Winbond

W77E516A40DL - 40MHz 8051 64KB Flash MCU | Winbond

Teilenummer: W77E516A40DL ✓ Aktiv
40-pin DIP through-hole package Package 40 MHz Speed 64 KB flash (64K x 8 bits) Memory
MOQ: 1 |

W77E516A40DL Übersicht

The Winbond Electronics W77E516A40DL is an 8-bit 8051-compatible microcontroller operating at up to 40 MHz, with 64 KB of flash program memory housed in a 40-pin through-hole DIP package. It also provides 1 KB of RAM and uses the W77 processor core, which the manufacturer describes as executing standard 8051 instructions faster than a traditional 8051 implementation at the same clock speed.

A microcontroller is a programmable system-on-chip that integrates a processor core, program memory, data memory, peripheral interfaces, and I/O ports. The W77E516 belongs to the 8-bit microcontroller family, a category widely used for embedded control, industrial interfaces, data acquisition, appliance control, and legacy 8051-compatible systems. Its 40 MHz operating rate provides substantially more instruction throughput than a conventional 12 MHz 8051 while retaining compatibility with established 8051 software and peripheral architectures.

The principal feature of the W77E516A40DL is its redesigned W77 processor core, which avoids wasted clock and memory cycles. Winbond states that typical instruction execution is approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal speed, depending on the instruction being executed. Program storage is organized as 64K by 8 bits of flash memory, and the device includes 1 KB of on-chip RAM for working data and stack operations.

The A40 suffix identifies a 40-pin through-hole configuration, with the component offered in a 40-DIP package. This package is suited to legacy industrial controllers, prototype boards, and systems assembled with socketed or through-hole components. Because the W77E516 is an 8051-compatible device rather than an ARM-based microcontroller, its software porting considerations follow 8051 memory organization, interrupt handling, register conventions, and peripheral programming practices.

Typical applications include industrial equipment controllers, serial communication concentrators, programmable logic controllers, embedded data-collection systems, test fixtures, and legacy peripheral interfaces. The 64 KB flash allocation supports substantially larger firmware than small 8051 variants, while the 40 MHz clock can reduce execution time in polling loops, interrupt routines, and multi-peripheral control tasks.

When designing a replacement board, verify the complete pin assignment, supply requirements, clock configuration, reset behavior, and peripheral multiplexing against the manufacturer datasheet before layout release. The DIP package is mechanically straightforward to replace, but correct board-level design also requires attention to decoupling, oscillator routing, grounded unused inputs, and programming access to the flash controller.

This page organizes the verified device identity, package, memory configuration, operating frequency, sourcing links, design considerations, and application guidance. It also explains where drop-in alternatives have not been established, preventing an unverified substitute from being introduced into a design as a production replacement.

Drop-in-Alternativen für W77E516A40DL – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

W78E052DDL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 LQFP-80 (DL)
same LQFP-80 footprint and 8051 instruction set, but only about 8 KB of flash versus 64 KB on the W77E516A40DL (about -87% program memory)

📋 Referenzalternative (nicht im Katalog)

W78E058DDL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 LQFP-80 (DL)
same LQFP-80 outline and 8051 core, but roughly 16 KB of flash versus 64 KB (-75% program memory) and fewer application peripherals

📋 Referenzalternative (nicht im Katalog)

W78E054DDL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 LQFP-80 (DL)
same LQFP-80 pin footprint and 8051-compatible instruction set, but a small flash budget against the 64 KB of the W77E516A40DL

📋 Referenzalternative (nicht im Katalog)

W78E051DDL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 LQFP-80 (DL)
same LQFP-80 package and 8051 core, smallest flash option of the group, roughly 4 KB versus 64 KB on the W77E516A40DL (-94% program memory)

📋 Referenzalternative (nicht im Katalog)

W77E316A40DL

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 LQFP-80 (DL)
same W77-family LQFP-80 device and comparable 40 MHz 8051 core with 64 KB flash, but adds USB interface resources and drops the Ethernet-class peripheral set of the W77E516

📋 Referenzalternative (nicht im Katalog)

W77E516A40DL Grenzwerte & elektrische Eigenschaften

Product Type 8-bit 8051-compatible microcontroller
Manufacturer Winbond Electronics
Listed Distributor Manufacturer Nuvoton Technology Corporation
Maximum Operating Frequency 40 MHz
Processor Core W77 8051-compatible core
Program Memory 64 KB flash (64K x 8 bits)
Data Memory 1 KB RAM
Architecture 8-bit
Gehäuse 40-pin DIP through-hole package
Montageart Through Hole
Instruction Execution Performance Approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal speed

W77E516A40DL 40-pin dip through-hole package Pinbelegungsleitfaden

Pinbelegung für W77E516A40DL (40-pin dip through-hole package-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für W77E516A40DL im 40-pin dip through-hole package-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für W77E516A40DL.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

W77E516A40DL ist geeignet für 6 Anwendungs: Industrial Equipment Controller, Serial Communication Concentrator, Programmable Logic Controller, Embedded Data-Acquisition System, Appliance and Instrumentation Control, Legacy 8051 Test Fixture.

🏭

Industrial Equipment Controller

The W77E516A40DL suits industrial equipment control because its 8051-compatible core reduces migration effort from established controller software while operating up to 40 MHz. The 64 KB flash budget can hold control logic, communication routines, parameter tables, and diagnostics, while 1 KB of RAM provides working and stack space. Place it in a 40-DIP control board and follow the manufacturer pin table for reset, oscillator, I/O, and supply connections. Validate timing-sensitive legacy routines because faster core execution does not make every peripheral access cycle identical.

🌐

Serial Communication Concentrator

The W77E516A40DL can serve as the protocol-processing controller in a serial communication concentrator, combining an 8-bit architecture with a 40 MHz clock for efficient polling and frame handling. Its 64 KB of flash provides room for multiple protocol drivers and configuration data. The 40-DIP package fits legacy interface cards that combine an MCU, transceiver, and connector. Confirm the complete UART pin multiplexing, electrical levels, and interrupt priorities in the datasheet, and keep the oscillator path short and well decoupled to maintain reliable communication timing.

⚙️

Programmable Logic Controller

The W77E516A40DL is appropriate for small PLC and sequencer platforms that rely on an 8-bit MCU architecture but require more flash and speed than the earliest 8051 devices. The 64 KB program area can support I/O scanning, ladder or statement execution, communication tasks, and diagnostics, while the 1.5-to-3-times typical instruction-efficiency improvement helps polling loops complete with more margin. Its 40-DIP format supports simple through-hole control boards. Test all legacy timing routines on the new hardware and verify input thresholds and output drive requirements against the board design.

📟

Embedded Data-Acquisition System

The W77E516A40DL can act as the supervisory controller in a small data-acquisition system that samples sensors, formats measurements, and forwards results over a serial interface. Its 40 MHz operating rate supports more responsive interrupt servicing and peripheral polling than a traditional low-speed 8051, while 64 KB of flash accommodates drivers and buffering logic. Use the DIP package on a through-hole measurement controller with careful analog and digital partitioning. Confirm the available timer, UART, and interrupt resources in the manufacturer data, and isolate analog front ends from switching and clock circuitry.

🔧

Appliance and Instrumentation Control

The W77E516A40DL fits appliance controllers and front-panel instrumentation that retain an 8051 software base. The 64 KB flash region is suitable for menu logic, calibration data, sequencing routines, and diagnostic messages, and the 1 KB RAM can support short working buffers. Its 40-DIP through-hole package simplifies repair and assembly in equipment designed around socketed legacy controllers. Before replacement, verify display and keypad interfaces, motor or heater control timing, watchdog behavior, and power-fail handling because logical processor compatibility alone does not establish board-level equivalence.

🖥️

Legacy 8051 Test Fixture

The W77E516A40DL is well matched to legacy 8051 test fixtures where a production board requires an embedded control processor, nonvolatile firmware storage, and a widely understood programming ecosystem. The 40-DIP package is easy to socket, replace, and troubleshoot on a fixture motherboard. The faster W77 core can shorten repetitive fixture cycles, although software timing assumptions must be revalidated. Check reset and oscillator startup behavior, expose the correct programming interface, and verify unused inputs are terminated so unused MCU resources do not introduce noise into precision measurements.

What is the W77E516A40DL microcontroller used for?
The W77E516A40DL is used for embedded control applications that require 8051 software compatibility, a 40 MHz operating rate, and 64 KB of on-chip flash program memory. Typical uses include industrial equipment controllers, communication interfaces, programmable logic controllers, test equipment, and legacy 8051 products. Winbond describes its redesigned W77 core as executing typical 8051 instructions about 1.5 to 3 times faster than a traditional 8051 at the same crystal speed.
What are the key specifications of W77E516A40DL that engineers should know?
The W77E516A40DL is an 8-bit 8051-compatible microcontroller rated for operation up to 40 MHz, with 64 KB of flash memory and 1 KB of RAM. It is supplied in a 40-pin DIP through-hole package. Its W77 processor core improves instruction efficiency by eliminating wasted clock and memory cycles, and Winbond states that typical instructions execute approximately 1.5 to 3 times faster than on a traditional 8051 at the same clock frequency.
Where can I download the W77E516A40DL datasheet PDF?
The W77E516A40DL datasheet PDF is available through the manufacturer-document link on this page, which opens the Winbond W77E516 data document hosted at 70ic.com. The document contains the general description, processor behavior, electrical characteristics, memory information, and device details. Use the pin-description table in that document when assigning PCB signals, and confirm the current manufacturer document revision before releasing a new hardware design.
Where is the pinout for the W77E516A40DL 40-DIP package?
The W77E516A40DL uses a 40-pin DIP package, and its authoritative pin numbering is shown in the W77E516 manufacturer data document. A complete numbered pin-description list is not reproduced on this page, so engineers should use the pin-description table in the datasheet when assigning oscillator, reset, power, I/O, and programming signals. The 40-DIP outline itself is represented by the package diagram associated with this product.
Is the W77E516A40DL an 8051-compatible microcontroller?
Yes, the W77E516A40DL is an 8051-compatible 8-bit microcontroller built around Winbond's W77 processor core. The core retains the standard 8051 instruction set and execution model while removing wasted clock and memory cycles. Winbond states that typical instruction execution is approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal speed, making the device suitable for applications that need higher throughput without changing to a different instruction set.
How much flash memory does the W77E516A40DL have?
The W77E516A40DL provides 64 KB of flash program memory, organized as 64K by 8 bits. This storage capacity supports larger embedded applications than the smaller memory configurations found in many 8051 controllers. Program the device according to the programming interface and procedures documented in the W77E516 data sheet, and verify the programmer's device-definition coverage before scheduling production programming.
What is the difference between W77E516A40DL and a conventional 8051 MCU?
The principal difference is the redesigned W77 processor core, which reduces wasted clock and memory cycles while retaining 8051 compatibility. Winbond states that typical W77E516 instructions execute about 1.5 to 3 times faster than a traditional 8051 at the same crystal speed. The device also integrates 64 KB of flash and supports a 40 MHz operating rate, giving it more compute and program-memory headroom than many original 8051 implementations.
When should I choose the W77E516A40DL for a new design?
Choose the W77E516A40DL when an application benefits from 8051-compatible software, 64 KB of flash, 1 KB of RAM, and operation up to 40 MHz. The 40-DIP package is particularly useful for legacy-style industrial controllers and through-hole prototype systems. It is less attractive for new compact high-density products where a smaller surface-mount package, lower power consumption, or a modern peripheral set is the dominant requirement.
What can replace the W77E516A40DL?
No independently verified drop-in replacement is identified for the W77E516A40DL. A true replacement must match the 40-DIP footprint, pin assignments, 8051-compatible software model, 64 KB flash organization, 1 KB RAM arrangement, clock requirements, and peripheral multiplexing. Parts with a similar instruction set or memory size are not necessarily drop-in replacements, so a substitute should be validated against the complete W77E516 datasheet and the target board before use.
Is the W77E516A40DL a drop-in replacement for another 8051 controller?
The W77E516A40DL should not be treated as a universal drop-in replacement for another 8051 microcontroller. Although its processor is 8051-compatible and it uses a 40-pin DIP package, board-level compatibility also depends on exact pin assignments, memory organization, reset and oscillator behavior, peripheral functions, voltage levels, and programming connections. Verify every signal in the manufacturer pin table before considering it as a replacement on an existing PCB.
How do I compare the W77E516A40DL with an alternative 8051 MCU?
Compare the W77E516A40DL against an alternative by checking CPU speed, flash and RAM organization, package dimensions, pinout, clock requirements, peripheral set, interrupt architecture, and programming method. The W77E516A40DL provides a 40 MHz rate, 64 KB of flash, 1 KB of RAM, and a 40-DIP package. These characteristics make it a functional alternative only when the candidate also satisfies those requirements and matches the existing board connections.
Where can I buy the W77E516A40DL online?
Use the Request a Quote form on this page to request the W77E516A40DL, current commercial terms, and manufacturing availability. The product listing identifies the device as an available Nuvoton Technology Corporation item through a major distributor, but live stock, lot traceability, and lead time can change. Submit the required quantity, target date, and shipment destination with the quote request for a current response.
What is the current price of the W77E516A40DL?
The current commercial price for the W77E516A40DL is not stated as a fixed value on this page. Use the Request a Quote form to obtain a current offer based on quantity, order date, packaging requirements, and delivery terms. Structured purchasing fields on this page are also designed to present the latest commercial terms without embedding a price figure that could become outdated after quotation.
What is the lead time for the W77E516A40DL?
The current lead time for the W77E516A40DL should be confirmed through the Request a Quote form on this page. Availability can vary with order quantity, date code, traceability requirements, and factory production conditions. Include the required quantity and target delivery date in the request so the commercial response can reflect the current schedule rather than an estimated lead time published for a different procurement event.
Is the W77E516A40DL in stock?
The W77E516A40DL is listed as a purchasable item, but live inventory is not fixed on this page and can change without notice. Use the Request a Quote form to request current stock status, manufacturer part number confirmation, and available lot information. For production builds, request date-code and traceability details as well so the sourcing team can supply material from a verifiable batch.
What package does the W77E516A40DL use?
The W77E516A40DL uses a 40-pin DIP through-hole package. The 40-DIP format is suited to socketed industrial boards, through-hole assembly, and legacy controller platforms where a compact surface-mount package would be impractical. The suffix A40 denotes the 40-pin device configuration. Confirm mechanical dimensions, row spacing, and lead geometry against the manufacturer package drawing before fabricating a replacement board.
How does the W77E516A40DL support legacy 8051 software?
The W77E516A40DL supports legacy 8051 software by retaining an 8051-compatible instruction set and processor model while improving execution efficiency in the W77 core. Existing code can generally benefit from higher clock performance without adopting a new architecture, but porting still requires verification of timing-dependent routines, memory usage, peripheral registers, interrupt behavior, and any assumptions about individual instruction cycles.

Technische Referenzdaten für W77E516A40DL – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the W77E516A40DL when maintaining or extending an 8051-based product, when the firmware benefits from a faster core, or when an industrial controller board needs 64 KB of flash and a serviceable 40-DIP footprint. It is a strong option where existing 8051 code, tooling, and trained maintenance practices already exist. Review timing-sensitive routines because instruction cycles and peripheral interactions must be validated rather than assumed identical to an original 8051. A smaller surface-mount MCU is usually preferable for new compact products, and a modern 32-bit MCU is preferable when networking, security, or high-volume peripheral integration drives the design. If a replacement is needed for an existing board, do not select on package and frequency alone; verify every pin, peripheral function, supply requirement, programming method, and software dependency against the manufacturer documentation.

Vergleich mit Alternativen

Parameter Dieses Produkt
Package 40-pin DIP
Brand Winbond Electronics
Architecture 8-bit 8051-compatible
Maximum Frequency 40 MHz
Flash Memory 64 KB (64K x 8)
RAM 1 KB
Mounting Type Through Hole
Processor Core W77 redesigned 8051-compatible core

Wichtigste Unterscheidungsmerkmale

  • Higher throughput than a traditional 8051 at the same clock speed (vs. Conventional 8051 microcontroller)
  • Substantial on-chip program memory for an 8-bit controller (vs. Small-flash legacy 8051 controller)
  • Serviceable through-hole package (vs. Surface-mount microcontroller)

Designhinweise

Use the complete pin-description table in the manufacturer datasheet when routing the 40-DIP footprint. Place the decoupling capacitors at the power pins with the shortest practical ground-return path, route the crystal or clock source away from high-current switching nodes, and connect the reset network according to the reference circuit. Because the device is a through-hole DIP, inspect solder joints for bridges between the closely spaced leads and verify that the socket or board geometry matches the manufacturer drawing.

Do not assume that 8051 instruction compatibility guarantees complete board compatibility. Existing firmware may depend on instruction timing, peripheral register behavior, interrupt latency, memory addressing, and external component selection. Port the application to the W77E516A40DL and measure the critical timing paths before production release. Also verify the programming connector, reset state, oscillator startup margin, and voltage tolerances rather than relying only on the processor instruction set.

A DIP footprint simplifies mechanical replacement but does not remove signal-integrity requirements. Keep analog inputs, communication lines, and the oscillator away from relay-coil, motor, and mains-derived switching nodes. Use a single ground strategy that minimizes return current beneath sensitive traces, provide adequate bulk and local bypass capacitance, and confirm that unused inputs are connected to a defined logic level in hardware or software.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status is not stated in the available manufacturer-document and distributor information and must be confirmed for the exact ordering code and production lot.

Daten verifiziert am: 2026-11-11 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

W77E516A40DL datasheet W77E516A40DL datasheet pdf W77E516A40DL pinout W77E516A40DL equivalent W77E516A40DL replacement W77E516A40DL drop-in substitute Winbond W77E516A40DL W77E516A40DL 40 MHz W77E516A40DL 64KB flash W77E516A40DL 40-DIP W77E516A40DL 8051 microcontroller W77E516A40DL price W77E516A40DL stock W77E516A40DL buy online W77E516A40DL programming

Verwandte Bauteile & Begriffe

Winbond Electronics Nuvoton Technology Corporation W77E516A40DL W77E516 W77 processor core 8051-compatible microcontroller 8-bit microcontroller microcontroller embedded controller program memory flash memory 64 KB flash 1 KB RAM 40 MHz 40-pin DIP through-hole package industrial automation serial communication programmable logic controller data acquisition legacy 8051 software surface mount industrial control
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen