TMS320DM647ZUT7 - 720MHz 32-Bit DSP | Texas Instruments
Teilenummer: TMS320DM647ZUT7 ✓ AktivTMS320DM647ZUT7 Übersicht
A digital signal processor, or DSP, is a programmable semiconductor optimized for arithmetic-intensive operations on continuous streams of data. Unlike a general-purpose processor, a DSP typically uses parallel execution units, predictable instruction timing, dedicated addressing support, and hardware peripherals for moving and processing real-time data. Within the product hierarchy, the TMS320DM647 is a C64x+ digital media processor and a member of the Texas Instruments DSP family.
The TMS320DM647ZUT7 combines an eight-instruction-per-cycle C64x+ core with multimedia-oriented connectivity. According to the manufacturer product page, its video interface supports multiple resolutions and formats including CCIR601, ITU-BT.656, BT.1120, SMPTE 125M, 260M, 274M, and 296M. Its network subsystem includes a 1000 Mbps Ethernet switch with an MDIO management interface, one SGMII port, a VCXO interpolated control port, and a 4-bit video-port interface.
The 529-ball FCBGA package provides dense access to the processor, memory, video, and network interfaces, but it also makes careful PCB design and assembly essential. The TMS320DM647 family supports software compatibility with C64x code and debugging workflows, helping engineers reuse existing digital signal-processing libraries and development practices when scaling established designs to a multicore-capable media processor.
Typical uses include video-conferencing endpoints, industrial video systems, media gateways, network infrastructure equipment, image-processing pipelines, and embedded communications platforms. The 720 MHz clock and 5760 MIPS peak throughput suit workloads that combine filtering, transforms, color conversion, packet processing, and multimedia transport. Systems must provide suitable power rails, high-speed memory, controlled clocking, and a multilayer PCB capable of routing the wide external interfaces.
A key design consideration is that the processor's package is not a leaded component and cannot be assembled by conventional through-hole insertion. The 529-FCBGA land pattern, ball assignments, via requirements, reflow profile, and component spacing must follow the package documentation exactly. Clock quality, power sequencing, decoupling, and thermal management also require board-level validation before production deployment.
This product overview combines the manufacturer specifications, package information, interface capabilities, and practical implementation considerations needed to evaluate the TMS320DM647ZUT7. It also provides drop-in replacement guidance, application-focused design notes, and a parameter comparison framework for engineers comparing qualified ordering options or planning an early board redesign.
Drop-in-Alternativen für TMS320DM647ZUT7 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
TMS320DM647ZUTA8
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TMS320DM647CUT7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TMS320DM647ZUT7 Technische Daten
| Product Type | Digital media processor |
| Processor Architecture | C64x+ |
| Instruction Set | 32-bit fixed-point |
| Maximale Taktfrequenz | 720 MHz |
| Peak Processing Performance | 5760 MIPS |
| Execution Width | 8 x 32-bit instructions per cycle |
| C64x+ Instructions per Cycle | 8 instructions/cycle |
| Software Compatibility | Compatible with C64x code and debug |
| Ethernet Interface | 1000 Mbps Ethernet switch subsystem |
| SGMII Port Count | 1 port |
| Management Interface | MDIO |
| Video Interface | 4-bit video port |
| Supported Video Standards | CCIR601, ITU-BT.656, BT.1120, SMPTE 125M, 260M, 274M, and 296M |
| Clock Control | VCXO interpolated control port |
| Gehäuse | 529-pin FCBGA, 19 mm x 19 mm |
| Montageart | Surface mount |
| Betriebstemperaturbereich | 0 °C to 90 °C |
| Core Supply Voltage | 1.2 V |
| Shipping Format | Tray |
TMS320DM647ZUT7 529-pin fcbga, 19 mm x 19 mm Pinbelegungsleitfaden
Pinbelegung für TMS320DM647ZUT7 (529-pin fcbga, 19 mm x 19 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für TMS320DM647ZUT7.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
TMS320DM647ZUT7 ist geeignet für 6 Anwendungs: Video Conferencing Endpoint, Industrial Video Processing, Media Gateway, Network Image Processor, Communication Signal Processing, Medical Imaging Controller.
Video Conferencing Endpoint
The TMS320DM647ZUT7 fits video-conferencing endpoints that need real-time pixel processing, transport, and network control in one processor. Its C64x+ core executes eight 32-bit instructions per cycle at up to 720 MHz, while the listed video support includes ITU-BT.656 and SMPTE 260M, 274M, and 296M formats. The 4-bit video port can connect to compatible capture or display circuitry, and the 1000 Mbps Ethernet subsystem handles high-volume media traffic. Engineers should validate pixel-clock ratios, synchronization polarity, frame-buffer bandwidth, and codec scheduling against the exact video pipeline before production release.
Empfohlen
Industrial Video Processing
The TMS320DM647ZUT7 is suitable for industrial imaging systems that combine sensor capture, scaling, color conversion, and network transmission. At 720 MHz with 5760 MIPS of peak throughput, the C64x+ core can process multiple pipeline stages while the four video interfaces support multiple standard formats. The integrated 1000 Mbps Ethernet switch subsystem provides a path for low-latency transfer to upstream equipment, while MDIO supports management access. The design must still account for deterministic timing, external memory latency, thermal rise, and industrial temperature requirements of the complete system.
