Z8674312VSC - 8-Bit 12MHz OTP Microcontroller | Zilog
Teilenummer: Z8674312VSC ✗ AbgekündigtZ8674312VSC Übersicht
A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The Z8 MCU family belongs to the broader hierarchy of embedded processors, embedded controllers, and integrated circuits. It is intended for applications that require compact embedded control, event monitoring, digital input handling, and deterministic peripheral control without a separate external processor.
The Z8674312VSC combines 8,192 bytes of OTP program memory with a 12 MHz operating frequency and 32 I/O lines. OTP memory permits a programmed device to be finalized for production, while the Z8 core provides the central processing logic for embedded control sequences. Its 236 bytes of RAM provide working storage for variables, status information, and short-term data handling. The listed package provides 44 physical terminals around a square PLCC body.
As an embedded controller, the Z8 core executes firmware from program memory and uses its on-chip peripherals to interact with external circuitry. The power-on reset function supports defined initialization after supply application, while the watchdog timer helps recover operation if firmware stops servicing the timer as intended. The operating range of 0°C to 70°C identifies the target as a commercial-temperature grade rather than an automotive or extended-temperature grade.
Typical uses include industrial control panels, embedded instrumentation, simple sequencers, appliance controllers, status and alarm panels, and compact automation modules. The 32 I/O lines are useful for digital interfaces, pushbutton inputs, indicator outputs, and external control signals. Designers should verify clock timing, peripheral assignments, programming procedures, and electrical limits in the manufacturer documentation before creating a production design.
The 44-pin PLCC footprint requires careful PCB layout and a compatible socket or land pattern. Layout should preserve access to programming and test functions, provide stable supply bypassing near the device, and route sensitive timing or signal paths away from noisy switching nodes. Because the OTP program memory cannot be electrically rewritten, firmware validation must occur before the programmed configuration is finalized.
This product summary combines processor architecture, memory organization, package details, lifecycle information, and application guidance for engineers assessing an embedded-control design. It also distinguishes the exact PLCC ordering code from related package variants and focuses replacement decisions on footprint, pin compatibility, memory, clock, and thermal requirements.
Drop-in-Alternativen für Z8674312VSC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Z8674312VSG
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →Z8674312VSC Grenzwerte & elektrische Eigenschaften
| Microcontroller Type | 8-bit Z8 microcontroller |
| Maximale Taktfrequenz | 12 MHz |
| Program Memory Size | 8 KB (8K x 8) |
| Program Memory Type | OTP ROM |
| RAM Size | 236 bytes |
| Number of I/O Lines | 32 |
| Processor Core | Z8 |
| Gehäuse | 44-pin PLCC (J-lead) |
| Package Code | QCCJ |
| Package Shape | Square |
| Number of Terminals | 44 |
| Terminal Form | J-bend |
| Betriebstemperaturbereich | 0°C to 70°C (TA) |
| Temperature Grade | Commercial |
| Power-On Reset | Yes |
| Watchdog Timer | Yes |
| Montageart | Surface mount |
| Lebenszyklusstatus | Obsolete (EOL) |
Z8674312VSC square Pinbelegungsleitfaden
Pinbelegung für Z8674312VSC (square-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für Z8674312VSC.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
Z8674312VSC ist geeignet für 6 Anwendungs: Industrial Control Panel, Sequencer and Stepper Control, Embedded Instrumentation, Appliance Controller, Alarm and Status Monitor, Legacy Equipment Repair.
Industrial Control Panel
The Z8674312VSC fits a compact industrial control panel that coordinates pushbuttons, status indicators, mode commands, and discrete output signals. Its 32 I/O lines provide ample parallel digital connectivity, while the 12 MHz Z8 core executes panel logic and sequencing functions from 8 KB of OTP program memory. The 236 bytes of RAM can hold operating state, counters, and interface variables. Designers can place the controller in a 44-pin PLCC socket or compatible surface-mount land pattern and use an external driver stage for relays, lamps, or higher-current loads. The listed 0°C to 70°C commercial range suits controlled indoor equipment, but enclosure temperature, surge protection, isolation, and long-term component sourcing still require separate qualification.
Empfohlen
Sequencer and Stepper Control
The Z8674312VSC can serve as the central controller in a small sequencing system because its 8-bit Z8 core runs at up to 12 MHz and provides 32 I/O lines for position, limit, start, stop, and output-control signals. OTP program storage supports a fixed production sequence, while 236 bytes of RAM accommodates counters and current step state. A designer can map limit switches to inputs, generate timed output events, and use the watchdog timer to recover from an interrupted sequence. Because the MCU operates from a 0°C to 70°C commercial range, it is best placed in a protected enclosure. Motor and interface safety also requires transistor or driver circuits, flyback protection, and a common grounding strategy rather than direct motor loading from the controller pins.
Empfohlen
Embedded Instrumentation
The Z8674312VSC is appropriate for compact instrumentation that gathers switch states and coordinates front-panel indicators without a high-performance processor. Its 12 MHz clock rate provides useful timing headroom for debouncing, event counting, and periodic control tasks, while 8 KB of OTP program memory holds finalized acquisition and display-control routines. The 32 available I/O lines can support digital sensor interfaces, range selection, alarm outputs, and communication lines implemented with discrete circuitry. Designers should use the manufacturer documentation to confirm timer, interrupt, and serial-interface resources before fixing the architecture. The commercial temperature range is appropriate for laboratory or indoor equipment operating within 0°C to 70°C, provided that analog front-end components, calibration storage, and external communications are designed separately.
Empfohlen
Appliance Controller
The Z8674312VSC can implement the fixed control logic of a household or commercial appliance using its Z8 core, 8 KB OTP memory, and 32 digital I/O lines. Typical tasks include interpreting buttons, operating relays, sequencing pumps or valves, controlling indicators, and enforcing timing limits. OTP programming is useful for a stable appliance configuration because firmware can be tested before the production device is finalized, reducing field-update flexibility but supporting controlled manufacturing. The 236 bytes of RAM is sufficient for compact state machines and operating counters. Use an appropriate PLCC footprint or socket, bypass the supply close to the device, and protect input pins from appliance transients. For heating or motor-driven products, add independent thermal limits and appropriate isolation or driver circuitry.
Empfohlen
Alarm and Status Monitor
The Z8674312VSC supports a standalone alarm or status-monitor design by polling sensors, evaluating thresholds, operating buzzers or lamps through driver circuits, and maintaining event counts. Its 32 I/O lines allow several monitored inputs and indication outputs to share one controller, while the watchdog timer adds a recovery mechanism for firmware stalls. The 12 MHz Z8 core and 236 bytes of RAM are suitable for deterministic, compact monitoring logic programmed into 8 KB of OTP memory. Since the MCU itself has no stated network interface, remote reporting would require additional circuitry. Designers should also include latching alarm states, debounce or conditioning for sensor inputs, fail-safe output states, and a regulated supply suitable for the electrical limits listed in the manufacturer documentation.
Empfohlen
Legacy Equipment Repair
The Z8674312VSC is especially relevant when repairing a legacy Z8-based controller whose original MCU uses a 44-pin PLCC footprint and 8 KB OTP program organization. Matching the established package can preserve an existing PCB layout, connector assignments, and peripheral wiring while reducing redesign effort. The 12 MHz processor, 236 bytes of RAM, and 32 I/O lines should be checked against the original schematic, clock circuit, programming method, and memory contents before substitution. Because the device is obsolete and program memory is one-time programmable, a replacement normally requires firmware programming and a controlled OTP programming procedure. Preserve the original decoupling and layout, verify all 44 pin functions, and compare electrical limits rather than assuming that a same-family ordering code is automatically interchangeable.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für Z8674312VSC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | Z8674312VSG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 44-pin PLCC (J-lead) | 44-pin PLCC |
| Processor Core | Z8, 8-bit | Z8, 8-bit |
| Maximum Frequency | 12 MHz | 12 MHz |
| Program Memory | 8 KB (8K x 8) OTP | 8 KB OTP |
Wichtigste Unterscheidungsmerkmale
- Direct 44-pin PLCC package match (vs. Z8674312VSG)
- Confirmed Z8 processing configuration (vs. Z8674312VSG)
- Documented commercial temperature grade (vs. Z8674312VSG)
Designhinweise
Use the 44-pin J-lead PLCC footprint only after checking the package drawing and terminal numbering in the manufacturer documentation. Place the device where a socket can be removed without stressing nearby tall components, or design the PCB for the exact lead pitch and body clearance. Keep the external clock loop compact, route ground returns directly to the device ground pins, and maintain the clearance specified for high-voltage sections of the system.
Confirm the allowed supply-voltage range, input thresholds, output-drive limits, and power-consumption figures in the manufacturer datasheet before selecting regulators or pull-up networks. Place decoupling capacitance close to the supply and ground terminals, with each loop kept as small as practical. Do not infer voltage levels from the 12 MHz clock specification, and do not connect external loads to I/O pins until their absolute limits and drive behavior have been checked.
OTP program memory cannot be electrically rewritten, so validate firmware, initialization code, timing constants, and peripheral assignments before programming production units. After programming, verify the intended device configuration and test representative board functions. Do not substitute a 44-pin LQFP ordering code for the PLCC device without redesigning the PCB land pattern and checking lead assignments.
The Z8674312VSC is specified for a 0°C to 70°C ambient-temperature range, but the allowable internal operating conditions and package-dependent dissipation limits must be taken from the manufacturer documentation. Maintain airflow around densely populated controller boards, avoid placing the PLCC next to unregulated heat sources, and include temperature monitoring where long operating cycles or elevated enclosure temperatures are expected.
Compliance-Informationen
The available technical listing identifies the device as obsolete and commercial-grade but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to the stated commercial temperature grade.