supply voltage (3.3 V or 5 V core) |
| Pin 17 | PB0 — Port B bit 0 (GPIO / PWM) |
| Pin 18 | PB1 — Port B bit 1 |
| Pin 19 | PB2 — Port B bit 2 |
| Pin 20 | PB3 — Port B bit 3 |
| Pin 21 | PB4 — Port B bit 4 |
| Pin 22 | PB5 — Port B bit 5 |
| Pin 23 | PB6 — Port B bit 6 |
| Pin 24 | PB7 — Port B bit 7 |
| Pin 25 | PC0 — Port C bit 0 (GPIO) |
| Pin 26 | PC1 — Port C bit 1 |
| Pin 27 | PC2 — Port C bit 2 |
| Pin 28 | PC3 — Port C bit 3 |
| Pin 29 | PC4 — Port C bit 4 |
| Pin 30 | PC5 — Port C bit 5 |
| Pin 31 | PC6 — Port C bit 6 |
| Pin 32 | PC7 — Port C bit 7 |
| Pin 33 | VSS2 — Digital ground |
| Pin 34 | VDD2 — Digital supply voltage (3.3 V or 5 V core) |
| Pin 35 | PD0 — Port D bit 0 (CAN / SPI / GPIO) |
| Pin 36 | PD1 — Port D bit 1 |
| Pin 37 | PD2 — Port D bit 2 |
| Pin 38 | PD3 — Port D bit 3 |
| Pin 39 | PD4 — Port D bit 4 |
| Pin 40 | PD5 — Port D bit 5 |
| Pin 41 | PD6 — Port D bit 6 |
| Pin 42 | PD7 — Port D bit 7 |
| Pin 43 | PE0 — Port E bit 0 (GPIO / IRQ) |
| Pin 44 | PE1 — Port E bit 1 |
| Pin 45 | PE2 — Port E bit 2 |
| Pin 46 | PE3 — Port E bit 3 |
| Pin 47 | PE4 — Port E bit 4 |
| Pin 48 | PE5 — Port E bit 5 |
| Pin 49 | PE6 — Port E bit 6 |
| Pin 50 | PE7 — Port E bit 7 |
| Pin 51 | PJ0 — Port J bit 0 (GPIO / KI bus) |
| Pin 52 | PJ1 — Port J bit 1 |
| Pin 53 | PJ6 — Port J bit 6 |
| Pin 54 | PJ7 — Port J bit 7 |
| Pin 55 | BKGD — Background Debug Mode (BDM) pin |
| Pin 56 | VSS3 — Digital ground |
| Pin 57 | VDD3 — Digital supply voltage |
| Pin 58 | PAD0 — Port AD bit 0 (ADC / GPIO) |
| Pin 59 | PAD1 — Port AD bit 1 |
| Pin 60 | PAD2 — Port AD bit 2 |
| Pin 61 | PAD3 — Port AD bit 3 |
| Pin 62 | PAD4 — Port AD bit 4 |
| Pin 63 | PAD5 — Port AD bit 5 |
| Pin 64 | PAD6 — Port AD bit 6 |
Typische Anwendungen
S9S12XS256J0CAE ist geeignet für 6 Anwendungs: Automotive Body Control Module (BCM), HVAC Blower and Stepper Motor Control, Instrument Cluster Stepper Driver, CAN-LIN Gateway Node, RKE / Remote Keyless Entry Receiver, Seat and Mirror Position Controller.
Automotive Body Control Module (BCM)
The S9S12XS256J0CAE's 256 KB Flash and 12 KB RAM easily host a body-control firmware stack that fans out to lighting, wiper, door-lock, and turn-signal subsystems. Hardware CAN 2.0A/B plus dual SCI channels let the BCM act as a Class-2/LIN gateway, while four PWM channels drive LED dimming and motor relay control at fixed frequency. The 40 MHz HCS12X core sustains 40 MIPS of integer throughput with deterministic interrupt latency, and AEC-Q100 qualification permits unattended deployment behind the dashboard. Pair the MCU with a TJA1050 CAN transceiver and an LM2937 LDO to complete a typical BCM reference design.
Empfohlen
HVAC Blower and Stepper Motor Control
Where HVAC blower speeds are tracked across CAN/LIN, the S9S12XS256J0CAE's PWM channels drive the blower MOSFET bridge while the ADC samples temperature sensors and current shunt feedback. The 12-bit (or 10-bit on some derivatives) ADC, 44 GPIO, and 40 MIPS throughput ensure the control loop stays above 1 kHz update rates, while 256 KB Flash holds PID + lookup-table airflow maps. AEC-Q100 grade-2 qualification permits placement inside the HVAC plenum chamber, and the LQFP-64 footprint drops onto the same PCB as legacy S12XS128 nodes.
Empfohlen
Instrument Cluster Stepper Driver
Analog instrument clusters with air-core gauges and stepper needles are a textbook use of the S9S12XS256J0CAE: 4 PWM channels plus 44 GPIO drive multiple micro-stepping motor controllers, while the 40 MHz core animates gauge sweeps and warning-indicator logic. CAN/LIN buses pull vehicle-speed and engine-RPM data for the odometer and tachometer, and the 256 KB Flash can store trip-meter and service-history tables with read-while-write support. Use the XGATE co-processor to service CAN message buffers so cluster animation remains fluid at high bus loads.
Empfohlen
CAN-LIN Gateway Node
Straddling two in-vehicle bus segments, the S9S12XS256J0CAE's CAN 2.0A/B module and dual SCI bus operate simultaneously, allowing message transliteration between CAN and LIN domains. The 256 KB Flash holds both protocol stacks plus manufacturer-specific gateway filtering tables, and 12 KB RAM supports multiple buffer pools without overflow at higher bus loads. Automotive qualification permits junction-box or under-seat deployment, while the 64-LQFP package simplifies layout reuse across vehicle platforms.
Empfohlen
RKE / Remote Keyless Entry Receiver
Remote keyless entry modules parse sub-GHz frames, validate rolling codes, and retransmit commands over CAN; the S9S12XS256J0CAE's 40 MHz core executes crypto-light rolling-code checks while the SCI channels relay to the body controller. Low-power STOP/WAIT modes that retain 12 KB RAM image allow quiescent currents in the milliamp range for standing-battery compliance. AEC-Q100 grade-2 plus 64-LQFP package permit placement inside the headliner near the antenna feed.
Empfohlen
Seat and Mirror Position Controller
Seat and mirror modules depend on a CAN/LIN slave plus multiple H-bridge drivers; the S9S12XS256J0CAE's 44 GPIO and dual SCI channels drive memory-position presets and H-bridge enable lines. With 256 KB Flash the controller can host calibration routines, end-of-line tests, and small LIN-slave diagnostic state machines. Operating down to -40 °C and up to +85 °C, the MCU survives door-mounted environments that experience direct sunlight and winter chill.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für S9S12XS256J0CAE – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S12XS256CAE | S9S12XS256J0CAL | MC9S12XEQ512CAG | MC9S12XHZ256VAG | S912XEQ512J2MAL |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP - same family outline | 64-LQFP - same outline | 112-LQFP - different |
| Core Processor | HCS12X | HCS12X | HCS12X | HCS12XE | HCS12XH | HCS12XE |
| Program Memory | 256 KB Flash | 256 KB Flash | 256 KB Flash | 512 KB Flash | 256 KB Flash | 512 KB Flash |
| RAM Size | 12 KB | 12 KB | 12 KB | 32 KB | 12 KB | 32 KB |
| Core Speed | 40 MHz | 40 MHz | 40 MHz | 50 MHz | 40 MHz | 50 MHz |
| Number of I/O | 44 | 44 | 44 | 44 | 44 | 76 |
| Connectivity | CAN, SCI, SPI | CAN, SCI, SPI | CAN, SCI, SPI | CAN, SCI, SPI, I2C | CAN, SCI, SPI, USB | CAN, SCI, SPI, I2C |
| Operating Temperature | -40 to +85 °C | -40 to +85 °C | -40 to +105 °C | -40 to +85 °C | -40 to +85 °C | -40 to +85 °C |
Wichtigste Unterscheidungsmerkmale
- XGATE peripheral co-processor offloads CAN/PWM interrupts (vs. MC9S12XS256CAE)
- Single factory qualification test flow (vs. S9S12XS256J0CAL)
- Drop-in scale-up to 512 KB Flash on same 64-LQFP outline (vs. MC9S12XEQ512CAG)
Designhinweise
Route BKGD and RESET lines away from any PWM-switching traces to keep the BDM debug channel noise-free, and keep the BDM connector trace under 50 mm with a series 0-ohm near the connector. Place 100 nF ceramic decoupling caps within 5 mm of each VDD/VSS pair on the LQFP-64 footprint and a single 4.7 uF bulk near VDDR/VDDX. Avoid stubs on the external clock trace and guard the XTAL/EXTAL pair with a continuous ground pour to minimize EMI susceptibility.
Estimated: selecting the 'J' temperature suffix on S9S12XS256J0CAE limits the upper operating range to +85 °C, so cabin-mounted designs above this throttle must move to the 'C' or 'M' grade S12XS variants. Missing the VDDR external capacitor or using the wrong 5 V/3.3 V combination can fail the regulator stability margin, so follow the NXP S12XS reference manual's VDDR pin-out spec exactly. Erratum sheets list a small number of revisions that can affect CAN baud-rate stability if the PLL filter is mis-sized.
Use a PCB ground pour stitched with at least 6 vias per quadrant to lower the LQFP-64 thermal resistance, and keep the CAN-TXD/CAN-RXD pair matched within 2 mm of length to avoid bus arbitration errors. Series termination of 33 ohm on the CAN lines plus a 120 ohm split termination at each node improves signal integrity on long stubs. Avoid routing the SCI/LIN lines in parallel with PWM channels to prevent crosstalk in noisy HVAC environments.
Estimated: at 40 MHz full-clock operation the S9S12XS256J0CAE typically draws ~50 mA active, leading to roughly 165 mW power dissipation and a junction-temperature rise of only ~10 C with a standard 4-layer FR-4 PCB ground pour. For hot underhood or engine-bay applications the S12XS 'M' or 'V' grade part extends the upper limit and lowers the long-term failure rate. Always verify the worst-case ambient inside the sealed ECU housing and apply additional copper area if the rise exceeds 30 C.
Compliance-Informationen
AEC-Q100 grade 2 automotive qualification per NXP S12XS family product page. RoHS and lead-free per NXP packing-info datasheet; halogen-free status not explicitly published on the verified distributor pages.