Microchip Technology

SY88973VMI 3.2Gbps CML Limiting Post Amplifier | Microchip

Teilenummer: SY88973VMI ✓ Aktiv
3.3 V ±10% or 5 V ±10% Vdss 16-MLF, 3x3 mm Package
MOQ: 1 |

SY88973VMI Übersicht

The Microchip SY88973VMI is a 3.3V/5V, 3.2Gbps CML low-power limiting post amplifier with TTL LOS output, packaged in a 16-MLF 3x3 mm surface-mount package. It is designed for fiber-optic receivers that use transimpedance amplifiers, where noisy or variable-amplitude analog signals must be quantized into clean digital waveforms before reaching a CML or AC-coupled PECL input. The device accepts signals as small as 10mVPP and produces a typical 800mVPP voltage-limited output. Operating from a single +3.3V ±10% or +5V ±10% supply, the SY88973VMI supports an industrial temperature range from -40°C to +85°C.

A limiting post amplifier is a specialized high-speed amplifier stage used between an optical receiver’s analog front end and its digital processing circuitry. Its role in the signal chain is not simply to increase voltage: it converts a noisy, variable-amplitude signal into a stable digital-level output suitable for high-speed logic. The SY88973VMI is commonly placed after a transimpedance amplifier in optical communication systems, including optical network equipment and high-speed fiber-optic links.

The SY88973VMI provides low-power operation, wide signal bandwidth, and high gain sufficient for 3.2Gbps data-rate applications. Its output stage is designed to drive CML inputs or AC-coupled PECL inputs, while the TTL LOS output provides a convenient loss-of-signal indication for downstream monitoring or system control. The 3.3V and 5V supply compatibility allows the same device family to be used across different optical receiver designs.

The limiting function improves signal integrity by reducing amplitude variation at the receiver’s digital interface. The output is typically a voltage-limited waveform with approximately 800mVPP amplitude, making it suitable for high-speed differential signaling after suitable coupling and termination arrangements. The device is intended for use with a transimpedance amplifier rather than as a general-purpose precision amplifier.

Typical applications include optical network transceivers, fiber-optic receiver modules, PON equipment, telecommunications line cards, and industrial high-speed optical links. In these systems, the SY88973VMI converts the TIA output into a standardized digital signal while providing a separate loss-of-signal status output. Its 16-MLF 3x3 mm package supports compact transceiver layouts, although careful high-speed layout and thermal verification remain important.

For implementation, place the amplifier close to the receiver TIA and maintain short, controlled-impedance connections for the high-speed differential path. Confirm that the selected external network matches the CML or AC-coupled PECL interface, and use the TTL LOS output only after checking its polarity and timing in the system-level design. The compact package also requires attention to solder-joint inspection, via placement around exposed thermal features, and production test coverage.

This product page consolidates the device’s verified electrical ratings, package information, application guidance, pinout limitations, and drop-in alternative status. It also highlights practical signal-integrity and design considerations that help engineers move from component selection to a robust fiber-optic receiver implementation.

Drop-in-Alternativen für SY88973VMI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

SY88973VMI-TR

✅ Drop-In
📦 16-MLF (3x3 mm)
Same 16-MLF 3x3 mm limiting-post-amplifier package and function; ordering suffix differs, with no confirmed electrical difference stated

📋 Referenzalternative (nicht im Katalog)

SY88973VMI Grenzwerte & elektrische Eigenschaften

Product Type CML low-power limiting post amplifier
Supported Data Rate Up to 3.2 Gbps
Versorgungsspannung 3.3 V ±10% or 5 V ±10%
Betriebstemperaturbereich -40°C to +85°C
Input Signal Sensitivity 10 mVPP minimum
Typical Output Amplitude 800 mVPP
Output Interface CML or AC-coupled PECL
Loss-of-Signal Output TTL LOS
Application Fiber-optic receivers
Compatible Front End Transimpedance amplifier
Gehäuse 16-MLF, 3x3 mm
Montageart Surface mount
Temperature Grade Industrial temperature range
Pin-Anzahl 16 pins

SY88973VMI 16-mlf, 3x3 mm Pinbelegungsleitfaden

Pinbelegung für SY88973VMI (16-mlf, 3x3 mm-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für SY88973VMI im 16-mlf, 3x3 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SY88973VMI.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SY88973VMI ist geeignet für 6 Anwendungs: Fiber-Optic Receiver Modules, Optical Network Transceivers, PON Equipment, Telecommunications Line Cards, High-Speed Data Links, Industrial Optical Monitoring.

🌐

Fiber-Optic Receiver Modules

The SY88973VMI fits immediately after a transimpedance amplifier in a compact optical receiver module. It can qualify signals as small as 10mVPP and produce a typical 800mVPP voltage-limited waveform for CML or AC-coupled PECL logic inputs. At data rates up to 3.2Gbps, the device consolidates limiting and signal conditioning near the TIA, reducing the distance over which the noisy analog waveform travels. Its 16-MLF 3x3 mm package also supports compact transceiver layouts.

🌐

Optical Network Transceivers

The SY88973VMI is appropriate for optical network transceiver receive paths requiring a dedicated CML limiting stage. A TIA first converts the photodetector current into a voltage, and the SY88973VMI then converts the noisy analog result into a stable digital-level signal. Supporting both 3.3V ±10% and 5V ±10% supplies provides flexibility across receiver designs, while the TTL LOS output lets the host equipment identify loss of signal without a separate detector circuit.

🏭

PON Equipment

Passive optical network equipment can use the SY88973VMI to condition the receive-side signal before it reaches a high-speed digital engine. Its 3.2Gbps capability accommodates demanding optical links, and the limiting action reduces amplitude variation caused by noise and changing TIA output levels. The compact 3x3 mm MLF package is useful in line cards and compact subscriber-access equipment, provided that the high-speed trace layout and termination network follow the manufacturer interface guidance.

📡

Telecommunications Line Cards

The SY88973VMI serves as a receiver-side limiting amplifier in telecommunications line cards where optical data is converted from an analog TIA waveform into logic-compatible levels. Its low-power CML architecture is intended for high-speed signal chains, and the 3.3V or 5V operating range supports different board power plans. The TTL LOS indication provides a useful supervisory signal for fault management, while the small package helps preserve board area in multi-channel equipment.

🖥️

High-Speed Data Links

The SY88973VMI can be used in a fiber-based high-speed data link whenever the receiver front end uses a TIA followed by a CML limiting stage. Its bandwidth and gain are specified for signals up to 3.2Gbps, and the minimum 10mVPP input sensitivity allows weak post-TIA signals to be qualified. The key layout requirement is to keep the controlled-impedance connection from the TIA to the amplifier short, then terminate the differential output according to the selected CML or AC-coupled PECL interface.

🏭

Industrial Optical Monitoring

Industrial optical monitoring systems can use the SY88973VMI when a received signal must be converted to a stable digital waveform and monitored for signal loss. The -40°C to +85°C operating range covers industrial temperature requirements, and the TTL LOS output provides a direct supervisory indication. The device remains a specialized receiver-stage component, so system designers should pair it with an appropriate TIA and verify the external termination and coupling components against the operating data rate.

Zusammenfassung der empfohlenen Produkte

SY88973VMI-TR Same-family orderable suffix Verwendet in: Fiber-Optic Receiver Modules, Optical Network Transceivers, PON Equipment, Telecommunications Line Cards, High-Speed Data Links, Industrial Optical Monitoring
What is the SY88973VMI used for?
The SY88973VMI is a 3.3V/5V limiting post amplifier used in fiber-optic receivers. According to the Micrel datasheet, it accepts the linear output of a transimpedance amplifier, quantizes noisy or variable-amplitude signals, and generates a typical 800mVPP voltage-limited output suitable for CML inputs or AC-coupled PECL inputs. It also provides a TTL loss-of-signal output for receiver monitoring.
What is the operating voltage of the SY88973VMI?
The SY88973VMI operates from a single +3.3V ±10% or +5V ±10% supply. The manufacturer datasheet identifies both supply options, allowing the same limiting amplifier to support different optical receiver architectures. Because the device is not a dual-supply part, the input and output interface must be referenced to the same system ground and configured for the selected supply voltage.
What data rate does the SY88973VMI support?
The SY88973VMI supports data rates up to 3.2Gbps. The Micrel datasheet describes a low-power limiting post amplifier with wide bandwidth and high gain for optical receiver applications. The device can amplify signals as small as 10mVPP and produce a typical 800mVPP voltage-limited waveform, making it appropriate for high-speed optical network receiver stages.
Where can I download the SY88973VMI datasheet PDF?
The official SY88973VMI datasheet PDF is available from Microchip at the manufacturer URL listed on this page. The document describes the 3.3V/5V supply range, 3.2Gbps operation, typical 800mVPP output, TTL LOS function, package, and electrical characteristics. Use the pin-description table and recommended application information in that document when laying out the receiver circuit.
Where is the SY88973VMI pinout located?
The SY88973VMI pinout is documented in the manufacturer datasheet under the 16-MLF package and pin-description information. The device uses a 16-MLF 3x3 mm package, while the public package library does not provide a verified pin-level diagram for this exact package. Use the manufacturer pin table to assign supply, ground, signal, and TTL LOS connections before fabrication.
Can the SY88973VMI be used with a transimpedance amplifier?
Yes, the SY88973VMI is specifically designed to follow a transimpedance amplifier in a fiber-optic receiver. The manufacturer describes the TIA output as potentially containing substantial noise and amplitude variation; the limiting post amplifier quantizes that waveform into a typical 800mVPP voltage-limited signal. This arrangement separates analog gain and light-to-current conversion from digital-level signal conditioning.
What is the difference between SY88973VMI and SY88973VMI-TR?
SY88973VMI-TR is the orderable suffix associated with the same 16-MLF 3x3 mm limiting post amplifier family, while SY88973VMI is the base ordering code used in the product designation. The distributor listing for SY88973VMI-TR identifies it as the 16-MLF version for optical networks. The exact reel, temperature, or packing interpretation should be confirmed against the manufacturer ordering information before substitution.
What can replace the SY88973VMI?
The SY88973VMI-TR is the identified same-brand drop-in candidate with the same 16-MLF 3x3 mm package and the same limiting-post-amplifier function. No verified cross-brand equivalent with a confirmed pin-to-pin footprint was identified. For a design requiring a different vendor, verify the complete pin map, supply range, data rate, output interface, and LOS timing before treating any part as a replacement.
Is the SY88973VMI suitable for 5V optical receiver designs?
Yes, the SY88973VMI supports a +5V ±10% supply and is intended for high-speed optical receiver signal conditioning. The output can drive CML inputs or AC-coupled PECL inputs, while the TTL LOS output supports loss-of-signal monitoring. Confirm the receiver’s voltage levels and termination network, especially when the upstream transimpedance amplifier operates from a different supply.
How should the SY88973VMI be laid out on a PCB?
Place the SY88973VMI close to the receiving transimpedance amplifier and keep the high-speed signal path short and impedance controlled. Route the differential output as a controlled-impedance pair, provide the required local supply bypassing, and use the manufacturer’s recommended interface network for CML or AC-coupled PECL termination. Avoid long stubs and unnecessary test pads that can increase reflections at 3.2Gbps.
Does the SY88973VMI provide loss-of-signal detection?
Yes, the SY88973VMI includes a TTL loss-of-signal output. The Micrel datasheet identifies the device as a 3.3V/5V 3.2Gbps CML low-power limiting post amplifier with TTL LOS. The LOS signal is intended for system monitoring and should be evaluated for correct polarity, assertion level, and timing in the complete optical receiver.
What is the best drop-in replacement for SY88973VMI?
SY88973VMI-TR is the strongest verified drop-in option because it uses the same Microchip 16-MLF 3x3 mm package and the same optical-network limiting-post-amplifier function. No additional same-package alternatives with confirmed electrical and pin compatibility were established. For an exact drop-in decision, verify the manufacturer ordering suffix, temperature range, and the board’s pin-to-pin connection pattern.
SY88973VMI vs SY88973VMI-TR: which should be selected?
Choose the ordering suffix that matches the manufacturer’s package, temperature, and packing requirements for the production build. SY88973VMI and SY88973VMI-TR are closely related designations for the 16-MLF 3x3 mm limiting post amplifier, so their core function and package are the same. The exact suffix availability should be confirmed through the Request a Quote form on this page.
When should I choose the SY88973VMI instead of a generic amplifier?
Choose the SY88973VMI when the signal path specifically requires a limiting, high-speed CML output after a fiber-optic transimpedance amplifier. A generic amplifier may offer adjustable gain or linearity, but it does not provide the same combination of 3.2Gbps signal qualification, typical 800mVPP limiting output, and TTL LOS monitoring. The dedicated receiver architecture reduces design complexity when those functions are required.
Where can I buy SY88973VMI and check its lead time?
Use the Request a Quote form on this page to request SY88973VMI pricing, stock confirmation, and current lead time. The component is offered in a 16-MLF 3x3 mm surface-mount package for optical receiver designs. For production planning, specify the required quantity, package variant, and destination so the quote can reflect the correct commercial configuration.

Technische Referenzdaten für SY88973VMI – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SY88973VMI when designing a fiber-optic receiver in which a transimpedance amplifier feeds a high-speed CML limiting stage. It is particularly appropriate for links operating up to 3.2Gbps, receivers using either 3.3V or 5V supplies, and systems that require a separate TTL LOS indication. The 16-MLF 3x3 mm package helps reduce receiver-board area, but correct high-speed layout and external termination remain essential. SY88973VMI-TR is the available same-brand drop-in candidate when the ordering suffix, temperature grade, and packing configuration match the production requirement. No cross-brand drop-in option with confirmed pin-to-pin compatibility was established, so an alternative manufacturer should be treated as a new design unless its complete electrical and package details are independently verified. For non-optical or adjustable-gain applications, a general-purpose high-speed amplifier may be more appropriate than this dedicated limiting post amplifier.

Vergleich mit Alternativen

Parameter Dieses Produkt SY88973VMI-TR
Brand Microchip Technology Microchip Technology
Package 16-MLF (3x3 mm) 16-MLF (3x3 mm)
Product Type Limiting post amplifier Limiting post amplifier

Wichtigste Unterscheidungsmerkmale

  • Integrated optical-receiver signal conditioning (vs. SY88973VMI-TR)
  • Broad receiver supply compatibility (vs. SY88973VMI-TR)
  • Designed for weak post-TIA signals (vs. SY88973VMI-TR)

Designhinweise

Place the SY88973VMI close to the transimpedance amplifier output and keep the connection between them short. At data rates up to 3.2Gbps, trace discontinuities, long branches, and poorly positioned test pads can introduce reflections that degrade the TIA waveform before limiting occurs. Use a controlled-impedance board stack-up and preserve the manufacturer interface-network geometry.

Configure the output for either CML or AC-coupled PECL according to the receiving logic, and use the corresponding termination and coupling values from the manufacturer datasheet. The SY88973VMI produces a typical 800mVPP voltage-limited waveform; treating this as a generic single-ended amplifier can lead to incorrect termination, excessive overshoot, or an incompatible logic threshold.

Decouple the 3.3V or 5V supply close to the device with the capacitance and placement recommended in the manufacturer application information. Keep high-current return paths away from sensitive receiver nodes, and verify supply tolerance across the full operating range. The 3.3V ±10% and 5V ±10% requirements should be checked at every board-level power condition.

Do not substitute a general-purpose amplifier for the SY88973VMI without redesigning the interface. The dedicated device provides limiting behavior, CML-compatible output, and TTL LOS in one package. Also verify the exact ordering suffix and manufacturer pin description before layout release, because the public product snippets do not expose the complete pin map for the 16-MLF package.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer documentation identifies the SY88973VMI as an industrial-temperature optical receiver amplifier, but no explicit environmental-compliance declarations were available for extraction.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

SY88973VMI datasheet SY88973VMI pinout SY88973VMI datasheet pdf Microchip SY88973VMI SY88973VMI 3.2Gbps amplifier SY88973VMI 16-MLF package SY88973VMI optical receiver SY88973VMI CML post amplifier SY88973VMI vs SY88973VMI-TR SY88973VMI drop-in replacement SY88973VMI equivalent SY88973VMI price SY88973VMI stock SY88973VMI TTL LOS

Verwandte Bauteile & Begriffe

Microchip Technology Micrel Semiconductor SY88973VMI SY88973VMI-TR CML PECL TTL LOS limiting post amplifier high-speed amplifier fiber-optic receiver optical network transimpedance amplifier TIA 3.2Gbps 3.3V 5V 10mVPP 800mVPP 16-MLF QFN family surface mount signal integrity loss of signal industrial temperature range
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen