Circuitos integrados

PIC17C762-33E/L

PIC17C762-33E/L - 8-bit 33MHz MCU, 16KB OTP, 84-PLCC | Microchip

The Microchip Technology PIC17C762-33E/L is a high-performance 8-bit CMOS OTP-based microcontroller from the PIC® 17C family, featuring a 33 MHz maximum clock speed with 121 ns single-cycle instruction execution (8.25 MIPS), 16 KB (8K × 16) of One-Time Programmable program memory, and 678 bytes of RAM. Housed in an 84-pin PLCC (Plastic Leaded Chip Carrier, J-Lead) package measuring 29.31 × 29.31 mm, this device also integrates a 16-channel, 10-bit Analog-to-Digital Converter (ADC) and supports up to 50 I/O ports across the operating voltage range of 4.5 V to 5.5 V. The device is specified for the extended industrial temperature range of −40 °C to +125 °C, making it suitable for harsh-environment embedded designs. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable I/O peripherals. The PIC® 17C family sits above the PIC16 family in Microchip's 8-bit hierarchy, offering expanded memory, higher throughput, and integrated analog peripherals aimed at complex embedded-control applications. Within the broader taxonomy, PIC17C762 belongs to: microcontroller → embedded controller → integrated circuit → semiconductor. Its Harvard architecture separates program and data buses, and its 58 single-word instruction set enables compact code generation while retaining deterministic timing. Key features that differentiate this part include its 16-channel 10-bit ADC (sufficient for sensor-array multiplexing), 33 MHz operation yielding 8.25 MIPS throughput, 50 programmable I/O lines, and an OTP program memory that allows factory or prototype programming without requiring in-system re-programmability. The 84-PLCC J-Lead package provides a socket-compatible footprint well suited to industrial control boards and legacy automotive subsystems. Typical applications include industrial automation controllers, automotive body and chassis modules, consumer-electronics motor control, and embedded instrumentation. The device is documented by the manufacturer as a mature OTP part with a recommended successor being the PIC18F8520, indicating that engineers designing new products should evaluate the flash-based PIC18 family. For maintenance of existing designs the PIC17C762-33E/L remains a recognized long-life-cycle component with verified distributor stock as of 2026-09-26. When designing with the PIC17C762-33E/L, ensure the supply rail stays within 4.5 V to 5.5 V and that decoupling capacitors are placed within 5 mm of each power pin. Because OTP memory cannot be rewritten, plan for prototype validation in a windowed (JW) or emulator variant before committing to OTP parts for production. This page synthesizes distributor pricing tiers, drop-in compatible Microchip PIC® 17C alternatives, and practical design notes that complement (but do not duplicate) the manufacturer datasheet. Source references to DigiKey, Mouser, Octopart, and Microchip product pages are provided in the data_sources section.

Cotización Contacto

PIC17C762-33E/PT

PIC17C762-33E/PT - 33MHz 8-bit OTP MCU, 16KB EPROM, 80-TQFP | Microchip

The Microchip Technology PIC17C762-33E/PT is a high-performance 8-bit CMOS OTP-based RISC microcontroller belonging to the PIC® 17C family, delivering 8.25 MIPS at a 33 MHz clock with a 121 nanosecond instruction execution time. It integrates 16 KB (8K x 16) of One-Time-Programmable EPROM program memory, executes from a single 58-instruction set, and is housed in an 80-pin TQFP (Thin Quad Flat Pack, gull-wing) surface-mount package. The device operates from a 4.5 V to 5.5 V single supply, with up to 50 digital I/O lines and an internal 10-bit analog-to-digital converter. The 'E' suffix denotes the Extended (Automotive) temperature grade of -40 °C to +125 °C, and the 'PT' suffix identifies the TQFP package and Tray shipping carrier. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and configurable peripherals. The PIC17C family occupies a high-end position in Microchip's classic 8-bit PICmicro® hierarchy, sitting between the PIC16 mid-range family and the PIC18 enhanced family. RISC (Reduced Instruction Set Computer) architecture means the 17C762 executes most instructions in a single instruction cycle, and the OTP program memory lets manufacturers program each unit once at production time, which is typical for volume automotive and industrial control modules. Key differentiating features include the 58 single-word instruction set (with only program branches and table reads/writes being two-cycle), 50 bidirectional I/O ports, an internal 10-bit A/D converter, multiple timer/counter modules, and a 16-bit internal data path that enables fast arithmetic. The TQFP-80 package provides ample pin count for parallel buses, external memory expansion, and abundant analog/digital mixed-signal interfacing in a slim 12 mm x 12 mm outline suitable for space-constrained PCB layouts. Typical applications include automotive body and chassis controllers, industrial automation modules, embedded control boards that require moderate program memory with deterministic interrupt latency, and legacy designs transitioning from older 8-bit PIC architectures. Designers working on new projects should evaluate the PIC18F8520, which Microchip designates as the recommended migration path for the PIC17C762. When designing with this MCU, allocate the program EPROM budget at 16 KB maximum, ensure oscillator stability with proper crystal loading capacitors, and use the In-Circuit Serial Programming (ICSP) interface for production programming since the OTP memory cannot be reprogrammed in the field.

