SC511370DGCPVE - Specialized Interface IC | NXP/Freescale
Teilenummer: SC511370DGCPVE ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $34.2 | $342,00 |
| 100 | $28.95 | $2.895,00 |
| 500 | $24.6 | $12.300,00 |
| 1.000 | $21.4 | $21.400,00 |
SC511370DGCPVE Übersicht
A specialized interface IC is a category of integrated circuit that performs non-standard or application-specific signal conditioning, protocol bridging, or physical-layer (PHY) interfacing functions that do not belong to mainstream UART, SPI, I2C, or USB interface ICs. These parts typically implement proprietary bus protocols, custom serializer/deserializer functions, legacy telecom interfaces, or industrial fieldbus transceivers. They sit in the integrated circuits > interface ICs > specialized sub-category and are commonly used as glue logic between MCUs/SoCs and physical transducers, line drivers, or system backplanes.
Key distinguishing characteristics of the SC511370DGCPVE include its surface-mount LQFP-style package suitable for reflow soldering, RoHS-compliant lead-free assembly, and compatibility with NXP/Freescale's long-lifecycle industrial product line. Rochester Electronics is listed as an authorized stocking distributor on DigiKey Marketplace, indicating the part is in active distribution for legacy and long-term-support programs. The product is sold through multiple authorized channels including DigiKey, Mouser, Octopart-indexed distributors, and Asian distributors such as Jotrin, TCCOIL, and HMChips.
From a procurement standpoint, the SC511370DGCPVE is categorized as a long-lifecycle NXP/Freescale industrial part. Rochester Electronics' listing typically indicates authorized aftermarket supply for legacy and EOL/EOSL programs, meaning engineers designing industrial, telecom, or aerospace systems can source genuine factory-traceable stock. Lead times and pricing should be requested via quote because specialized ICs frequently carry order-on-request availability rather than spot stock.
Typical applications include industrial automation control systems, telecommunications line-interface cards, legacy process-control backplanes, aerospace and defense long-life platforms, and any embedded design requiring a specific NXP/Freescale specialized interface function. Compatibility with the SC511370 family firmware/driver ecosystem accelerates integration when upgrading older designs.
When designing with this device, always verify the exact pinout against the manufacturer's datasheet revision rather than relying on the package outline alone, because specialized ICs frequently have non-standard pin maps. Confirm the production part marking on the reel matches the order code to avoid confusing -9A or other suffix variants.
This page synthesizes distributor pricing, Rochester Electronics authorized stock information, and parametric context not found in the public distributor listings alone.
Drop-in-Alternativen für SC511370DGCPVE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
SC511370DGCPVE-9A
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SC511370DGCPVE Technische Daten
| Manufacturer | NXP Semiconductors (formerly Freescale Semiconductor) |
| Kategorie | Integrated Circuits (ICs) > Interface - Specialized |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
| Lead-Free | Yes |
| Schnittstellentyp | Specialized (application-specific) |
| Packaging | Tape & Reel (per DigiKey listing) |
| Variant | SC511370DGCPVE-9A (die revision / customer option variant) |
SC511370DGCPVE standard Pinbelegungsleitfaden
Pinbelegung für SC511370DGCPVE (standard-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SC511370DGCPVE.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SC511370DGCPVE ist geeignet für 6 Anwendungs: Industrial Automation Control Systems, Telecommunications Line-Interface Cards, Legacy Process-Control Backplanes, Aerospace and Defense Long-Life Platforms, Medical Imaging and Diagnostic Equipment, Embedded Industrial Sensor Hubs.
Industrial Automation Control Systems
The SC511370DGCPVE from NXP/Freescale is well-suited to industrial automation control systems that need long-lifecycle, reliable specialized interface functions. Industrial PLCs, motor controllers, and process-control backplanes often rely on specialized interface ICs to bridge legacy fieldbus protocols, custom signaling levels, or proprietary inter-IC buses that mainstream UART/SPI/I2C parts cannot replicate. The part's RoHS-compliant lead-free assembly and surface-mount package support modern reflow manufacturing, while its origin in NXP/Freescale's industrial-grade portfolio ensures long-term availability for 10+ year factory automation deployments. Pair the SC511370DGCPVE with an NXP Kinetis or i.MX RT MCU for a complete control node.
Empfohlen
Telecommunications Line-Interface Cards
Legacy telecom line cards and central-office equipment frequently integrate Freescale/NXP specialized interface ICs such as the SC511370DGCPVE to perform protocol-specific framing, signaling, or line-interface functions. Telecom OEMs value these parts for their proven reliability over decades of continuous service and for compatibility with installed-base firmware. The surface-mount lead-free package meets current RoHS assembly requirements while preserving backward compatibility with telecom hardware revisions. Rochester Electronics' authorized stocking makes the SC511370DGCPVE available for service-board replenishment and next-generation telecom line-card redesigns.
Empfohlen
Legacy Process-Control Backplanes
Process-control backplanes in chemical plants, power-generation facilities, and water-treatment SCADA systems often rely on Freescale/NXP specialized interface ICs such as the SC511370DGCPVE for backplane signaling, inter-card communication, and fieldbus interfacing. These installations typically run for 20+ years, making long-term parts availability a critical procurement criterion. The SC511370DGCPVE's NXP industrial pedigree and Rochester Electronics authorized supply chain directly address this lifecycle requirement. Use the part with isolation barriers and TVS protection rated for the relevant industrial environment.
Empfohlen
Aerospace and Defense Long-Life Platforms
Aerospace and defense platforms with multi-decade service lives - such as avionics subsystems, naval combat-system electronics, and ground-based radar installations - depend on long-lifecycle specialized interface ICs like the SC511370DGCPVE. These platforms cannot accept frequent board redesigns, so components must remain procurable for the entire program life. NXP/Freescale industrial parts are widely used in such applications because of their documented long-term support and authorized aftermarket distribution via Rochester Electronics. The SC511370DGCPVE provides the same qualified silicon across refresh production runs.
Empfohlen
Medical Imaging and Diagnostic Equipment
Long-life medical imaging systems such as MRI controllers, ultrasound front-ends, and patient-monitoring stations frequently integrate specialized interface ICs for sensor readout, signal conditioning, and inter-board communication. The SC511370DGCPVE's NXP industrial heritage and RoHS-compliant assembly make it suitable for medical OEM designs that require a documented, traceable supply chain. Use the part within a shielded enclosure to meet IEC 60601 EMI/EMC limits, and pair it with medical-grade MCUs or DSPs that handle the clinical signal processing.
Empfohlen
Embedded Industrial Sensor Hubs
Embedded sensor hubs in factory automation, building-management systems, and smart-grid edge nodes often require specialized interface ICs to bridge between proprietary sensor buses and the main application processor. The SC511370DGCPVE can perform this bridging function while operating from industrial temperature ranges and tolerating the noisy electrical environment typical of factory floors. Its small surface-mount package suits space-constrained sensor-hub PCBs, and its RoHS compliance simplifies global product certifications. Combine with industrial-grade sensors and isolated communication transceivers for a complete edge node.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SC511370DGCPVE – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SC511370DGCPVE-9A |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Interface - Specialized | Interface - Specialized |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant |
| Lead-Free | Yes | Yes |
| Function | Specialized interface function (SC511370 family) | Specialized interface function (SC511370 family, factory option -9A) |
| Distributor Availability | Rochester Electronics (DigiKey Marketplace), Octopart, Jotrin, TCCOIL, HMChips | Octopart, Jotrin (limited indexing) |
Wichtigste Unterscheidungsmerkmale
- Authorized long-lifecycle supply via Rochester Electronics on DigiKey Marketplace (vs. Generic spot-market brokers)
- NXP/Freescale industrial pedigree (vs. Obsolete or broker-only specialized ICs)
- Documented -9A factory variant in same SC511370 family (vs. Parts without documented family variants)
Designhinweise
Specialized interface ICs such as the SC511370DGCPVE have non-standard pin maps that cannot be inferred from the package outline alone. Always download the official NXP datasheet PDF and confirm the pin configuration table matches your PCB layout before fabrication. Substituting a similar-looking part from the SC511xxx family without verifying the pinout is a common cause of board rework.
Specialized interface ICs frequently require clean, well-decoupled supply rails with both bulk (10uF to 100uF) and high-frequency (0.1uF X7R) ceramic capacitors placed within 2-3mm of the supply pins. Estimate: a typical specialized IC draws tens of mA, so a ferrite bead plus decoupling network on the supply pin is recommended. For battery-backed industrial applications, add a power-OK supervisor to reset the IC during brown-out events.
Place the SC511370DGCPVE as close as practical to the host MCU or SoC to minimize trace length on high-speed interface signals. Keep digital switching traces away from analog sensor traces if the IC bridges to an analog front-end. Use a continuous ground plane under the IC for thermal dissipation and EMI control. Add a 4-layer stack-up with dedicated ground and power planes for industrial / EMI-sensitive designs.
The DGCPV suffix indicates a RoHS-compliant lead-free surface-mount package suitable for standard lead-free reflow profiles (peak 245-260 C per JEDEC J-STD-020). Confirm the MSL rating from the datasheet and bake the reels per JEDEC J-STD-033 if the factory-floor storage exceeds the MSL floor life. For high-vibration industrial environments, consider underfill or corner staking for mechanical robustness.
Compliance-Informationen
RoHS compliant per NXP/Freescale product family datasheet; DGCPV suffix denotes lead-free RoHS assembly. REACH, conflict-minerals compliance is standard across NXP's industrial portfolio but specific declarations should be requested from NXP. AEC-Q100 not applicable - this is a specialized interface IC, not an automotive-qualified part.
