STM32H723VGT6 - 550MHz ARM Cortex-M7 MCU | STMicroelectronics
Teilenummer: STM32H723VGT6 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.25 | $112,50 |
| 100 | $10 | $1.000,00 |
| 500 | $9 | $4.500,00 |
| 1.000 | $8.1 | $8.100,00 |
STM32H723VGT6 Übersicht
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to industrial robots and consumer electronics. The STM32H723VGT6 belongs to the high-performance segment of the microcontroller family, positioned above mid-range MCUs like the STM32F4 series, and is optimized for applications that require intensive computation, such as digital signal processing, motor control, and artificial intelligence at the edge.
Key features of the STM32H723VGT6 include a 550 MHz Cortex-M7 core with double-precision floating-point unit (FPU), a Chrom-ART Accelerator for 2D graphics, and a comprehensive set of communication interfaces including Ethernet, USB OTG HS, CAN FD, and multiple UARTs/SPIs/I2Cs. The device also integrates a 16-bit ADC with up to 5 MSPS, a 12-bit DAC, and advanced timers for precise PWM generation. With its high clock speed and rich peripheral set, the STM32H723VGT6 delivers exceptional performance for real-time applications.
From a technical architecture perspective, the STM32H723VGT6 features a Harvard architecture with separate instruction and data buses, enabling simultaneous fetch and data access. The Cortex-M7 core includes a 6-stage pipeline, branch prediction, and a memory protection unit (MPU) for enhanced reliability. The device supports external memory interfaces (FMC) for SDRAM, NOR, and NAND Flash, and includes a hardware cryptographic accelerator for AES, DES, and RSA, ensuring secure data communication. The integrated power management allows operation from 1.62V to 3.6V, with multiple low-power modes to optimize energy consumption.
Typical applications for the STM32H723VGT6 include industrial automation, motor control, power conversion, medical devices, and high-end consumer electronics. Its high-speed ADC and timers make it ideal for digital power supplies and motor drives, while the Ethernet and USB interfaces enable connectivity in IoT gateways and industrial networking. The device's graphics acceleration supports human-machine interfaces (HMI) with smooth rendering.
When designing with the STM32H723VGT6, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin requires a dedicated analog supply with a ferrite bead to reduce noise. For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the datasheet to maintain signal integrity. The device supports in-circuit programming via SWD or JTAG, and the STM32CubeIDE toolchain simplifies development.
Drop-in-Alternativen für STM32H723VGT6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit STM32H723VGT6 (gleiche Bauform und Footprint) – abweichend in Communication Interfaces, Package, Flash Memory, SRAM, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
STM32H723VGH6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →STM32H743VIT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$7.98 / Stück
Datenblatt ansehen →STM32H753VIT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32H750VBT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$5.25 / Stück
Datenblatt ansehen →STM32H745VIT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32H747VIT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM32H733VGT6
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$8.1 / Stück
Datenblatt ansehen →STM32H723VGT6 Grenzwerte & elektrische Eigenschaften
| Core | ARM Cortex-M7 |
| Maximale Taktfrequenz | 550 MHz |
| Flash Memory | 1 Mbyte |
| SRAM | 564 Kbytes |
| Gehäuse | LQFP100 (14x14 mm) |
| Versorgungsspannung | 1.62 V to 3.6 V |
| Betriebstemperatur | -40C to +85C |
| ADC Resolution | 16-bit |
| ADC Sampling Rate | 5 MSPS |
| DAC Resolution | 12-bit |
| Number of GPIOs | 80 |
| Communication Interfaces | Ethernet, USB OTG HS, CAN FD, UART, SPI, I2C |
| Timers | Advanced 16-bit and 32-bit timers |
| DMA Channels | 16 |
| RoHS-Status | Compliant |
STM32H723VGT6 Pin-Konfiguration
| Pin 1 | VBAT — Backup battery supply |
| Pin 2 | PC13 — GPIO / RTC output |
| Pin 3 | PC14 — GPIO / OSC32_IN |
| Pin 4 | PC15 — GPIO / OSC32_OUT |
| Pin 5 | PF0 — GPIO |
| Pin 6 | PF1 — GPIO |
| Pin 7 | NRST — Reset (active low) |
| Pin 8 | PC0 — GPIO / ADC input |
| Pin 9 | PC1 — GPIO / ADC input |
| Pin 10 | PC2 — GPIO / ADC input |
| Pin 11 | PC3 — GPIO / ADC input |
| Pin 12 | VDD — Digital power supply |
| Pin 13 | VSS — Ground |
| Pin 14 | PC4 — GPIO / ADC input |
| Pin 15 | PC5 — GPIO / ADC input |
| Pin 16 | PB0 — GPIO / ADC input |
| Pin 17 | PB1 — GPIO / ADC input |
| Pin 18 | PB2 — GPIO |
| Pin 19 | PF2 — GPIO |
| Pin 20 | PF3 — GPIO |
Typische Anwendungen
STM32H723VGT6 ist geeignet für 6 Anwendungs: Industrial Automation, Motor Control, Power Conversion, Medical Devices, IoT Gateways, Consumer Electronics.
Industrial Automation
The STM32H723VGT6 is ideal for industrial automation due to its high-speed processing, advanced timers, and multiple communication interfaces. It can handle complex control algorithms for PLCs, robotics, and motion control. The 550 MHz Cortex-M7 core ensures fast response times, while the Ethernet and CAN FD interfaces enable seamless integration into industrial networks. The device's 16-bit ADC with 5 MSPS sampling rate allows precise analog signal acquisition for sensors and feedback loops. Its robust operating temperature range (-40C to +85C) and wide supply voltage (1.62V to 3.6V) make it suitable for harsh industrial environments. The Chrom-ART Accelerator supports graphical HMIs for operator interfaces, enhancing user interaction. With its rich peripheral set, the STM32H723VGT6 can replace multiple discrete components, reducing system cost and complexity.
Empfohlen
Motor Control
The STM32H723VGT6 excels in motor control applications, such as field-oriented control (FOC) of brushless DC motors and permanent magnet synchronous motors. Its high clock speed enables fast execution of complex control algorithms, while the advanced timers generate high-resolution PWM signals for precise motor drive. The 16-bit ADC with 5 MSPS sampling rate captures current and voltage feedback with high accuracy, essential for closed-loop control. The device supports multiple motor control topologies, including sensorless and encoder-based control. Its rich peripheral set includes dedicated motor control timers and comparators, simplifying hardware design. The STM32H723VGT6's low-latency interrupt handling ensures real-time response to fault conditions, enhancing system safety. With its high performance and reliability, it is a preferred choice for industrial motor drives, robotics, and automotive applications.
Empfohlen
Power Conversion
The STM32H723VGT6 is well-suited for power conversion applications, including digital power supplies, inverters, and battery chargers. Its high-speed ADC and timers enable precise control of switching converters, such as buck, boost, and flyback topologies. The 550 MHz Cortex-M7 core can execute complex control algorithms, such as PID and predictive control, with minimal latency. The device's advanced PWM timers support dead-time insertion and complementary outputs, essential for half-bridge and full-bridge converters. The integrated analog comparators and DAC allow for fast overcurrent and overvoltage protection. The STM32H723VGT6's communication interfaces, including CAN FD and Ethernet, enable remote monitoring and control in smart grid and industrial power systems. Its wide operating temperature range and robust design make it suitable for demanding power electronics environments.
Empfohlen
Medical Devices
The STM32H723VGT6 is used in medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high processing power enables real-time signal processing for ECG, EEG, and other biosignals. The 16-bit ADC with high sampling rate ensures accurate data acquisition from sensors. The device's low-power modes help extend battery life in portable medical devices. The STM32H723VGT6's security features, including hardware cryptographic acceleration, protect patient data and ensure secure communication. Its rich peripheral set supports various interfaces, such as USB and UART, for connectivity with external devices. The device's reliability and long-term availability make it suitable for medical applications requiring high standards of quality and safety. The Chrom-ART Accelerator can render graphical user interfaces for medical displays, enhancing usability.
Empfohlen
IoT Gateways
The STM32H723VGT6 is an excellent choice for IoT gateways that aggregate data from multiple sensors and devices. Its Ethernet and USB interfaces enable high-speed connectivity to the cloud or local networks. The 550 MHz Cortex-M7 core can handle protocol stacks, such as MQTT and HTTP, with ease. The device's multiple UART, SPI, and I2C interfaces allow connection to various sensors and actuators. The STM32H723VGT6's security features, including hardware encryption, ensure secure data transmission. Its low-power modes help reduce energy consumption in always-on gateway applications. The device's rich peripheral set and high performance make it suitable for edge computing, where data processing occurs locally before transmission. The Chrom-ART Accelerator can support graphical dashboards for local monitoring.
Empfohlen
Consumer Electronics
The STM32H723VGT6 is used in high-end consumer electronics, such as smart home devices, audio systems, and wearable devices. Its high processing power enables advanced features like voice recognition, image processing, and real-time audio effects. The device's Chrom-ART Accelerator supports smooth graphics for user interfaces. The STM32H723VGT6's low-power modes are crucial for battery-powered devices, extending operational life. Its rich peripheral set includes USB, I2S, and SAI interfaces for audio and connectivity. The device's security features protect user data and enable secure firmware updates. The STM32H723VGT6's compact LQFP100 package allows for space-constrained designs. With its high performance and versatility, it is a popular choice for premium consumer products.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM32H723VGT6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM32H723VGH6 | STM32H743VIT6 | STM32H753VIT6 |
|---|---|---|---|---|
| Package | LQFP100 | LQFP100 - same | LQFP100 - same | LQFP100 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core Clock | 550 MHz | 550 MHz | 480 MHz | 480 MHz |
| Flash Memory | 1 MB | 1 MB | 2 MB | 2 MB |
| SRAM | 564 KB | 564 KB | 1 MB | 1 MB |
| ADC Resolution | 16-bit | 16-bit | 16-bit | 16-bit |
| Ethernet | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Highest clock speed in the STM32H7 series at 550 MHz (vs. STM32H743VIT6)
- Integrated Chrom-ART Accelerator for 2D graphics (vs. STM32H743VIT6)
- 16-bit ADC with 5 MSPS sampling rate (vs. STM32H743VIT6)
Designhinweise
The STM32H723VGT6 requires a stable power supply. Decouple each VDD pin with a 100nF ceramic capacitor placed as close as possible to the pin, and add a 4.7uF bulk capacitor per power domain. The VDDA pin must be connected to a clean analog supply, typically through a ferrite bead and a 1uF capacitor to ground. Ensure the supply voltage is within 1.62V to 3.6V, and consider using a dedicated LDO for analog circuits to minimize noise.
For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the STM32H723VGT6 datasheet. Use controlled impedance traces (e.g., 90 ohms differential for USB) and keep trace lengths short. Place the external PHY close to the MCU to minimize signal degradation. For the crystal oscillator, place it near the OSC_IN/OSC_OUT pins and keep the load capacitors close to the crystal. Avoid routing high-speed signals near the crystal to prevent interference.
The STM32H723VGT6 can dissipate significant power when running at 550 MHz with all peripherals active. Ensure adequate thermal management by providing a copper pour on the PCB under the LQFP100 package, and consider adding vias to a ground plane for heat spreading. The maximum junction temperature is 125C, so calculate the power dissipation and ensure the thermal resistance of the package (theta_JA) is sufficient for your ambient temperature. For high-power applications, a heatsink or forced airflow may be required.
Compliance-Informationen
RoHS compliant per STMicroelectronics. Not AEC-Q100 qualified; for automotive, consider STM32H7A3 or dedicated automotive MCUs.
