Zilog

Z8609316VSC - 8-Bit 16MHz ROMless MCU | Zilog | Industrial Control

Teilenummer: Z8609316VSC ✓ Aktiv
44-pin PLCC Package 16 MHz Speed External ROM required Memory
MOQ: 1 |

Z8609316VSC Übersicht

The Zilog Z8609316VSC is an 8-bit ROMless Z80-family microcontroller operating at up to 16 MHz and housed in a 44-pin J-lead PLCC package. It is designed for embedded control systems that require external program and data memory, direct bus-oriented interfacing, and a compact through-hole package suitable for leaded industrial assemblies.

A ROMless microcontroller is a microprocessor-style device that does not contain embedded program memory. The system designer must provide external memory for firmware and data, making this device suitable for applications where code updates, larger memory maps, or shared external memory are useful. Within the product hierarchy, the Z8609316VSC belongs to the Zilog Z8 microcontroller family, the 8-bit microcontroller category, and the broader embedded processor and semiconductor market.

The component's key characteristics include an 8-bit CPU, ROMless architecture, 16 MHz operation, commercial temperature grade, 44 terminals, and a square 44-pin PLCC package. Its 44-pin footprint supports systems requiring more external bus signals than a small surface-mount MCU package can offer. The PLCC package also provides a practical board-level option for prototypes, legacy equipment, repair assemblies, and industrial products assembled through-hole.

The external-memory architecture separates program storage from the MCU itself and can expand the usable firmware and data capacity beyond the limits of an integrated ROM. Because the device is ROMless, a complete system also depends on suitable external address and data memory, bus timing, reset behavior, clock implementation, and correct PCB signal integrity. Designers should follow the Zilog application guidance for memory-interface timing and peripheral connections rather than assuming the behavior of an internally programmed MCU.

Typical uses include industrial controllers, embedded instrumentation, keypad and display interfaces, communication modules, legacy control equipment, and compact systems requiring an 8-bit bus architecture. The 16 MHz operating rate supports faster control loops and responsive peripheral handling, while the 44-pin PLCC package remains useful where through-hole assembly and field replacement are important. The commercial grade designation makes it most appropriate for designs specified within the manufacturer's commercial temperature limits.

The primary design consideration is system-level memory support. Validate external memory address decoding, bus timing, clock source, reset behavior, and all peripheral connections before release. Maintain signal-integrity margins on address and data buses, use suitable decoupling near the supply pins, and follow the package pin-assignment table when assigning board tracks and connector signals.

This page combines the verified component identity, package characteristics, sourcing information, replacement assessment, and engineering guidance needed to evaluate the Z8609316VSC. It also highlights where an external-memory design is appropriate and where a different microcontroller architecture may provide a more practical production solution.

Drop-in-Alternativen für Z8609316VSC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Z8609316VEG

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 44-pin PLCC
Same Z8609316 family and 44-pin PLCC footprint; temperature qualification differs from the commercial-grade Z8609316VSC.

📋 Referenzalternative (nicht im Katalog)

Z8609316VSC Grenzwerte & elektrische Eigenschaften

Microcontroller Type 8-bit ROMless microcontroller
Processor Family Z8 Z80-family microcontroller
Maximum Clock Speed 16 MHz
Program Memory External ROM required
Data Memory External memory architecture
Number of Terminals 44 terminals
Package Type 44-pin PLCC
Package Code QCCJ
Package Shape Square
Terminal Form J-bend
Montagestil Through-hole surface mount
Temperature Grade Commercial
RoHS-Status unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Z8609316VSC square Pinbelegungsleitfaden

Pinbelegung für Z8609316VSC (square-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für Z8609316VSC im square-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für Z8609316VSC.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

Z8609316VSC ist geeignet für 6 Anwendungs: Industrial Embedded Controllers, Legacy Instrumentation Systems, Communication Interface Modules, Keypad and Display Control, Power and Battery Equipment, Prototypes and Legacy Repair Boards.

🏭

Industrial Embedded Controllers

The Z8609316VSC fits industrial controller designs that require a deterministic 8-bit control platform, external firmware memory, and a 44-pin PLCC footprint. Its 16 MHz operating rate provides timing margin for polling-based control loops and peripheral handling, while the ROMless architecture allows firmware to reside in replaceable or externally managed memory. A typical implementation divides address and data buses between the controller and external memory, then connects discrete inputs and outputs through additional peripheral devices. The J-bend PLCC package is useful for through-hole industrial boards, prototypes, and repair assemblies. Because the MCU itself contains no ROM, designers must validate the full memory map, bus timing, reset behavior, and supply distribution before production release.

