XC4VLX15-12FFG668C - 13,824-Cell -12 Virtex-4 LX FPGA | AMD
Teilenummer: XC4VLX15-12FFG668C ✓ AktivXC4VLX15-12FFG668C Übersicht
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and a type of integrated circuit. The XC4VLX15 belongs to AMD's Virtex-4 LX FPGA family, where the 15 designation identifies the device density tier and the FFG suffix identifies the 668-pin FCBGA configuration.
The XC4VLX15-12FFG668C provides 13,824 logic cells, 320 I/O, and an advertised 884,736 logic-gate resource count. Its -12 performance grade makes it the fastest listed grade for this device family. The 668-pin FCBGA exposes substantially more signal connections than lower-pin-count packages, allowing systems to connect external memory, high-speed interfaces, clocks, control signals, and external data buses. The 90 nm CMOS process and 1.2 V core voltage place the device within the Virtex-4 generation of Xilinx/AMD FPGAs.
Typical deployments include telecommunications and industrial control equipment, high-throughput data processing, network-interface subsystems, test and measurement systems, embedded signal-processing platforms, and general-purpose accelerator logic. The large I/O count is especially useful where multiple buses and memory interfaces must converge on one programmable device. Applications must also account for the complexity of a 668-pin BGA, including power distribution, decoupling, escape routing, thermal design, and manufacturing inspection requirements.
The principal engineering trade-off is performance versus obsolete-product risk. The -12 grade provides maximum timing margin within Virtex-4 LX designs, but FPGA design completion also depends on toolchain, intellectual-property core, and device-support availability. Use the manufacturer datasheet and package pinout files to confirm ball assignments, power rails, configuration requirements, and board-level constraints before layout release.
This page combines device characteristics, sourcing guidance, drop-in candidate review, comparison data, and practical design notes to support faster engineering evaluation. It also distinguishes exact electrical equivalents from speed-grade, temperature-grade, and package differences that can affect a production redesign.
Drop-in-Alternativen für XC4VLX15-12FFG668C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC4VLX15-12FFG668C (gleiche Bauform und Footprint) – abweichend in Device Type, Package Type, Logic Cells, Speed Grade, Package.
XC4VLX15-10FFG668C
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC4VLX15-11FFG668C
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC4VLX15-12FFG668C Grenzwerte & elektrische Eigenschaften
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cell Count | 13,824 cells |
| Logic Gate Count | 884,736 gates |
| User I/O Count | 320 I/O |
| Performance Grade | -12 |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Gehäuse | 668-pin FCBGA |
| Package Type | FCBGA |
| Pin-Anzahl | 668 pins |
| Montageart | Surface mount |
| Programmable Logic | FPGA |
| Product Family | Virtex-4 LX |
XC4VLX15-12FFG668C fcbga Pinbelegungsleitfaden
Pinbelegung für XC4VLX15-12FFG668C (fcbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC4VLX15-12FFG668C.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC4VLX15-12FFG668C ist geeignet für 6 Anwendungs: Industrial Control and Automation, Network Interface and Packet Processing, Test and Measurement Equipment, High-Speed Data Acquisition, Telecommunications Signal Processing, Embedded Accelerator and Custom Coprocessor.
Industrial Control and Automation
The AMD XC4VLX15-12FFG668C fits industrial controllers that combine sequencing logic with numerous external sensors, actuators, and field-bus interfaces. Its 13,824 logic cells provide capacity for control state machines, diagnostics, motion-command logic, and communication protocols, while 320 user I/O support parallel sensor acquisition and actuator outputs. The -12 speed grade offers additional timing margin when processing sensor streams or coordinating time-critical control events. A board implementation should use the manufacturer power, I/O-standard, and package constraints, then validate timing with the -12 device characteristics. Because the FCBGA has 668 balls, power delivery and escape routing require careful plane segmentation, decoupling, and BGA inspection planning.
Empfohlen
Network Interface and Packet Processing
The XC4VLX15-12FFG668C is appropriate for network-interface logic that must aggregate external packet memory, transceiver signals, clocks, and control traffic. Its 320 user I/O offer substantial connectivity, while 13,824 logic cells can support framing, header processing, queues, status accounting, and test logic. The -12 grade can provide useful margin for demanding synchronous interfaces. Engineers should map each transceiver and memory signal through the manufacturer SelectIO characterization before selecting voltage standards or termination. PCB implementation must preserve signal-integrity characteristics, maintain adequate bypass capacitance for every supply plane, and provide clean reference-clock routing. Final acceptance should include timing analysis for the selected I/O standard and environmental corner conditions.
Empfohlen
Test and Measurement Equipment
The AMD XC4VLX15-12FFG668C can implement programmable logic for acquisition, pattern generation, analysis, and instrument-control functions in test and measurement systems. Its 13,824 logic cells support parallel datapaths and control algorithms, while the 320 I/O provide interfaces to converters, memories, triggers, and synchronization sources. The -12 grade favors timing-sensitive instrumentation requiring predictable margins at elevated clock rates. The design should partition high-speed and sensitive signals, use controlled impedance routing, and keep reference clocks away from switching data wherever practical. Validate the selected bank voltage, drive strength, and termination using the manufacturer I/O tables. The 668-pin FCBGA also requires adequate layer count, via structures, and assembly inspection suitable for a high-pin-count device.
Empfohlen
High-Speed Data Acquisition
The XC4VLX15-12FFG668C can serve as the programmable core of a data-acquisition subsystem that receives parallel or multiplexed samples, performs filtering or buffering, and transfers results to external processors. The 320 I/O support broad sensor and converter connectivity, and the 13,824-cell Virtex-4 LX resource level accommodates channel control, digital filtering, and data tagging. Its -12 speed grade is useful when the acquisition pipeline must close timing at higher clock rates. Designers should establish complete timing constraints, account for I/O timing relative to the 1.2 V core, and use the manufacturer pinout files for every BGA assignment. Power and thermal design should reflect actual switching activity rather than a nominal FPGA power figure alone.
Empfohlen
Telecommunications Signal Processing
The AMD XC4VLX15-12FFG668C is suitable for telecommunications signal-processing modules requiring programmable logic, substantial I/O, and external memory connectivity. Typical functions include channelization, filtering, framing, rate conversion, and interface adaptation. Its -12 speed grade provides the highest listed performance for the Virtex-4 LX 15-density member, while 320 I/O can connect parallel memory and multiple physical-layer devices. The implementation should use manufacturer timing and SelectIO constraints for every interface, preserve clock and data skew margins, and isolate noisy switching paths from sensitive inputs. Thermal analysis must include adjacent components because the FCBGA and its external memory can concentrate heat around the board center. Prototype validation should cover worst-case data patterns and all required clock-frequency corners.
Empfohlen
Embedded Accelerator and Custom Coprocessor
The XC4VLX15-12FFG668C can implement a custom accelerator or coprocessor alongside an application processor, host FPGA, or dedicated memory. Its 13,824 logic cells support parallel datapaths, arbitration, buffering, and protocol adapters, while 320 I/O provide a broad interface to external accelerators and storage. The -12 grade is advantageous when the accelerator must meet aggressive internal clock targets. Partition the design carefully to prevent high-activity logic from creating local thermal or power-density problems, and establish clocking, reset, and data-handoff protocols with the neighboring devices. Use the manufacturer configuration guidance to protect the bitstream during startup. Board release also requires BGA pad and escape-routing review, plane-current assessment, and thermal validation under sustained maximum-throughput workloads.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC4VLX15-12FFG668C – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC4VLX15-10FFG668C | XC4VLX15-11FFG668C |
|---|---|---|---|
| Package | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA |
| Brand | AMD | AMD | AMD |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells |
| User I/O | 320 I/O | 320 I/O | 320 I/O |
| Speed Grade | -12 | -10 | -11 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| Device Configuration | Field-programmable gate array | Field-programmable gate array | Field-programmable gate array |
Wichtigste Unterscheidungsmerkmale
- Highest listed speed grade in the matched Virtex-4 LX 15-density options (vs. XC4VLX15-11FFG668C)
- Additional timing margin compared with the -10 alternative (vs. XC4VLX15-10FFG668C)
- Same-density package reuse avoids a PCB footprint change (vs. XC4VLX15-10FFG668C)
Designhinweise
Create the power tree from the manufacturer core, auxiliary, and I/O supply requirements rather than assuming every bank can share one rail. Use the -12 device power tables for static and dynamic estimates, then apply actual switching activity and external load assumptions. Place high-frequency decoupling close to the supply and ground balls, preserve plane continuity beneath the device, and verify the design with voltage-drop, plane-current, and worst-case supply-noise analysis.
Estimated: use the manufacturer power estimate for the selected activity, temperature, voltage, and speed grade, multiply it by the package thermal resistance, and add the temperature rise caused by PCB copper and adjacent components. Confirm the resulting junction temperature against the device limit. A 668-pin FCBGA can concentrate heat near the package center, so thermal vias, balanced copper distribution, airflow, or board-level cooling may be necessary despite the absence of a conventional exposed heat pad.
Use the AMD Virtex-4 package-device pinout file as the board-layout authority. Confirm every BGA ball, including power, ground, configuration, and reserved connections. Plan escape routing and layer transitions before placing external components, because 668 balls require deliberate fanout, via-in-pad or dog-bone structures, and inspection access. Follow the manufacturer's PCB and assembly guidelines for solder mask, paste, underfill, and X-ray inspection requirements.
Assign each I/O bank only after checking its permitted voltage standards, drive strength, slew behavior, and timing limits in the manufacturer documentation. Match trace impedance to the selected interface, provide the specified termination, and route clocks as controlled-impedance nets with minimal stubs. Treat configuration pins, reference voltages, and sensitive receive paths separately from high-current outputs to reduce crosstalk and timing risk.
Compliance-Informationen
The exact C-grade suffix appears in the part number, but no explicit environmental, finish, or automotive qualification statement was identified. The -12 grade indicates speed, not automotive qualification.