Cotización Contacto

PIC17C762-33I/PT

PIC17C762-33I/PT - 8-bit OTP MCU, 33MHz, 16KB EPROM | Microchip

The Microchip PIC17C762-33I/PT is a high-performance 8-bit CMOS EPROM-based microcontroller with 16KB of on-chip OTP program memory and 678 bytes of RAM, housed in an 80-pin TQFP (12x12 mm) surface-mount package. The device executes instructions in a 121 ns single cycle at 33 MHz, delivering up to 8.25 MIPS throughput, and uses a 16-bit modified Harvard architecture with an 8-bit data path. What is a PIC17C-series microcontroller? The PIC17C family is Microchip's original high-end 8-bit MCU line, built around a 16-bit instruction word and 8-bit data bus. It sits in the hierarchy: microcontroller -> embedded controller -> semiconductor IC. The 'C' suffix denotes EPROM (one-time-programmable) program memory, which was later superseded by Flash-based PIC18F equivalents. PIC17C parts include a hardware multiply engine, multi-source interrupt controller, and 10-bit ADC peripherals, positioning them between classic PIC16 mid-range MCUs and the later 16-bit PIC24/dsPIC families. Key features of the PIC17C762-33I/PT include 50 digital I/O pins arranged across multiple ports, a 10-bit successive-approximation analog-to-digital converter with multiple input channels, two CCP (Capture/Compare/PWM) modules, a USART port, an SSP (Synchronous Serial Port), and a watchdog timer. The supply voltage range is 4.5 V to 5.5 V, and the operating temperature range is -40 C to +85 C (industrial grade, indicated by the 'I' suffix). The architecture combines a single-cycle hardware multiplier, an eight-level hardware stack, and a 16-level deep software stack, enabling efficient C compiler code generation. The PIC17C762 supports both external and internal program memory modes, with the OTP array providing one-time field programmability for production code. The device also integrates a power-on reset, brown-out reset, and low-voltage detection circuit. Typical applications for the PIC17C762-33I/PT include industrial process control, motor control (BLDC and stepper), instrumentation front-ends requiring 10-bit ADC, HVAC controls, and embedded control boards where OTP-based program memory provides cost advantages over Flash parts. The wide digital I/O count (50 pins) supports keypad scanning, LCD driving, and parallel bus peripherals. When designing with the PIC17C762, note that OTP memory cannot be reprogrammed - production programming must be done at the final stage, and any code bug requires a new device. Engineers should also verify the 33 MHz clock input stability, as the 121 ns instruction cycle is the critical timing parameter. This page synthesizes Microchip PIC17C762 datasheet parameters, cross-reference alternatives, industrial-grade operating constraints, and practical OTP-programming design notes - information not consolidated on the manufacturer product page alone.

Cotización Contacto

PIC17C762T-16/L

PIC17C762T-16/L - 16MHz 8-bit OTP MCU 84-PLCC | Microchip

The Microchip Technology PIC17C762T-16/L is an 8-bit CMOS RISC microcontroller featuring 16KB (8K x 16) of OTP program memory, a 16MHz maximum operating frequency, and 50 I/O ports housed in an 84-pin Plastic Leaded Chip Carrier (PLCC) package measuring 29.31 x 29.31 mm with J-lead terminations. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory, and peripheral I/O into one package. The PIC17C762T-16/L belongs to the OTP (One-Time-Programmable) MCU family within the broader PIC17C high-performance series, which itself sits in the hierarchy: PIC17C family -> PIC16/17 architecture -> 8-bit RISC microcontroller -> MCU -> semiconductor device. The PIC17C architecture was engineered for high-throughput embedded control and executes most instructions in a single 121 ns cycle (excluding branches), delivering roughly 8.25 MIPS at 16 MHz. Key specifications include a 58-instruction RISC set, hardware multiply, a 4.5 V to 5.5 V single-supply operating range, 16 KB on-chip OTP program memory, 50 digital I/O lines, and a commercial temperature grade of 0C to +70C. The 84-PLCC surface-mount package exposes a generous pin count for I/O expansion and legacy socket compatibility. Its 16 MHz clock speed makes it suitable for control loops and human-machine interface (HMI) tasks in cost-sensitive designs. Engineered around Microchip's classic Harvard RISC pipeline, the PIC17C762T-16/L uses a separate program and data path to sustain single-cycle throughput. The integrated peripheral set (timers, USART, PWM, ADC) is well matched to motor control and instrumentation; the 33 MHz upper-clocked sibling (PIC17C762-33/L) shares the same pinout and memory map, easing lifecycle migration. Typical applications include industrial automation controllers, consumer-electronics HMI panels, and medical-device front-end boards, where the 84-pin PLCC footprint provides ample I/O for keypads, displays, and sensor interfaces. Designers often use it as a stepping stone before migrating to the pin-compatible flash-based PIC18F8520 suggested by Microchip for new designs. When laying out the PCB, place 0.1 uF decoupling Vdd/Vss pairs as close to the package as possible to suppress the 16 MHz digital noise. Because the device is OTP, firmware must be fully validated before programming; consider the flash-based PIC18F8520 for prototypes that need iteration. This page synthesizes distributor stock data (DigiKey, Heisener, Veswin), parametric comparisons with the 33 MHz variant and the recommended migration part PIC18F8520, and drop-in compatibility notes that are not consolidated in any single manufacturer document.

Cotización Contacto

PIC17C762T-16E/PT

PIC17C762T-16E/PT - 8-Bit 16MHz OTP MCU 16KB | Microchip

The Microchip Technology PIC17C762T-16E/PT is a high-performance 8-bit CMOS EPROM microcontroller from the PIC17C family, operating at up to 16 MHz and delivering 16 KB (8K x 16) of One-Time Programmable (OTP) program memory in a surface-mount 80-pin TQFP (12x12 mm) package. The device provides 678 bytes of general-purpose RAM and exposes 66 digital I/O pins, making it one of the highest-pin-count members of the legacy PIC17C family. The 'E' suffix denotes the extended industrial temperature grade of -40C to +125C, while the 'T' indicates tape-and-reel packaging for high-volume SMT production lines. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (ROM/EPROM/Flash/OTP), data RAM, and a configurable set of peripheral blocks into one package. The PIC architecture is a Harvard RISC design, which separates program and data buses so the CPU can fetch instructions in parallel with operand reads - this is the main reason a single-cycle PIC instruction can outperform a multi-cycle 8051 instruction at the same clock rate. PIC microcontrollers sit within the broader hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features of the PIC17C762T-16E/PT include a 10-bit successive-approximation analog-to-digital converter (ADC), multiple 16-bit timer/counters with capture/compare/PWM capability, a USART serial port, and an enhanced instruction set with hardware multiply. The 16 MHz oscillator drives a four-clock-per-instruction core, yielding roughly 4 MIPS of sustained throughput. The OTP program memory is one-time-programmable - ideal for low-to-medium-volume production runs that need ROM-grade security without NRE mask charges. Typical applications for the PIC17C762T-16E/PT include industrial automation controllers, automotive body and chassis ECUs (within the extended temperature range), HVAC control boards, motor-drive supervisory MCUs, and instrumentation front-ends that need a generous I/O count plus on-chip ADC. The 80-pin TQFP footprint also makes it suitable for legacy designs that require form-factor-compatible migration from other PIC17C7xx variants. When migrating code, the OTP memory must be programmed before soldering; the part cannot be field-upgraded like a Flash MCU.

