SN65HVD255DR - 1Mbps Turbo CAN Transceiver | TI
Teilenummer: SN65HVD255DR ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $1.85 | $1,85 |
| 10 | $1.67 | $16,70 |
| 100 | $1.39 | $139,00 |
| 500 | $1.25 | $625,00 |
| 1.000 | $1.12 | $1.120,00 |
SN65HVD255DR Übersicht
A CAN transceiver is the physical-layer interface between a CAN protocol controller and the twisted-pair bus, converting controller TXD/RXD logic signals into differential CANH/CANL signals. Within the CAN system hierarchy (application layer, protocol controller, transceiver, bus), the transceiver provides the drive strength, common-mode tolerance, and ESD/fault robustness required for reliable communication in harsh electrical environments.
Key features include fast loop propagation times that enhance timing margins on long, heavily loaded networks; functional-safety-oriented features per the TI datasheet; dominant and recessive output drive compliant with ISO 11898-2; and internal protection including thermal shutdown and short-circuit current limiting. The device operates from a nominal 5V supply. Low electromagnetic emission and high immunity make it suitable for demanding automotive and industrial buses.
Typical applications include industrial automation and motor drives, building and climate control automation, security systems, and telecom base station status and control networks. In these systems the Turbo CAN fast loop times allow more nodes, longer cable runs, or higher bit rates than standard transceivers.
When designing with the SN65HVD255DR, terminate both bus ends with 120-ohm resistors, place a 0.1uF bypass capacitor close to VCC, and keep the CANH/CANL traces symmetric and short to preserve signal integrity at extended data rates.
Drop-in-Alternativen für SN65HVD255DR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit SN65HVD255DR (gleiche Bauform und Footprint) – abweichend in Data Rate, Duplex, Function, Package, Protocol.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
SN65HVD256DR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SN65HVD255QDRQ1
✅ Drop-In✓ Auf Lager
$0.94 / Stück
Datenblatt ansehen →SN65HVD251DR
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
TCAN1057A-Q1
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TJA1051T/3/1
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$0.4102 / Stück
Datenblatt ansehen →MCP2551-E/SN
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
SN65HVD255DR Technische Daten
| Funktion | CAN Transceiver |
| Protocol | CANbus (ISO 11898-2) |
| Datenrate | In excess of 1 Mbps |
| Versorgungsspannung | 5 V nominal |
| Drivers/Receivers | 1/1 |
| Duplex | Half |
| Loop Time | Fast loop times (Turbo CAN) |
| Betriebstemperatur | -40C to +125C |
| Gehäuse | 8-SOIC (D) |
| Montageart | Surface Mount |
| Protection | Thermal shutdown, short-circuit current limiting |
| Family | SN65HVD25x Turbo CAN |
| Reel Size | Standard 2500 units per reel (T/R) |
| RoHS-Status | Compliant |
SN65HVD255DR Pin-Konfiguration
| Pin 1 | TXD — Transmit data input from CAN controller |
| Pin 2 | GND — Ground reference |
| Pin 3 | VCC — 5V supply; place 0.1uF bypass capacitor close to pin |
| Pin 4 | RXD — Receive data output to CAN controller |
| Pin 5 | VREF — Reference voltage output (family-defined; verify per datasheet SLLSE76) |
| Pin 6 | CANL — Low-level CAN bus line |
| Pin 7 | CANH — High-level CAN bus line |
| Pin 8 | RS — Slew-rate select / mode control pin |
Typische Anwendungen
SN65HVD255DR ist geeignet für 6 Anwendungs: Industrial Automation and Motor Drives, Building and Climate Control Automation, Automotive Body and Powertrain Networks, Telecom Base Station Control, Security and Surveillance Systems, Medical Equipment Interconnect.
Industrial Automation and Motor Drives
The SN65HVD255DR fits industrial automation and motor-drive CAN buses where nodes are many and cable runs are long: its Turbo CAN fast loop times restore timing margin at data rates above 1 Mbps, when standard transceivers would accumulate too much propagation delay. Positioned between the MCU CAN controller TXD/RXD and the twisted-pair bus, it drives CANH/CANL per ISO 11898-2 with short-circuit current limiting and thermal shutdown protecting against bus faults. With both bus ends terminated at 120 ohms, the enhanced timing margin supports more nodes and longer trunks than conventional transceivers in the same 8-SOIC footprint.
Empfohlen
Building and Climate Control Automation
HVAC and building-management networks commonly use CAN at 125 kbps to 1 Mbps across long, heavily loaded cabling, exactly where the SN65HVD255DR's fast loop times add margin. The transceiver converts the controller's logic-level TX/RX into differential bus signals, tolerating ground shifts common in multi-room installations, and its -40C to +125C range suits rooftop and mechanical-room environments. Thermal shutdown and current limiting protect against wiring faults during installation. Because it operates from a 5V rail standard in industrial control panels, no extra level-shifting supply is required, simplifying BOM and panel design.
