STM32F102R8T6 - 48MHz Cortex-M3 USB MCU | STMicroelectronics
Teilenummer: STM32F102R8T6 ✓ AktivSTM32F102R8T6 Übersicht
A microcontroller is an integrated semiconductor that executes embedded software, manages digital inputs and outputs, and provides dedicated resources for communication, timing, and control. The STM32F102 series is positioned between general-purpose STM32F1 devices and USB-focused applications. Its Arm Cortex-M3 core uses a Harvard architecture with an instruction pipeline designed for efficient interrupt-driven control. Within the broader hierarchy, it is a microcontroller, embedded processor, semiconductor, and connected control component.
Key characteristics include a maximum operating frequency of 48 MHz, 64 KB of programmable Flash, and USB full-speed access. The 64-pin LQFP package provides enough external pins for USB connectivity, clocking, reset, programming, and application-specific interfaces while remaining compatible with conventional PCB assembly methods. The STM32F102R8T6 is identified as a medium-density member of the STM32F102xx line, which is organized around high-performance Cortex-M3 operation and USB-oriented connectivity.
The STM32F102R8T6 is intended for applications where a conventional STM32F1 microcontroller requires USB rather than a larger high-density device. Its 64 KB Flash capacity is suitable for moderate control firmware, boot logic, configuration data, and USB communication routines. Clocking, memory access, peripheral resources, electrical limits, and the exact pin assignments should be selected from the manufacturer datasheet for the complete STM32F102xx device family before the PCB is released.
Typical use cases include USB-to-serial equipment, data loggers, industrial control modules, configuration tools, and USB-connected embedded accessories. Its 48 MHz Cortex-M3 core provides useful processing headroom for event handling, protocol management, and peripheral coordination. USB full-speed support can simplify host-to-device communication without requiring a separate USB controller when the system already includes the required firmware and signal conditioning.
For PCB implementation, use the 64-pin LQFP land pattern and follow the manufacturer’s recommended decoupling, clock, reset, USB, and programming interfaces. Check the complete STM32F102xx pin-description table before assigning signals, especially because peripheral mapping and alternate-function details determine which features can be used simultaneously. Validate the power rails, clock stability, USB impedance, and firmware configuration during prototype testing.
This product page combines the manufacturer’s device description with package, memory, interface, sourcing, and migration information. It also organizes engineering guidance around the STM32F102R8T6’s USB role, 48 MHz performance, 64 KB Flash capacity, and practical alternatives for designs that need a second source or a related STM32 configuration.
Drop-in-Alternativen für STM32F102R8T6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit STM32F102R8T6 (gleiche Bauform und Footprint) – abweichend in Package, Flash Memory, ADC, Supply Voltage, Architecture.
STM32F103R8T6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32F101R8T6
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →STM32F102RET6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32F103RET6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$2.2148 / Stück
Datenblatt ansehen →GD32F103R8T6
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
STM32F102R8T6 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | STM32F102xx medium-density USB access line |
| Maximum CPU Frequency | 48 MHz |
| Core Architecture | Arm Cortex-M3 32-bit RISC |
| Flash Memory | 64 KB (64K x 8) |
| Architecture | 32-bit |
| USB Interface | USB full-speed |
| Versorgungsspannung | 2.5 V to 3.3 V |
| Gehäuse | 64-pin LQFP |
| Package Type | Tray |
| Montageart | Surface mount |
STM32F102R8T6 tray Pinbelegungsleitfaden
Pinbelegung für STM32F102R8T6 (tray-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für STM32F102R8T6.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
STM32F102R8T6 ist geeignet für 6 Anwendungs: USB-to-Serial Data Adapter, Industrial Data Logger, USB Configuration and Programming Tool, USB Medical Accessory, USB Security and Access Controller, Connected Embedded Control Module.
USB-to-Serial Data Adapter
The STM32F102R8T6 fits USB-to-serial adapters because its STM32F102xx USB access-line architecture combines a 48 MHz Arm Cortex-M3 core with USB full-speed connectivity. The 64 KB Flash can hold a USB stack, command parser, and device-specific firmware without moving to a larger MCU. In a typical implementation, the USB interface communicates with a host while the serial peripheral bridges data to an external UART-equipped instrument. The LQFP package also provides a conventional 64-pin routing target. Firmware must configure clocks, USB clocks, and endpoints according to the manufacturer reference configuration. This is a platform-design example rather than a complete USB electrical specification.
Empfohlen
Industrial Data Logger
The STM32F102R8T6 can serve as the control processor in an industrial data logger that stores sensor records locally and exposes them through USB. Its 48 MHz Cortex-M3 core is suitable for coordinating sampling, timestamps, buffer management, and USB transfers, while 64 KB of Flash provides space for firmware and configuration data. Engineers can assign USART, SPI, timer, and GPIO resources for sensors and external memory according to the complete pin table. The 2.5 V to 3.3 V operating classification fits many embedded 3.3 V systems. For deployed equipment, validate the temperature range, EMC behavior, brownout conditions, and enclosure grounding before production release.
Empfohlen
USB Configuration and Programming Tool
The STM32F102R8T6 is appropriate for a USB-connected configuration tool that receives commands, validates settings, and controls a target board. The 48 MHz Cortex-M3 core allows responsive protocol handling and background work, while USB full-speed support removes the need for a separate USB bridge in designs that already include the appropriate firmware and connector circuitry. Its 64 KB Flash supports application code, command tables, and a bootloader-sized operational layer. A practical design can use GPIO for status LEDs and a UART for internal diagnostics. The 64-pin LQFP package simplifies inspection and rework, although USB impedance, ESD protection, power sequencing, and host compatibility remain essential validation items.
Empfohlen
USB Medical Accessory
The STM32F102R8T6 can support a USB medical accessory when its application-specific safety, electrical, and regulatory requirements are addressed separately. The 48 MHz Cortex-M3 processor provides control and USB communication capability, and the 64 KB Flash is suitable for compact accessory firmware. The 2.5 V to 3.3 V operating classification and 64-pin LQFP package align with many embedded accessory architectures. A typical implementation separates measurement, controls, and communications while keeping the USB interface isolated according to the applicable system requirements. Production use requires confirmation of temperature limits, ESD performance, electrical isolation, software validation, and applicable medical quality procedures; the MCU designation alone does not establish medical certification.
Empfohlen
USB Security and Access Controller
The STM32F102R8T6 is suitable for a compact USB security or access-control peripheral that exchanges commands with a host and supervises an attached lock, reader, or sensor. Its 48 MHz Arm Cortex-M3 core supports event processing, USB protocol handling, and peripheral coordination, while the 64 KB Flash supports a compact application image. GPIO, timers, and serial interfaces can be allocated for indicators, access events, and downstream controllers after pin multiplexing is confirmed. The 64-pin LQFP package provides sufficient routing flexibility for power, USB, programming, and control signals. Designers should validate host enumeration, unauthorized-device behavior, timing, tamper resistance, and recovery procedures before using it as a security boundary.
Empfohlen
Connected Embedded Control Module
The STM32F102R8T6 can act as the central controller in a small connected embedded module that manages local inputs and communicates with a host over USB. Its 48 MHz Cortex-M3 core and 64 KB Flash align with control firmware that coordinates timers, GPIO, serial devices, and USB endpoints. The 2.5 V to 3.3 V operating classification supports common embedded power architectures, while the 64-pin LQFP package allows a straightforward multilayer or two-layer layout when pin assignments are planned carefully. For an industrial module, use local filtering and protection around exposed inputs, confirm clock and reset behavior during power transitions, and test USB full-speed operation across the required host platforms. The MCU is suited to compact control rather than high-compute workloads.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32F102R8T6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32F103R8T6 | STM32F101R8T6 | STM32F102RET6 | STM32F103RET6 | GD32F103R8T6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice |
| Package | 64-pin LQFP | 64-pin LQFP - same | 64-pin LQFP - same | 64-pin LQFP - same | 64-pin LQFP - same | 64-pin LQFP - same |
| Maximum CPU Frequency | 48 MHz | 72 MHz | 36 MHz | 48 MHz | 72 MHz | 108 MHz |
| Core | Arm Cortex-M3 32-bit RISC | Arm Cortex-M3 32-bit RISC | Arm Cortex-M3 32-bit RISC | Arm Cortex-M3 32-bit RISC | Arm Cortex-M3 32-bit RISC | Arm Cortex-M3 32-bit RISC |
| Flash Memory | 64 KB | 64 KB | 64 KB | 128 KB | 128 KB | 64 KB |
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice |
| Relative Maximum Clock | 48 MHz baseline | 50% higher | 25% lower | Equal | 50% higher | 125% higher |
Wichtigste Unterscheidungsmerkmale
- Direct STM32F102 medium-density USB access-line positioning (vs. STM32F103R8T6)
- Lower-clock option with the same memory and package positioning (vs. STM32F101R8T6)
- More Flash memory available without changing the package footprint (vs. STM32F102RET6)
- Cross-brand second-source path with a documented pin-compatible family (vs. GD32F103R8T6)
Designhinweise
Route USB D+ and D- as a controlled-impedance differential pair and keep the path continuous from the STM32F102R8T6 pins to the connector. Follow the manufacturer’s USB routing guidance, minimize stubs and test pads, and provide the specified copper or plane reference. Place the USB transceiver and protection components close to the external connector so transient energy is diverted before reaching the MCU.
Use the STM32F102xx recommended power and decoupling arrangement for every supply pin. Confirm the exact operating voltage, regulator type, and decoupling values in the manufacturer documentation before fixing the power tree. A common 3.3 V rail can simplify the design, but the USB transceiver, transceiver I/O, pull resistors, and any external interface must remain within their respective voltage limits.
Assign pins from the complete STM32F102xx pin-description table rather than from an STM32F101 or STM32F103 board by name alone. Check each alternate function, debug connection, clock source, reset network, and boot configuration. Place the decoupling capacitors adjacent to their supply pins and reserve a clean clock path; route high-current outputs and USB differential signals away from sensitive analog inputs where practical.
Do not treat a shared 64-pin LQFP footprint as proof of drop-in operation. STM32F102R8T6 alternatives can differ in maximum clock, Flash capacity, USB behavior, peripheral population, and firmware support. Run a timing review, regenerate startup and linker settings, retest USB enumeration, and verify all pin-level functions before approving a replacement for production.
Compliance-Informationen
Compliance status requires confirmation from the current manufacturer product documentation or declaration for the exact ordering code.