SR-MT9041A-R - Matter over Thread + ZigBee 1CH Smart Relay | Sunricher
Teilenummer: SR-MT9041A-R ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.2 | $252,00 |
| 100 | $22.1 | $2.210,00 |
| 500 | $19.8 | $9.900,00 |
| 1.000 | $17.95 | $17.950,00 |
SR-MT9041A-R Übersicht
A Matter over Thread + ZigBee Dual Tech Smart Relay Module is a wireless, behind-the-switch actuator that combines a low-power IEEE 802.15.4 radio (Thread) with a ZigBee 3.0 stack so the same in-wall module can join either a Matter fabric or a legacy ZigBee network. These dual-protocol modules sit in the smart-home device hierarchy between a basic ZigBee relay and a pure Matter device, and they belong to the broader category of in-wall smart switches and lighting controllers used for retrofit and new-build residential automation.
Key features of the SR-MT9041A-R include 100-240 Vac universal input, switched 100-240 Vac output, 4.3 A resistive / 1.7 A capacitive-inductive load rating, 3 W standby power consumption, screw-terminal input and output wiring, integrated active power and energy metering, overload and overheat protection, and Touchlink commissioning plus ZigBee Green Power kinetic-switch support. App control is delivered through Matter-certified ecosystems such as Apple Home, Amazon Alexa, and Google Home, and the module supports both remote app control and local push-button control from a traditional wall switch.
From an architectural standpoint, the dual-protocol radio design uses shared 2.4 GHz IEEE 802.15.4 silicon running concurrent Thread and ZigBee 3.0 protocol stacks, with onboard firmware selecting the active commissioning path during provisioning. The internal switching element is a bistable or latching relay suitable for 100-240 Vac mains, and the metering chain is a shunt-plus-SoC ADC that reports active power and cumulative energy back to the gateway for energy-monitoring dashboards.
Typical applications include retrofit ON/OFF control of ceiling luminaires, wall sconces, exhaust fans, and smart outlets in residential and hospitality installations. Because the module fits behind a conventional wall switch and is rated for the European 100-240 Vac mains, it is well suited to whole-home Matter deployments where consumers want app, voice, and physical-switch control of the same load without rewiring.
When designing with the SR-MT9041A-R, confirm that the connected load stays within the 4.3 A resistive or 1.7 A capacitive/inductive derating curve and that the wall box provides adequate volume for the module's 0.1 kg plastic housing and heat dissipation at full load.
This page synthesizes Sunricher manual data, distributor pricing, and protocol-level drop-in alternatives not collated in any single manufacturer datasheet.
Drop-in-Alternativen für SR-MT9041A-R – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit SR-MT9041A-R (gleiche Bauform und Footprint) – abweichend in Case Material, Output Voltage, Product Type, Energy Metering, Mounting.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
SR-MT9041A-2R
✅ Drop-In✓ Auf Lager
$20.5 / Stück
Datenblatt ansehen →SR-ZG9041A-R
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
SR-MT9041A-R
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$17.95 / Stück
Datenblatt ansehen →SR-MT9041A-R Grenzwerte & elektrische Eigenschaften
| Product Type | Matter over Thread + ZigBee Dual Tech Smart Relay Module |
| Kanäle | 1 (single channel) |
| Input Voltage | 100-240 Vac |
| Ausgangsspannung | 100-240 Vac |
| Max Load Current (Resistive) | 4.3 A |
| Max Load Current (Capacitive / Inductive) | 1.7 A |
| Standby Power Consumption | 3 W |
| Wireless Protocol | Matter over Thread + ZigBee 3.0 Dual Tech |
| Radio Frequency | 2.4 GHz IEEE 802.15.4 |
| Commissioning | App control, Touchlink, Green Power kinetic switch |
| Energy Metering | Active power and energy reporting |
| Protection Features | Overload and overheat protection |
| Terminal Type | Screw terminals (input and output) |
| Case Material | Plastic |
| Product Weight | 0.1 kg |
| Installation | In-wall (behind standard wall switch / wall box) |
SR-MT9041A-R plastic Pinbelegungsleitfaden
Pinbelegung für SR-MT9041A-R (plastic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SR-MT9041A-R.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SR-MT9041A-R ist geeignet für 6 Anwendungs: Retrofit ON/OFF Control of Ceiling Luminaires, Smart Exhaust Fan Control in Bathrooms, Hospitality Room Smart Switch Retrofit, Garden and Outdoor Lighting Automation, Voice-Controlled Wall Outlets via Matter, Whole-Home Matter Fabric Rollout.
Retrofit ON/OFF Control of Ceiling Luminaires
The SR-MT9041A-R fits behind an existing wall switch to convert a conventional ceiling luminaire into a Matter- or ZigBee-controllable smart light. Its 4.3 A resistive rating comfortably drives a 230 Vac LED fixture drawing up to ~990 W, while the 3 W standby power is negligible compared with the load. Energy metering lets the homeowner see real-time consumption in Apple Home, Alexa, or Google Home, and the screw-terminal wiring avoids re-running neutral in many retrofits.
Empfohlen
Smart Exhaust Fan Control in Bathrooms
The 1.7 A capacitive/inductive rating of the SR-MT9041A-R covers typical 230 Vac bathroom exhaust fans (30-80 W inductive load) without contact welding, while the overload and overheat protection trips safely if the fan stalls. Installed behind the fan switch, the module joins the home's Matter fabric so the fan can be scheduled or humidity-automated from the homeowner app. The plastic in-wall housing tolerates the warm, humid environment of a bathroom ceiling box when mounted per the manual.
Empfohlen
Hospitality Room Smart Switch Retrofit
Hotels and serviced apartments use the SR-MT9041A-R to retrofit bedside lamps and reading lights behind existing switches, with the Matter over Thread radio integrating into Apple Home for iPad-based room-control dashboards. The 100-240 Vac input handles global mains standards, so the same SKU ships across EU, UK, and APAC properties. Energy metering enables per-room billing, and the 3 W standby keeps vampire load low across hundreds of rooms.
Empfohlen
Garden and Outdoor Lighting Automation
Installed in an IP-rated junction box, the SR-MT9041A-R schedules low-voltage garden lighting transformers and 230 Vac path lights through Matter or ZigBee schedules and astronomical timers. The 1.7 A capacitive/inductive figure covers magnetic and electronic LED-driver transformers, and the overload protection trips on transformer inrush faults. Dual-protocol radio ensures the outdoor device can join the same Matter fabric as indoor modules despite long RF paths.
Empfohlen
Voice-Controlled Wall Outlets via Matter
Behind a standard European wall outlet, the SR-MT9041A-R switches the outlet's live feed so any plugged appliance becomes Alexa- or Google-Assistant-controllable. Its 4.3 A resistive rating handles heaters, fans, and aquarium pumps, while the 1.7 A capacitive/inductive figure covers small transformer-fed loads. The Touchlink commissioning path also lets installers pair the module with a kinetic ZigBee Green Power wall switch for retrofit scenarios without running new switch wiring.
Empfohlen
Whole-Home Matter Fabric Rollout
For new-build and major-renovation Matter deployments, the SR-MT9041A-R is the workhorse behind every switch box, providing one channel of switched mains per gang. Its Matter-over-Thread radio bridges to a Thread Border Router (Apple HomePod, Nest Hub, or Aqara M3), and the ZigBee 3.0 fallback keeps the module useful during the transition window. With 100-240 Vac universal input, the same SKU rolls out across multi-region developments without re-qualifying variants.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SR-MT9041A-R – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | SR-MT9041A-2R | SR-ZG9041A-R | SR-MT9041A-R (Touchlink variant) |
|---|---|---|---|---|
| Brand | Sunricher | Sunricher | Sunricher | Sunricher |
| Package / Form Factor | In-wall plastic housing | In-wall plastic housing - same | In-wall plastic housing - same | In-wall plastic housing - same |
| Channels | 1 | 2 | 1 | 1 |
| Input Voltage | 100-240 Vac | 100-240 Vac | 100-240 Vac | 100-240 Vac |
| Output Voltage | 100-240 Vac | 100-240 Vac | 100-240 Vac | 100-240 Vac |
| Max Load Current (Resistive) | 4.3 A | 5 A per channel | 4.3 A | 4.3 A |
| Wireless Protocol | Matter over Thread + ZigBee 3.0 Dual Tech | Matter over Thread + ZigBee 3.0 Dual Tech | ZigBee 3.0 only | Matter over Thread + ZigBee 3.0 Dual Tech |
| Energy Metering | Yes (active power + energy) | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Dual-protocol radio on a single 2.4 GHz chip (vs. SR-ZG9041A-R)
- Integrated energy metering without external CT clamp (vs. SR-MT9041A-2R)
- 100-240 Vac universal input for global deployment (vs. Regional 120 Vac or 230 Vac-only modules)
Designhinweise
Estimated: at 230 Vac full resistive load of 4.3 A, the SR-MT9041A-R switches approximately 989 W. For LED driver or inductive loads (ceiling fan, transformer) the safe continuous current is the 1.7 A capacitive/inductive figure, which corresponds to about 391 W at 230 Vac. Always size the connected load to the lower of the two ratings and add 25% margin for inrush.
The plastic in-wall housing has limited heatsinking; at full 4.3 A resistive load the relay contacts and surrounding PCB dissipate several watts of contact-I^2R loss. Per the Sunricher manual, ensure the wall box volume is not fully enclosed by insulation and that ambient temperature at the box stays below the relay's derating curve. Avoid mounting two SR-MT9041A-R modules in the same back-to-back wall box.
Do not connect the switched output (L') to a load that exceeds the 1.7 A capacitive/inductive rating, even if the resistive figure of 4.3 A appears to allow it; LED drivers and small transformers draw high inrush that welds the relay contacts. Always wire Neutral to the module's N terminal - the SR-MT9041A-R requires a neutral for the radio and metering circuits.
Inside the wall box, keep the 230 Vac screw-terminal wiring as short as possible and route the antenna side of the PCB away from mains conductors to preserve 2.4 GHz radio range. Per the Sunricher manual, do not place the module inside metal wall boxes without external antenna provisions - the Thread/ZigBee range will collapse.
Compliance-Informationen
Compliance certifications are not published on the Sunricher product page or manual PDF reviewed. Matter certification status should be confirmed at https://csa-iot.org/certified-products/ before specifying for production deployments.
