XPC8260VVHFBC - 166MHz 32-Bit PowerPC Processor | NXP
Teilenummer: XPC8260VVHFBC ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
XPC8260VVHFBC Übersicht
A microprocessor is an integrated semiconductor device that executes instructions, processes data, and controls other components in an embedded system. This processor belongs to the PowerPC G2 architecture, the MPC82xx product family, embedded processors, and semiconductor hierarchy. Its communications-processor positioning makes it relevant to equipment requiring integrated network-facing control and real-time processing.
The verified distributor data establishes one processing core, a 32-bit architecture, a 166 MHz clock, 1.8 V operation, and a 480-ball BGA package. These parameters make the part suitable for legacy embedded telecommunications, networking, and industrial-control equipment when software and hardware are already designed around the MPC8260 platform. Detailed memory, peripheral, cache, and thermal ratings remain unavailable in the supplied evidence.
The PowerPC G2 core provides the fundamental instruction-processing capability while the MPC82xx family integration is intended for communications-oriented embedded designs. Compared with a discrete processor, memory, network interface, and serial I/O arrangement, this device offers a higher level of functional integration. However, its 480-ball package requires careful PCB layout, inspection, and assembly controls.
Typical uses include communications controllers, routers, gateways, embedded network equipment, and legacy industrial systems. The device is most appropriate when an existing MPC82xx software image, peripheral arrangement, or board design is being maintained rather than newly developed. Software migration, thermal verification, and long-term sourcing should therefore be treated as primary engineering concerns.
For a new PCB, preserve the original MPC8260 reference design unless an authoritative replacement guide proves equivalence. Keep power and ground distribution symmetrical, follow the manufacturer’s ball-map and exposed-pad requirements, and validate every BGA assembly process. The supplied web results do not expose a manufacturer datasheet URL, complete pin map, or verified thermal design data.
This product record combines verified distributor specifications, procurement URLs, lifecycle caveats, and replacement research. It also distinguishes confirmed drop-in candidates from package or function suggestions that lack enough evidence for unconditional substitution.
Drop-in-Alternativen für XPC8260VVHFBC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PC8260AMTPUMB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PCX8260AMTPUMB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PC8265MTPUMC
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PC8265AMTPUMC
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
XPC8260VVHFBC Grenzwerte & elektrische Eigenschaften
| Product Type | PowerPC G2 Microprocessor IC |
| Processor Family | MPC82xx |
| Architecture | PowerPC G2 |
| Bit Width | 32-bit |
| Core Count | 1 core |
| Maximale Taktfrequenz | 166 MHz |
| Versorgungsspannung | 1.8 V |
| Gehäuse | 480-TBGA (37.5 mm x 37.5 mm) |
| Ball Count | 480 balls |
| Package Family | TBGA |
| Montageart | Surface Mount |
| Temperature Grade | Commercial |
| Terminal Form | Ball |
| Package Shape | Square |
| Exposed Pad | Present |
| Target Application | Telecommunications and networking |
XPC8260VVHFBC square Pinbelegungsleitfaden
Pinbelegung für XPC8260VVHFBC (square-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für XPC8260VVHFBC.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
XPC8260VVHFBC ist geeignet für 6 Anwendungs: Legacy Telecommunications Controllers, Embedded Network Equipment, Industrial Control Systems, Protocol Conversion Equipment, Communications Line Cards, Legacy Router and Gateway Repair.
Legacy Telecommunications Controllers
The XPC8260VVHFBC fits maintenance of telecommunications controller boards built around the MPC82xx PowerPC G2 architecture. Its verified one-core, 32-bit design and 166 MHz clock provide a known platform for legacy protocol processing, equipment control, and board revision support. The strongest use case is an installed design whose firmware and hardware are already qualified for the device, because an exact ordering-code and package match would minimize boot, peripheral, and timing risk. Confirm memory-device compatibility, bus timing, reset behavior, and firmware support against the exact hardware manual before installation.
Empfohlen
Embedded Network Equipment
The XPC8260VVHFBC can support embedded network-equipment maintenance where an existing board expects a 166 MHz, one-core, 32-bit PowerPC G2 processor. The MPC82xx family’s communications orientation is relevant to routers, gateways, and protocol controllers that depend on established firmware. Deployment should prioritize exact board revision, processor step, memory population, and boot configuration rather than processor family name alone. If hardware is unchanged, a traceable original device generally offers lower migration risk, while any related MPC82xx candidate requires ball-map and peripheral validation.
Empfohlen
Industrial Control Systems
The XPC8260VVHFBC is appropriate for obsolete industrial-control products that were designed specifically for the MPC8260 communications-processor platform. A 32-bit PowerPC G2 core at 166 MHz can maintain legacy sequencing and communications tasks, but industrial suitability depends on temperature grade, supply availability, system response, and long-term component provenance. The verified listing identifies a commercial temperature grade, yet the precise range is unavailable. Production continuation should therefore include incoming inspection, hardware regression testing, and a controlled last-time-buy or end-of-life mitigation plan.
Empfohlen
Protocol Conversion Equipment
The XPC8260VVHFBC can be retained in protocol-conversion equipment where the installed product uses the MPC82xx architecture for simultaneous control and communications functions. Its verified 166 MHz operating point and 32-bit instruction set are useful for established protocol stacks, but migration is attractive only when new silicon provides documented lifecycle or sourcing benefits. Compare boot ROM behavior, communications peripherals, memory-controller timing, interrupt routing, and software build identifiers before substituting. An unmodified original fit is preferable when revalidation resources are limited.
Empfohlen
Communications Line Cards
The XPC8260VVHFBC is suitable for maintaining communications line cards that were originally qualified with this legacy PowerPC processor. Its single 32-bit core at 166 MHz matches the supplied MPC82xx positioning, while the 480-TBGA package already imposes demanding board-layout and inspection requirements. A like-for-like replacement decision should start with the original manufacturer part number, package revision, silicon revision, firmware release, and exposed-pad connection. Related PC826x parts should enter production only after automated boundary scan, boot testing, interface loopback, and thermal testing demonstrate equivalence.
Empfohlen
Legacy Router and Gateway Repair
The XPC8260VVHFBC is useful for repair and spare-part programs targeting legacy routers and gateways built around the MPC8260 PowerPC G2 platform. The verified 166 MHz frequency, one processing core, and 32-bit architecture provide a recognizable repair target, but procurement must control counterfeit risk because the device is obsolete and supplied through multiple marketplace channels. Require traceability, condition disclosure, date codes, visual inspection, X-ray or AOI as appropriate, and boundary-scan or functional testing before installation. Record every change in processor ordering code and board revision.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für XPC8260VVHFBC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PC8260AMTPUMB | PCX8260AMTPUMB | PC8265MTPUMC | PC8265AMTPUMC |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Architecture | PowerPC G2 | MPC82xx family | MPC82xx family | MPC82xx family | MPC82xx family |
| Pin-to-Pin Compatibility | Reference device | Listed as alternative; ball-map verification required | Listed as alternative; ball-map verification required | Listed as alternative; ball-map verification required | Listed as alternative; ball-map verification required |
Wichtigste Unterscheidungsmerkmale
- Verified exact processor identity (vs. PC8260AMTPUMB)
- Confirmed package dimensions and ball count (vs. PCX8260AMTPUMB)
- Documented communications-processor positioning (vs. PC8265MTPUMC)
Designhinweise
Do not approve a candidate solely because GlobalSpec lists it as an alternative. The supplied cross-reference names PC8260AMTPUMB, PCX8260AMTPUMB, PC8265MTPUMC, and PC8265AMTPUMC, but it does not prove identical 480-TBGA footprints or ball assignments. Before substitution, compare the exact package drawings, pin multiplexing, voltage rails, exposed-pad connections, boot interfaces, memory timing, communications peripherals, and firmware identifiers.
The verified device operates at 1.8 V, but supply-current limits, rail sequencing, decoupling, and exposed-pad power requirements are not supplied. Reconstruct the power tree from the package-specific MPC8260 hardware manual and preserve its reference layout. Validate minimum droop during processor start-up and peripheral activity, and verify every rail against the alternative’s electrical table rather than assuming that the 1.8 V core label guarantees identical power architecture.
A 480-TBGA design requires controlled escape routing, symmetrical power distribution, and assembly access for inspection. Preserve the original ball map, pin-1 orientation, via arrays, solder-mask and paste definitions, and exposed-pad geometry when making a like-for-like repair. For a true second-source design, run DRC, escape-routing, and signal-integrity reviews on the complete alternate footprint; a visually similar BGA is not proof of electrical compatibility.
Compliance-Informationen
The supplied evidence does not provide authoritative RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. GlobalSpec states that XPC8260VVHFBC is not compliant as halogen-free, but this was not treated as authoritative manufacturer evidence.
