STM8S105S6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics
Teilenummer: STM8S105S6T6 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.35 | $2,35 |
| 10 | $2.1 | $21,00 |
| 100 | $1.85 | $185,00 |
| 500 | $1.6 | $800,00 |
| 1.000 | $1.45 | $1.450,00 |
STM8S105S6T6 Übersicht
An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, designed for cost-sensitive control applications. It typically integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals such as timers, UART, SPI, and ADC on a single die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, lower power consumption, and simpler development, making it ideal for applications like home appliances, industrial control, and consumer electronics.
Key features of the STM8S105S6T6 include a 10-bit ADC with up to 10 channels, multiple 16-bit timers, a UART, SPI, and I2C interfaces, and an integrated EEPROM for data storage. The STM8 core is CISC-based with a pipeline architecture, achieving 16 MIPS at 16 MHz. The device supports a wide operating voltage range of 2.95V to 5.5V, ensuring compatibility with both 3.3V and 5V systems.
The STM8S105S6T6 is part of the STM8S105xx medium-density family, which offers from 16 to 32 Kbytes of Flash. It is pin-compatible with other STM8S105 devices, allowing easy migration between memory sizes. The integrated EEPROM eliminates the need for external EEPROM chips, reducing BOM cost and board space. The device also features robust ESD protection and a wide operating temperature range of -40°C to +85°C.
Typical applications include home appliances (washing machines, air conditioners), industrial control (motor control, sensors), and consumer electronics (remote controls, power tools). The rich peripheral set and low cost make it a popular choice for high-volume applications. The 44-pin LQFP package provides a good balance between I/O count and board space.
When designing with this MCU, ensure proper decoupling of the power supply with 100nF and 10uF capacitors close to the VDD pins. The STM8S105S6T6 supports in-circuit programming and debugging via SWIM, simplifying firmware development. For low-power applications, use the HALT and WAIT modes to reduce current consumption.
Drop-in-Alternativen für STM8S105S6T6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
STM8S105S6T6C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM8S105S4T6
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM8S105S6T6B
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
N76E885AT20
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
EFM8BB21F16G-A-QFN28
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
STM8S105S6T6 Grenzwerte & elektrische Eigenschaften
| Core | STM8 |
| Architecture | 8-bit CISC |
| Maximale Taktfrequenz | 16 MHz |
| Flash Program Memory | 32 Kbytes |
| RAM | 2 Kbytes |
| EEPROM | 1 Kbyte (true data EEPROM) |
| Supply Voltage Range | 2.95 V to 5.5 V |
| ADC | 10-bit, up to 10 channels |
| Timers | Multiple 16-bit timers |
| UART | 1 |
| SPI | 1 |
| I2C | 1 |
| Gehäuse | LQFP-44 |
| Montageart | Surface Mount |
| Betriebstemperaturbereich | -40°C to +85°C |
| RoHS-Status | Compliant |
STM8S105S6T6 Pin-Konfiguration
| Pin 1 | PD0 — GPIO / SPI NSS |
| Pin 2 | PD1 — GPIO / SPI SCK |
| Pin 3 | PD2 — GPIO / SPI MOSI |
| Pin 4 | PD3 — GPIO / SPI MISO |
| Pin 5 | PD4 — GPIO / UART TX |
| Pin 6 | PD5 — GPIO / UART RX |
| Pin 7 | PD6 — GPIO / I2C SCL |
| Pin 8 | PD7 — GPIO / I2C SDA |
| Pin 9 | VSS — Ground |
| Pin 10 | VDD — Power supply (3.3V or 5V) |
| Pin 11 | PA0 — GPIO / ADC input |
| Pin 12 | PA1 — GPIO / ADC input |
| Pin 13 | PA2 — GPIO / ADC input |
| Pin 14 | PA3 — GPIO / ADC input |
| Pin 15 | PA4 — GPIO / ADC input |
| Pin 16 | PA5 — GPIO / ADC input |
| Pin 17 | PA6 — GPIO / ADC input |
| Pin 18 | PA7 — GPIO / ADC input |
| Pin 19 | PB0 — GPIO / Timer input |
| Pin 20 | PB1 — GPIO / Timer input |
| Pin 21 | PB2 — GPIO / Timer input |
| Pin 22 | PB3 — GPIO / Timer input |
| Pin 23 | PB4 — GPIO / Timer input |
| Pin 24 | PB5 — GPIO / Timer input |
| Pin 25 | PB6 — GPIO / Timer input |
| Pin 26 | PB7 — GPIO / Timer input |
| Pin 27 | PC0 — GPIO / Timer output |
| Pin 28 | PC1 — GPIO / Timer output |
| Pin 29 | PC2 — GPIO / Timer output |
| Pin 30 | PC3 — GPIO / Timer output |
| Pin 31 | PC4 — GPIO / Timer output |
| Pin 32 | PC5 — GPIO / Timer output |
| Pin 33 | PC6 — GPIO / Timer output |
| Pin 34 | PC7 — GPIO / Timer output |
| Pin 35 | NRST — Reset (active low) |
| Pin 36 | VSS — Ground |
| Pin 37 | VDD — Power supply |
| Pin 38 | PE0 — GPIO / SWIM |
| Pin 39 | PE1 — GPIO |
| Pin 40 | PE2 — GPIO |
| Pin 41 | PE3 — GPIO |
| Pin 42 | PE4 — GPIO |
| Pin 43 | PE5 — GPIO |
| Pin 44 | PE6 — GPIO |
Typische Anwendungen
STM8S105S6T6 ist geeignet für 6 Anwendungs: Home Appliances, Industrial Control, Consumer Electronics, Automotive Aftermarket, IoT and Smart Home, Power Tools.
