XC7A75T-2FTG256I - 75K Logic Cell Artix-7 FPGA | AMD
Teilenummer: XC7A75T-2FTG256I ✓ AktivXC7A75T-2FTG256I Übersicht
An FPGA is a semiconductor whose digital behavior is defined after manufacture by loading a configuration bitstream. Artix-7 belongs to the AMD 7 Series FPGA family, which sits within the broader semiconductor and programmable-logic hierarchy. The XC7A75T device is positioned above smaller Artix-7 members in logic density while retaining the low-cost and power-efficient characteristics associated with the Artix-7 product line. It is suited to designs requiring substantial parallel processing but not the very high logic capacity of Kintex-7 or Virtex-7 devices.
The 75,520 logic cells and 11,800 adaptive logic modules provide substantial programmable fabric for control logic, protocol handling and image-processing pipelines. The device includes 628 DSP slices, block RAM for frame buffers and data queues, and mixed-signal resources for precision analog interfaces. Its 170 user I/Os support connections to external memory, sensors, displays, converters and industrial peripherals. The -2 speed designation identifies the device performance grade, while the final I suffix identifies the industrial-temperature option.
The 28 nm CMOS implementation and low-power Artix-7 architecture target high performance per watt. Dedicated clock-management and DSP resources reduce the amount of general-purpose logic needed for common filtering, waveform generation and clocking functions. High-speed serial transceivers also allow Artix-7 designs to implement serial links directly in the FPGA instead of requiring separate physical-layer devices when the interface rates and protocols are supported.
Typical uses include industrial automation, motor control, robotics, sensor acquisition, test equipment, camera and image processing, communications gateways, embedded control and low-cost prototyping. Its 75K-cell fabric allows multiple control paths and parallel algorithms to be combined in one device, while the 628 DSP slices accelerate multiplication and filtering operations. The 256-ball FBGA package supports dense routing but requires careful PCB layout, power planning and thermal analysis.
Designers should assign power, ground and signal pins according to the AMD package pinout files and use the UG475 package specification when assigning PCB tracks. Decoupling must be placed close to supply pins, unused I/Os should be handled according to the configuration guidance, and every bank must satisfy its voltage and clocking constraints. Differential pairs and high-speed links require controlled impedance, length matching and uninterrupted reference planes.
This page combines the exact XC7A75T-2FTG256I identity, verified device characteristics, same-package Artix-7 drop-in options and practical implementation guidance. It also distinguishes speed, temperature and package options so engineers can select a replacement without overlooking PCB or qualification constraints.
Drop-in-Alternativen für XC7A75T-2FTG256I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XC7A75T-2FTG256I (gleiche Bauform und Footprint) – abweichend in Device Type, Package, Performance Grade, Process Technology, Temperature Grade.
XC7A75T-2FTG256C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7A75T-2FTG256E
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7A75T-3FTG256E
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7A75T-3FTG256I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7A75T-1FTG256I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XC7A75T-2FTG256I Grenzwerte & elektrische Eigenschaften
| Device Type | Artix-7 FPGA |
| Logic Cells | 75,520 cells |
| Adaptive Logic Modules | 11,800 ALMs |
| User I/O Count | 170 I/Os |
| DSP Slices | 628 slices |
| Process Technology | 28 nm CMOS |
| Core Supply Voltage | 1 V |
| Performance Grade | -2 speed grade |
| Temperature Grade | Industrial grade |
| Gehäuse | 256-ball FBGA |
| Montageart | Surface mount |
| Programmable Logic Type | FPGA |
XC7A75T-2FTG256I 256-ball fbga Pinbelegungsleitfaden
Pinbelegung für XC7A75T-2FTG256I (256-ball fbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XC7A75T-2FTG256I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XC7A75T-2FTG256I ist geeignet für 6 Anwendungs: Industrial Automation and PLC Control, Motor Control and Real-Time Signal Processing, Machine Vision and Image Processing, Industrial Sensor Fusion, Communications Gateway and Protocol Bridge, Test, Measurement and Instrumentation.
Industrial Automation and PLC Control
The XC7A75T-2FTG256I fits industrial controllers that combine deterministic logic, communications and sensor processing. Its 75,520 logic cells and 11,800 adaptive logic modules can host state machines, protocol engines and machine-control logic, while 170 I/Os provide connections to sensors, actuators and field-bus transceivers. The industrial-temperature designation supports equipment deployed in factories and other extended-temperature environments. Place power and ground connections according to the FTG256 package data, provide local decoupling at every supply group and keep high-speed routing away from noisy switching nodes. Validate timing against the selected clock, I/O standard and peripheral timing before production.
Empfohlen
Motor Control and Real-Time Signal Processing
The XC7A75T-2FTG256I is suitable for digital motor controllers and real-time signal-processing subsystems because its 628 DSP slices can accelerate filtering, correlation and fixed-point transforms without consuming the entire general-purpose fabric. The 75,520 logic cells can manage encoder decoding, current-loop control, fault handling and communications concurrently. The -2 speed grade supports timing-oriented designs, and 170 I/Os allow direct interface to gate drivers, position sensors and measurement converters. Keep PWM and high-current switching interfaces physically separated from sensitive control logic, use controlled return paths for power stages and verify settling time, latency and numerical accuracy for the implemented control algorithm.
Empfohlen
Machine Vision and Image Processing
The XC7A75T-2FTG256I offers enough programmable fabric and DSP capacity for compact machine-vision preprocessing systems, including pixel classification, line extraction, thresholding and sensor-format conversion. The 628 DSP slices support parallel arithmetic, while the remaining logic resources can implement frame buffers, triggers and data-reduction pipelines. Its 170 I/Os can connect to image sensors, capture devices and programmable logic devices. Use the FPGA block RAM for localized pixel storage and avoid routing wide image buses through general I/O unless the device has been configured for that interface. Validate image timing, memory bandwidth and camera synchronization before fixing the PCB layout.
Empfohlen
Industrial Sensor Fusion
The XC7A75T-2FTG256I can combine multiple sensor streams in an industrial edge-processing module. Its 75,520 logic cells support conditioning, timestamp handling and protocol conversion, while the DSP blocks accelerate filtering and feature extraction. The 170 I/Os provide flexible connectivity to analog-to-digital converters, digital sensors, memory and communications modules. The industrial-temperature grade is useful in machinery where heat, vibration and temperature variation are significant. Assign unused pins according to AMD configuration guidance, provide continuous power and ground planes, and isolate high-impedance sensor inputs from switching nodes to reduce coupling and measurement error.
Empfohlen
Communications Gateway and Protocol Bridge
The XC7A75T-2FTG256I is appropriate for gateways that translate between industrial and embedded communication formats. Its 75,520 logic cells can implement multiple packet engines, buffering logic and protocol state machines, while 170 I/Os support parallel interfaces to processors, PHYs and transceivers. Integrated Artix-7 serial resources can support compatible serial links, reducing external component count when the protocol and line rate are supported. Constrain the selected interfaces according to AMD timing guidance, use length-matched differential routing and keep connector and switching-node return currents away from sensitive clock inputs. Confirm the complete interface specification and configuration requirements before approving a board.
Empfohlen
Test, Measurement and Instrumentation
The XC7A75T-2FTG256I fits compact instrumentation requiring deterministic acquisition, digital correction and flexible control logic. The 628 DSP slices support filtering, interpolation and demodulation, while the programmable fabric manages triggers, calibration tables and instrument communication. With 170 I/Os, the device can connect data converters, memory, displays and control peripherals in a single package. The industrial-temperature option allows deployment in equipment with elevated internal temperatures. Use separate power islands where required by the bank plan, minimize loop area in sensitive analog-adjacent routing and verify that the selected memory interface and converters meet the device's timing constraints.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XC7A75T-2FTG256I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XC7A75T-2FTG256C | XC7A75T-2FTG256E | XC7A75T-3FTG256E | XC7A75T-3FTG256I | XC7A75T-1FTG256I |
|---|---|---|---|---|---|---|
| Package | FBGA-256 | FBGA-256 - same | FBGA-256 - same | FBGA-256 - same | FBGA-256 - same | FBGA-256 - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Logic Cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells | 75,520 cells |
| User I/O Count | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os |
| DSP Slices | 628 slices | 628 slices | 628 slices | 628 slices | 628 slices | 628 slices |
| Process Technology | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS | 28 nm CMOS |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | -2 | -2, same | -2, same | -3, one grade faster | -3, one grade faster | -1, one grade slower |
| Temperature Grade | Industrial | Commercial | Extended | Extended | Industrial | Industrial |
Wichtigste Unterscheidungsmerkmale
- Industrial-temperature qualification in the exact -2 FTG256 configuration (vs. XC7A75T-2FTG256C)
- Higher speed option is available in the same FTG256 footprint (vs. XC7A75T-1FTG256I)
- Extended-temperature family alternative without changing package geometry (vs. XC7A75T-2FTG256E)
- Complete logic and DSP resource set for parallel industrial workloads (vs. XC7A50T-2FTG256I)
Designhinweise
Use the FTG256 package power and ground assignments from the AMD pinout files rather than treating all balls as interchangeable. Place the required bulk and high-frequency decoupling capacitors close to their associated supply and ground balls, with separate clean return paths for core and I/O currents. Check each bank voltage against its assigned I/O standard before configuration. Power sequencing, startup current and the precision requirements of the 1 V core supply must follow the manufacturer power-guidance document.
The 256-ball FBGA footprint has dense escape routing, so fan-out strategy, via placement and solder-mask design materially affect assembly yield. Follow the AMD recommended land pattern and the PCB and assembly guidance applicable to a 1 mm or finer FBGA. Place decoupling before vias wherever the escape topology permits, avoid via stubs on high-speed nets and preserve symmetry on differential pairs. Confirm the board fabrication stack-up, pad definition and assembly process with the selected PCB manufacturer.
Constrain all board interfaces against the selected I/O standard and clock topology. For high-speed serial links, use the package pin locations identified in the FTG256 pinout files, maintain the specified spacing and provide a continuous reference plane. Keep clocks away from switching nodes and noisy power inductors, and route clock and data as a matched group where source-synchronous timing is used. Validate eye opening, jitter and timing margins with the actual channel and enclosure.
Artix-7 power dissipation depends on configuration, clocking, I/O activity and the selected speed grade, so calculate the design from actual utilization rather than a generic device maximum. Account for the thermal resistance of the specific PCB and enclosure, and provide copper area and airflow appropriate to the permitted junction temperature. Estimate the worst-case operating condition with high I/O activity and an elevated ambient temperature, then confirm it through implementation-level thermal analysis.
Do not substitute an FGG484 or FGG676 XC7A75T device onto an FTG256 board: the package outlines, ball counts and pin assignments differ. Within the FTG256 family, changing the speed or temperature suffix can alter qualification and timing margins even when the footprint remains unchanged. Compare the complete ordering information, migration guidance and device parameters before releasing a replacement to production.
Compliance-Informationen
The component is an industrial-temperature FPGA, not an AEC-Q100-qualified automotive part. Specific environmental and substance-compliance declarations were not established for this exact suffix.