SI3206-B-GQ - 2-Channel SLIC Codec | Skyworks Solutions
Teilenummer: SI3206-B-GQ ✓ AktivSI3206-B-GQ Übersicht
A SLIC is a telecommunications interface IC that sits between an analog subscriber line and a digital voice system. In the broader product hierarchy, a SLIC belongs to interface ICs, telecom interfaces, and subscriber-line access controllers. Unlike a codec used only for digital audio conversion, a SLIC must also support line-facing conditions, gain control, voice processing, and communications with a host or line interface processor. Combining the SLIC and codec functions reduces the number of devices required in a voice-access design.
The SI3206-B-GQ is designed for two-channel voice-line interfaces and supports an operating current of 45 mA. Its 3.3 V supply operation is suitable for modern telecommunications equipment, while the 63 dB specification defines the relevant voice-band signal level. GCI, PCM, and SPI interfaces provide configurable paths for system integration, host control, and digital transport. These features make the device suitable for voice gateways, subscriber-line access equipment, and multi-channel telephony systems.
The SI3206-B-GQ family was originally associated with Silicon Labs and is distributed as a Skyworks Solutions Inc. part. The SI3206-B-GQ suffix identifies a lead-free ordering configuration. Its 48-TQFP package provides a surface-mount solution for compact designs, although thermal performance and power dissipation must be checked when both line channels operate continuously. The manufacturer listing identifies the device as a two-channel SLIC and codec, while manufacturer documentation should be consulted for the final electrical limits and board-layout requirements.
Typical applications include two-channel voice gateways, digital loop terminators, subscriber-line access concentrators, voice-over-IP line interfaces, and telecommunications equipment that connects analog phone lines to PCM-based digital transport. The integrated codec can simplify the analog-to-digital voice path, while the available GCI, PCM, and SPI interfaces support different system partitioning strategies. System designers must match the selected line, codec, and digital interfaces to the device configuration used by the manufacturer.
Use the manufacturer pin-description table when assigning PCB tracks and verify all bypass capacitors, interface levels, clocking, and line-side connections against the device configuration. Because the line interface handles both signaling and voice traffic, controlled grounding and separated analog, digital, and power paths are important for preventing crosstalk and reducing system noise.
This page organizes the key device facts, sourcing guidance, interface use cases, and engineering trade-offs for engineers evaluating the SI3206-B-GQ. It also identifies where pinout, lifecycle, environmental, and exact replacement details must be confirmed with the manufacturer before a new design is released.
Drop-in-Alternativen für SI3206-B-GQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernSI3206-B-GQ Technische Daten
| Product Type | Subscriber Line Interface Concept (SLIC) and CODEC IC |
| Number of Channels | 2 channels |
| Versorgungsspannung | 3.3 V |
| Operating Current | 45 mA |
| Voice Signal Level | 63 dB |
| GCI Interface | Supported |
| PCM Interface | Supported |
| SPI Interface | Supported |
| Gehäuse | 48-TQFP, 7 mm x 7 mm |
| Montageart | Surface mount |
| Lead-Free Configuration | Yes |
| Application Category | Telecommunications interface |
SI3206-B-GQ 48-tqfp, 7 mm x 7 mm Pinbelegungsleitfaden
Pinbelegung für SI3206-B-GQ (48-tqfp, 7 mm x 7 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SI3206-B-GQ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SI3206-B-GQ ist geeignet für 6 Anwendungs: Two-Channel Voice Gateway, Subscriber-Line Access Concentrator, Digital Loop Terminator, Voice-over-IP Line Interface, Carrier Voice Line Card, PCM-Based Voice Terminal.
Two-Channel Voice Gateway
The SI3206-B-GQ fits a two-channel voice gateway because it combines a Subscriber Line Interface Concept and codec while supporting GCI, PCM, and SPI connectivity. Its 3.3 V operating supply and 45 mA operating-current specification suit compact, powered telecom line-card designs. The two-channel architecture lets one device handle two voice paths instead of duplicating separate line-interface and codec stages. The resulting system should allocate isolation, protection, and routing components for each subscriber line, then verify line impedance, codec timing, and gain calibration under worst-case loading.
Empfohlen
Subscriber-Line Access Concentrator
SI3206-B-GQ is appropriate for a subscriber-line access concentrator that terminates multiple analog voice channels and transfers them toward a digital switching system. Its two-channel SLIC and codec implementation reduces the number of devices required at each line interface, while GCI, PCM, and SPI options permit different host partitioning arrangements. The 63 dB voice-band signal level and 3.3 V supply operation should be reconciled with the concentrator’s signal-loss budget and power budget. Designers should also plan isolated line-side routing and verify startup and shutdown behavior across all connected channels.
Empfohlen
Digital Loop Terminator
The SI3206-B-GQ can support a digital loop terminator that bridges subscriber-line voice traffic into a digital transport. A single two-channel device provides the line-facing SLIC and codec functions needed for each pair of channels, reducing board area compared with separate implementations. PCM connectivity is useful when the loop terminator accepts continuous digital voice frames, while SPI control supports configuration and status access. The 48-TQFP 7 mm by 7 mm package supports compact line cards, but careful layout must keep sensitive line-side nodes away from switching and high-current return paths.
Empfohlen
Voice-over-IP Line Interface
SI3206-B-GQ is well suited to the analog front end of a voice-over-IP terminal because it combines two-channel line processing and codec conversion in one 3.3 V device. The integrated architecture can shorten the path between subscriber copper pairs and the system’s digital voice engine while retaining flexible GCI, PCM, or SPI host connectivity. Its two-channel organization is valuable in IP phones, analog terminal adapters, and small PBX line cards. Designers should evaluate echo-related performance, codec delay, line gain calibration, and electrical protection before selecting the device, using the manufacturer’s recommended network and filtering approach.
Empfohlen
Carrier Voice Line Card
SI3206-B-GQ can be used in a carrier voice line card where two subscriber channels are conditioned and converted for central-office transport. Its integrated SLIC and codec functions simplify the voice path, and the 45 mA operating-current specification provides a starting point for power-budget analysis. GCI, PCM, and SPI interfaces allow the line card to match its control and transport architecture. Production designs should verify external line voltage, surge protection, thermal rise, and channel timing against regional telecom requirements rather than relying on general-purpose interface assumptions.
Empfohlen
PCM-Based Voice Terminal
The SI3206-B-GQ fits a PCM-based voice terminal in which analog subscriber lines must be linked to a digital PCM stream. Integrating the codec with the SLIC reduces the number of interfaces and conversion stages on the voice path, while the 48-TQFP package keeps the solution compact for surface-mount terminal hardware. PCM can carry the two channels efficiently when the host processor is synchronized to the device. Clock quality, frame alignment, active levels, and gain calibration must be checked against the host design. Line protection and filtering remain essential because the subscriber line operates under conditions unlike ordinary short-range digital interconnects.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SI3206-B-GQ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Package | 48-TQFP, 7 mm x 7 mm |
| Brand | Skyworks Solutions Inc. |
| Product Type | SLIC and CODEC |
| Number of Channels | 2 channels |
| Supply Voltage | 3.3 V |
| Operating Current | 45 mA |
| Voice Signal Level | 63 dB |
| GCI Interface | Supported |
| PCM Interface | Supported |
| SPI Interface | Supported |
| Mounting Type | Surface mount |
| Lead-Free Configuration | Yes |
Wichtigste Unterscheidungsmerkmale
- Integrated two-channel SLIC and codec (vs. SI3203-B-GQ)
- Three digital connectivity options (vs. SI3203-B-GQ)
- Compact surface-mount implementation (vs. Discrete SLIC and codec implementation)
Designhinweise
Route the subscriber-line, digital-interface, and supply paths according to the manufacturer’s recommended layout rather than treating the device as a general-purpose mixed-signal IC. Keep the line-side node as short and isolated as practical, maintain the required bypass-capacitor connections directly at the relevant supply pins, and preserve continuous ground-return paths. The 48-TQFP footprint has enough pin density to separate sensitive line-side routing from SPI and PCM activity if the recommended placement is followed.
Begin the power budget with the specified 45 mA operating current at a 3.3 V supply, then add the dissipation associated with line-side circuitry and external support components. Estimated: 3.3 V multiplied by 45 mA equals 148.5 mW for the stated operating condition. This is an operating-point calculation rather than a maximum-power rating, so thermal design must also cover worst-case current, supply tolerance, adjacent-source heating, and the maximum ambient temperature permitted by the manufacturer.
Separate the GCI, PCM, and SPI digital interfaces from the subscriber-line section to minimize coupling into voice signals. Use a continuous ground plane where appropriate, place bypass capacitors at their associated power pins, and avoid routing high-current return paths beneath the codec or line-side input nodes. Check every unused pin against the manufacturer’s pin-description table because no-connect, test, and configuration functions must not be assigned arbitrarily.
Do not substitute the related SI3203-B-GQ or SI3206-B-GMR solely because the family name is similar. Confirm the 48-TQFP body size, complete pin map, channel count, GCI and PCM timing, SPI configuration register map, supply limits, and line-side electrical characteristics for the exact suffix. A family-level match is not sufficient evidence of drop-in compatibility, and PCB redesign may be necessary if interfaces or package details differ.
Compliance-Informationen
The GMR-related manufacturer listing identifies the family as lead-free, and the GQ suffix is associated with a lead-free ordering configuration. No explicit RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for the exact MPN.