Cotización Contacto

PIC17C762T-16I/L

PIC17C762T-16I/L - 16MHz 8-bit EPROM MCU, 16KB OTP, 10-bit ADC | Microchip

The Microchip Technology PIC17C762T-16I/L is a high-performance 8-bit CMOS EPROM microcontroller with 16KB (8K x 16) of OTP program memory, 678 bytes of RAM, and an integrated 10-bit analog-to-digital converter, housed in an 84-pin PLCC package (29.31 x 29.31 mm) with J-leads for surface mounting. An EPROM-based microcontroller is a programmable single-chip computer whose program memory uses Erasable Programmable Read-Only Memory that can be erased by UV exposure and re-programmed, supporting prototype and pre-production development before mask-ROM commit. The PIC17C family sits in the broader taxonomy 8-bit MCU -> microcontroller -> embedded processor -> semiconductor, designed for applications requiring high I/O count and integrated analog. The PIC17C762T-16I/L delivers 16MHz maximum clock input yielding a 121 ns instruction cycle, with all instructions single-cycle except program branches and table reads/writes (two-cycle). The RISC architecture provides 58 single-word instructions, an 8-bit x 8 single-cycle hardware multiplier, and a 16-level deep hardware stack for fast interrupt response. It supports up to 50 digital I/O lines plus a 16-channel 10-bit ADC for sensor and mixed-signal acquisition. The CMOS process technology keeps operating current low while supporting a 4.5V to 5.5V supply. Industrial temperature grade -40C to +85C enables deployment in harsh environments. The 84-PLCC J-lead package supports standard surface-mount assembly with through-hole-like mechanical robustness, easing rework and prototyping. Typical applications include industrial automation controllers, motor control front-ends, consumer electronics with analog sensing, embedded data acquisition systems, and instrumentation requiring 10-bit measurement accuracy. The wide I/O count and integrated ADC simplify BOM in mixed-signal designs. When designing, allocate the upper address range for GPR and the lower range for SFR, follow Microchip PIC17C programming specs for EPROM erase windows (windowed package variants), and budget ADC acquisition time against instruction cycles. The 'T' suffix denotes tape-and-reel packaging and 'I' denotes industrial temperature grade. This page synthesizes distributor pricing, drop-in PIC17C762 alternatives, and practical design notes from the Microchip datasheet that engineering teams will not find aggregated on a single vendor page.

Cotización Contacto

PIC17C762T-33/L

PIC17C762T-33/L - 8-Bit 33MHz OTP MCU, 16KB EPROM, 84-PLCC | Microchip

The Microchip Technology PIC17C762T-33/L is a high-performance 8-bit CMOS EPROM microcontroller with 16KB (8K x 16) of One-Time Programmable program memory, a 10-bit analog-to-digital converter, and a 33 MHz maximum operating frequency. It is housed in an 84-pin Plastic Leaded Chip Carrier (PLCC, J-Lead) package rated for the commercial temperature range (0C to +70C). The device targets embedded control applications that require deterministic execution and integrated analog peripherals in a moderate-density package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (ROM/EPROM/Flash), data RAM, I/O, and peripherals on one die. PIC microcontrollers use a RISC Harvard architecture with a single accumulator (WREG) and a small fixed instruction set; the PIC17C family extends this with 16-bit-wide program memory, 58 single-word instructions, and 121 ns single-cycle execution (except program branches and table reads/writes which take two cycles). It belongs to the hierarchy: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. Key features include a 10-bit A/D converter with up to 16 analog input channels, 50 digital I/O lines, an external interrupt controller, multiple timer/counter modules, a synchronous serial port (SSP) for SPI/I2C, and a USART for asynchronous serial communication. The on-chip EPROM enables prototype and low-volume production programming via standard EPROM programmers, with the 'T' suffix indicating tape-and-reel packaging for SMT assembly. The PIC17C762 uses an enhanced Harvard architecture with separate program and data buses, an 8-level hardware stack, and interrupt-driven I/O. The 33 MHz clock yields a 121 ns instruction cycle, supporting deterministic real-time control loops. Internal peripherals are mapped into the data memory space and accessed via banked register addressing. Typical applications include industrial automation controllers, motor control front-ends, instrumentation front-ends, automotive body controllers, smart sensor hubs, and embedded systems requiring integrated 10-bit ADC and parallel I/O with EPROM-based firmware storage. The wide operating voltage range of 4.5V to 5.5V supports TTL-compatible logic interfaces. When designing with this device, ensure the oscillator start-up time and PLL configuration are matched to the crystal specification; inadequate PCB decoupling can couple digital switching noise into the analog input pins and degrade A/D conversion accuracy. Always use the latest PIC17C762 errata sheet during firmware development to identify any silicon revisions affecting peripheral behavior. This page synthesizes distributor pricing, drop-in PIC17C762 family alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers an integrated view for sourcing and design-in decisions.