Empfohlen
Media Gateway
The TMS320DM647ZUT7 can serve as the central processor in a media gateway that ingests video, transforms encoded or decoded streams, and forwards traffic over a network. Its 720 MHz C64x+ execution core provides parallel arithmetic capacity, while the listed 4-bit video interface supports several digital video standards. A 1000 Mbps Ethernet subsystem and SGMII connectivity allow high-throughput packet handling without requiring a separate network-interface device. Practical implementation should partition CPU load carefully, preserve real-time deadlines, and verify memory bandwidth so video processing does not starve packet traffic.
Empfohlen
Network Image Processor
The TMS320DM647ZUT7 is appropriate for network appliances that perform image analysis, filtering, or format conversion on data received over Ethernet. Its 1000 Mbps Ethernet switch subsystem, MDIO management interface, and one SGMII port allow the DSP to combine network I/O with substantial fixed-point processing. The 5760 MIPS peak throughput leaves engineering headroom for parallel filters and pixel transformations, although actual sustained performance depends on memory access and accelerator use. A production design should benchmark complete data paths under worst-case packet rates and include network timing and memory arbitration in its validation matrix.
Empfohlen
Communication Signal Processing
The TMS320DM647ZUT7 can support communication systems that combine fixed-point signal processing with multimedia traffic. Eight 32-bit C64x+ instructions per cycle provide substantial throughput for filtering, modulation-related arithmetic, error processing, and protocol tasks. The 1000 Mbps Ethernet subsystem allows the same device to connect to network-facing equipment, while the video port can handle synchronized auxiliary media streams when required. Engineers should separate latency-critical signal paths from noncritical background work, control memory contention, and validate clock jitter and packet timing to preserve deterministic operation.
Empfohlen
Medical Imaging Controller
The TMS320DM647ZUT7 can serve as the processing controller in a medical imaging system where image acquisition, enhancement, compression, and transfer must be coordinated. Its C64x+ core provides eight parallel 32-bit operations per cycle at 720 MHz, and the video interface supports several standard formats for interoperating with imaging front ends. The 1000 Mbps Ethernet subsystem can support segmented-network data movement when the system architecture permits it. Because this is a safety- and compliance-sensitive use case, engineers must independently validate electrical safety, software risk controls, thermal margins, and the exact qualification requirements of the selected ordering code.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für TMS320DM647ZUT7 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | TMS320DM647ZUTA8 | TMS320DM647CUT7 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 529-FCBGA (19x19) | 529-FCBGA (19x19) | 529-FCBGA (19x19) |
| Processor Family | TMS320DM647 | TMS320DM647 | TMS320DM647 |
| Instruction Set | 32-bit fixed-point | 32-bit fixed-point | 32-bit fixed-point |
| Maximum Clock Frequency | 720 MHz | 720 MHz | 720 MHz |
| Peak Processing Performance | 5760 MIPS | 5760 MIPS | 5760 MIPS |
| C64x+ Instructions per Cycle | 8 instructions/cycle | 8 instructions/cycle | 8 instructions/cycle |
| Ethernet Speed | 1000 Mbps | 1000 Mbps | 1000 Mbps |
| SGMII Port Count | 1 port | 1 port | 1 port |
| Video Interface | 4-bit video port | 4-bit video port | 4-bit video port |
Wichtigste Unterscheidungsmerkmale
- High parallel fixed-point throughput (vs. TMS320DM647CUT7)
- Integrated multimedia and network connectivity (vs. TMS320DM647ZUTA8)
- Software continuity within the C64x+ family (vs. TMS320DM647ZUTA8)
Designhinweise
Treat the 529-FCBGA land pattern and escape routing as a first-class layout constraint. Use the manufacturer package drawing for ball locations, solder-mask and paste apertures, via recommendations, and assembly clearances. A multilayer board is generally required to route memory and high-speed peripherals while preserving controlled impedance. Validate the complete stack-up with the external memory and network devices because processor-only simulation does not cover package and board parasitics.
Implement the complete core and I/O supply plan from the manufacturer power-supply requirements, including sequencing, voltage tolerances, decoupling, and current margin. The processor operates from a 1.2 V core rail, so supply impedance and transient response directly affect execution reliability. Place high-frequency decoupling close to the relevant power and ground balls, provide bulk energy near the device, and confirm steady and transient current requirements against the clock, memory, SGMII, video, and external-interface loading.
Budget clock jitter, skew, and return-path continuity before prioritizing processor clock frequency. Use the VCXO interpolated control capability and associated external network exactly as specified, and keep the clock distribution symmetrical where the reference design permits. External-memory and SGMII interfaces also require controlled-impedance routing without stubs or unnecessary test pads. Signal-integrity simulations should use the actual stack-up, connector and package models, and worst-case loading conditions.
Evaluate junction temperature using worst-case ambient temperature, clock activity, I/O loading, external memory activity, and board heat spreading. The 529-FCBGA exposes many signal and power connections, so a design that works on a development board may perform differently after enclosure construction and nearby component heating are added. Use the manufacturer thermal information for the exact package and provide copper area, via arrays, and airflow appropriate to the final assembly. Avoid presenting board-only temperature rise as a complete junction-temperature result.
Do not infer drop-in compatibility from the processor family or package alone. Confirm the ordering suffix, temperature grade, qualification designation, pin/ball behavior, errata status, and supported software configuration before releasing a substitute. The TMS320DM648 has a similar large package but a different SGMII-port count, so it is not automatically interchangeable. Perform boot, memory, video, network, and thermal regression tests on the exact alternate device used for production.
Compliance-Informationen
No specific RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification declaration was identified for the exact ordering code. AEC-Q100 is not applicable to this commercial digital media processor ordering option.