Empfohlen
Automotive Body and Powertrain Networks
For automotive CAN segments requiring speed, the SN65HVD255DR provides ISO 11898-2 high-speed signaling with low electromagnetic emission, important for passing CISPR-style EMC testing on body and powertrain buses. Its fast loop times help maintain bit timing on long harnesses with many ECUs, and the -40C to +125C operating range covers underhood and chassis environments. For formal AEC-Q100 programs, the identical-die SN65HVD255QDRQ1 variant should be specified. Designers upgrading toward CAN FD can drop in the pin-compatible TCAN1057A-Q1 without PCB change, protecting the layout investment.
Empfohlen
Telecom Base Station Control
Base station status-and-control backplanes frequently carry CAN across multi-card shelves, creating long, highly loaded networks. The SN65HVD255DR's fast loop times and >1Mbps capability give the timing margin needed to keep bit-rate and cable-length budgets positive at high node counts, which conventional transceivers cannot match. Its short-circuit limiting protects cards during hot-swap and maintenance, while low emissions prevent interference with sensitive RF front ends. Powered from the standard 5V shelf supply, it drops into any 8-SOIC footprint, and the 120-ohm backplane termination convention applies unchanged.
Empfohlen
Security and Surveillance Systems
Large security installations use CAN to link door controllers, sensors, and camera-control units over long cable runs. The SN65HVD255DR's enhanced timing margin allows more nodes per segment at higher bit rates than standard transceivers, reducing repeater count in multi-floor systems. Its differential receiver with common-mode tolerance resists the electrical noise of access-control locks, motors, and lighting loads sharing conduits. Thermal shutdown and current-limit protection guard against bus shorts from miswiring during field installation, and the wide -40C to +125C range suits outdoor enclosures and unconditioned spaces without derating the communication budget.
Empfohlen
Medical Equipment Interconnect
CAN remains popular inside medical devices for linking motor controllers, sensor boards, and HMI panels, because its differential signaling is robust in electrically noisy environments around switching power stages. The SN65HVD255DR's fast loop times keep timing margin intact on the long flex and cable routes inside large imaging and lab equipment, while its deterministic dominant/recessive signaling supports the priority-based arbitration CAN provides for safety-relevant messages. Operating on a simple 5V rail with built-in thermal and short-circuit protection, it reduces component count on densely packed control boards with no extra protection devices needed.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SN65HVD255DR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SN65HVD256DR | SN65HVD255QDRQ1 | TJA1051T | MCP2551-E/SN |
|---|---|---|---|---|---|
| Package | 8-SOIC (D) | 8-SOIC (D) - same | 8-SOIC (D) - same | 8-SOIC - same footprint | 8-SOIC - same footprint |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | NXP Semiconductors | Microchip Technology |
| Data Rate | >1 Mbps (Turbo CAN) | >1 Mbps | >1 Mbps | up to 5 Mbps (CAN FD tolerant) | 1 Mbps |
| Fast Loop Times | Yes (Turbo CAN) | Yes | Yes | Standard | No |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| CAN FD Support | No (Classic CAN) | No | No | No (TJA1051T/3 partial) | No |
Wichtigste Unterscheidungsmerkmale
- Turbo CAN fast loop times (vs. MCP2551-E/SN)
- AEC-Q100 qualified variant available (vs. SN65HVD256DR)
- Pin-compatible CAN FD upgrade path (vs. TJA1051T)
Designhinweise
Place a 0.1uF ceramic bypass capacitor as close as possible to the VCC pin (pin 3) with a solid ground return to pin 2. Keep CANH and CANL traces symmetric, matched in length, and short to the connector to preserve differential balance and minimize emissions at extended data rates. Route TXD/RXD away from CANH/CANL to avoid coupling transients into controller logic.
Terminate both physical ends of the bus with 120-ohm resistors matching the cable characteristic impedance. Stub lengths to intermediate nodes should be kept short (typically <0.3 m at 1 Mbps) since reflections accumulate quickly on >1 Mbps Turbo CAN networks. Use twisted-pair cable (nominal 120-ohm differential impedance) to reject common-mode noise in industrial environments.
The RS pin (pin 8) controls slew-rate/mode behavior - do not leave it floating; configure it per the TI SN65HVD255 datasheet (SLLSE76) to meet your EMC versus loop-speed trade-off. Verify VREF pin handling when substituting family members such as SN65HVD256DR, as protection-feature and timeout differences exist even though the pinout matches. Never exceed the 5V supply ratings or omit short-circuit protection review for bus fault conditions.
Compliance-Informationen
RoHS compliance and lead-free assembly per standard TI SOIC (D) product offering; verify REACH and halogen-free status on TI.com product page for SN65HVD255DR.
