STMicroelectronics

STM32L151VBH6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics

Teilenummer: STM32L151VBH6 ✓ Aktiv
2.5 V or 3.3 V Vdss 100-UFBGA Package 32 MHz Speed 128 KB (128K x 8) Memory
MOQ: 1 |

STM32L151VBH6 Übersicht

The STMicroelectronics STM32L151VBH6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with a 32 MHz clock, 128 KB of flash memory, and a 100-pin UFBGA package measuring 7 x 7 mm. It is designed for compact embedded systems that require efficient processing, low-power operation, and broad peripheral integration.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one die. Within the product hierarchy, the STM32L151 belongs to the STM32L1 family of 32-bit microcontrollers and combines an ARM Cortex-M3 core with ultra-low-power design techniques. This makes it suitable for battery-powered instruments, industrial sensors, connected equipment, and low-power control modules that must balance processing capability with energy efficiency.

The STM32L151VBH6 provides 128 KB of flash, operates at up to 32 MHz, and supports operation from 2.5 V and 3.3 V supply levels. Its 100-UFBGA package offers 100 electrical contacts in a compact 7 x 7 mm footprint. The 128 KB code-storage capacity provides room for embedded control routines, communication protocols, configuration data, and firmware updates, while the 32 MHz Cortex-M3 core supports responsive real-time control.

The STM32L151 device family combines an ultra-low-power architecture with extensive peripheral integration. Its 32-bit processing core supports efficient execution of control algorithms and communication tasks. The low-power operating modes are particularly valuable in applications that spend most of their time in sleep or standby conditions, where reducing active energy use extends operating time between battery replacements or service visits.

Typical uses include industrial sensor nodes, low-power wireless gateways, building-control terminals, portable measurement equipment, security and access modules, and compact motor-control or condition-monitoring systems. The 100-pin package provides a high pin count for systems requiring several communication interfaces, analog inputs, timers, and general-purpose I/O within a small board area.

PCB design should prioritize short return paths for supply and ground, clean routing around sensitive analog inputs, and placement of decoupling capacitors close to the device pins. Because the BGA footprint has a 0.5 mm pitch, assembly capability, solder-paste volume, thermal management, and inspection access should be confirmed before releasing the PCB layout. Firmware configuration and peripheral assignments should also be checked against the exact 100-pin package documentation.

This page combines the exact STM32L151VBH6 identification, practical application guidance, package considerations, comparison criteria, and drop-in replacement guidance for engineers evaluating the STM32L1 family in compact low-power designs.

Drop-in-Alternativen für STM32L151VBH6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

STM32L152VBH6

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-UFBGA (7x7)
Adds hardware cryptographic capability while retaining the 32 MHz Cortex-M3 core and 128 KB flash configuration; 0 MHz and 0 KB differences in those identified parameters

📋 Referenzalternative (nicht im Katalog)

STM32L162VBH6

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-UFBGA (7x7)
Adds USB capability while retaining the 32 MHz Cortex-M3 core and 128 KB flash configuration; 0 MHz and 0 KB differences in those identified parameters

📋 Referenzalternative (nicht im Katalog)

STM32L151VBU6

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-UFBGA (7x7)
Lower temperature grade than STM32L151VBH6 while retaining the 32 MHz Cortex-M3 core, 128 KB flash, and 100-UFBGA footprint; 0 MHz and 0 KB differences in core and memory

📋 Referenzalternative (nicht im Katalog)

STM32L152VBU6

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-UFBGA (7x7)
Lower temperature grade and added hardware cryptographic capability versus STM32L151VBH6; core remains 32 MHz and flash remains 128 KB

📋 Referenzalternative (nicht im Katalog)

STM32L162VBU6

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 100-UFBGA (7x7)
Lower temperature grade and added USB capability versus STM32L151VBH6; core remains 32 MHz and flash remains 128 KB

📋 Referenzalternative (nicht im Katalog)

STM32L151VBH6 Grenzwerte & elektrische Eigenschaften

Product Type 32-bit ultra-low-power microcontroller
Processor Core ARM Cortex-M3
Architecture ARM 32-bit
Maximale Taktfrequenz 32 MHz
Flash Memory 128 KB (128K x 8)
Program Memory Type Flash
Versorgungsspannung 2.5 V or 3.3 V
Device Family STM32L1
Package Type 100-UFBGA
Package Dimensions 7 x 7 mm
Pin-Anzahl 100 pins
Montageart Surface mount
Packaging Form Tray
Core Count 1 core
Datenbusbreite 32-bit

STM32L151VBH6 7 x 7 mm Pinbelegungsleitfaden

Pinbelegung für STM32L151VBH6 (7 x 7 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für STM32L151VBH6 im 7 x 7 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für STM32L151VBH6.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

STM32L151VBH6 ist geeignet für 6 Anwendungs: Industrial Sensor Nodes, Battery-Powered Measurement Instruments, Building Control and HVAC Modules, Low-Power Wireless Gateways, Portable Security and Access Modules, Compact Condition-Monitoring Systems.

🏭

Industrial Sensor Nodes

The STM32L151VBH6 fits industrial sensor nodes that must acquire measurements, apply local filtering, and communicate through a compact controller. Its ARM Cortex-M3 core runs at up to 32 MHz, providing sufficient throughput for sensor conditioning and protocol handling, while 128 KB of flash supports firmware, calibration tables, and configuration data. The ultra-low-power STM32L1 architecture is valuable when the node spends substantial time between readings. A practical design can use the MCU to control the sensor, timestamp samples, manage a duty cycle, and supervise a low-power communications link. The 100-UFBGA footprint measures 7 x 7 mm, but fine-pitch assembly and thermal verification must be included in the manufacturing plan.

🔧

Battery-Powered Measurement Instruments

The STM32L151VBH6 is appropriate for portable measurement instruments where each milliamp-hour affects operating time. Its 32-bit Cortex-M3 processor can perform calibration, filtering, data conversion, and user-interface logic, while 128 KB of flash accommodates embedded application code and local records. The STM32L1 low-power modes allow the controller to remain responsive while reducing consumption between measurements. A practical implementation can place the MCU in a low-power state during idle intervals, wake it for a timed acquisition, and transmit results over a serial interface. Operation from 2.5 V or 3.3 V supports compatibility with common portable power systems, although the complete sensor, display, and radio loads must be included in the energy budget.

🏭

Building Control and HVAC Modules

The STM32L151VBH6 can serve as the central controller in a building-control or HVAC module that coordinates sensors, actuators, and a wired communication interface. The 32 MHz Cortex-M3 core supports deterministic control tasks, while 128 KB of flash provides sufficient room for protocol stacks and configuration logic. Its low-power design is helpful in distributed building systems where many modules operate from local power and spend significant time idle. In a typical circuit, the MCU reads temperature or occupancy inputs, evaluates control rules, drives a relay or valve through suitable interface circuitry, and reports status over RS-485. The 100-pin UFBGA package keeps the controller compact, but the board should provide robust decoupling, protection, and thermal margin for switching and relay circuitry.

🌐

Low-Power Wireless Gateways

The STM32L151VBH6 is suitable as the supervisory controller in a low-power wireless gateway that aggregates sensor data and manages local communications. Its 32-bit Cortex-M3 processing capability handles protocol framing, routing tables, configuration, and health monitoring, while 128 KB of flash stores application firmware and radio-control code. The low-power STM32L1 feature set can reduce energy use when traffic is intermittent, although the wireless radio should be powered down or placed in its own sleep state when possible. A practical gateway implementation can receive packets over SPI or UART, validate and buffer data, update local state, and forward results through another interface. The 7 x 7 mm 100-UFBGA package supports compact boards, subject to the manufacturer’s land-pattern and assembly requirements.

📱

Portable Security and Access Modules

The STM32L151VBH6 can support portable access-control, credential-reading, or compact security modules that require local processing without continuous high-power operation. The 32 MHz Cortex-M3 core can perform device management, event logging, peripheral arbitration, and protocol handling, and 128 KB of flash provides space for firmware and configuration. Low-power modes are particularly useful for handheld or remotely powered installations where the module must conserve energy between user interactions. In a practical design, the MCU initializes a reader or keypad, validates an input, updates a local event record, and communicates a decision through a secure serial or network interface. Security-critical functions should use the appropriate STM32L1 family member with certified cryptographic hardware rather than relying on this baseline variant alone.

