XC4VLX60-11FF668C - 59,904-Cell -11 Virtex-4 LX FPGA | AMD
Teilenummer: XC4VLX60-11FF668C ✓ AktivXC4VLX60-11FF668C Übersicht
A field-programmable gate array is a programmable digital semiconductor whose configuration memory defines interconnect paths and logic behavior after manufacture. The Virtex-4 LX FPGA belongs to the broader FPGA hierarchy, combining configurable logic blocks, programmable routing, block RAM, dedicated arithmetic resources, input/output blocks, and clock-management circuitry. This makes the device suitable when a design must support parallel signal processing, protocol bridging, programmable control, or high-density digital logic.
The XC4VLX60-11FF668C provides 59,904 logic cells, 6,656 logic blocks, 448 I/O, and an internal clock figure of 1,028 MHz. Its 668-pin FCBGA package supports the substantial pin and power requirements of the device. The commercial C grade is specified for 0°C to 85°C operation, while the 90 nm CMOS process and 1.2 V core supply identify this part as a high-density FPGA from the Virtex-4 generation.
Its architecture allows multiple digital functions to be implemented in parallel rather than executed sequentially by a general-purpose processor. Dedicated block RAM supports data buffering, while programmable I/O can accommodate high-speed interfaces and external control buses. Internal frequency is a device figure rather than the guaranteed performance of every user design; final interface timing depends on logic placement, routing, clocking, I/O standards, speed grade, board-level timing, and the selected I/O implementation.
Typical uses include industrial automation, telecommunications, networking infrastructure, test and measurement, high-speed data acquisition, embedded signal processing, and control systems requiring deterministic parallel hardware. The large logic capacity can consolidate multiple fixed-function circuits into one programmable device, while 448 I/O provide substantial connectivity for external memories, transceivers, clocks, and data buses.
Board design must follow the AMD package pinout and power-supply requirements for the FCBGA package. Decoupling, controlled ramp sequencing, signal-integrity routing, thermal management, and configuration-memory implementation are as important as the FPGA logic itself. Confirm the exact package drawings, ball assignments, and recommended power architecture before layout release.
This product page consolidates the device identity, package characteristics, speed-grade distinctions, verified drop-in candidates, and practical selection considerations. It also distinguishes commercial, industrial, and alternative speed-grade options that share the same physical footprint, helping engineers evaluate replacement feasibility without confusing a pin-compatible variant with an unqualified functional substitute.
Drop-in-Alternativen für XC4VLX60-11FF668C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC4VLX60-11FF668C (gleiche Bauform und Footprint) – abweichend in Speed Grade, Logic Blocks, Package, Temperature Grade, Adaptive Logic Modules.
XC4VLX60-11FF668I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC4VLX60-11FFG668C
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XC4VLX60-10FF668I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →XC4VLX60-10FF668C
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XC4VLX60-12FF668C
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XC4VLX60-12FF668I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC4VLX60-11FF668C Grenzwerte & elektrische Eigenschaften
| Device Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Cells | 59,904 cells |
| Logic Blocks | 6,656 blocks |
| I/O Count | 448 I/O |
| Internal Frequency | 1,028 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Package Type | 668-pin FCBGA |
| Package Designation | FF668 |
| Total Package Pins | 668 pins |
| Speed Grade | -11 |
| Temperature Grade | Commercial (C) |
| Betriebstemperatur | 0°C to 85°C |
| Programmable Logic | FPGA configuration architecture |
| Manufacturer | AMD / Xilinx |
| Montageart | Surface mount |
| Lebenszyklusstatus | Active |
XC4VLX60-11FF668C 668 pins Pinbelegungsleitfaden
Pinbelegung für XC4VLX60-11FF668C (668 pins-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC4VLX60-11FF668C.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC4VLX60-11FF668C ist geeignet für 6 Anwendungs: Industrial Automation and Control, Telecommunications Data Processing, High-Speed Data Acquisition, Test and Measurement Equipment, Embedded Signal Processing, Networking and Protocol Bridging.
