Zilog

Z86E0408PEC - 8-Bit 1KB OTP Microcontroller | Zilog

Teilenummer: Z86E0408PEC ✗ Abgekündigt
18-DIP Package 8 MHz Speed 1KB (1K x 8) one-time-programmable memory Memory
MOQ: 1 |

Z86E0408PEC Übersicht

The Zilog Z86E0408PEC is an 8-bit Z8 microcontroller with 1KB of one-time-programmable program memory, 125 x 8 bits of RAM, 14 I/O pins, and an 8 MHz operating speed, packaged in an 18-DIP enclosure. Its compact architecture is intended for simple embedded-control tasks where a dedicated controller, limited program storage, and a modest peripheral set are sufficient.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, and supporting control logic on one integrated circuit. In the broader semiconductor hierarchy, the Z86E0408PEC belongs to the 8-bit microcontroller class and the Z8 family from Zilog. It is a general-purpose embedded controller rather than a dedicated analog, power, or communications component.

The principal features visible in the manufacturer documentation are 1KB of one-time-programmable memory, 125 x 8 bits of RAM, and 14 available I/O lines. The 8 MHz operating speed provides the basic execution rate for control loops, input scanning, output updating, and simple state-machine logic. One-time-programmable memory is appropriate for products whose firmware is finalized before deployment and does not need field reprogramming.

The Z8 architecture supports embedded product designs that need deterministic control, readable I/O organization, and low-complexity firmware. Because the device has only 1KB of OTP program memory, application code must be compact and carefully structured. Its 125-byte RAM limits buffered data and stack depth, so design decisions should account for call depth, variables, and any temporary state before code is committed to one-time-programmable memory.

Typical uses include appliance controls, small industrial modules, simple sensor interfaces, building-control peripherals, and compact embedded products with discrete inputs and outputs. The 18-DIP package also supports through-hole prototyping and repair-friendly assembly. Because the exact peripheral complement, supply limits, and programming interface must be confirmed in the Zilog datasheet before layout release, a new design should not infer those details from the device family name alone.

A key design practice is to validate oscillator, reset, programming, and I/O arrangements against the official pin description and application information before placing the PCB. Engineers should also reserve programming access and confirm the supported development environment. Once firmware size approaches the 1KB limit, reducing tables, nested calls, and unnecessary library code can preserve functional margin.

This product record combines the Z86E0408PEC's documented memory, I/O, speed, and package characteristics with practical guidance on code-size planning, prototyping, and procurement. It is intended to help engineers identify the correct device quickly while clearly separating confirmed specifications from parameters that require confirmation from the manufacturer documentation.

Drop-in-Alternativen für Z86E0408PEC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

Z86E0408PEC Grenzwerte & elektrische Eigenschaften

Product Type 8-bit Z8 microcontroller
Program Memory Size 1KB (1K x 8) one-time-programmable memory
RAM Size 125 x 8 bits
Number of I/O 14 I/O
CPU Architecture 8-bit
Maximum Operating Speed 8 MHz
Gehäuse 18-DIP
Package Width 0.300 in (7.62 mm)
Montageart Through-hole
Program Memory Type One-time-programmable (OTP)

Z86E0408PEC 0.300 in (7.62 mm) Pinbelegungsleitfaden

Pinbelegung für Z86E0408PEC (0.300 in (7.62 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für Z86E0408PEC im 0.300 in (7.62 mm)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für Z86E0408PEC.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

Z86E0408PEC ist geeignet für 6 Anwendungs: Compact Appliance Control, Simple Sensor Interface Module, Industrial Control Module, Building Control Peripheral, LED Status Controller, Through-Hole Embedded Prototype.

🔧

Compact Appliance Control

The Z86E0408PEC fits a compact appliance controller when the product needs a modest state machine, discrete input handling, and simple output sequencing. Its 8-bit architecture and 8 MHz operating speed can manage basic control tasks, while 14 I/O lines provide connections for switches, indicators, relays, or discrete sensors. The 1KB OTP program memory is suitable only when application code is compact and finalized before production. The 125-byte RAM also requires disciplined variable allocation and shallow call chains. Before layout release, confirm the supply limits, reset requirements, port behavior, and peripheral availability in the Zilog manufacturer documentation.

🧩

Simple Sensor Interface Module

The Z86E0408PEC can act as the controller in a small sensor-interface module that converts discrete inputs into a simple status or control output. Its 14 I/O lines allow several sensors and output indicators to share one controller, and the 8 MHz clock provides a straightforward execution base for sampling, filtering, and state updates. Because the device has only 125 x 8 bits of RAM, avoid buffering large sample sets and process values incrementally. Its 1KB OTP memory suits fixed acquisition logic rather than protocol-heavy firmware. Verify the required I/O voltage levels and timing in the manufacturer datasheet before designing the external sensor circuitry.

🏭

Industrial Control Module

The Z86E0408PEC is applicable to small industrial control modules with limited sensing and actuation requirements, such as discrete interlocks, simple counters, or status panels. Fourteen I/O lines offer enough interface density for several inputs and outputs, and the 8-bit processor supports straightforward Boolean logic and sequencing. The through-hole 18-DIP package is also convenient for prototype boards and repairable assemblies. For production equipment, confirm operating-temperature limits, electrical immunity needs, watchdog behavior, and supply tolerance against the Zilog manufacturer documentation before treating the device as a complete industrial-grade solution.

🏠

Building Control Peripheral

A building-control peripheral can use the Z86E0408PEC for simple local functions such as dry-contact monitoring, relay sequencing, or isolated status reporting. Its small program memory favors fixed configuration logic, and the 14 available I/O lines can support multiple digital inputs and outputs without adding a larger controller. OTP programming is useful when each building unit receives its final firmware during manufacturing. Designers should keep the firmware compact, reserve RAM for stack and state variables, and confirm the controller's electrical operating limits. External isolation, protection, and surge control should be designed around the application's environmental requirements rather than assumed from the MCU rating.

💡

LED Status Controller

The Z86E0408PEC can control LED indicators, counters, and small status displays in a compact product. Fourteen I/O lines allow multiple indicator outputs and button inputs, while the 8 MHz operating speed is more than adequate for straightforward blinking, sequencing, and debounce routines. The 1KB OTP program area favors a small dedicated state machine, and the 125-byte RAM supports a limited set of counters and flags rather than display buffering. Use constant-current LED circuitry and the documented output-drive limits. For a new design, verify the available timers, port drive strength, supply range, and programming workflow in the manufacturer datasheet.

📱

Through-Hole Embedded Prototype

The Z86E0408PEC is useful for educational, proof-of-concept, and repair-oriented embedded prototypes because it combines an 8-bit Z8 controller, 1KB OTP memory, 125 bytes of RAM, and 14 I/O lines in an 18-DIP package. The through-hole outline simplifies breadboard and perfboard assembly, while the modest program-memory ceiling encourages simple, observable control code. Use the official pin description when connecting the oscillator, reset, programming interface, supply, and I/O lines. Treat prototype success as a starting point rather than proof of production suitability, because the complete electrical limits, peripheral mix, and environmental ratings must be checked from the Zilog manufacturer documentation.

What are the key specifications of Z86E0408PEC that engineers should know?
The Z86E0408PEC is an 8-bit Zilog Z8 microcontroller with 1KB of one-time-programmable program memory, 125 x 8 bits of RAM, 14 I/O pins, and an 8 MHz operating speed. It is supplied in an 18-DIP through-hole package measuring 0.300 inches, or 7.62 mm, in width. According to the Zilog manufacturer datasheet, these characteristics position the device for compact embedded-control products with modest firmware, limited volatile memory, and discrete digital interfaces.
What is the operating speed of Z86E0408PEC?
The Z86E0408PEC operates at up to 8 MHz. According to the Zilog manufacturer datasheet, this clock rate supports the device's 8-bit embedded-control architecture without implying the execution performance of a modern 32-bit or 64-bit processor. Product designers should use the documented clock, reset, and oscillator configuration when calculating instruction timing, delay loops, communication periods, and control-loop intervals.
How much program memory and RAM does Z86E0408PEC have?
The Z86E0408PEC contains 1KB of one-time-programmable program memory and 125 x 8 bits of RAM. According to the Zilog manufacturer datasheet, the OTP array is intended for firmware that is finalized before deployment rather than repeatedly updated in the field. The limited RAM also requires careful control of stack depth, buffered variables, and temporary calculations.
Where can I download the Z86E0408PEC datasheet PDF?
The Z86E0408PEC datasheet PDF can be accessed through the linked documentation page for the Z86E0408PEC, while the Zilog manufacturer datasheet remains the authoritative source for pin assignments, electrical limits, and device operation. Before schematic or PCB release, use the pin-description table and application information to confirm oscillator connections, reset behavior, programming access, and every I/O assignment.
Where can I find the Z86E0408PEC pinout?
The Z86E0408PEC pinout is defined by the Zilog manufacturer datasheet and its package documentation. The device uses an 18-DIP outline, but the verified product record does not include individual pin names, so no pin assignments should be inferred here. Open the manufacturer documentation and map all 18 positions before assigning oscillator, reset, programming, supply, ground, and I/O connections.
What can replace Z86E0408PEC?
A drop-in replacement for the Z86E0408PEC must match the 18-DIP footprint, pin functions, 1KB OTP program memory, 125 x 8 bits of RAM, 14 I/O pins, and 8 MHz operating-speed class. No manufacturer-specific or cross-brand candidate with documented pin compatibility was confirmed for this record. Treat functionally similar 8-bit microcontrollers as redesign candidates until their pinouts, memory organization, interrupt vectors, and programming requirements have been checked.
Is Z86E0408PEC the same as another 18-DIP 8-bit microcontroller?
No interchangeable substitute should be assumed merely because another device is an 8-bit microcontroller in an 18-DIP package. The Z86E0408PEC is specifically identified as a Zilog Z8 device with 1KB OTP memory, 125 x 8 bits of RAM, 14 I/O pins, and an 8 MHz operating speed. A valid replacement requires equivalence in pinout, voltage requirements, timing, memory map, peripherals, interrupt behavior, and programming method.
When should I choose Z86E0408PEC over another 8-bit microcontroller?
Choose the Z86E0408PEC when an established compact Z8 design benefits from 1KB of OTP program memory, 125 x 8 bits of RAM, 14 I/O pins, an 8 MHz operating speed, and an 18-DIP footprint. Select a modern alternative when the application needs more flash, RAM, peripherals, communications, or field-updatable firmware. The OTP architecture is strongest when final firmware can be programmed once during manufacturing.
Is Z86E0408PEC suitable for a small appliance controller?
The Z86E0408PEC can suit a small appliance controller when the required firmware fits within 1KB of OTP memory, working state fits within 125 bytes of RAM, and 14 I/O lines meet the interface count. According to the Zilog manufacturer datasheet, its 8 MHz speed supports basic control logic. Confirm supply voltage, reset behavior, peripheral availability, and start-up timing before approving the design.
Where can I buy Z86E0408PEC online?
Use the Request a Quote form on this page to request Z86E0408PEC availability, current lead time, minimum order quantity, and order confirmation for the 18-DIP device. Because one-time-programmable parts can become difficult to source after an original-programming cycle, state whether the required firmware is final and whether approved programming is needed. XAIPART will confirm the commercial details against the requested part number.
What is the price of Z86E0408PEC?
Current Z86E0408PEC pricing is handled through the Request a Quote form on this page. The submitted part number includes the Zilog manufacturer suffix identifying the 18-DIP package and ordering configuration, so the quote should be tied to Z86E0408PEC rather than a generic Z8 family device. Request quantity, programming status, target date, and shipment destination with the inquiry for an accurate response.
What is the lead time for Z86E0408PEC?
The current Z86E0408PEC lead time should be confirmed through the Request a Quote form on this page. State the required quantity, whether chips must arrive unprogrammed, and whether the programming data will be supplied separately. A legacy OTP microcontroller can have availability constraints, so procurement should begin with the exact suffix and a production schedule rather than relying on a generic family lead time.
Is Z86E0408PEC in stock?
Current Z86E0408PEC inventory is confirmed through the Request a Quote form on this page rather than assumed from an online catalog. Include the required order quantity and any programming or traceability requirements in the request. For a one-time-programmable device, distinguish new unprogrammed stock from previously programmed material because the latter may not be suitable for the intended firmware.
What programming tools are compatible with Z86E0408PEC?
The exact programming tool and software release for the Z86E0408PEC must be confirmed in the Zilog manufacturer documentation. Because the controller has 1KB of one-time-programmable memory, the chosen toolchain must support its Z8 architecture, OTP programming method, and required device identification. Confirm the approved programmer, programming voltage, timing, and development environment before committing production samples.
What design limitations should I check before using Z86E0408PEC?
The principal design limitations are the 1KB OTP program memory, 125 x 8 bits of RAM, 14 I/O pins, and the absence of a practical field-update path after programming. Engineers should minimize code size, constrain call depth, reserve enough RAM for the stack, and avoid designs expecting large buffers or complex protocols. Confirm electrical limits and the complete peripheral set in the Zilog manufacturer datasheet.

Technische Referenzdaten für Z86E0408PEC – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the Z86E0408PEC for a compact, fixed-function embedded product when 1KB of OTP program memory, 125 bytes of RAM, 14 I/O lines, and an 8 MHz clock are sufficient. Its 18-DIP package is especially convenient for through-hole prototypes and applications where a small controller must implement simple sequencing, monitoring, or output control. Select a modern flash-memory microcontroller when firmware must be updated after deployment, when the application needs more RAM, more I/O, faster execution, or richer peripherals. A legacy Z8 device may also suit maintenance of an existing design whose programming, timing, and pin behavior must remain unchanged. Before selecting a substitute, verify the complete pinout, voltage range, oscillator arrangement, memory map, interrupt system, peripheral set, and programming workflow rather than comparing clock speed alone.

Vergleich mit Alternativen

Parameter Dieses Produkt
Package 18-DIP
Brand Zilog
Product Type 8-bit Z8 microcontroller
Program Memory 1KB (1K x 8) OTP
RAM Size 125 x 8 bits
Number of I/O 14 I/O
Operating Speed 8 MHz
CPU Architecture 8-bit
Package Width 0.300 in (7.62 mm)

Wichtigste Unterscheidungsmerkmale

  • Compact fixed-function control platform (vs. No qualified drop-in alternative)
  • One-time-programmable production architecture (vs. Field-programmable 8-bit microcontrollers)
  • Through-hole assembly compatibility (vs. Surface-mount 8-bit microcontrollers)

Designhinweise

Plan for the one-time-programmable architecture before writing firmware. Finalize the code, device configuration, and production programming sequence before parts are programmed, because changing the 1KB OTP program after programming is generally not possible. Keep source under version control, test the exact build on engineering samples, and include programming support in the manufacturing plan.

Use the official Zilog pin-description table when assigning oscillator, reset, programming, supply, ground, and I/O functions. In an 18-DIP layout, preserve adequate clearance around programming-access points and confirm whether any interface pins are shared or restricted. The current record does not contain individual pin names, so PCB connectivity should not be finalized until those assignments are checked against the manufacturer datasheet.

Check the documented operating-voltage range, supply current, and I/O injection limits before adding sensors, relays, or indicator drivers. The 8 MHz operating speed identifies processor capability but does not define the permitted supply voltage. Provide local decoupling according to the manufacturer application guidance and give inductive or high-current loads their own driver circuitry rather than loading MCU output pins directly.

Treat the 125 x 8 bits of RAM as a hard design constraint. Avoid deep recursive calls, large local arrays, buffered communication frames, and simultaneous sampling of multiple data streams. Profile stack and data usage with the final compiler configuration, then retain margin because interrupt entry, library calls, and peripheral state can increase memory consumption beyond the main application's apparent requirement.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status was not identified in the manufacturer or catalog information for this exact MPN.

Daten verifiziert am: 2026-11-11 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

Z86E0408PEC datasheet Z86E0408PEC pinout Z86E0408PEC datasheet pdf Z86E0408PEC specifications Z86E0408PEC equivalent Z86E0408PEC replacement Z86E0408PEC cross reference Z86E0408PEC 18-DIP pinout Z86E0408PEC programming tool Zilog Z86E0408PEC price

Verwandte Bauteile & Begriffe

Zilog Z86E0408PEC Z8 architecture 8-bit microcontroller embedded controller microcontroller semiconductor one-time-programmable memory OTP program memory RAM 14 I/O pins 8 MHz clock 18-DIP package through-hole technology Z86E0408PEC application circuit programming interface industrial control sensor interface compact appliance control
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen