SP3232EUCT-L/TR - 2/2 RS-232 Transceiver | MaxLinear
Teilenummer: SP3232EUCT-L/TR ✓ AktivSP3232EUCT-L/TR Übersicht
An RS-232 transceiver is an interface IC that combines voltage-level conversion, drivers, and receivers to connect modern low-voltage digital logic with legacy RS-232 equipment. The SP3232EU family provides a practical bridge between UART controllers and serial peripherals, printers, industrial instruments, and point-of-sale terminals. Its compact surface-mount package supports automated assembly while avoiding a separate external RS-232 line-driver circuit.
Principal features include two transmit drivers and two receive receivers, operation from one 3 V to 5.5 V supply, and a maximum data transmission rate of 1000 kbps. The internal charge-pump design supplies the bipolar voltage levels required by RS-232 without a separate negative supply. At 3.3 V, the charge pump requires only 0.1 µF capacitors, reducing external component count and helping conserve board space in portable equipment.
The SP3232EUCT-L/TR is the tape-and-reel ordering form of the SP3232EUCT-L device. Its 16-SOIC package is suitable for reflow assembly and volume manufacturing. The suffix /TR identifies tape-and-reel packing, while U identifies the electrical and temperature configuration and L identifies the lead-free ordering option. Design engineers should use the manufacturer pin-description table when assigning connector-side and logic-side nets.
Typical applications include notebook and palmtop computer serial ports, portable data-collection equipment, industrial serial adapters, barcode scanners, point-of-sale terminals, and embedded diagnostic interfaces. The device is especially useful where a low-voltage UART must connect to an RS-232 port using one compact transceiver rather than discrete level-shifting circuitry.
The principal design considerations are external capacitor selection, signal grounding, and RS-232 protection. Place the charge-pump capacitors and interface bypass capacitors close to their specified pins, and route the RS-232 traces away from sensitive analog or high-speed digital nets. The receive path should also be evaluated for system-level ESD protection where cables leave the enclosure.
This page combines the manufacturer device information, practical package and application guidance, drop-in replacement considerations, and design notes intended to shorten component-selection and PCB-integration time.
Drop-in-Alternativen für SP3232EUCT-L/TR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit SP3232EUCT-L/TR (gleiche Bauform und Footprint) – abweichend in Package, Data Rate, Interface Standard, Operating Temperature, Supply Voltage Range.
SP3232EET-L/TR
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →SP3232EECT-L/TR
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
SP3232EEY-L/TR
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →TRSF3232EIDW
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SP3232EUCT-L/TR Technische Daten
| Driver Count | 2 drivers |
| Receiver Count | 2 receivers |
| Transceiver Configuration | 2/2 full RS-232 |
| Supply Voltage Range | 3 V to 5.5 V |
| Datenrate | 1000 kbps |
| Power Supply Architecture | High-efficiency charge-pump supply |
| Charge-Pump Capacitor Value at 3.3 V | 0.1 µF |
| Interface Standard | RS-232 |
| Gehäuse | 16-SOIC |
| Package Width | 7.50 mm |
| Montageart | Surface mount |
| Shipping Form | Tape and reel |
SP3232EUCT-L/TR 7.50 mm Pinbelegungsleitfaden
Pinbelegung für SP3232EUCT-L/TR (7.50 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SP3232EUCT-L/TR.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SP3232EUCT-L/TR ist geeignet für 6 Anwendungs: Portable Computer Serial Port, Industrial Serial Adapter, Point-of-Sale Terminal, Barcode Scanner Interface, Data Acquisition Equipment, Embedded Diagnostic Interface.
Portable Computer Serial Port
The SP3232EUCT-L/TR fits portable computers and handheld peripherals that need a compact RS-232 interface from a 3.3 V system. Its two drivers and two receivers support bidirectional UART links, while the 1000 kbps data rate accommodates high-speed serial traffic. The charge-pump supply needs only 0.1 µF capacitors in 3.3 V operation, reducing board area relative to a discrete RS-232 interface. Designers should follow the manufacturer reference circuit and preserve the device pin assignments shown in the datasheet.