🔧

Legacy Instrumentation Systems

The Z8609316VSC is appropriate for legacy instrumentation where an established Z80-compatible control architecture is preferable to redesigning around a newer microcontroller. Its ROMless organization permits firmware and working data to be placed in external memory, supporting reproducible code deployment and expandable system storage. At up to 16 MHz, the processor can service measurement, display, keypad, and communication routines when the external bus and peripheral timing are properly designed. The 44-pin PLCC package supports boards using through-hole assembly and field replacement. Engineers should preserve the original external-memory interface, verify all interrupt and timer functions, and test the assembled board at the intended clock rate because bus timing and peripheral behavior remain central to reliable instrumentation operation.

🌐

Communication Interface Modules

The Z8609316VSC can serve as the controller in a communication interface module that bridges legacy peripheral buses and an external host processor. Its 8-bit architecture, 16 MHz clock rate, and external-memory design provide a practical basis for protocol handling, status monitoring, and command buffering. A ROMless implementation allows firmware to be updated or replaced without changing the MCU package, while the 44-pin PLCC footprint leaves sufficient pins for address, data, control, serial, and interrupt functions. The design must account for bus contention, signal termination, isolation requirements, and peripheral timing. Developers should use the manufacturer's interface descriptions to confirm the available peripheral functions and avoid assigning pins solely from the package count.

📺

Keypad and Display Control

The Z8609316VSC is suitable for keypad, display, and human-interface control blocks in compact embedded equipment. A 16 MHz 8-bit processor can scan inputs, maintain display state, update indicators, and supervise a host interface while program code is stored externally. The 44-pin PLCC package provides a comparatively generous pin count for external memory, display drivers, keypad scanning, and control signals. Designers can divide the system into a deterministic scanning routine and a host-command handler, then place external memory close to the controller to minimize bus delay. Firmware must be validated for debounce timing, display refresh behavior, and bus-cycle timing. The PLCC package also simplifies prototype rework and through-hole repair compared with a fine-pitch leadless controller.

⚡

Power and Battery Equipment

The Z8609316VSC can support compact power-control or battery-powered equipment when the design benefits from an established 8-bit control architecture and external firmware storage. The ROMless arrangement allows application code and parameters to reside in external memory, while the 16 MHz processor can perform supervisory functions, state sequencing, and low-rate communication tasks. The 44-pin PLCC package is suitable for leaded assemblies where serviceability and mechanical robustness are priorities. For battery applications, the complete system must account for controller operating current, clock start-up, external-memory demand, regulator dropout, and standby behavior. None of those electrical values should be inferred from the package alone; use the component documentation to establish supply limits and low-power design targets before selecting the memory and power-management circuitry.

⚡

Prototypes and Legacy Repair Boards

The Z8609316VSC is particularly useful for prototypes, proof-of-concept controllers, and repair boards that depend on the established Z8609316 architecture. Its 44-pin PLCC package permits straightforward through-hole soldering, socketed experimentation, and component-level replacement. Since the controller is ROMless, engineers can connect external memory to reproduce or modernize firmware storage without changing the CPU footprint. Bring-up should begin with a known-good clock and reset circuit, followed by memory read and write tests. Logic analysis of the address and data buses is advisable before attaching peripherals. The package's 44 terminals also provide a manageable number of connections for bench wiring, reducing routing complexity relative to a very-high-pin-count controller while preserving the legacy system architecture.

What is the Z8609316VSC?
The Z8609316VSC is a Zilog 8-bit ROMless Z80-family microcontroller rated for operation up to 16 MHz in a 44-pin PLCC package. According to the Zilog component listing, it uses an external-memory architecture, meaning the product must be paired with suitable external program and data memory. It is intended for embedded control, legacy industrial equipment, instrumentation, and compact bus-based systems that benefit from a 44-pin through-hole footprint.
What is the operating frequency of Z8609316VSC?
The Z8609316VSC operates at up to 16 MHz. According to the Zilog product identification, this is an 8-bit ROMless controller rather than a device containing an internal program ROM. The clock source, reset requirements, and external-memory timing must be implemented according to the Zilog datasheet and verified for the specific PCB. The 16 MHz rate supports responsive control-loop and peripheral-service requirements in compact embedded systems.
What package does Z8609316VSC use?
The Z8609316VSC uses a 44-pin PLCC package with J-bend terminals. The component listing identifies the package code as QCCJ and describes its shape as square. This package provides a practical through-hole assembly option for prototypes, industrial controllers, repair products, and legacy systems. Pin assignment should be taken directly from the Zilog package diagram because no complete public pin table is included on the product listing.
Where can I download the Z8609316VSC datasheet PDF?
The Z8609316VSC datasheet and product documentation are available through the linked manufacturer and distributor product resources on this page. The technical document should include the 44-pin PLCC pinout, external memory interface, clock requirements, electrical characteristics, and timing diagrams. Use the Zilog document when assigning PCB tracks or evaluating the external bus, and request a quote through the Request a Quote form for current commercial availability.
Where is the Z8609316VSC pinout located?
The Z8609316VSC pinout is located in the package pin-description and pin-connection sections of the Zilog datasheet. The component is supplied in a 44-pin PLCC package, and its package code is QCCJ. Consult that diagram before assigning address, data, control, clock, reset, power, and I/O signals. The searchable product resource on this page provides the entry point for the relevant documentation and current sourcing request.
Can Z8609316VSC replace a Z8609316VEG?
A Z8609316VEG can be considered for a board-level substitution only after its temperature grade and exact pin configuration have been compared with the Z8609316VSC. Both devices are associated with the same 44-pin PLCC Z8 controller family, but commercial versus extended-temperature suitability can change the qualification decision. Review the operating-temperature limits, clock rating, memory interface, and all peripheral assignments before treating the part as a drop-in replacement.
What is the best drop-in replacement for Z8609316VSC?
The Z8609316VEG is the closest same-brand candidate identified for the Z8609316VSC because it belongs to the same Z8609316 controller family and uses the same 44-pin PLCC format. Its temperature qualification differs from the commercial-grade Z8609316VSC, so it is most appropriate when the replacement must cover a wider temperature range. No verified cross-brand, pin-compatible replacement was identified, and software, timing, and peripheral behavior must be checked before substitution.
What can replace the Z8609316VSC in an existing design?
The Z8609316VEG can replace the Z8609316VSC when the design can use its temperature grade and the manufacturer confirms electrical and pin compatibility. Same-package appearance alone does not guarantee a functional replacement: clock limits, reset behavior, external-memory timing, interrupt functions, and peripheral assignments must also match. For production use, verify the complete Zilog datasheet and update the product's environmental qualification accordingly.
When should I choose Z8609316VSC over another 8-bit MCU?
Choose the Z8609316VSC when a design specifically benefits from a ROMless Z80-family architecture, a 16 MHz 8-bit CPU, and a 44-pin PLCC footprint. It is particularly suitable for legacy-compatible industrial controllers and systems that intentionally use external program and data memory. Choose a different MCU when internal Flash, a smaller surface-mount package, a newer peripheral set, or a documented cross-brand migration path is more important than compatibility with the established Z8609316 platform.
Is Z8609316VSC suitable for industrial control systems?
The Z8609316VSC is suitable for commercial-grade industrial control systems that operate within its specified environmental limits and use external memory. Its 16 MHz Z80-family processor, 44-pin PLCC package, and J-bend terminals support compact embedded controllers and through-hole assemblies. For deployments exposed to extended temperatures, vibration, or severe electrical conditions, review environmental ratings and consider a suitably qualified controller for those requirements.
What are the key specifications of Z8609316VSC?
The key specifications identify the Z8609316VSC as an 8-bit ROMless microcontroller with a maximum clock frequency of 16 MHz, commercial temperature grade, and 44 J-bend terminals in a square PLCC package. Its externally supplied program and data memory make board-level bus design a central implementation requirement. The package code is QCCJ, and its through-hole construction supports prototypes, industrial assemblies, and field-replacement systems.
How do I design the external memory circuit for Z8609316VSC?
Design the external memory circuit around the address, data, control, clock, and reset requirements shown in the Zilog interface documentation. Confirm the memory device's address and data width, access timing, and voltage compatibility before laying out the PCB. Keep address and data routes short, provide continuous clocking where required, and include adequate decoupling at the controller and memory devices. Prototype the bus at the intended 16 MHz operating condition.
Does the Z8609316VSC require external program memory?
Yes, the Z8609316VSC is identified as a ROMless microcontroller and therefore requires an external program-memory implementation for firmware storage. It can also use external data memory according to the system memory map. This makes the controller suitable for expandable legacy systems, but it also means the overall product must include suitable memory devices, address decoding, bus timing, and power-supply support.
What is the best Zilog equivalent for Z8609316VSC?
The Zilog Z8609316VEG is the best identified same-brand equivalent because it is a Z8609316-family device in the same 44-pin PLCC format. It offers a different temperature qualification, which can make it preferable for wider-range industrial use but unsuitable if the replacement must preserve the original commercial-grade specification exactly. No cross-brand equivalent was confirmed as both pin-compatible and parametrically equivalent, so use the Request a Quote form for the exact device and replacement assessment.
Where can I buy Z8609316VSC and check its lead time?
The Z8609316VSC can be requested through the Request a Quote form on this page for current availability, lead time, and order handling. The form is the appropriate route for an exact-match 44-pin PLCC order because package suffix, temperature grade, and assembly requirements affect procurement. Provide the target quantity and exact MPN on the form, and do not substitute a different package or temperature suffix without engineering approval.

Technische Referenzdaten für Z8609316VSC – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the Z8609316VSC when maintaining a Z8609316-based industrial or legacy design that depends on an 8-bit ROMless architecture, external program memory, a 16 MHz operating rate, and a 44-pin PLCC footprint. Its commercial-grade designation fits products that remain within the manufacturer's commercial environmental range. Select the Z8609316VEG when the same family and package are required but the design needs the broader temperature qualification. Do not choose either solely because the package drawings match: verify the complete pinout, supply limits, external-memory timing, interrupts, timers, and serial functions. For new designs without legacy constraints, a microcontroller with internal Flash, a smaller surface-mount package, and a documented migration path may reduce assembly and firmware complexity. The Z8609316VSC is most valuable when compatibility with an established bus architecture outweighs those newer-device advantages.

Vergleich mit Alternativen

Parameter Dieses Produkt Z8609316VEG
Brand Zilog Zilog
Package 44-pin PLCC 44-pin PLCC
CPU Architecture 8-bit 8-bit
Program Memory External ROM required External ROM required
Maximum Clock Speed 16 MHz 16 MHz
Temperature Grade Commercial Extended-temperature option
Number of Terminals 44 terminals 44 terminals
Terminal Form J-bend J-bend
Mounting Style Through-hole surface mount Through-hole surface mount

Wichtigste Unterscheidungsmerkmale

  • ROMless external-memory architecture (vs. Z8609316VEG)
  • Commercial-grade configuration (vs. Z8609316VEG)
  • Established 44-pin PLCC interface (vs. Z8609316VEG)

Designhinweise

Route the external address, data, and control buses with short, direct paths between the Z8609316VSC and external memory. Maintain the pin order specified by the Zilog package diagram, avoid unnecessary vias through the PLCC footprint, and place memory devices where their address and data pins face the controller. Keep clock and reset routing short, use a stable clock source, and verify the complete design with a logic analyzer during memory read, write, and interrupt cycles.

Design the supply network for the controller and all external memory devices as one system. Place the required decoupling capacitors close to the associated supply and ground pins, provide an appropriate local ground reference, and check supply sequencing during power-up and reset. The operating voltage, current consumption, and external-load requirements must be taken from the manufacturer documentation; they cannot be derived from the 8-bit architecture or 16 MHz clock rating.

Do not treat a matching 44-pin PLCC outline as sufficient proof of drop-in compatibility. Confirm pin names, power pins, clock input, reset, memory interface, interrupt signals, and peripheral assignments for the exact suffix. When replacing the commercial-grade Z8609316VSC with an extended-temperature option, verify the operating-temperature range, electrical limits, timing, and product qualification. The ROMless design also requires a valid external memory map and a complete firmware-loading strategy.

Preserve a clean separation between clock, memory, and slower peripheral signals. Use a common ground plane where appropriate, avoid routing memory buses beneath noisy switching nodes, and place termination or series damping only after evaluating the actual edge rates and topology. For a through-hole PLCC assembly, inspect solder joints for adequate wetting and check pin orientation against the package marker before applying power. Prototype timing at the intended 16 MHz operating rate.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The component is an 8-bit commercial-grade ROMless microcontroller rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or current product documentation.

Daten verifiziert am: 2026-11-17 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

Z8609316VSC datasheet Z8609316VSC pinout Z8609316VSC datasheet pdf Z8609316VSC equivalent Z8609316VSC replacement Z8609316VSC cross reference Z8609316VSC vs Z8609316VEG Z8609316VSC 44 pin PLCC Z8609316VSC 16MHz ROMless Zilog Z8609316VSC Z8609316VSC price Z8609316VSC stock

Verwandte Bauteile & Begriffe

Zilog Z8609316VSC Z8609316VEG Z8 Z80-family microcontroller 8-bit microcontroller ROMless microcontroller microcontroller embedded processor semiconductor external program memory external data memory 16 MHz clock 44-pin PLCC PLCC package family J-bend terminal QCCJ package code industrial controller embedded instrumentation communication interface keypad and display control through-hole assembly address bus data bus commercial temperature grade signal integrity
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen