USB2512AI-AEZG-TR 2-Port USB 2.0 Hub Controller | Microchip
Teilenummer: USB2512AI-AEZG-TR ✓ AktivUSB2512AI-AEZG-TR Übersicht
A USB hub controller is an interface integrated circuit that manages traffic between an upstream USB host and one or more downstream USB devices. It belongs to the USB interface controller hierarchy, where hub control adds device enumeration, connection management, and shared bus access. The USB2512AI family combines low-speed, full-speed, and high-speed device support according to its product classification, making it useful for mixed-speed peripherals in personal computers, embedded systems, and consumer electronics.
The primary engineering features of the USB2512AI-AEZG-TR include its two-port USB 2.0 hub architecture, 3.3 V operation, 36-QFN surface-mount package, and exposed-pad thermal construction. Its compact footprint supports high-density desktop, docking, and embedded designs. The tape-and-reel ordering suffix identifies the intended manufacturing format, while the base device combines low-power USB connectivity with a centralized hub function. Additional electrical limits, current ratings, operating-temperature limits, and supported speed-mode details must be confirmed from the manufacturer datasheet before release to production.
Microchip positions the USB2512 family around efficient USB hub implementation in mixed-speed environments. The controller handles the physical USB signaling and hub-facing logic required for multiple downstream connections, allowing the upstream host to communicate through a single USB port. Its exposed pad supports heat transfer from the device into the PCB copper, making careful land-pattern implementation and thermal via placement important in space-constrained or high-activity USB configurations.
Typical uses include two-port USB expansion in desktop computers, notebook docks, printers, storage accessories, industrial human-machine-interface panels, and embedded systems that attach keyboards, mice, flash-memory readers, or other USB peripherals. The two-port architecture is especially useful where the host interface count is fixed but peripheral attachment needs exceed the number of available root ports. Configuration details, such as port enable, indicator, and non-power-mode behavior, should be established from the device pin descriptions and reference implementation.
The principal layout concern is keeping high-speed USB routing short, controlled, and away from noisy sources. Place input and output decoupling capacitors close to their associated supply pins, provide a continuous ground reference under the exposed pad, and follow the manufacturer’s recommended footprint and via arrangement. Because the package combines a fine-pitch lead pattern with a thermal pad, assembly stencil design and solder-paste volume also need validation against the recommended land pattern.
This product page organizes the controller’s exact package, sourcing information, pin-access needs, same-family alternatives, and practical implementation guidance into one engineering reference. It also distinguishes documented facts from parameters that require confirmation in the manufacturer datasheet, helping designers move from component selection to PCB implementation without relying on generic USB hub guidance.
Drop-in-Alternativen für USB2512AI-AEZG-TR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit USB2512AI-AEZG-TR (gleiche Bauform und Footprint) – abweichend in Product Type, Maximum USB Data Rate, Number of Downstream Ports, Package, Package Type.
USB2512BI-AEZG-TR
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →USB2512B-AEZG-TR
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →USB2512AI-AEZG
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →USB2512AI-AEZG-TR
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →USB2513B-AEZ-TR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
USB2512AI-AEZG-TR Technische Daten
| Product Type | USB 2.0 high-speed hub controller |
| Downstream Port Count | 2 ports |
| USB Specification | USB 2.0 |
| Operating Supply | 3.3 V |
| Package Type | 36-pin QFN with exposed pad |
| Package Dimensions | 6 x 6 mm |
| Package Height | 0.9 mm |
| Montagestil | Surface mount |
| Interface Classification | USB interface controller |
| Controller Classification | USB hub controller |
| Maximum USB Data Rate | 480 Mb/s for USB 2.0 high-speed operation |
| Ordering Format | Tape and reel |
USB2512AI-AEZG-TR 0.9 mm Pinbelegungsleitfaden
Pinbelegung für USB2512AI-AEZG-TR (0.9 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für USB2512AI-AEZG-TR.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
USB2512AI-AEZG-TR ist geeignet für 6 Anwendungs: Desktop USB Expansion, Notebook Docking Station, Industrial Human-Machine Interface, Printer and Storage Accessory, Embedded USB Peripheral Hub, Consumer USB Accessory Hub.
Desktop USB Expansion
The USB2512AI-AEZG-TR fits desktop systems that need two downstream USB connections while exposing only one upstream port to the host controller. According to the Microchip manufacturer documentation, the USB2512AI family is designed for efficient USB hub operation in mixed-speed environments. Placing the controller near an external USB connector can shorten protected data routes and simplify peripheral enumeration. Designers should allocate the upstream and downstream port budget, verify supported speed modes, and confirm per-port power requirements from the device electrical tables before releasing the board layout.
Empfohlen
Notebook Docking Station
The USB2512AI-AEZG-TR is appropriate for compact notebook docks that need to consolidate several low- and full-speed accessories behind one upstream USB connection. Its two-port USB 2.0 hub architecture and 3.3 V supply suit density-conscious consumer and mobile equipment. According to Microchip’s product classification, the controller supports mixed-speed USB environments. A practical implementation places protected upstream and downstream routes near their connectors, places the exposed-pad land over a continuous ground region, and validates the hub’s startup behavior and power budget against the final dock accessory load.
Empfohlen
Industrial Human-Machine Interface
The USB2512AI-AEZG-TR can support an industrial human-machine interface that connects input devices such as keyboards, touch controllers, or barcode readers through a centralized USB hub. According to the Microchip manufacturer documentation, the controller’s mixed-speed USB support is suitable for hubs serving peripherals with different transfer capabilities. For industrial equipment, the design should preserve short USB traces, include applicable surge and ESD protection, and verify the controller’s temperature and lifecycle ratings. The final enclosure, cable length, and grounding environment can materially affect signal and ESD performance.
Empfohlen
Printer and Storage Accessory
The USB2512AI-AEZG-TR is useful in printers and storage accessories that expose multiple USB connections through one internal host port. According to the Microchip manufacturer product page, the USB2512 family is built for cost-effective and power-efficient USB 2.0 hub control. The controller can centralize enumeration and connection management while keeping the upstream interface limited to one port. Designers should use the recommended bypass-capacitor arrangement, maintain continuous return paths beneath the exposed pad, and confirm whether downstream-port power switching is required for the attached storage load.
Empfohlen
Embedded USB Peripheral Hub
The USB2512AI-AEZG-TR supports embedded systems that need to connect flash-memory readers, keypads, and other USB peripherals through one upstream interface. According to the Microchip manufacturer documentation, the device is classified as a high-speed USB 2.0 hub controller supporting mixed-speed environments. In a compact embedded PCB, the 36-QFN footprint saves area, but its fine-pitch leads and exposed pad require careful assembly planning. Keep high-speed routes short and over an uninterrupted ground plane, place decoupling components directly at the supply pins, and verify the exposed-pad paste pattern during fabrication qualification.
Empfohlen
Consumer USB Accessory Hub
The USB2512AI-AEZG-TR fits compact consumer accessories that need two USB connections from one internal host port. According to the Microchip manufacturer classification, it is a 2-port USB 2.0 high-speed hub controller operating at 3.3 V. The small 6 x 6 mm QFN allows placement near an enclosure edge or connector cluster, although connector mechanics and enclosure grounding must be considered. Production designs should validate downstream current sharing, thermal behavior of the exposed pad, USB trace geometry, and assembly yield with the selected lead-free or other manufacturing process.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für USB2512AI-AEZG-TR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | USB2512BI-AEZG-TR | USB2512B-AEZG-TR | USB2512AI-AEZG | USB2513B-AEZ-TR |
|---|---|---|---|---|---|
| Package | 36-QFN (6 x 6 mm) with exposed pad | 36-QFN (6 x 6 mm) with exposed pad | 36-QFN (6 x 6 mm) with exposed pad | 36-QFN (6 x 6 mm) with exposed pad | 36-QFN (6 x 6 mm) with exposed pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| USB Specification | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Device Family | USB2512AI | USB2512B | USB2512B | USB2512AI | USB2513B |
| Mounting Style | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Wichtigste Unterscheidungsmerkmale
- Direct match to the USB2512AI device family (vs. USB2512BI-AEZG-TR)
- Two-port hub consolidation in a compact package (vs. USB2513B-AEZ-TR)
- Manufacturing format aligned with the exact ordering code (vs. USB2512AI-AEZG)
Designhinweise
Route upstream and downstream USB data paths as short, matched traces over a continuous ground plane, and avoid placing the hub controller beneath switching regulators, clock sources, or other high-current edges. Keep the controller close to the relevant connector and protection circuitry so that ESD-current paths do not cross sensitive data routes. Differential impedance, trace spacing, and via geometry should follow the PCB stack-up and the manufacturer’s USB layout guidance.
Implement the 36-QFN exposed pad using the manufacturer’s recommended land pattern, with a continuous ground connection and a solder-paste stencil suited to the pad area. A normal one-to-one paste aperture can produce excessive solder; a reduced window or divided pattern may improve assembly consistency. Validate the stencil, pad voids, thermal-via arrangement, and reflow profile on representative boards before scaling production.
Place all required bypass capacitors close to their corresponding 3.3 V supply pins and connect them to a low-impedance ground reference. The hub’s downstream power budget must be derived from the device’s documented per-port current capability and the selected USB powering method; do not assume that every attached load can operate simultaneously at the full USB 2.0 current allowance. Include correct upstream VBUS and downstream power-path components in the system budget.
Do not treat a shared QFN-36 package as proof that a USB hub controller is a drop-in replacement. Pin assignments, USB data-routing requirements, regulator connections, configuration straps, firmware expectations, and electrical limits may differ across USB2512AI, USB2512B, and USB2513B variants. Before substitution, compare the manufacturer pin tables and reference circuits, then perform signal-integrity, power, enumeration, and thermal validation on the revised board.
Compliance-Informationen
The manufacturer product and distributor summaries do not explicitly state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact ordering code before procurement or regulatory release.