Cotización Contacto

PIC17C762T-33/PT

PIC17C762T-33/PT - 33MHz 8-Bit OTP MCU with 10-bit ADC | Microchip

The Microchip PIC17C762T-33/PT is a high-performance 8-bit CMOS EPROM-based microcontroller with integrated 10-bit A/D converter, 16KB of OTP program memory, 678 bytes of data RAM, and 66 I/O lines, housed in an 80-pin TQFP (PT) package. It executes instructions at 121 ns per cycle from a 33 MHz clock input, includes a single-cycle hardware multiplier, and supports 50 I/O ports in an extended variant (LCC-68). What is a PIC17C microcontroller? The PIC17C family represents Microchip's high-end 8-bit RISC microcontroller line, sitting above the PIC16F/PIC16C mid-range family in performance and peripheral integration. PIC17C devices offer a RISC Harvard architecture, multi-source interrupt controller, and 16-bit instruction word width, targeting embedded applications that need more processing headroom than the PIC16 family but pre-date the PIC18 introduction. Key features of the PIC17C762T-33/PT include 33 MHz maximum operating frequency yielding 121 ns instruction cycle, 8-bit data bus with 16-bit instruction path, integrated 10-bit successive-approximation A/D converter, dual-capture/compare/PWM modules, USART with addressing capability, 8-level hardware stack, and 16 interrupt sources. The OTP EPROM program memory supports one-time field programming for production volumes with reduced cost vs. windowed CERDIP variants. The PIC17C762 architecture uses a Harvard RISC design with separate program and data buses, enabling single-cycle instruction fetch and execution except for program branches and table reads/writes which are two-cycle. The integrated 10-bit A/D converter multiplexes across multiple channels for sensor monitoring, while the PWM and capture modules support motor control and timing-critical applications. Typical applications include industrial motor control, HVAC systems, automotive body controllers, uninterruptible power supply (UPS) controllers, and instrumentation requiring high pin-count with integrated ADC. The 33 MHz throughput allows software implementation of complex control loops that would otherwise require an external DSP. When designing with this OTP part, plan code carefully before programming as OTP cannot be erased and re-programmed. For development, use a windowed UV-erasable CERDIP variant (e.g., PIC17C762-33/L) on the same PCB layout with the same TQFP-80 footprint. Verify A/D reference voltage decoupling and ensure VDD/VSS pairing follows the datasheet layout guide. This page synthesizes current distributor pricing, drop-in alternatives, and practical OTP design notes not found in the bare manufacturer datasheet, accelerating BOM decisions for production engineers.

Cotización Contacto

PIC17C762T-33I/L

PIC17C762T-33I/L - 33MHz 8-bit OTP MCU, 16KB EPROM, 10-bit ADC | Microchip

The Microchip Technology PIC17C762T-33I/L is a high-performance 8-bit CMOS EPROM microcontroller in the PIC17C family, integrating 16KB (8K x 16) of One-Time-Programmable (OTP) program memory, 678 bytes of data RAM, a 10-bit analog-to-digital converter, and 50 digital I/O pins in a surface-mount 84-pin PLCC package (29.31 x 29.31 mm). An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory, data RAM, and peripherals on one die. Within the PIC taxonomy, the PIC17C family sits in the high-performance tier between the mid-range PIC16C/PIC16F devices and the enhanced PIC18F family, offering a 16-bit-wide instruction word, an 8-bit hardware multiplier, and an instruction cycle as short as 121 ns at the maximum 33 MHz oscillator rate. These characteristics place PIC17C parts in the hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> PIC family -> PIC17C sub-family -> CMOS EPROM/OTP variants. Key features of the PIC17C762T-33I/L include a single-cycle 121 ns instruction execution (except for program branches and table reads/writes which are two-cycle), an 8-bit single-cycle hardware multiplier, 50 I/O ports, and a wide operating voltage of 4.5 V to 5.5 V. The 'T' suffix in the part number indicates tape-and-reel packaging, the '33' indicates a 33 MHz maximum clock input, the 'I' indicates an industrial temperature grade of -40 C to +85 C, and '/L' indicates the 84-pin PLCC package. The 'C' between PIC17 and 762 indicates the EPROM/OTP program-memory variant, distinguishing it from later ROMless (PIC17C76x) and flash (PIC17C7xx) revisions. The PIC17C762T-33I/L's RISC-style Harvard architecture isolates the program-memory bus from the data-memory bus, allowing instruction fetch and operand access to occur on the same cycle. The integrated 10-bit ADC with multiple input channels removes the need for an external converter in many sensor-interface designs, while the high pin count (66 I/O per the Mouser listing, 50 per other sources - see _validation_note) supports complex human-machine interface or parallel-bus applications. The OTP memory variant suits prototyping and pre-production builds where one-time programming is acceptable and the larger flash-based PIC18F family is not yet qualified. Typical applications for the PIC17C762T-33I/L include industrial control systems, motor drive front-ends, automotive body and chassis ECUs, data-acquisition front-ends, and consumer-electronics controllers. The combination of 50+ I/O lines, 10-bit ADC, and 121 ns instruction throughput makes the device attractive for legacy 8-bit designs that need deterministic timing without migrating to a 16-bit dsPIC. When designing with this device, note that the PIC17C family is in NRND/EOL status at Microchip and should be considered a long-term-availability part rather than a new-design choice. For new designs, Microchip recommends the PIC18F family or dsPIC33 family as functional replacements that share development-tool chains (MPLAB X IDE, MPLAB ICD programmers) but require PCB respin due to differing pinout and peripheral sets. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC17C762T-33I/PT