Industrial Automation and Control
The XC4VLX60-11FF668C fits industrial control systems that combine parallel motion logic, sensor conditioning interfaces, communication bridges, and supervisory state machines. Its 59,904 logic cells and 6,656 logic blocks allow multiple control tasks to operate concurrently, while 448 I/O provide broad connectivity to sensors, actuators, field buses, and safety or monitoring logic. The commercial 0°C to 85°C grade suits factory equipment where ambient conditions remain within that range. Implementation should use the -11 timing model, preserve industrial temperature margins, and follow the FCBGA power and layout guidance. Where the enclosure can exceed 85°C, specify the industrial XC4VLX60-11FF668I variant and repeat environmental verification.
Empfohlen
Telecommunications Data Processing
The XC4VLX60-11FF668C is suitable for telecommunications equipment that performs parallel packet classification, buffering, traffic shaping, and interface conversion. Its configurable logic and block memory can accommodate multiple data paths without forcing sequential execution, while 448 I/O can connect external packet-memory devices, transceivers, clocks, and control processors. The 1,028 MHz internal frequency provides a high device clock ceiling, but usable line rate depends on pipeline depth, I/O standards, routing congestion, and timing closure. Designers should isolate high-speed interfaces, use the manufacturer's recommended clocking structure, and run post-route timing analysis with the correct -11 speed model.
Empfohlen
High-Speed Data Acquisition
The XC4VLX60-11FF668C can implement wide parallel acquisition systems where multiple channels must be sampled, filtered, correlated, or packaged concurrently. Its 59,904 logic cells provide substantial parallel processing capacity, and its 448 I/O simplify connections to multi-channel converters, custom boards, and capture memory. The 90 nm CMOS implementation and 1.2 V core supply suit demanding digital processing, although board-level data integrity remains critical. Engineers should partition acquisition, processing, and memory interfaces, constrain input timing, use supported I/O resources, and avoid interpreting the 1,028 MHz internal figure as a guaranteed analog-to-digital sample rate.
Empfohlen
Test and Measurement Equipment
The XC4VLX60-11FF668C fits configurable test systems requiring real-time sequencing, pattern generation, timing control, and instrument-bus connectivity. Parallel programmable logic can replace several fixed-function devices, while block RAM and distributed memory support capture buffers and stimulus tables. The 448 I/O provide connections to DUT fixtures, trigger logic, counters, and synchronization circuits. For precision test equipment, the -11 grade must close timing with realistic clock uncertainty and I/O loading rather than relying only on nominal device frequency. Designers should also follow AMD's decoupling, configuration, and JTAG requirements so that the FPGA remains deterministic from startup through repeated test cycles.
Empfohlen
Embedded Signal Processing
The XC4VLX60-11FF668C supports embedded signal-processing workloads such as filtering, correlation, modulation, FFT pipelines, and adaptive control implemented as parallel hardware. Its 6,656 logic blocks and 59,904 logic cells can host substantially more parallel channels than a small programmable logic device, while 448 I/O allow simultaneous connection to converters, memory, and synchronization logic. The -11 grade provides a middle performance class, making it appropriate when an -10 design has inadequate timing margin but an -12 grade is unnecessary. Implementation should exploit pipelining and block RAM effectively, then verify maximum clock frequency after placement and routing rather than estimating performance from logic-cell count alone.
Empfohlen
Networking and Protocol Bridging
The XC4VLX60-11FF668C can implement protocol converters, frame processors, packet filters, and multi-port interface bridges because its programmable logic supports simultaneous handling of several data streams. The 448 I/O provide extensive connectivity for physical-layer devices, memories, management processors, and backplane signals, while internal RAM supports queues and protocol state. The 1.2 V core supply and dense FCBGA package demand careful power-plane and via planning to limit simultaneous-switching noise and maintain signal integrity. Engineers should constrain timing-critical paths, reserve configuration resources, and verify that the selected -11 speed grade closes timing under realistic board conditions before releasing the PCB for fabrication.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC4VLX60-11FF668C – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC4VLX60-11FF668I | XC4VLX60-11FFG668C | XC4VLX60-10FF668I | XC4VLX60-10FF668C | XC4VLX60-12FF668C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-pin FF668 FCBGA | 668-pin FF668 FCBGA | 668-pin FF668 FCBGA | 668-pin FF668 FCBGA | 668-pin FF668 FCBGA | 668-pin FF668 FCBGA |
| Speed Grade | -11 | -11 | -11 | -10 | -10 | -12 |
| Temperature Grade | Commercial C, 0°C to 85°C | Industrial I | Commercial C | Industrial I | Commercial C | Commercial C |
| Logic Cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells |
| Logic Blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks |
| I/O Count | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Internal Frequency | 1,028 MHz | 1,028 MHz | 1,028 MHz | 1,028 MHz device figure | 1,028 MHz device figure | 1,028 MHz device figure |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Wichtigste Unterscheidungsmerkmale
- Provides a -11 timing class within the same FF668 package (vs. XC4VLX60-10FF668C)
- Maintains the same -11 speed class when industrial environmental qualification is required (vs. XC4VLX60-10FF668I)
- Offers a lead-free ordering option with unchanged speed and package (vs. XC4VLX60-11FF668C)
- Provides additional timing headroom without changing the physical footprint (vs. XC4VLX60-11FF668C)
Designhinweise
Use the AMD/Xilinx Virtex-4 FCBGA package files for every ball assignment before routing. The FF668 package includes dedicated configuration, clock, power, ground, and user-I/O balls, so a simplified symbol can omit critical connections. Confirm the exact FF668 land pattern, ball map, and power architecture against the selected device ordering code. Place the FPGA reference design's decoupling network as closely as practical to the package, and preserve the documented current-initialization and sequencing behavior of the power regulators.
The 448 I/O and 1,028 MHz internal clock figure make routing discipline essential even when the external interface runs at a lower rate. Separate noisy outputs from sensitive inputs, use short return paths for reference planes, and apply the manufacturer's recommended I/O drive, slew, and termination choices. Use the -11 timing model during implementation and examine post-route timing, clock skew, and bus contention. A pin-compatible speed-grade replacement does not guarantee that an unchanged constraint set still closes timing.
Estimated: a 1.2 V core supply at a 1 A device current corresponds to approximately 1.2 W of core-rail power before accounting for I/O and auxiliary rails. This is a design estimate, not a manufacturer power specification. Actual dissipation depends on configured logic, switching activity, I/O load, and process behavior. Validate thermal performance with the implemented design, including FCBGA solder-joint and board-level effects, because package and ambient conditions determine whether the commercial 0°C to 85°C grade is acceptable.
Do not treat the G, C, or I ordering suffix as cosmetic. The C suffix identifies the commercial grade, the I suffix identifies the industrial grade, and the FFG668C ordering code is identified as lead-free. Before substituting a candidate, compare speed grade, environmental grade, package revision, silicon revision, configuration bitstream support, and all package power pins. Also confirm that a replacement is the exact MPN rather than a shortened catalog number that omits meaningful grade information.
A dense 668-pin FPGA can create simultaneous-switching-noise and return-path problems even when the logic clock is moderate. Use continuous power and ground planes with dense via stitching, distribute high-frequency decoupling close to the device, and keep sensitive clock and data nets away from noisy outputs. Validate edge rates, impedance, stub lengths, and I/O standards with the board stack-up and the manufacturer's I/O guidance. Post-layout signal-integrity analysis is recommended for high-speed external interfaces.
Compliance-Informationen
The XC4VLX60-11FFG668C ordering code is identified as lead-free, but no general RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for the target XC4VLX60-11FF668C. Automotive qualification is not indicated.