Empfohlen
Industrial Serial Adapter
The SP3232EUCT-L/TR is suitable for compact industrial serial adapters that translate a low-voltage UART into RS-232. Its single 3 V to 5.5 V supply range simplifies system power, and the internal charge pump eliminates a separate negative rail. Two drivers and two receivers allow connection to RS-232 equipment without external level-shifting channels. For deployed equipment, add appropriate cable-side ESD protection and confirm the temperature rating of the selected suffix against the enclosure environment.
Empfohlen
Point-of-Sale Terminal
Point-of-sale terminals can use the SP3232EUCT-L/TR to bridge a host controller with legacy RS-232 peripherals such as receipt printers, scanners, or customer displays. The 16-SOIC package supports compact surface-mount construction, while the 1000 kbps capability provides sufficient link margin for common serial protocols. A single 3 V to 5.5 V rail simplifies power design, and the 0.1 µF charge-pump capacitors specified for 3.3 V operation minimize external component count.
Empfohlen
Barcode Scanner Interface
The SP3232EUCT-L/TR provides a practical interface between an embedded scanner controller and an RS-232 host. Two receivers allow monitoring of transmit and status paths when needed, and the 1000 kbps rated data rate is well suited to burst-oriented scanner traffic. Operating from one 3 V to 5.5 V source supports embedded and portable equipment. Keep the connector-side nets away from switching circuitry, and place external protection close to the user-accessible cable connector.
Empfohlen
Data Acquisition Equipment
Instrumentation and data-acquisition equipment can employ the SP3232EUCT-L/TR to connect a controller UART with an RS-232 instrument. The 16-SOIC outline keeps the interface compact, and the single-supply operation supports both 3.3 V and 5 V embedded systems. The 1000 kbps capability accommodates common laboratory and industrial control protocols. Engineers should use a solid common reference between logic and interface grounds while isolating the cable side where necessary.
Empfohlen
Embedded Diagnostic Interface
The SP3232EUCT-L/TR is useful for service and diagnostic ports on embedded equipment because it combines two drivers, two receivers, and the charge-pump supply in one 16-SOIC device. A system running from 3.3 V can avoid a separate negative supply, while the 1000 kbps rate supports firmware update and diagnostic traffic. Route the exposed RS-232 connector through suitable protection components and maintain consistent grounding between the board and connected service equipment.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SP3232EUCT-L/TR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SP3232EET-L/TR | SP3232EECT-L/TR | SP3232EEY-L/TR | TRSF3232EIDW |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | MaxLinear, Inc. | MaxLinear, Inc. | MaxLinear, Inc. | MaxLinear, Inc. | Texas Instruments |
Wichtigste Unterscheidungsmerkmale
- Compact single-supply charge-pump implementation (vs. SP3232EET-L/TR)
- High-speed RS-232 capability (vs. TRSF3232EIDW)
- Two transmitters and two receivers in one package (vs. SP3232EECT-L/TR)
Designhinweise
Place the charge-pump capacitors and local bypass capacitors close to the pins identified in the MaxLinear reference circuit. Keep the associated ground returns short and continuous, and avoid placing switching-regulator copper or high-current return paths beneath the transceiver. The 0.1 µF charge-pump value applies to 3.3 V operation; follow the manufacturer capacitor table when operating from another supply voltage.
Separate RS-232 connector traces from sensitive clocks, sensor inputs, and audio paths, particularly when the cable leaves the equipment enclosure. Use a continuous interface ground and route the signals with a return path that minimizes loop area. For high data rates, maintain controlled impedance where cable and board geometry permit, and verify the assembled interface with an oscilloscope before production release.
Do not assume that every 16-SOIC RS-232 transceiver has the same pinout. Check the driver outputs, receiver inputs, charge-pump terminals, enable functions, and exposed package details for the exact ordering suffix. Also distinguish the /TR tape-and-reel form from tube-packed variants when creating the assembly bill of materials and pick-and-place data.
Compliance-Informationen
The L suffix identifies the lead-free ordering option. Formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified in the cited product information.