🖥️

Compact Condition-Monitoring Systems

The STM32L151VBH6 fits compact condition-monitoring systems that sample vibration, temperature, pressure, or electrical health and retain locally processed results. The 32-bit Cortex-M3 core provides enough arithmetic capability for filtering and condition algorithms, and the 128 KB flash capacity supports operating firmware, thresholds, and diagnostic tables. Ultra-low-power operation helps when monitoring equipment runs on batteries or harvests energy intermittently. A typical implementation schedules sensor sampling, converts and filters measurements, evaluates alarm thresholds, and records significant events before communicating through a serial interface. The 100-UFBGA package enables a small controller assembly, but the analog front end, sensor supply, and vibration environment may require separate layout partitioning to prevent noise or mechanical stress from degrading measurements.

What is the STM32L151VBH6?
The STM32L151VBH6 is an ultra-low-power, 32-bit STMicroelectronics microcontroller built around an ARM Cortex-M3 core. It operates at up to 32 MHz, contains 128 KB of flash memory, and uses a compact 100-pin UFBGA package measuring 7 x 7 mm. According to the manufacturer product listing, the device is positioned for low-power embedded-control applications where processing performance, flash capacity, and a small board footprint are important.
What are the key specifications of STM32L151VBH6 that engineers should know?
The STM32L151VBH6 combines an ARM Cortex-M3 core, a 32 MHz maximum clock, 128 KB of flash, and a 100-UFBGA package in a 7 x 7 mm footprint. According to the manufacturer listing, it is an ultra-low-power 32-bit device intended for compact embedded systems. The identified power-supply levels are 2.5 V and 3.3 V, while RAM capacity, exact temperature limits, and detailed peripheral ratings should be confirmed in the manufacturer datasheet.
Where can I download the STM32L151VBH6 datasheet PDF?
The STM32L151VBH6 datasheet can be reached through the manufacturer-linked product resources and the distributor documentation listed on this page. The datasheet PDF identifies the device as a 32 MHz ARM Cortex-M3 microcontroller with 128 KB of flash in a 100-UFBGA package. Use the manufacturer datasheet as the controlling document for the complete pin-description table, memory map, electrical limits, peripheral list, and recommended operating conditions.
Where can I find the STM32L151VBH6 pinout?
Use the pin-description table in the manufacturer datasheet to locate the STM32L151VBH6 pinout because it is a 100-pin BGA package with closely spaced contacts. The package itself is identified as 100-UFBGA in a 7 x 7 mm outline. Assign PCB tracks from the exact package pin table and land pattern rather than relying on a generic BGA drawing, and include every ball in the PCB library even when its assigned function is unused.
What is the power supply requirement for STM32L151VBH6?
The STM32L151VBH6 is identified for 2.5 V and 3.3 V operation. According to the manufacturer datasheet, the device belongs to the STM32L1 ultra-low-power family, so its low-power modes are central to energy-sensitive designs. Before circuit implementation, confirm the exact operating ranges, internal regulator behavior, external component requirements, and decoupling values in the electrical-characteristics and application-information sections of the manufacturer datasheet.
Is STM32L151VBH6 suitable for low-power sensor applications?
Yes, the STM32L151VBH6 is suitable for low-power sensor applications because it is an ultra-low-power 32-bit Cortex-M3 device with 128 KB of flash and a maximum clock of 32 MHz. Its processing capacity can support acquisition logic, filtering, local configuration, and communication firmware, while its low-power operating modes can reduce consumption during inactive periods. Sleep duration, wake-up time, and sensor duty cycle should be evaluated with the complete system load.
What is the difference between STM32L151VBH6 and STM32L152VBH6?
The STM32L151VBH6 is the baseline STM32L1 device in this comparison, while the STM32L152VBH6 adds the family’s hardware cryptographic capability. Both retain the 32-bit ARM Cortex-M3 architecture, 128 KB flash configuration, and 100-UFBGA package option represented by the VB suffix. The exact peripheral differences should be checked in the manufacturer family documentation, and firmware should be reviewed for any peripheral or cryptographic-resource changes before substitution.
STM32L151VBH6 vs STM32L162VBH6 - which is better for USB designs?
STM32L162VBH6 is the more relevant choice when a design requires the STM32L1 family member with dedicated USB support, while STM32L151VBH6 remains appropriate for designs that do not need that interface. Both parts use the same 100-pin BGA package family and 32-bit Cortex-M3 architecture, so the decisive factors are USB hardware, peripheral complement, firmware support, and qualification. Confirm the exact pin assignments and USB electrical requirements in the manufacturer datasheet.
When should I choose STM32L151VBH6 over STM32L151VBU6?
Choose STM32L151VBH6 when the design requires the higher-temperature grade represented by the H suffix; choose STM32L151VBU6 when the operating environment remains within the lower-temperature grade represented by U. Both retain the same STM32L151 function set and 100-UFBGA footprint option, making the temperature rating the principal selection point. Confirm exact limits, voltage behavior, and qualification details before approving either device.
What can replace the STM32L151VBH6?
The STM32L152VBH6, STM32L162VBH6, STM32L152VBU6, STM32L162VBU6, and STM32L151VBU6 are same-brand STM32L1-family drop-in candidates with the 100-pin BGA footprint and closely matched core and flash configuration. A valid replacement still requires checking temperature grade, supply range, peripheral population, pin multiplexing, boot behavior, and firmware dependencies. Treat peripheral and grade differences as design-review items rather than assuming every firmware image transfers unchanged.
Is STM32L151VBH6 the same as STM32L151VBH6TR?
STM32L151VBH6 and STM32L151VBH6TR identify the same STM32L151VBH6 device configuration, while the TR suffix indicates tape-and-reel shipping format rather than a different electrical design. The exact MPN on this page is STM32L151VBH6, which is identified with tray packaging. For manufacturing, use the shipping format required by your pick-and-place and reel-handling process without confusing packaging suffix changes with functional alternatives.
Where can I buy STM32L151VBH6 online?
Use the Request a Quote form on this page to request STM32L151VBH6 availability, lead time, and order details. The part is an active catalog MCU with a 100-UFBGA package, so quotation should identify the exact MPN, quantity, tray or reel requirement, and target delivery date. Current supply status and production scheduling should be confirmed through the quotation process because inventory and lead time can change.
What is the price of STM32L151VBH6?
Current STM32L151VBH6 pricing is available through the Request a Quote form on this page. The structured listing data records a reference unit price of USD 5.6557 as of 2026-11, but that figure is not a quotation and may not reflect quantity, packaging, or current availability. Submit the required quantity, packaging format, and destination for a current commercial response.
Is STM32L151VBH6 in stock and what is its lead time?
Current stock and lead time for STM32L151VBH6 should be requested through the Request a Quote form on this page. The manufacturer listing identifies the exact 100-UFBGA device as an STM32L1 microcontroller with 128 KB of flash, while a distributor result also identifies an in-stock listing for the exact MPN. That point-in-time listing does not establish future allocation, so confirm quantity and timing when placing the order.
What is the best cross-brand equivalent for STM32L151VBH6?
No cross-brand drop-in equivalent is established by the manufacturer information for the STM32L151VBH6. Cross-vendor Cortex-M3 devices can share a 100-pin BGA outline while differing in clocking, memory, interrupt mapping, peripherals, low-power behavior, and development-tool support, so footprint similarity alone is insufficient. A second source should be treated as a redesign unless its manufacturer explicitly confirms pin-to-pin compatibility and your engineering team validates the electrical and firmware differences.

Technische Referenzdaten für STM32L151VBH6 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose STM32L151VBH6 for compact, low-power embedded systems that need a 32 MHz ARM Cortex-M3 core, 128 KB of flash, and a 100-UFBGA footprint without dedicated USB or hardware cryptographic functions. Select STM32L162VBH6 when USB capability is required, and select STM32L152VBH6 when the design needs hardware cryptographic acceleration. STM32L151VBU6 is appropriate when the lower temperature grade is sufficient; the VBU6 versions of the L152 and L162 similarly trade temperature capability for specialized peripherals. For every candidate, verify the exact supply range, peripheral population, pin multiplexing, boot configuration, firmware dependencies, and package land pattern. Cross-brand alternatives should not be assumed drop-in compatible solely because they use a Cortex-M3 core or a similar BGA outline.

Vergleich mit Alternativen

Parameter Dieses Produkt STM32L152VBH6 STM32L162VBH6 STM32L151VBU6 STM32L152VBU6 STM32L162VBU6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 100-UFBGA (7x7) 100-UFBGA (7x7) 100-UFBGA (7x7) 100-UFBGA (7x7) 100-UFBGA (7x7) 100-UFBGA (7x7)
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB
Data Bus Width 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit
Temperature Grade H grade H grade H grade U grade U grade U grade
Specialized Capability Baseline STM32L1 feature set Hardware cryptographic capability USB capability Baseline STM32L1 feature set Hardware cryptographic capability USB capability

Wichtigste Unterscheidungsmerkmale

  • Higher temperature-grade selection (vs. STM32L151VBU6)
  • Baseline architecture without specialized USB hardware (vs. STM32L162VBH6)
  • Simpler baseline security implementation (vs. STM32L152VBH6)

Designhinweise

Create the land pattern from the manufacturer’s STM32L151 100-UFBGA documentation rather than from a generic 100-ball BGA library. The package is only 7 x 7 mm, so pad geometry, solder-mask definition, trace width, and escape routing are tightly coupled. Confirm whether exposed or ground balls are used, preserve the specified solder-mask and paste-land tolerances, and validate the complete footprint with the PCB manufacturer’s assembly process before releasing artwork.

Route each supply connection directly to its corresponding power ball with a short path, and place the required bypass capacitors close to the device-side pads. Separate noisy switching nodes from analog inputs and keep the ground return beneath signal routes continuous. Because the MCU is intended for 2.5 V and 3.3 V systems, verify startup, brownout behavior, external regulator tolerance, and the selected internal regulator mode against the manufacturer electrical-characteristics table rather than assuming either voltage is interchangeable under all load conditions.

Assign peripheral pins only after checking the exact 100-ball pin-description table, including alternate functions, debug signals, boot pins, and pins reserved for supply or ground. This is especially important when replacing STM32L151VBH6 with STM32L152VBH6 or STM32L162VBH6, whose specialized peripherals can change the recommended function assignment. Record the alternate-function and remap configuration in firmware alongside the schematic so board and software reviews can detect conflicts.

Validate junction temperature using the actual board construction, copper area, airflow, and surrounding heat sources. A compact 7 x 7 mm BGA transfers heat through its solder balls and package, so thermal performance depends on the PCB rather than the package outline alone. Use the manufacturer power-consumption and thermal data for the selected operating mode, and add thermal relief or copper spreading where the calculated operating margin is limited.

Do not treat identical BGA outlines as proof of unconditional firmware compatibility. Before changing from STM32L151VBH6 to an STM32L152, STM32L162, or different temperature-grade variant, compare boot configuration, clock tree, interrupt vectors, peripheral availability, analog functions, low-power behavior, and startup code. Build a hardware validation board and run representative workloads to confirm timing, RF-adjacent noise behavior, and system power consumption.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The exact manufacturer compliance declarations were not present in the product details. The STM32L151 is a general-purpose microcontroller, so AEC-Q100 is recorded as not_applicable rather than qualified.

Daten verifiziert am: 2026-11-14 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

STM32L151VBH6 STM32L151VBH6 datasheet STM32L151VBH6 pinout STM32L151VBH6 datasheet pdf STM32L151VBH6 100-UFBGA STM32L151VBH6 128KB flash STM32L151VBH6 32MHz STM32L151VBH6 equivalent STM32L151VBH6 replacement STM32L151VBH6 footprint STM32L151VBH6 application circuit STM32L151VBH6 vs STM32L162VBH6 STM32L151VBH6 price STMicroelectronics STM32L151VBH6

Verwandte Bauteile & Begriffe

STMicroelectronics STM32L151VBH6 STM32L152VBH6 STM32L162VBH6 STM32L151VBU6 STM32L152VBU6 STM32L162VBU6 STM32L1 ARM Cortex-M3 microcontroller 32-bit microcontroller embedded system ultra-low-power design 128 KB flash memory 32 MHz clock 100-UFBGA 7 x 7 mm package BGA package surface-mount package industrial sensor building control wireless gateway condition monitoring low-power mode
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen