SPC5602BK0VLH4R - 32-bit MCU 256KB Flash 48MHz LQFP-64 | NXP
Teilenummer: SPC5602BK0VLH4R ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $6.85 | $6,85 |
| 10 | $6.18 | $61,80 |
| 100 | $5.42 | $542,00 |
| 500 | $4.78 | $2.390,00 |
| 1.000 | $4.15 | $4.150,00 |
| 3.000 | $3.62 | $10.860,00 |
SPC5602BK0VLH4R Übersicht
A microcontroller (MCU) is an integrated circuit that combines a CPU, memory (Flash, SRAM), peripherals and I/O on a single die, serving as the central processing element in embedded systems. The MPC5602B is part of NXP's Qorivva MPC56xx family, which targets automotive body and industrial applications with hardware/software scalable from 256KB to 1MB Flash. Within the broader taxonomy, this device sits as MCU -> embedded microcontroller -> 32-bit microcontroller -> automotive-grade MCU -> power management companion, where it typically interfaces with sensor front-ends and low-side drivers.
Key features include 256KB on-chip Flash (256K x 8), 48 MHz maximum CPU frequency, 64-pin LQFP footprint (10x10 mm body), -40C to +105C operating temperature range, automotive-grade qualification, and integrated peripherals such as CAN, SPI, SCI (UART) and timers. The e200z0h core implements the Power Architecture Book E instruction set with single-precision FPU optional, providing deterministic interrupt latency required by ISO 26262 ASIL-B systems.
Typical applications include automotive body control modules (BCM), seat and mirror controllers, HVAC blowers, lighting modules, instrument cluster sub-controllers, and industrial PLC sub-units. The wide 5V-tolerant I/O simplifies interfacing with legacy sensors and actuators designed for 12V/5V automotive buses.
When designing with this device, allocate decoupling capacitance per the reference manual and reserve the JTAG pins (TCK, TMS, TDI, TDO, /RESET) for boundary-scan or in-circuit programming access. Engineers migrating from older MPC551x or HC08 designs benefit from NXP's code-compatibility and the extensive automotive software ecosystem (AUTOSAR MCAL, OSEK/VDX, CodeWarrior, S32 Design Studio).
This page synthesizes distributor stock, validated drop-in alternatives within the MPC560x family, and practical design notes not found in the standalone manufacturer datasheet.
Drop-in-Alternativen für SPC5602BK0VLH4R – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
SPC5602BK0CLL6
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SPC5603BK0MLL6
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SPC5604BK0MLL6
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SPC5602BK0VLH4R Grenzwerte & elektrische Eigenschaften
| Core Architecture | Power Architecture e200z0h |
| CPU Core | 32-bit RISC |
| Family | MPC56xx Qorivva (MPC5602B) |
| Maximum CPU Frequency | 48 MHz |
| Program Memory (Flash) | 256 KB (256K x 8) |
| Versorgungsspannung | 3.3 V / 5 V |
| Betriebstemperaturbereich | -40 C to +105 C |
| Gehäuse | 64-LQFP (10x10 mm) |
| Montageart | Surface Mount |
| Automotive Grade | Yes |
| Communication Interfaces | CAN, SPI, SCI (UART) |
| RoHS-Status | Compliant |
SPC5602BK0VLH4R 64-lqfp (10x10 mm) Pinbelegungsleitfaden
Pinbelegung für SPC5602BK0VLH4R (64-lqfp (10x10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für SPC5602BK0VLH4R.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SPC5602BK0VLH4R ist geeignet für 6 Anwendungs: Automotive Body Control Module (BCM), HVAC Blower and Climate Controller, Automotive Lighting Module (Headlamp / Tail Lamp), Industrial PLC Sub-Unit / Sensor Hub, Seat and Mirror Controller, Instrument Cluster Sub-Controller.
Automotive Body Control Module (BCM)
The SPC5602BK0VLH4R is well-suited for body control modules where the e200z0h core delivers deterministic interrupt response required for CAN-based body networking. With 256 KB Flash it can host AUTOSAR MCAL plus a slim application layer for door, lighting and wiper control, while the 64-LQFP footprint drops directly onto BCM PCBs designed around the 10x10 mm land pattern. Automotive Grade-1 (-40C to +105C) and 5V-tolerant I/O simplify interfacing with legacy 12V body sensors and actuator drivers.
Empfohlen
HVAC Blower and Climate Controller
For HVAC blower motors and climate-zone sub-controllers, the SPC5602BK0VLH4R delivers 48 MHz of deterministic CPU bandwidth to run PWM motor control loops while simultaneously servicing CAN and LIN communication. Its 256 KB Flash holds typical HVAC calibration tables, and the 64-LQFP package simplifies thermal management in-cabin. The 5V-tolerant I/O ports interface directly to legacy NTC temperature sensors, blower relays and stepper-motor drivers without level translation.
Empfohlen
Automotive Lighting Module (Headlamp / Tail Lamp)
In LED headlamp and tail-lamp controllers, the SPC5602BK0VLH4R's PWM-capable timers and 5V-tolerant GPIO can drive FET arrays directly for matrix-LED or sequential-turn applications. 256 KB Flash supports dimming tables and matrix-beam algorithms; the 64-LQFP footprint accommodates compact lamp ECU designs. AEC-Q100 automotive qualification and the -40C to +105C range cover under-hood and exterior lamp housing thermal profiles.
Empfohlen
Industrial PLC Sub-Unit / Sensor Hub
The SPC5602BK0VLH4R operates reliably as an industrial sensor hub or PLC sub-unit thanks to its 48 MHz e200z0h core, integrated CAN, SPI and SCI interfaces, and -40C to +105C rating. With 256 KB Flash it hosts Modbus, CANopen or proprietary protocols, and the 64-LQFP package eases through-hole or surface-mount assembly on industrial backplanes. 5V tolerance simplifies retrofit into existing 24V factory-bus systems.
Empfohlen
Seat and Mirror Controller
For power seat and side-mirror controllers, the SPC5602BK0VLH4R's PWM timers and CAN interface suit multi-axis memory-position motors and mirror-fold actuators. The 256 KB Flash fits position tables and diagnostic routines; 64-LQFP allows compact placement inside door modules. AEC-Q100 grade and 5V I/O tolerance match the noisy 12V body-bus environment with minimal external protection circuitry.
Empfohlen
Instrument Cluster Sub-Controller
As a sub-MCU behind a main cluster processor, the SPC5602BK0VLH4R handles stepper-motor gauges, tell-tale LEDs and CAN diagnostics while the host GPU focuses on HMI. Its 256 KB Flash accommodates tell-tale logic and diagnostic fault codes; the 64-LQFP footprint suits densely populated cluster boards. The 48 MHz e200z0h core provides deterministic response to CAN messages without taxing cluster responsiveness.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SPC5602BK0VLH4R – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SPC5602BK0CLL6 | SPC5603BK0MLL6 | SPC5604BK0MLL6 |
|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors - same | NXP Semiconductors - same | NXP Semiconductors - same |
| Core | Power Architecture e200z0h | e200z0h | e200z0h | e200z0h |
| Max CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 256 KB | 256 KB | 384 KB (+50%) | 512 KB (+100%) |
| Supply Voltage | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C |
| Automotive Grade | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) |
| Approx Unit Price @ 1k | USD 4.15 | USD 4.15 | USD 4.45 | USD 4.75 |
Wichtigste Unterscheidungsmerkmale
- Smallest 64-LQFP footprint in the MPC5602B family (vs. SPC5602BF2MLL6)
- Code compatibility with full MPC560xB family (vs. MKL16Z256VLH4 (NXP ARM Cortex-M0+))
- Automotive Grade-1 with 5V tolerance (vs. SPC5602BK0VLQ4 (144-LQFP))
Designhinweise
Estimated: at 48 MHz CPU and 5V supply with 100 mA core current, the SPC5602BK0VLH4R dissipates roughly 0.5 W. Add 10 uF + 100 nF decoupling within 5 mm of every VDD/VSS pair; NXP recommends one bulk cap per supply rail and a 100 nF per pin. For 5V-only designs verify that the 5V-tolerant I/O is configured in the SIU_PCR registers to prevent back-drive damage during power-up sequencing.
The 64-LQFP package has a 0.5 mm lead pitch. Use 0.2 mm trace-and-space design rules and place all decoupling capacitors on the inner signal layer directly under the package pins. Keep the JTAG chain (TCK/TMS/TDI/TDO) routed as a daisy-chain with 33 ohm series termination at the driving end to avoid reflection-induced programming failures during boundary-scan.
Do not confuse the SPC5602BK0VLH4R (64-LQFP, suffix VLH) with SPC5602BK0VLQ4 (144-LQFP, suffix VLQ). They share the same prefix but use different footprints - cross-reference the package-suffix before PCB layout. Also note the trailing 'R' denotes Tape-and-Reel packaging only; the silicon is identical to the tray-packaged SPC5602BK0VLH4.
Estimated: at 0.5 W dissipation with a 64-LQFP theta_JA of approximately 50 C/W on a 4-layer JEDEC test board, the junction rises about 25 C above ambient. For under-hood applications pushing ambient to 105 C, ensure copper-pour area under the exposed pad or add a top-side copper fill to keep Tj below 125 C - check NXP AN4836 for layout guidance.
Compliance-Informationen
AEC-Q100 Grade-1 automotive qualification per NXP. RoHS and REACH compliant per distributor listings. Halogen-free status not explicitly stated in verified web data; request NXP material declaration for confirmation.