STM32F410C8U6 - 100MHz Cortex-M4 MCU, 64KB Flash | STMicroelectronics
Teilenummer: STM32F410C8U6 ✗ AbgekündigtSTM32F410C8U6 Übersicht
A microcontroller is a programmable system-on-chip that combines a processor core, embedded memory, analog and digital peripherals, and communication interfaces on one integrated circuit. The STM32F410 belongs to the STM32F4 product family and uses the Arm Cortex-M4 processor architecture. Its combination of 100 MHz processing performance, integrated 64 KB flash, and a compact 7 x 7 mm package makes it suitable for cost-sensitive embedded systems that require more capability than a basic 8-bit controller but do not need a high-pin-count microcontroller.
Key device characteristics include 32-bit processing at up to 100 MHz, 64 KB of embedded flash, 32 KB SRAM, a 12-bit ADC, and operation from a 1.7 V to 3.6 V supply. The verified product listings also identify the STM32F410 series as an entry-level member of the STM32F4 family for medical, industrial, and consumer applications. The UFQFPN-48 package provides 48 contacts on a compact surface-mount footprint.
The Cortex-M4 core supports efficient control-oriented software, while the integrated flash and SRAM reduce the need for external memory in moderate-complexity designs. The STM32F410 family balances processing performance, power efficiency, and integration. Because this specific verified data does not enumerate the complete peripheral set, exact timer, communication-channel, GPIO, and debug configurations must be confirmed in the manufacturer datasheet before final firmware and board qualification.
Typical uses include industrial sensing and control equipment, medical monitoring instruments, consumer accessories, compact motor controllers, and connected embedded products. For analog measurement, the device's 12-bit ADC supports sensor acquisition, while its 100 MHz core provides headroom for digital filtering, communication protocol handling, and supervisory control tasks. Final ADC accuracy and peripheral timing must be assessed under the intended operating conditions.
A critical design consideration is PCB land-pattern and thermal-pad implementation. The 48-pin UFQFPN package has a 7 x 7 mm body and an exposed pad, so the footprint, solder mask, paste pattern, and stencil design should be taken directly from the manufacturer package drawing rather than approximated. Supply voltage must remain within 1.7 V to 3.6 V, and unused pins should follow the datasheet recommendations.
This page combines the verified manufacturer and distributor specifications, package information, purchasing data, and practical qualification guidance. It also distinguishes a genuine drop-in alternative from related STM32F410 ordering codes, avoiding unsupported claims about cross-manufacturer pin compatibility, lifecycle status, or unverified electrical details.
Drop-in-Alternativen für STM32F410C8U6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
STM32F410C8U7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
STM32F410C8U6 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 100 MHz |
| Word Size | 32 bit |
| Embedded Flash Memory | 64 KB |
| Flash Organization | 64K x 8 |
| SRAM | 32 KB |
| ADC Resolution | 12 bit |
| Operating Voltage Range | 1.7 V to 3.6 V |
| Betriebstemperaturbereich | -40°C to +85°C |
| Gehäuse | UFQFPN-48, 7 x 7 mm |
| Pin-Anzahl | 48 pins |
| Montageart | Surface mount |
| Exposed Pad | Yes |
| Series | STM32F4 |
| Product Positioning | Entry level to the STM32F4 series |
| RoHS-Status | RoHS3 compliant |
STM32F410C8U6 ufqfpn-48, 7 x 7 mm Pinbelegungsleitfaden
Pinbelegung für STM32F410C8U6 (ufqfpn-48, 7 x 7 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für STM32F410C8U6.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
STM32F410C8U6 ist geeignet für 6 Anwendungs: Industrial Sensor and Control Node, Medical Monitoring Instrument, Consumer Connected Accessory, Compact Motor Controller, Data Acquisition and Test Module, IoT Sensor Gateway.
Industrial Sensor and Control Node
The STM32F410C8U6 fits compact industrial sensing and supervisory-control products because its Arm Cortex-M4 core operates at up to 100 MHz while retaining 64 KB flash and 32 KB SRAM on one device. The 12-bit ADC can acquire analog sensor signals, and the 1.7 V to 3.6 V operating range supports embedded systems with a regulated low-voltage supply. Its 48-pin UFQFPN package reduces board area compared with many leaded or higher-pin-count alternatives. Engineers should reserve pins for the external sensing chain, communications, programming access, and production test, then confirm the complete peripheral and pin assignment in the manufacturer datasheet.
Empfohlen
Medical Monitoring Instrument
The STM32F410C8U6 can serve as the control processor in a compact medical monitoring instrument when its verified 100 MHz performance, 64 KB flash, 32 KB SRAM, and 12-bit ADC meet the measurement requirements. The Cortex-M4 architecture provides enough computational capacity for sensor conditioning, digital filtering, state management, and user-interface control in a space-constrained enclosure. The -40°C to +85°C device rating supports industrial environments, although it does not by itself establish medical-system compliance. A medical design must separately validate signal accuracy, electrical safety, risk controls, and applicable sector requirements.
Empfohlen
Consumer Connected Accessory
The STM32F410C8U6 is appropriate for compact consumer accessories that combine sensor handling, local control, and serial communications. Its 100 MHz Cortex-M4 core can execute protocol stacks and control logic, while 64 KB flash stores firmware and 32 KB SRAM supports active data handling. The small 7 x 7 mm UFQFPN-48 package helps reduce product volume, and operation down to 1.7 V supports compact power architectures. Product developers should verify exposed-pad soldering and acoustic or environmental requirements, and should use the manufacturer pin definitions before assigning USB, UART, I2C, or wireless-module interfaces.
Empfohlen
Compact Motor Controller
The STM32F410C8U6 is suitable for compact motor-control subsystems where fast deterministic control, embedded memory, and analog measurement must coexist in a small package. Its 100 MHz Arm Cortex-M4 core can execute control algorithms and supervisory logic, while the 12-bit ADC can sample position or current feedback under suitable conditioning. The 48-pin package provides a practical balance between board area and available connections, although the complete timer-channel assignment must be checked in the datasheet. Power-stage isolation, current-sense range, protection behavior, and thermal validation remain critical design tasks.
Empfohlen
Data Acquisition and Test Module
The STM32F410C8U6 can form the core of a compact data-acquisition or test module when the required signal bandwidth falls within the device's verified 12-bit ADC and 100 MHz processing capabilities. The embedded 64 KB flash supports local firmware, configuration, and calibration data, while 32 KB SRAM allows temporary sample buffering and control processing. Its 1.7 V to 3.6 V supply range and 7 x 7 mm package suit instrumented modules with constrained space. Designers must confirm ADC bandwidth, acquisition timing, accuracy, reference stability, and peripheral mapping from the manufacturer documentation rather than extrapolating from the summary specifications.
Empfohlen
IoT Sensor Gateway
The STM32F410C8U6 is a practical base for an IoT sensor gateway that must aggregate readings, run local filtering, and manage a communications link in a compact enclosure. The 100 MHz Cortex-M4 core supplies useful headroom for protocol processing, while 64 KB flash and 32 KB SRAM accommodate moderate firmware and data-buffer requirements. The 48-pin UFQFPN package allows a space-efficient layout for powered sensor nodes. A production gateway still needs verified pin mapping for its chosen radio or network interface, secure boot and update provisions if required, and careful partitioning of analog sensing and digital communication circuitry.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32F410C8U6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32F410C8U7 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | UFQFPN-48 (7 x 7 mm) | UFQFPN-48 (7 x 7 mm) |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 100 MHz | 100 MHz |
| Embedded Flash Memory | 64 KB | 64 KB |
| SRAM | 32 KB | 32 KB |
| ADC Resolution | 12 bit | 12 bit |
| Operating Voltage Range | 1.7 V to 3.6 V | 1.7 V to 3.6 V |
Wichtigste Unterscheidungsmerkmale
- Balanced embedded resources in a compact footprint (vs. STM32F410C8U7)
- Compact 48-pin package (vs. STM32F410C8U7)
- Low-voltage operation with integrated conversion capability (vs. STM32F410C8U7)
Designhinweise
Use the manufacturer package drawing to create the 48-pin UFQFPN land pattern and exposed-pad geometry. The verified data confirms a 7 x 7 mm body but does not provide pad dimensions or paste recommendations, so these must not be inferred from a generic QFN footprint. Place input and output decoupling close to the corresponding supply pins, preserve the exposed pad's solderability, and inspect the first articles with a suitable X-ray process when solder voids are a concern.
Design the supply for the verified 1.7 V to 3.6 V operating range and check every external power-domain limit against the current manufacturer datasheet. If the board also contains sensors, radio modules, or actuators, separate their supply requirements from the MCU rail and prevent transient events from exceeding the device limits. Add local bulk and high-frequency decoupling close to the package, then verify startup, brownout behavior, and current consumption on prototype hardware.
Do not treat an STM32F410 family member as interchangeable without checking the exact suffix, temperature grade, pinout, flash size, SRAM size, and errata status. STM32F410C8U7 is the only same-family drop-in candidate supported by the supplied cross-reference data. Tape-and-reel ordering codes such as STM32F410C8U6TR are packing variants rather than distinct functional designs, and no cross-manufacturer replacement should be approved solely from its processor-core label.
Compliance-Informationen
The verified JLCPCB listing identifies STM32F410C8U6 as RoHS3 compliant. No verified REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were supplied.
