TUSB2140PAG - 4-Port USB Hub with Embedded Function | Texas Instruments
Teilenummer: TUSB2140PAG ✗ AbgekündigtTUSB2140PAG Übersicht
A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream ports. The broader hierarchy is USB interface IC, then interface IC, integrated circuit, and semiconductor. Within that hierarchy, the TUSB2140PAG adds an embedded function to the conventional hub role, allowing a compact design to manage USB topology while supporting additional device-specific behavior. This makes the device relevant to USB expansion, embedded control, peripheral aggregation, and legacy USB system designs.
Key characteristics include four downstream ports, a 12 Mbps interface, operation with a maximum 3.6 V supply, and support for a 48 MHz maximum clock frequency. The 64-terminal surface-mount package provides the electrical connections required for the upstream interface, downstream ports, power-management signals, clocking, configuration, and embedded-function implementation. Exact pin names, electrical limits, and recommended capacitor values should be confirmed against the manufacturer datasheet before schematic capture or PCB release.
Technically, the TUSB2140 belongs to the family of Texas Instruments bus controllers and USB interface integrated circuits. A centralized hub can reduce the number of host USB ports required from an embedded processor or host controller while allowing several peripherals to share one upstream connection. The 48 MHz clock specification defines the device's maximum operating clock, whereas the 3.6 V maximum supply establishes the upper boundary for system-level power design. Designers must also account for USB data-routing topology, termination, decoupling, enumeration behavior, and downstream-port power requirements.
Typical applications include industrial USB-to-USB expansion, embedded USB test equipment, peripheral aggregation, legacy computer and communications equipment, and controlled embedded systems requiring more downstream USB connections. The embedded-function architecture may simplify boards that previously required a hub controller plus a separate companion controller, but the exact supported functions and firmware interface must be confirmed for each product design.
A key design consideration is to validate signal routing and power sequencing against the complete datasheet before fabrication. Maintain short, continuous USB data paths, provide local high-frequency bypass capacitance at the supply pins, and keep return paths beneath the relevant signals. Do not assume that every device with the same 12 Mbps USB classification is a drop-in replacement; package, pinout, embedded-function behavior, and host compatibility must all match.
This product page consolidates verified product identity, package information, lifecycle guidance, substitution limits, comparison fields, and practical USB interface design considerations. It is intended to help engineers identify whether the TUSB2140PAG fits an existing USB hub architecture and which technical checks are required before committing a board revision to production.
Drop-in-Alternativen für TUSB2140PAG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit TUSB2140PAG (gleiche Bauform und Footprint) – abweichend in Package, Product Type, Serial EEPROM Interface, Supply Voltage.
TUSB2046BVFR
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →TUSB2040APT
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →TUSB2140PAG Technische Daten
| Product Type | 4-port USB hub controller with embedded function |
| Number of USB Ports | 4 ports |
| USB Interface Speed | 12 Mbps |
| Maximale Taktfrequenz | 48 MHz |
| Maximum Supply Voltage | 3.6 V |
| Temperature Grade | Industrial |
| Gehäuse | 64-terminal TQFP |
| Terminal Count | 64 terminals |
| Montageart | Surface mount |
| Embedded Function | Yes |
TUSB2140PAG 64-terminal tqfp Pinbelegungsleitfaden
Pinbelegung für TUSB2140PAG (64-terminal tqfp-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für TUSB2140PAG.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
TUSB2140PAG ist geeignet für 6 Anwendungs: Industrial USB Port Expansion, Embedded Peripheral Aggregation, Legacy USB Test Equipment, USB Communications Equipment, USB Audio and Human Interface Devices, Data Acquisition and Control Systems.
Industrial USB Port Expansion
The TUSB2140PAG fits industrial USB expansion designs that need one upstream host connection to support four downstream peripherals. Its 4-port hub architecture, 12 Mbps USB interface, industrial temperature grade, and 64-terminal TQFP package make it appropriate for compact embedded equipment requiring managed USB connectivity. The controller can simplify host-port allocation while keeping the implementation within a low-voltage 3.6 V maximum supply environment. Designers should preserve short USB data routes, provide local supply bypass capacitance, and validate enumeration with every peripheral intended for the finished system.
Empfohlen
Embedded Peripheral Aggregation
The TUSB2140PAG is suitable for embedded peripheral aggregation when a system must connect several USB devices to a single host controller. Its four hub ports provide a defined downstream topology, while the embedded function can consolidate behavior that would otherwise require additional controller logic. The 12 Mbps interface and 48 MHz maximum clock frequency should be checked against the host software and peripheral transfer requirements. Keep USB differential pairs impedance controlled and route returns continuously to reduce susceptibility to common-mode noise in industrial enclosures.
Empfohlen
Legacy USB Test Equipment
The TUSB2140PAG can support legacy USB test equipment that requires several 12 Mbps peripheral connections around a central host interface. The four-port configuration reduces the need for multiple external USB transceivers or hub blocks, and the industrial-grade component designation suits equipment intended for controlled operating environments. Its 64-terminal TQFP footprint requires careful fanout and adequate thermal spreading. Validate suspend, resume, enumeration, hot-plug behavior, and cable compatibility because those functions are not characterized by port count alone.
Empfohlen
USB Communications Equipment
The TUSB2140PAG fits USB communications equipment that combines a host-facing interface with multiple peripheral-facing connections. Its 4-port hub function and embedded function provide a compact implementation path for gateways, data-acquisition units, and service interfaces operating at 12 Mbps. The 3.6 V maximum supply supports integration into low-voltage embedded platforms, while the 48 MHz maximum clock establishes the controller timing ceiling. Use short connector launches, controlled impedance, and ground stitching around USB data pairs, and test all peripheral combinations under the intended noise and temperature conditions.
Empfohlen
USB Audio and Human Interface Devices
The TUSB2140PAG can serve as the USB connectivity element in systems combining human-interface, control, and auxiliary peripherals. Four downstream ports allow a keyboard, pointing device, service interface, or other 12 Mbps USB device to share one upstream host connection. The embedded-function aspect may reduce external control logic, but exact supported functions require confirmation in the manufacturer documentation. Keep the hub close to the connector field, use solid ground-plane continuity, and verify enumeration timing and device power states during interoperability testing.
Empfohlen
Data Acquisition and Control Systems
The TUSB2140PAG is applicable to data-acquisition and control systems that need to connect multiple low-speed USB peripherals to one embedded processor or industrial controller. Four managed downstream ports can organize measurement adapters, calibration interfaces, and service connections, while the embedded function can reduce board-level controller overhead. Its industrial temperature grade and 3.6 V maximum supply are useful constraints for embedded equipment, provided the complete operating-temperature and electrical limits are met. Validate sustained bus activity, power-cycle behavior, grounding, and peripheral isolation in the final enclosure.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für TUSB2140PAG – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | TUSB2046B | TUSB2040APT |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-TQFP | 64-TQFP | 64-TQFP |
| Mounting Type | Surface mount | Surface mount | Surface mount |
Wichtigste Unterscheidungsmerkmale
- Documented replacement path simplifies legacy product transitions (vs. TUSB2046B)
- Integrated hub and embedded-function functionality (vs. TUSB2040APT)
- Documented low-voltage and clock constraints (vs. TUSB2046B)
Designhinweise
Route USB differential pairs as impedance-controlled, tightly coupled traces with a continuous reference plane. Minimize stubs, vias, and branch lengths between the TUSB2140PAG and USB connectors. Keep connector launches and controller connections away from switching nodes and high-current return paths, and use ground stitching near connector entries to limit ESD and common-mode noise coupling.
Provide local high-frequency bypass capacitance at the supply and ground terminals and route it through short, low-inductance paths. The manufacturer's maximum supply voltage is 3.6 V, so leave margin for supply tolerance and transient excursions. Confirm the complete operating-voltage range and downstream-port power requirements in the datasheet before selecting regulators, protection devices, or bulk capacitance.
Do not substitute a USB hub solely because it has four ports or a 64-terminal package. Compare the exact pinout, clock source, supply sequencing, USB data-routing requirements, embedded-function behavior, and host enumeration procedure. The TUSB2046B is the documented replacement candidate, but board-level changes may still be required if application-specific connections or firmware assumptions differ.
Use the exposed package area and surrounding copper as a thermal path, while following the manufacturer's land-pattern guidance. At 48 MHz maximum clock and 3.6 V maximum supply, switching losses are generally modest, but board temperature, airflow, and adjacent heat sources still affect junction conditions. Verify the assembled design across its intended environmental range rather than relying only on the industrial temperature grade.
Compliance-Informationen
No explicit compliance statements were found in the available product records. The industrial temperature grade describes environmental class and does not by itself establish AEC-Q100 qualification, RoHS compliance, REACH compliance, or lead-free status.