Home Appliances
The STM8S105S6T6 is ideal for home appliances such as washing machines, air conditioners, and refrigerators. Its 16 MHz STM8 core provides sufficient processing power for motor control, sensor reading, and user interface management. The integrated EEPROM stores calibration data and user settings, while the 10-bit ADC reads temperature and pressure sensors. The UART and I2C interfaces enable communication with display modules and other peripherals. The wide operating voltage range (2.95V to 5.5V) allows direct connection to 5V sensors and relays without level shifting. The low cost and high reliability make it a popular choice for high-volume consumer appliances.
Empfohlen
Industrial Control
In industrial control systems, the STM8S105S6T6 handles tasks such as motor control, process monitoring, and safety interlocks. Its multiple 16-bit timers generate precise PWM signals for motor speed control, while the 10-bit ADC samples analog sensors for temperature, pressure, and flow. The UART interface connects to industrial networks like RS-485 via external transceivers. The device's robust ESD protection and wide temperature range (-40°C to +85°C) ensure reliable operation in harsh factory environments. The integrated EEPROM stores configuration parameters and fault logs, reducing external component count. The STM8 core's deterministic execution is well-suited for real-time control loops.
Empfohlen
Consumer Electronics
The STM8S105S6T6 is widely used in consumer electronics like remote controls, power tools, and small appliances. Its low cost and small footprint (LQFP-44) make it ideal for space-constrained designs. The device's low-power modes (HALT and WAIT) extend battery life in portable devices. The SPI and I2C interfaces connect to displays, EEPROMs, and sensors. The 10-bit ADC reads battery voltage for fuel gauging. The integrated EEPROM stores user preferences and device settings. The STM8 core's efficient instruction set reduces code size, allowing more features in limited Flash memory.
Empfohlen
Automotive Aftermarket
While not AEC-Q100 qualified, the STM8S105S6T6 is used in automotive aftermarket products like car alarm systems, window controllers, and dashboard displays. Its 5V operation allows direct interfacing with automotive 12V systems via voltage regulators. The UART interface communicates with GPS modules and OBD-II adapters. The 10-bit ADC reads sensor inputs like temperature and light levels. The device's robust design withstands the vibration and temperature extremes found in vehicles. For production automotive applications, ST recommends the AEC-Q100 qualified STM8S105x4/6 variants.
Empfohlen
IoT and Smart Home
The STM8S105S6T6 serves as a cost-effective MCU for IoT edge nodes and smart home devices. Its low power consumption in HALT mode (typically a few microamps) enables battery-powered sensors. The UART or SPI interface connects to Wi-Fi or BLE modules for cloud connectivity. The 10-bit ADC reads environmental sensors like temperature, humidity, and light. The integrated EEPROM stores device credentials and sensor calibration. The small LQFP-44 package fits into compact smart home devices like thermostats, smart plugs, and security sensors. The STM8 core's simplicity reduces firmware development time.
Empfohlen
Power Tools
The STM8S105S6T6 is used in power tools like drills, saws, and grinders for motor control and safety features. Its 16 MHz core and 16-bit timers generate high-frequency PWM for brushless DC motor control. The 10-bit ADC monitors current and temperature for overload protection. The UART interface allows firmware updates via a programming tool. The device's wide voltage range (2.95V to 5.5V) accommodates battery packs from 3.6V to 5V. The robust design handles the vibration and shock typical of power tools. The integrated EEPROM stores tool settings and usage logs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für STM8S105S6T6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | STM8S105S6T6C | STM8S105S4T6 | N76E885AT20 |
|---|---|---|---|---|
| Package | LQFP-44 | LQFP-44 - same | LQFP-44 - same | LQFP-44 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Nuvoton |
| Core | STM8 (8-bit CISC) | STM8 (8-bit CISC) | STM8 (8-bit CISC) | 8051 (8-bit CISC) |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 32 KB | 32 KB | 16 KB | 18 KB |
| RAM | 2 KB | 2 KB | 2 KB | 1 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 4 KB |
| ADC | 10-bit, 10 channels | 10-bit, 10 channels | 10-bit, 10 channels | 12-bit, 8 channels |
| Supply Voltage Range | 2.95V to 5.5V | 2.95V to 5.5V | 2.95V to 5.5V | 2.4V to 5.5V |
Wichtigste Unterscheidungsmerkmale
- Integrated true data EEPROM (vs. N76E885AT20)
- STM8 core with CISC architecture (vs. N76E885AT20)
- Wide operating voltage range (vs. EFM8BB21F16G-A-QFN28)
Designhinweise
Decouple the VDD pins with a 100nF ceramic capacitor and a 10uF electrolytic capacitor placed as close to the pins as possible. The STM8S105S6T6 operates from 2.95V to 5.5V, so ensure the supply is stable and within this range. For noisy environments, add a ferrite bead in series with VDD to filter high-frequency noise.
For the LQFP-44 package, ensure proper solder paste stencil design to avoid bridging between pins. Use a 0.5mm pitch footprint with appropriate pad sizes. Place the crystal oscillator (if used) close to the OSC pins and keep the trace lengths short. Provide a solid ground plane under the MCU to reduce EMI.
Do not leave the NRST pin floating; connect it to VDD through a 100nF capacitor and a 10k ohm resistor to avoid spurious resets. The SWIM pin (PE0) is used for programming and debugging; ensure it is accessible on the PCB. When using the ADC, avoid routing high-speed digital traces near the analog input pins to prevent noise coupling.
Compliance-Informationen
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive use, select STM8S105x4/6 automotive variants.
