XMC4400F100F256ABXQSA1 - Cortex-M4 MCU | Infineon
Teilenummer: XMC4400F100F256ABXQSA1 ✓ AktivXMC4400F100F256ABXQSA1 Übersicht
A microcontroller is a programmable semiconductor that executes embedded control code, monitors inputs, drives outputs, and manages communication interfaces. The XMC4400 combines an ARM Cortex-M4 processor with flash memory, SRAM, analog and digital peripherals, Ethernet support, and debug facilities in one integrated circuit. Its role within an embedded system spans processor core, real-time control peripheral, communication controller, and industrial-control semiconductor.
The 120 MHz Cortex-M4 core supports efficient 32-bit processing, while the XMC4000 peripheral architecture supports predictable control-loop execution. The 256 KB embedded flash stores firmware and configuration data, and the 80 KB SRAM provides working memory for protocol stacks, acquisition buffers, and control algorithms. Integrated Ethernet makes the device suitable for networked industrial nodes without requiring a separate communication processor.
Three principal characteristics define this configuration: a 120 MHz ARM Cortex-M4 processor, 256 KB of embedded flash, and a compact 64-LQFP package. Infineon identifies the underlying XMC4400-F100F256-BA device as an industrial Cortex-M4 microcontroller with Ethernet. The ordering designation XMC4400F100F256ABXQSA1 identifies the specific package, temperature, flash-memory, and orderable configuration used in the product record.
Typical applications include industrial Ethernet controllers, programmable automation equipment, connected sensors, motor and motion-control systems, and embedded gateways. The microcontroller is especially useful where a single-core design must combine real-time control, local data processing, and Ethernet communication. Its combination of control peripherals, memory, and connectivity supports consolidation of functions that might otherwise require several discrete devices.
When designing around the XMC4400F100F256ABXQSA1, preserve the exposed-pad thermal and electrical requirements of the LQFP package and assign every pin according to the manufacturer pin-description table. The Ethernet interface also requires careful clock, magnetics, routing, and isolation planning. Firmware selection should account for the 256 KB flash limit and the 80 KB SRAM allocation, including driver stack, application code, and diagnostic data.
This product record combines the exact XMC4400F100F256ABXQSA1 ordering information with manufacturer electrical documentation, package guidance, application context, and same-family migration options. It is intended to support component identification, firmware and peripheral planning, PCB design, and replacement assessment without obscuring the differences between ordering codes and electrically distinct devices.
Drop-in-Alternativen für XMC4400F100F256ABXQSA1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit XMC4400F100F256ABXQSA1 (gleiche Bauform und Footprint) – abweichend in Ethernet Support, Package, Product Type.
XMC4400F100F256ABXQMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XMC4400F100F256ABAQMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XMC4400F100F256BAXUMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XMC4400F100K256BAXUMA1
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
XMC4400F100K256BAXUMA2
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →XMC4400F100F256ABXQSA1 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ARM Cortex-M4 industrial microcontroller |
| Product Series | XMC4000 |
| Processor Core | ARM Cortex-M4 |
| CPU Bit Width | 32 bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM | 80 KB |
| Ethernet Support | Yes |
| Core Configuration | Single core |
| Versorgungsspannung | 3.3 V |
| Gehäuse | PG-LQFP-64-19 with exposed pad |
| Montageart | Surface mount |
XMC4400F100F256ABXQSA1 pg-lqfp-64-19 with exposed pad Pinbelegungsleitfaden
Pinbelegung für XMC4400F100F256ABXQSA1 (pg-lqfp-64-19 with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XMC4400F100F256ABXQSA1.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XMC4400F100F256ABXQSA1 ist geeignet für 6 Anwendungs: Industrial Ethernet Controllers, Programmable Automation Equipment, Connected Sensor Hubs, Motor and Motion Control, Embedded Gateways, Building and HVAC Control.
Industrial Ethernet Controllers
The XMC4400F100F256ABXQSA1 fits industrial Ethernet controllers that combine deterministic machine control with network communication. Its 120 MHz ARM Cortex-M4 core can process control tasks and protocol activity, while 80 KB of SRAM provides working memory for buffers and Ethernet stacks. The 256 KB flash stores application firmware and configuration data. A key implementation consideration is that network traffic must not delay critical control loops, so interrupt priority, DMA behavior, and task scheduling should be designed together. Ethernet magnetics, clocking, termination, and isolation require careful PCB implementation.
Empfohlen
Programmable Automation Equipment
The XMC4400F100F256ABXQSA1 is suitable for programmable automation controllers that coordinate sensors, actuators, interlocks, and diagnostics. Its 120 MHz Cortex-M4 performance provides deterministic handling of real-time tasks, and the 256 KB flash and 80 KB SRAM are adequate for compact control applications without an external memory interface. Designers should allocate firmware space for motion routines, safety diagnostics, communications, and field updates, then confirm that the worst-case execution time remains below each control interval. The exposed pad also needs a low-impedance thermal path.
Empfohlen
Connected Sensor Hubs
The XMC4400F100F256ABXQSA1 can serve as the local controller in a connected sensor hub that normalizes measurements, applies filtering, records events, and forwards information over Ethernet. Its 120 MHz core supports concurrent acquisition and control tasks, while 80 KB of SRAM allows time-series buffers and protocol working space. Firmware designers should use bounded queues to prevent a slow network transfer from blocking sensor acquisition. Input conditioning, analog grounding, digital isolation, and connector protection must be designed around the application rather than treated as part of the MCU footprint.
Empfohlen
Motor and Motion Control
The XMC4400F100F256ABXQSA1 is appropriate for compact motor and motion-control systems that require a fast Cortex-M4 core, deterministic peripherals, and network management in one device. The 256 KB flash can retain motion algorithms and configuration, while 80 KB of SRAM supports control-state variables and communication buffers. Actual motor suitability depends on the required PWM resolution, encoder interface, current-sense bandwidth, update rate, and external power stage. Keep high-current switching paths separate from sensitive analog references, and validate timing against the worst-case control loop before hardware release.
Empfohlen
Embedded Gateways
The XMC4400F100F256ABXQSA1 fits embedded gateways that translate local machine data into Ethernet services. Its 120 MHz ARM Cortex-M4 core handles protocol conversion and control tasks, the 256 KB flash stores gateway firmware, and 80 KB of SRAM supports packet processing and temporary state. The memory budget must include protocol stacks, TLS or authentication functions where required, logging, and update recovery. Designers should boot from a controlled firmware path, protect configuration data from unintended writes, and isolate external network interfaces from the main processor supply when the application requires galvanic separation.
Empfohlen
Building and HVAC Control
The XMC4400F100F256ABXQSA1 can support networked HVAC controllers, room-control units, and building equipment that combine sensing, scheduling, and communications. Its Cortex-M4 processing supports responsive control logic, while Ethernet enables centralized monitoring and remote diagnostics. Firmware should separate safety-critical timing from reporting traffic and use timers for repeatable control updates. Hardware design must account for relay or triac switching noise, long wiring paths, surge exposure, and grounding. A watchdog, safe-state defaults, and recovery after communication loss are important for unattended equipment.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XMC4400F100F256ABXQSA1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | XMC4400F100F256ABXQMA1 | XMC4400F100F256ABAQMA1 | XMC4400F100F256BAXUMA1 | XMC4400F100K256BAXUMA1 | XMC4400F100K256BAXUMA2 |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-64-19 with exposed pad | PG-LQFP-64-19 | PG-LQFP-64-19 | PG-LQFP-64-19 | PG-LQFP-64-19 | PG-LQFP-64-19 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB ordering class | 256 KB ordering class |
| SRAM | 80 KB | 80 KB | 80 KB | 80 KB | 80 KB | 80 KB |
| Ethernet Support | Yes | Yes | Yes | Yes | Yes | Yes |
| Core Configuration | Single core | Single core | Single core | Single core | Single core | Single core |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Ordering-Suffix Difference | ABXQSA1 | ABXQMA1; temperature-code difference | ABAQMA1; ordering-code difference | BAXUMA1; delivery-code difference | BAXUMA1; ordering-code difference | BAXUMA2; ordering-code difference |
Wichtigste Unterscheidungsmerkmale
- Retains the complete target performance configuration (vs. XMC4400F100F256BAXUMA1)
- Provides a same-family migration path without changing the processor architecture (vs. XMC4400F100K256BAXUMA1)
- Matches the target memory hierarchy for firmware and working data (vs. XMC4400F100K256BAXUMA2)
Designhinweise
Treat the exposed pad as both an electrical and thermal feature. Connect it according to the Infineon package drawing, provide a low-impedance path to the ground plane, and avoid placing a keepout beneath the thermal area. Estimated: with a 120 MHz Cortex-M4 workload, package dissipation depends on the selected clock gating, peripheral activity, and supply voltage, so calculate the worst-case internal and I/O power before assigning copper area. Use the manufacturer thermal data for the final junction-temperature and board-layout assessment.
Use the manufacturer pin-description table for all 64 terminals and the exposed pad, particularly for alternate-function pins. Place decoupling capacitors at the appropriate supply pins with short, direct return paths to the ground plane. Keep switching-node and high-current return paths away from Ethernet clocks, analog inputs, and precision references. Maintain the specified component spacing around the package so production assembly, inspection, and exposed-pad soldering can be performed consistently.
Plan the Ethernet interface as a controlled-impedance section rather than as ordinary digital routing. Route differential pairs continuously over a stable reference plane, minimize stubs and layer transitions, and follow the Ethernet physical-layer design guidance for magnetics, line-side surge protection, and isolation. Keep the 120 MHz processor activity and switching supplies away from the Ethernet differential pairs. After layout fabrication, verify continuity, differential impedance, and connector return-path continuity.
Do not treat a shared XMC4400 family name as proof of drop-in equivalence. Compare the complete ordering code for flash capacity, temperature grade, package, qualification, programming configuration, and delivery format. The 256 KB flash and 80 KB SRAM must also be checked against the complete firmware and runtime-memory budget. For a proposed substitute, review the manufacturer data sheet, errata, and reference manual before releasing a new PCB or production order.
Compliance-Informationen
The component is identified as an industrial ARM Cortex-M4 microcontroller. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not stated in the manufacturer product record excerpts and should be confirmed for the complete ordering code before qualification.