XMC4400F64K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
Teilenummer: XMC4400F64K512ABXQSA1 ✗ AbgekündigtXMC4400F64K512ABXQSA1 Übersicht
A microcontroller such as the XMC4400F64K512ABXQSA1 integrates a processor core, embedded nonvolatile program memory, SRAM, peripherals, and communication interfaces into one semiconductor package. Within the device hierarchy, it is an Arm Cortex-M4 MCU, a 32-bit microcontroller and embedded processor. The XMC4000 family combines deterministic real-time control with Ethernet-oriented connectivity, allowing one device to manage machine control tasks and networked communication functions.
The key specifications are a 120 MHz maximum CPU frequency, 512 KB of flash organized as 512K × 8 bits, and a 64-pin PG-LQFP-19 package. Infineon identifies the related XMC4400-F64K512-BA ordering designation as an industrial Arm Cortex-M4 MCU with Ethernet MAC. The suffix used for the complete ordering code also identifies the package, temperature class, and other ordering options, so engineers should preserve the full MPN when procuring or redesigning a PCB.
The Cortex-M4 architecture uses the ARM instruction set and is suitable for interrupt-driven embedded workloads. Its 120 MHz operating point provides substantially more processing headroom than lower-frequency general-purpose MCUs, while 512 KB of flash permits larger application code, boot code, communication stacks, and field-update routines on the same die. Peripheral details, clock configurations, memory sizes beyond flash, and electrical limits must be confirmed in the XMC4400 manufacturer datasheet and its derivative-device ordering information.
Typical uses include industrial Ethernet controllers, factory automation equipment, networked sensors, motor-control supervisory systems, and industrial communications gateways. The Ethernet MAC makes the MCU particularly relevant where local control and network connectivity must share one platform. It can also support secure serial or fieldbus communication designs when the appropriate peripherals and external transceivers are used, although the exact interface mix for this derivative must be checked in the device documentation.
PCB design should preserve the exposed-pad connection specified for the PG-LQFP-19 package and follow the manufacturer’s land-pattern and thermal-land guidance. The 120 MHz processing capability requires careful clock, decoupling, and signal-integrity planning, while the Ethernet interface demands controlled routing and appropriate external network components. Do not assume that an MCU with the same package is electrically interchangeable; validate supply limits, peripheral mapping, pin multiplexing, boot behavior, and software-device configuration before substitution.
This product record combines the manufacturer ordering information, family datasheet characteristics, package details, lifecycle indication, and practical design guidance. It also distinguishes true drop-in replacements from merely similar controllers, helping engineers assess PCB reuse, firmware impact, sourcing status, and qualification requirements without treating package similarity as proof of compatibility.
Drop-in-Alternativen für XMC4400F64K512ABXQSA1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernXMC4400F64K512ABXQSA1 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit Arm Cortex-M4 microcontroller |
| Microcontroller Series | XMC4000 series |
| CPU Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory Size | 512 KB |
| Flash Organization | 512K x 8 bits |
| Instruction Width | 32 bit |
| Operating Voltage | 3.3 V |
| Ethernet MAC | Yes |
| Gehäuse | PG-LQFP-64-19 |
| Pin-Anzahl | 64 pins |
| Package Type | LQFP with exposed pad |
| Temperature Grade | Automotive |
| Application Class | Industrial |
| Montageart | Surface mount |
XMC4400F64K512ABXQSA1 lqfp with exposed pad Pinbelegungsleitfaden
Pinbelegung für XMC4400F64K512ABXQSA1 (lqfp with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XMC4400F64K512ABXQSA1.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XMC4400F64K512ABXQSA1 ist geeignet für 6 Anwendungs: Industrial Ethernet Automation Controller, Networked Sensor Gateway, Factory Motor-Control Supervisor, Industrial Communications Gateway, Real-Time Data Acquisition System, Embedded Condition-Monitoring Controller.
Industrial Ethernet Automation Controller
The Infineon XMC4400F64K512ABXQSA1 fits an industrial Ethernet automation controller because its XMC4000 architecture combines a 120 MHz Arm Cortex-M4 core with Ethernet MAC capability in a 64-pin PG-LQFP-19 package. The controller can divide processing between deterministic machine-control tasks and network communication, reducing the need for separate supervisory components. Its 512 KB of flash provides room for an embedded application, protocol handlers, and boot logic. Ethernet magnetics, isolation, and any required physical-layer components must be added according to the selected network topology. Firmware should validate boot options, peripheral assignments, and watchdog behavior before production release.
Empfohlen
Networked Sensor Gateway
A networked sensor gateway can use the XMC4400F64K512ABXQSA1 to collect local sensor information, preprocess data, and communicate over an Ethernet-based network. The 120 MHz Cortex-M4 core provides more headroom than required for simple register polling, while the 512 KB flash capacity supports a substantial embedded program and network stack. The 64-pin surface-mount package is suitable for compact control boards, although the exposed pad and Ethernet magnetics require deliberate PCB planning. Select the exact peripheral configuration and verify pin multiplexing before assigning sensors or communication lines, especially when the design also uses high-speed clocking or external serial storage.
Empfohlen
Factory Motor-Control Supervisor
The XMC4400F64K512ABXQSA1 is appropriate for a factory motor-control supervisor that coordinates sequencing, diagnostics, communications, and fault handling around one or more motor drivers. Its 120 MHz Cortex-M4 performance supports responsive supervisory logic, and its 512 KB flash can hold control software, parameter tables, and diagnostic routines. The MCU should remain separated from the high-current power stage, with appropriately rated isolation and signal conditioning where required. Use the manufacturer’s pin and peripheral tables to confirm timer, communication, and interrupt resources, and complete thermal validation with the final PCB copper and enclosure rather than estimating it from the package name alone.
Empfohlen
Industrial Communications Gateway
The Infineon XMC4400F64K512ABXQSA1 can serve as the central controller in an industrial communications gateway that translates between Ethernet and local fieldbus or serial interfaces. Its 120 MHz processing capability allows protocol processing and diagnostics to coexist, and 512 KB of flash supports firmware, protocol tables, and configuration data. The device is best used where deterministic control and network connectivity must remain on one PCB. Interface transceiver selection remains application-specific, and galvanic isolation requirements must be assessed for the installation environment. Firmware isolation, watchdog settings, and recovery after link or bus faults are essential production considerations.
Empfohlen
Real-Time Data Acquisition System
The XMC4400F64K512ABXQSA1 fits a real-time data-acquisition system requiring local sampling control, buffering, and network transfer. A 120 MHz Cortex-M4 core can service interrupts, perform data conditioning, and maintain an acquisition state machine, while 512 KB of flash holds the control application and update mechanism. Actual converter interfaces and channel counts must match the selected XMC4400 derivative and should not be inferred solely from the series name. For a production board, follow the manufacturer’s decoupling, clock, and exposed-pad guidance and validate acquisition timing with the complete analog front end, since the MCU cannot compensate for an unsuitable signal chain.
Empfohlen
Embedded Condition-Monitoring Controller
A condition-monitoring controller can use the XMC4400F64K512ABXQSA1 to acquire vibration, temperature, or current-related measurements, detect operating conditions, and report events through a network. The 512 KB flash provides storage for application code and configurable thresholds, while the Ethernet MAC supports connected diagnostics without another communications controller. Power consumption and thermal rise should be calculated for the final sensing duty cycle and ambient temperature. Keep analog inputs away from the clock and Ethernet routing where practical, follow the manufacturer’s grounding guidance, and validate interrupt latency and watchdog recovery as part of functional safety planning for machinery monitoring systems.
Empfohlen
Technische Referenzdaten für XMC4400F64K512ABXQSA1 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Brand | Infineon Technologies |
| Package | PG-LQFP-64-19 |
| CPU Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Operating Voltage | 3.3 V |
| Ethernet MAC | Yes |
| Application Class | Industrial |
Wichtigste Unterscheidungsmerkmale
- Higher embedded flash capacity than the compared XMC4402 derivative (vs. XMC4402F64F256ABXQMA1)
- Complete ordering-code identity for an established XMC4000 configuration (vs. XMC4400F64K512ABXQSA1)
- Ethernet MAC integrated into the XMC4000 control platform (vs. XMC4400F64K512ABXQSA1)
Designhinweise
Use the Infineon PG-LQFP-64-19 land pattern rather than constructing a footprint from the generic LQFP-64 name. Reserve a solder-mask-defined exposed-pad region with the manufacturer-recommended dimensions and place a thermal via array according to the assembly process. Confirm pin 1 orientation against the package drawing, and verify lead pitch, body size, and courtyard against the ordering code before releasing Gerber files.
Treat the exposed pad as the principal heat-spreading path and evaluate junction temperature using the final PCB copper area, via pattern, ambient temperature, and estimated internal dissipation. A useful preliminary estimate is Pdissipation = 3.3 V × operating current, followed by Tj = Ta + Pdissipation × effective junction-to-ambient thermal resistance. These calculations are estimates; use the manufacturer’s electrical limits and a thermal model matched to the assembled board for final qualification.
Keep the 120 MHz clock path short, return it over a continuous reference plane, and route it away from Ethernet and other high-speed signals. Follow the datasheet’s recommended decoupling network with the smallest capacitor placed nearest each supply pin. Provide clean return paths beneath the MCU and isolate noisy switching nodes from analog or sensing inputs to reduce coupling into the controller’s measurements and communications.
Do not treat XMC4400 series derivatives as interchangeable solely because they use the same family or a 64-pin package. Verify the exact ordering code, flash size, peripheral set, Ethernet configuration, boot behavior, temperature grade, exposed-pad construction, and software device configuration. In particular, XMC4402F64F256ABXQMA1 has 256 KB of flash rather than 512 KB, so it can fail to fit the firmware even if a board-level pin comparison appears favorable.
Compliance-Informationen
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the complete MPN. The automotive temperature-grade indication must not be treated as proof of AEC-Q100 qualification.