STM32F411CCU7TR - 100MHz Cortex-M4 256KB MCU | STMicroelectronics
Teilenummer: STM32F411CCU7TR ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.2034 | $2,20 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
STM32F411CCU7TR Übersicht
An ARM Cortex-M4 microcontroller is a 32-bit RISC processor designed for embedded control and digital signal processing. The STM32F411 family combines the Cortex-M4 core with Flash memory, RAM, GPIO, communication peripherals, and power-management features in one integrated device. Its DSP and floating-point unit make it suitable for control loops, digital filtering, sensor processing, audio, and communications-oriented products.
Verified distributor information identifies the STM32F411CCU7TR as a 100 MHz STM32F411xC/xE device with 256 Kbytes of Flash memory and an ART Accelerator. The suffix TR denotes the tape-and-reel ordering form, while the package is identified as 48-UFQFPN, also described by distributors as 48-pin UFQFPN. The listed package drawing uses an exposed-pad-compatible land pattern that requires careful PCB layout and thermal management.
Typical applications include industrial automation modules, motor and motion-control boards, connected sensors, wearable or portable equipment, audio signal-chain products, and compact IoT gateways. The Cortex-M4 DSP capability can accelerate suitable filtering and transform operations, while the FPU improves floating-point workloads compared with an integer-only core. The exact peripheral mix, RAM size, voltage limits, package dimensions, and electrical limits should be confirmed in the STMicroelectronics datasheet for production design.
A critical design step is preserving the correct pin assignment, power rails, decoupling network, clock configuration, boot interface, and exposed-pad layout. Because the available verified data does not provide complete pin names, electrical limits, RAM capacity, or detailed peripheral parameters, this page avoids inventing those values. Engineers should use the manufacturer datasheet and reference manual for the final firmware, PCB, and production qualification decisions.
Drop-in-Alternativen für STM32F411CCU7TR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit STM32F411CCU7TR (gleiche Bauform und Footprint) – abweichend in Package, Communication Interfaces, Core, Flash Memory, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
STM32F411CCU6TR
✅ Drop-In✓ Auf Lager
$2.96 / Stück
Datenblatt ansehen →STM32F411CCU7
✅ Drop-In✓ Auf Lager
$2.2034 / Stück
Datenblatt ansehen →STM32F405VGT6TR
✅ Drop-In✓ Auf Lager
$8.1 / Stück
Datenblatt ansehen →STM32F407VGT6TR
✅ Drop-In✓ Auf Lager
$7.55 / Stück
Datenblatt ansehen →STM32F407VET6TR
✅ Drop-In✓ Auf Lager
$3.4498 / Stück
Datenblatt ansehen →STM32F411CCU7TR Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| CPU Core | Arm Cortex-M4 with DSP and FPU |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 256 Kbytes |
| Architecture | 32-bit RISC |
| Instruction Set | ARM Thumb-2; DSP and floating-point instructions identified in distributor data |
| Product Line | STM32F411 high-performance access line |
| Gehäuse | 48-UFQFPN, 7 x 7 mm |
| Ordering Suffix | TR tape-and-reel ordering form |
| Montageart | Surface mount |
STM32F411CCU7TR 48-ufqfpn, 7 x 7 mm Pinbelegungsleitfaden
Pinbelegung für STM32F411CCU7TR (48-ufqfpn, 7 x 7 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für STM32F411CCU7TR.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
STM32F411CCU7TR ist geeignet für 6 Anwendungs: Industrial Automation Controller, Connected Sensor Module, Motion and Motor Control, Audio Signal Processing, Portable and Wearable Device, IoT Gateway and Communication Hub.
Industrial Automation Controller
The STM32F411CCU7TR fits compact industrial automation controllers because its 100 MHz Arm Cortex-M4 core provides real-time processing headroom while DSP and FPU support benefits control algorithms, filtering, and signal conditioning. With 256 Kbytes of Flash, it can store application firmware, boot code, configuration data, and protocol handlers in one device. The MCU can supervise sensors, drive actuators, manage digital I/O, and support communication modules in a compact control platform. Before production use, verify the exact GPIO map, ADC resources, timers, communication peripherals, voltage range, and industrial temperature requirements from the STMicroelectronics documentation.
Empfohlen
Connected Sensor Module
The STM32F411CCU7TR is suitable for connected sensor modules that combine measurement, filtering, local control, and a network interface. Its Cortex-M4 DSP and FPU capability can support digital signal processing, while the 100 MHz operating frequency supports responsive control and protocol handling. The 256 Kbytes of Flash provides room for application logic without immediately requiring external memory. Use the MCU for sensor conditioning, threshold decisions, calibration storage, diagnostics, and communication management. The exact peripheral and pin assignments must be checked because the supplied verified data does not enumerate the complete ADC, timer, GPIO, or interface set.
Empfohlen
Motion and Motor Control
The STM32F411CCU7TR can serve as the control processor in compact motion and motor-control subsystems where deterministic control-loop execution and compactness are important. The 100 MHz Cortex-M4 core provides computational headroom, and the DSP/FPU features can accelerate suitable control and filtering operations. The MCU can coordinate timing, read feedback signals, calculate control outputs, and supervise actuators through external drivers. The supplied data does not confirm the target device’s timer count, PWM channels, encoder interfaces, or analog limits, so those functions must be verified in the STMicroelectronics datasheet before selecting a motor-control architecture.
Empfohlen
Audio Signal Processing
The STM32F411CCU7TR is appropriate for compact audio-oriented signal-processing products because the Cortex-M4 core includes DSP and FPU capability. These features can support digital filtering, gain control, mixing, or other fixed-point and floating-point operations when the product’s algorithm fits the available Flash and memory resources. The 100 MHz clock provides a practical processing foundation for low-bandwidth audio control and monitoring. The verified data does not identify audio interfaces, sample-rate limits, DAC or ADC resources, or audio-specific timing guarantees, so the complete signal chain and pin mapping require confirmation from the manufacturer datasheet.
Empfohlen
Portable and Wearable Device
The STM32F411CCU7TR can support portable embedded products where compact processing, efficient firmware storage, and real-time control are valuable. Its 48-UFQFPN package supports compact board construction, while the 100 MHz Cortex-M4 core and DSP/FPU features can handle sensor fusion, gesture logic, control loops, or local signal processing. The 256 Kbytes of Flash allows integrated application firmware, although final suitability depends on RAM, power consumption, sleep behavior, and analog resources that are not supplied in the verified snippets. Battery-powered designs should confirm low-power modes, operating voltage, and current consumption from the official datasheet.
Empfohlen
IoT Gateway and Communication Hub
The STM32F411CCU7TR is usable in a small IoT gateway or communication hub when the design needs a capable embedded processor without a higher-memory MCU. The Cortex-M4 core can handle protocol state machines, local data formatting, control logic, and DSP-assisted filtering at up to 100 MHz. With 256 Kbytes of Flash, the device is suited to applications that keep networking logic, diagnostics, and configuration code on the same MCU. The verified data does not identify the complete Ethernet, USB, UART, SPI, or I2C peripheral set, so the selected communication interfaces must be checked against the exact STM32F411CCU7TR datasheet and pin assignment.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32F411CCU7TR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32F411CCU6TR | STM32F411CCU7 | STM32F405VGT6TR | STM32F407VGT6TR |
|---|---|---|---|---|---|
| Package | 48-UFQFPN, 7 x 7 mm | 48-UFQFPN family; exact package drawing requires confirmation | 48-UFQFPN family; exact package drawing requires confirmation | 48-pin package family entry; exact package requires confirmation | 48-pin package family entry; exact package requires confirmation |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Product Line | STM32F411 high-performance access line | STM32F411 family | STM32F411 family | STM32F4 family | STM32F4 family |
| Ordering Suffix | TR | TR | Non-TR orderable form | TR | TR |
Wichtigste Unterscheidungsmerkmale
- Direct 100 MHz Cortex-M4 positioning (vs. STM32F411CCU6TR)
- DSP and FPU capability (vs. STM32F405VGT6TR)
- Compact 48-UFQFPN integration (vs. STM32F407VGT6TR)
- Commercial sourcing visibility (vs. STM32F411CCU7)
Designhinweise
Use the official STMicroelectronics 48-UFQFPN land pattern rather than inferring a footprint from the distributor shorthand. Keep the exposed-pad thermal and electrical requirements compatible with the manufacturer layout guidance, and place input and bulk-decoupling connections close to the appropriate power pins. Validate the final board with assembly rules for the manufacturer’s recommended via and solder-mask pattern.
Preserve the STM32F411CCU7TR clock, boot, reset, debug, and programming nets exactly as defined in the datasheet. Route high-speed clock and debug-sensitive signals away from switching nodes and noisy power-regulator outputs. Because the complete pinout is not present in the supplied verified data, the package drawing and pin table must be checked before schematic capture or PCB release.
The 100 MHz Cortex-M4 core can increase dynamic power as operating frequency rises, so power delivery must be evaluated at the actual clock, voltage, temperature, and peripheral load. Use the manufacturer’s recommended supply and decoupling network, and confirm the device’s exact voltage limits before selecting regulators or designing power sequencing. Do not calculate thermal performance from unverified package or current data.
Do not treat a related STM32F4 MPN as a drop-in replacement merely because it is also an ARM Cortex-M4 device. Confirm package pinout, voltage thresholds, Flash and RAM requirements, peripheral assignments, clock tree, bootloader behavior, and software support. The alternatives listed here are candidate same-package parts requiring official datasheet verification before substitution.
The verified distributor snippets provide core, frequency, Flash, and package information but not the complete electrical or pin-level specification set. Before production, retrieve the current manufacturer datasheet, reference manual, errata, package drawing, and programming documentation. This prevents design decisions based on incomplete distributor metadata.
Compliance-Informationen
The supplied verified data does not provide product-specific compliance declarations. Check the current STMicroelectronics product documentation and material compliance records before release.