PIC17C762T-33I/PT - 33 MHz 8-bit EPROM MCU, 16KB, 80-TQFP

The Microchip Technology PIC17C762T-33I/PT is a high-performance 8-bit CMOS EPROM microcontroller from the PIC17C family, delivering 33 MHz clock input with a 121 ns single-cycle instruction cycle (except for program branches and table reads/writes which are two-cycle), integrating 16KB (8K x 16) of one-time-programmable (OTP) EPROM program memory in an 80-pin TQFP package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, RAM, peripherals, and I/O on one die, executing instructions on 8-bit data words. PIC microcontrollers are RISC (Reduced Instruction Set Computer) devices, using only 58 single-word instructions that are mostly single-cycle, with a built-in single-cycle hardware multiplier. PIC microcontrollers sit within the broader taxonomy of microcontroller -> embedded processor -> semiconductor -> integrated circuit, and are widely used in industrial control, automotive body electronics, and consumer appliances. Key features of the PIC17C762T-33I/PT include 16KB OTP EPROM (8K x 16), 50 digital I/O pins, an on-chip 10-bit analog-to-digital converter (A/D), a single-cycle 8x8 hardware multiplier, and a 5V (4.5V to 5.5V) supply range. The 'T' suffix indicates tape-and-reel packaging, while 'I' denotes industrial temperature grade (-40C to +85C). The 80-pin TQFP footprint provides ample I/O for human-machine interface and motor-control subsystems. Architecturally, the PIC17C762 uses a Harvard architecture with separate program and data buses, a 16-bit-wide program memory bus to fetch one instruction per cycle, and an 8-bit data path. The 121 ns instruction cycle at 33 MHz oscillator input provides roughly 8.26 MIPS throughput, enabling real-time PID control loops and high-speed serial communication. The integrated 10-bit A/D samples analog signals from sensors, while 50 I/O lines drive displays, keypads, and actuators. Typical applications for the PIC17C762T-33I/PT include industrial automation controllers, HVAC blower and damper controls, uninterruptible power supply (UPS) monitors, motor control front-ends, and consumer appliance main boards. Its combination of OTP program memory, wide I/O count, and integrated A/D makes it especially suited to cost-sensitive embedded products that require on-chip analog measurement. When designing with this part, pay close attention to the EPROM (OTP) memory window: code is one-time-programmable and cannot be erased, so development must use the PIC17C762-33I/PT (windowed CERDIP) or PIC17C762T-33/L (UV-erase PLCC) variants for prototyping. Provide adequate decoupling (0.1 uF ceramic near each VDD pin) and ensure MCLR is properly tied high through a 10 kohm resistor for normal operation. This page synthesizes distributor stock levels, parametric drop-in alternatives in the same 80-TQFP footprint, and practical design notes that are not compiled in the manufacturer datasheet, providing engineers and procurement teams a faster route from search to part selection.

Cotización Contacto

PIC17C766-16/L

PIC17C766-16/L - 8-Bit 16MHz OTP MCU 32KB 84-PLCC | Microchip

The Microchip Technology PIC17C766-16/L is a high-performance 8-bit CMOS EPROM microcontroller running at 16 MHz instruction-clock input with an 8.25 MIPS throughput (121 ns single-cycle instruction time) in an 84-pin PLCC package. It integrates 32 KB of OTP program memory (organized as 16K x 16), 902 bytes of general-purpose RAM, and 66 digital I/O lines, and is part of Microchip's legacy PIC17C family. A 10-bit analog-to-digital converter with 16 input channels, four capture modules, three PWM modules, and a synchronous serial port (configurable as 3-wire SPI or 2-wire I2C) round out the on-chip peripherals. What is an OTP microcontroller? An OTP (One-Time-Programmable) microcontroller is an MCU whose program memory is implemented as non-volatile EPROM cells that can be written exactly once using a programmer, after which the code is permanent. OTP parts bridge the gap between prototyping (where UV-erasable EPROM is useful) and high-volume production (where mask-ROM is cheapest); OTP is preferred for low-to-mid volume runs because it eliminates the windowed package and eraser light source needed for EPROM. The PIC17C766 sits in the hierarchy: microcontroller -> 8-bit MCU -> RISC MCU -> microcontroller family. Key features include a single-cycle hardware multiplier, an external memory addressing interface that maps the device linearly into a larger program/data memory space, two UART modules, and an instruction set limited to 58 single-word instructions that makes hand-coded assembly straightforward. Hardware stack and pointer-managed tables complement the RISC pipeline. The 84-pin J-leaded PLCC (29.31 x 29.31 mm) supports up to 66 I/O pins plus dedicated analog, debug, and oscillator pads. The device operates from a single 5 V supply and consumes roughly 50 mA active at 16 MHz depending on I/O loading. Designers must respect the maximum clock-input frequency and the EPROM programming algorithm described in the manufacturer datasheet. Programming is performed via Microchip's standard two-pin ICSP interface, and the part is qualified for 0 C to +70 C commercial operation. Typical applications include industrial control panels, motor-driver front-ends, low-cost sensor aggregators, and embedded consumer devices that need a generous pin count and on-chip ADC. The part is also used in educational and legacy equipment designs where the PIC17 architecture is already deployed and code migration would be costly. When designing with the PIC17C766-16/L, reserve an ICSP header on the PCB and add a pull-up on MCLR to ensure reliable programming and reset behaviour. Because the part is OTP, design firmware to allow for in-circuit reprogramming via bootloader on a sibling flash MCU if field updates are a requirement. This page synthesizes distributor pricing, same-family PIC17C drop-in alternatives, parametric comparison data and 84-PLCC package-level design notes not found in a single datasheet reference.

Cotización Contacto

PIC17C766-16E/PT

PIC17C766-16E/PT - 8-Bit OTP MCU, 32KB, 16MHz, 80-TQFP | Microchip

The Microchip Technology PIC17C766-16E/PT is a high-performance 8-bit CMOS OTP microcontroller in the PIC17C family, packaged in an 80-pin TQFP (PT) with 16 MHz maximum clock and 5 V typical supply. It integrates 32 KB of OTP program memory (organized as 16K x 16), 902 bytes of general-purpose RAM, and a rich peripheral set including up to 16 channels of 10-bit ADC, three PWM modules, four capture inputs, an SSP configurable as SPI or I2C, two USART ports, and a 16-bit external memory bus. The -16E suffix denotes 16 MHz operation with the Extended industrial temperature grade (-40C to +125C). What is an 8-bit OTP microcontroller? An 8-bit OTP (One-Time Programmable) microcontroller is a single-chip computer built around an 8-bit data path, with non-volatile program memory that can be written once and then becomes read-only - ideal for production volumes where field reprogramming is not required. It sits within the broader hierarchy of microcontroller -> embedded controller -> semiconductor IC, and the PIC17C family represents Microchip's highest-pin-count, highest-performance 8-bit architecture before the migration to PIC18 flash parts. Key features of the PIC17C766 include 8.25 MIPS throughput (121 ns instruction cycle), 58 single-word instructions, upwards source-code compatibility with PIC16C5X, PIC12CXXX, and PIC16CXX devices, 33 levels of hardware stack, and a hardware multiplier that executes an 8x8 multiply in a single instruction cycle. The 80-pin TQFP footprint exposes a 16-bit external memory interface for systems that need more RAM or specialty memory-mapped peripherals than the on-chip 902 bytes provide. The device is built on an enhanced CMOS process with low-power design techniques, supporting typical applications in industrial control, automotive body and chassis ECUs, appliance control, and instrumentation front-ends. The extended temperature grade and the broader PIC17C peripheral mix distinguish it from the smaller PIC16C and PIC17C75x predecessors. New designs are directed to the recommended replacement PIC18F8520 (per Microchip's product page note "A newer device is available. Please consider PIC18F8520."). Design consideration: when migrating, validate the OTP programming timing, the external memory bus timing, and the ADC acquisition time against the new flash part; the PIC18F8520 is pin-to-pin compatible in many TQFP variants, but peripheral SFR addresses differ. This page synthesizes distributor pricing, drop-in alternatives, and practical sourcing notes not found in the bare manufacturer datasheet.

Cotización Contacto

PIC17C766-16I/L

PIC17C766-16I/L - 8-Bit 16MHz OTP MCU, 32KB, 84-PLCC | Microchip

The Microchip PIC17C766-16I/L is a high-performance 8-bit CMOS EPROM (OTP) microcontroller delivering 8.25 MIPS (121 ns instruction execution) in an 84-pin PLCC package, with 32 KB of program memory (16K x 16 words), 902 bytes of RAM, and 66 digital I/O pins. It integrates a 10-bit analog-to-digital converter and runs at up to 16 MHz from a 4.5 V to 5.5 V supply. The 'I' suffix denotes the industrial operating temperature range of -40 C to +85 C, and the '/L' suffix identifies the 84-pin PLCC (Plastic Leaded Chip Carrier) package, also marketed as LCC-84 / QCCJ-84 with J-bend leads. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (ROM/Flash/OTP), data memory (RAM), and programmable I/O peripherals. The 8-bit MCU class predates 16-bit and 32-bit Cortex-M parts and remains widely deployed in cost-sensitive, deterministic control applications. Within Microchip's portfolio, the PIC17C family sits between the PIC16 mid-range and the enhanced PIC18 devices, offering more peripherals and code space than PIC16 while remaining upward-compatible with PIC12Cxxx and PIC16Cxx instruction sets - only 58 single-word instructions to learn, with all instructions executing in a single cycle except program branches and table reads/writes, which take two cycles. Key differentiating features of the PIC17C766 include its 84-pin PLCC footprint supporting 66 I/O lines, the integrated 10-bit ADC, hardware multiplier for fast DSP-style math, and the 32 KB (16K x 16) OTP program memory that is one-time programmable but production-friendly. The 16 MHz oscillator with 4-clock internal divider yields the 121 ns instruction cycle, and the device supports a wide peripheral set including USART, capture/compare/PWM, and timers suitable for motor and power conversion control. Architecturally, the PIC17C766 uses a Harvard bus (separate program and data paths) and an enhanced 8-bit core with a hardware multiply engine; combined with the OTP memory it is well suited to volume production where firmware is fixed at the time of manufacture. Per the manufacturer datasheet, the PIC17C766 is the largest-memory member of the PIC17C family and is now designated NRND/EOL with the PIC18F8520 recommended as the modern flash-based successor. Typical applications include industrial motor control, HVAC actuators, automotive body and chassis subsystems, white goods and appliance control, and embedded control boards that need many parallel I/O lines plus on-chip ADC. The 84-pin PLCC package is also attractive for legacy through-hole designs and socketed prototyping. When designing with this part, plan for OTP-only programming (code must be committed at production time) and verify supply availability since the device is being phased out in favor of PIC18F flash parts.

Cotización Contacto

PIC17C766-16I/PT

PIC17C766-16I/PT - 8-Bit 16MHz 32KB OTP MCU | Microchip

The Microchip PIC17C766-16I/PT is a high-performance 8-bit CMOS EPROM-based microcontroller delivering 8.25 MIPS (121 ns instruction cycle) at a 33 MHz maximum clock input, packaged in an 80-pin TQFP (12x12 mm) industrial-temperature grade housing. The part integrates 32 KB of OTP program memory (16K x 16 words), 902 bytes of RAM, and 50+ general-purpose digital I/O lines with a 16-bit data bus architecture. According to the manufacturer product page, it supersedes earlier PIC16C5X/PIC16CXX devices while remaining upwards source-code compatible. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (ROM/OTP/Flash), data RAM, and peripheral I/O onto one silicon die. The PIC17C family sits at the top of Microchip's original 8-bit hierarchy, sitting above PIC16C and PIC12C in performance and pin count. Within the broader category tree, an MCU is a microcontroller -> embedded processor -> semiconductor IC -> electronic component. Microcontrollers like the PIC17C766 are the workhorse of industrial control, instrumentation, and legacy embedded designs. Key features include 16 channels of 10-bit Analog-to-Digital conversion, three PWM outputs, four capture inputs, additional timers, and a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C. The device also integrates two USARTs and external memory addressing for program memory expansion beyond the on-chip 32 KB. The 58-instruction RISC instruction set keeps software development straightforward, with only program branches and table reads/writes being two-cycle; all other instructions execute in a single 121 ns cycle. The architecture uses a Harvard-bus layout with separate program and data paths, and a single-cycle hardware multiplier accelerates integer math. The wide operating voltage (4.5 V to 5.5 V) and industrial -40C to +85C temperature range enable deployment in factory-floor and outdoor equipment. The 80-pin TQFP package provides ample I/O for human-machine interface panels, motor controllers, and instrumentation front-ends. Typical applications include industrial process controllers, multi-channel data acquisition systems, motor control with PWM, legacy barcode/RF scanners, and automotive body/comfort modules. The external memory bus allows the PIC17C766 to drive character LCD panels and external EPROM/RAM for designs that exceed 32 KB of code. This page synthesizes distributor stock data, same-package drop-in alternatives, and practical design notes not available in the brief manufacturer summary. Note: The Microchip product page recommends PIC18F8520 as the Flash-based successor for new designs; the PIC17C766 remains in service for legacy and OTP-windowed applications.

Cotización Contacto

PIC17C766-33/PT

PIC17C766-33/PT - 8-Bit 33MHz OTP MCU, 32KB | Microchip

The Microchip Technology PIC17C766-33/PT is a high-performance 8-bit CMOS EPROM microcontroller in the PIC17C family, delivering 8.25 MIPS (121 ns instruction cycle) from a 33 MHz clock input. It integrates 32 KB (16K x 16) of One-Time-Programmable (OTP) program memory, 902 bytes of RAM, 50 digital I/O lines, and 16 channels of 10-bit Analog-to-Digital conversion, packaged in an 80-pin TQFP (12x12 mm) form factor. The part is pin-compatible with the 84-pin variants in the family and is designed for embedded control applications that require deterministic single-cycle execution and an extensive peripheral set. A microcontroller (MCU) is a single-chip computer that contains a CPU core, non-volatile program memory, working RAM, and configurable peripherals. The PIC17C family is Microchip's original high-end 8-bit architecture, sitting above the PIC16C5X and PIC16CXX families in performance and addressing capability, and is upwards compatible with their instruction sets. Within the broader taxonomy, the PIC17C766 is an EPROM/OTP microcontroller belonging to the 8-bit RISC microcontroller class, which falls under microcontrollers -> integrated circuits -> semiconductors. Key features include a single-cycle hardware multiplier, four capture inputs, three PWM outputs, an external memory interface, and a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C. The device also integrates two USARTs for asynchronous or synchronous communication, eight timer/counter modules, a programmable brown-out reset, and a watchdog timer with its own on-chip RC oscillator. The 80-pin TQFP package provides commercial-grade (0C to +70C) operation and supports in-system programming through the standard PIC ICSP interface. Architecturally, the PIC17C766 uses a Harvard RISC design with a 16-bit instruction word and an 8-bit data path, which is the source of the often-cited '16-bit instruction, 8-bit data' labeling seen in datasheet snippets. The 33 MHz oscillator drives a four-phase internal clock that produces the 121 ns single-cycle instruction time, except for program branches and table reads/writes which take two cycles. This pipelined design gives the family its deterministic real-time behavior, which is a defining reason designers select it over CISC 8-bit parts. Typical applications include industrial automation controllers, motor control systems, building automation, instrumentation with analog front-ends, and embedded communication gateways. The 10-bit ADC with 16 input channels makes the part well-suited to multi-sensor data acquisition boards, while the dual USART and SPI/I2C peripherals support bridging between local sensor networks and external controllers. The OTP memory is appropriate for production-volume designs where the firmware is finalized before mask ROM or flash migration to PIC18F or dsPIC equivalents. When designing with this device, engineers should verify the 4.5V to 5.5V supply tolerance against any 3.3V peripherals, place a 0.1 uF decoupling capacitor close to each supply pin, and ensure the 33 MHz crystal or oscillator meets the AC electrical characteristics in the datasheet. New designs are encouraged to migrate to the recommended successor (PIC18F8520 per Microchip's product page) where possible, since the PIC17C family is no longer in active production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC17C766-33E/L

PIC17C766-33E/L - 33MHz 8-bit OTP MCU 32KB | Microchip PLCC-84

The Microchip Technology PIC17C766-33E/L is an 8-bit RISC microcontroller from the PIC17C family, delivering up to 33MHz core speed and 8.25 MIPS of processing power, with 32KB (16K x 16) of one-time-programmable (OTP) program memory in an 84-pin PLCC package. The 'E' suffix denotes the Extended industrial temperature grade (-40C to +125C), and 'L' indicates the PLCC-84 package with J-leaded surface-mount terminations. It features a 16-bit data bus architecture and operates from a 4.5V to 5.5V single supply. An 8-bit microcontroller (MCU) is a small computer-on-a-chip built around a CPU, program memory, data RAM, and peripheral interfaces, optimized for embedded control. The PIC17C family sits in the taxonomy: MCU -> 8-bit MCU -> PIC microcontroller -> RISC MCU -> power management/control IC family. PIC MCUs use a Harvard RISC architecture with separate program and data buses, enabling single-cycle instruction execution and predictable interrupt latency. Key features include 58 single-word instructions for simplified programming, single-cycle execution at 121ns (except program branches and table reads/writes which take two cycles), 50 digital I/O pins for external interfacing, and an integrated peripheral set including timers, USART, and capture/compare/PWM modules. The PLCC-84 (Plastic Leaded Chip Carrier) package provides 84 J-bend terminations on a 29.31mm x 29.31mm body, suitable for socketed or reflow-soldered assembly. The PIC17C766 uses a high-performance 8-bit RISC CPU core with a 16-bit wide instruction word and a 16-bit-wide data path, providing 8.25 MIPS throughput. The OTP program memory allows one-time factory or field programming, and the wide instruction set enables compact code density. The device integrates multiple peripheral modules that reduce external component count for embedded applications. Typical applications include industrial automation controllers, automotive body and chassis electronics, HVAC control systems, embedded instrumentation, and legacy PIC-based products. It is also used in printer controllers, motor control boards, and display drivers. Microchip recommends the newer flash-based PIC18F8520 as the modern equivalent for new designs. Design considerations: OTP memory cannot be erased or reprogrammed; for in-system reprogrammability, migrate to the PIC18F8520. The PLCC-84 package requires a socket or carefully designed land pattern with adequate thermal relief for the 4.5-5.5V supply. Decoupling capacitors (100nF plus 10uF bulk) should be placed within 5mm of the VDD pins. This page synthesizes verified distributor pricing, pin-compatible alternatives, and practical design notes for engineers evaluating the PIC17C766-33E/L for legacy maintenance or new design work.

Cotización Contacto

PIC17C766-33E/PT

PIC17C766-33E/PT - 8-bit 33MHz OTP MCU, 32KB Flash, 80-TQFP

The Microchip Technology PIC17C766-33E/PT is a high-performance 8-bit CMOS EPROM/OTP microcontroller in an 80-pin TQFP (12x12 mm) surface-mount package, operating at 33 MHz with a 121 ns instruction cycle. It integrates 32 KB of OTP program memory (16K x 16 organization) and 902 bytes of RAM, supporting 58 single-word instructions executed in a single cycle except for program branches and table reads/writes, which take two cycles. The device is rated for 4.5 V to 5.5 V supply and an extended -40 C to +125 C automotive operating temperature range. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory, RAM, and peripheral interfaces. The PIC17C766 belongs to the PIC 17C family, the highest-end 8-bit PIC architecture, sitting between 8-bit MCUs and 16-bit dsPIC devices in Microchip's portfolio. The family is upwards compatible with the PIC16C5X, PIC12CXXX, and PIC16CXX devices, easing migration for existing code bases. The 17C series targets embedded applications requiring more I/O, more peripherals, and higher throughput than the PIC16 family can deliver. Key differentiating features include 66 digital I/O lines, four capture inputs, three PWM outputs, a 10-bit analog-to-digital converter with 16 input channels, and a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C. External memory addressing extends the addressable program space beyond the internal 32 KB. Two USART channels support asynchronous and synchronous serial communication. Brown-out detect, power-on reset, and a watchdog timer enhance robustness in industrial and automotive environments. Architecturally, the PIC17C766 uses Microchip's classic RISC-based PIC core with a 16-bit-wide instruction word, an 8-bit data path, and a 4-stage pipeline. The Harvard memory architecture separates program and data buses, allowing instruction fetch and operand access to occur in the same cycle, which is what enables the 33 MHz / 121 ns single-cycle throughput. The OTP program memory is one-time programmable and suited to production volumes; for field-reprogrammable needs Microchip recommends migrating to the PIC18F8520 flash successor. Typical applications include industrial automation controllers, automotive body and chassis ECUs, consumer electronics with rich I/O, motor control, and embedded control systems requiring 16-channel ADC sampling. The 80-pin TQFP footprint gives access to nearly all peripheral functions simultaneously, eliminating I/O multiplexing trade-offs. When designing with the PIC17C766-33E/PT, verify that your toolchain supports OTP programming (or use the PIC18F8520 flash migration path) and budget for the OTP programming step in manufacturing flow.

Cotización Contacto

PIC17C766-33I/PT

PIC17C766-33I/PT - 33MHz 8-bit OTP MCU 32KB | Microchip

The Microchip PIC17C766-33I/PT is a high-performance 8-bit CMOS EPROM/OTP microcontroller running at 33 MHz (121 ns instruction cycle) with 32 KB (16K x 16) of program memory, 902 bytes of RAM, and 66 I/O pins in an 80-pin TQFP (12x12 mm) package. The 'I' suffix denotes the industrial operating temperature range (-40C to +85C) and the /PT suffix indicates the TQFP package option. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable peripherals. The PIC17C766 belongs to the PIC17C family, which is Microchip's high-end 8-bit architecture, and falls within the broader hierarchy: microcontroller -> embedded processor -> semiconductor. The 17C line pre-dates the still-active PIC18 family and is characterized by an 8.25 MIPS throughput, 58 single-word instructions, and a Harvard-style architecture with separate program and data buses. Key features include a single-cycle hardware multiplier, 8-bit data bus with a 16-bit instruction word (16-bit data bus width per the cross-reference listing), four 16-bit timers, four capture inputs, three PWM outputs, a 16-channel 10-bit A/D converter, an external memory interface, and a synchronous serial port configurable as either 3-wire SPI or 2-wire I2C. Two UART modules are also provided for asynchronous serial communication. The 10-bit A/D delivers 16 channels of analog input suitable for sensor interfaces and industrial control. Technically, the PIC17C766 uses a RISC-style instruction set with all instructions executing in a single cycle except program branches and table reads/writes (which take two cycles). The 33 MHz oscillator with a 4-clock PLL-style division yields the 121 ns instruction cycle. The wide 16-bit instruction word allows each opcode to carry an 8-bit literal operand, eliminating the need for many two-word instructions and keeping the code density competitive with 8-bit CISC parts. Typical applications include industrial automation and motor control (PWM + A/D feedback), HVAC controllers, sensor aggregation nodes that need 16 analog channels, and embedded control panels that require a large I/O count without resorting to a 16-bit MCU. The 902 bytes of RAM and external memory bus allow expansion for buffer-heavy protocols. The PIC17C766 is recommended for designs that need >50 I/O and >10 analog channels on a single 8-bit device. Because Microchip has formally recommended the PIC18F8520 as a newer replacement, expect PIC17C766 lifecycle to be NRND or mature - verify before starting new designs.

Cotización Contacto

PIC17C766/CL

PIC17C766/CL - 8-Bit 33MHz 32KB EPROM MCU | Microchip | 84-CERQUAD

The Microchip Technology PIC17C766/CL is an 8-bit, high-performance CMOS EPROM microcontroller operating at 33MHz and delivering 8.25 MIPS (121 ns instruction execution) within a 84-pin CERQUAD windowed ceramic package (29.21x29.21 mm). The device integrates 32KB of one-time-programmable EPROM program memory organized as 16K x 16, 902 bytes of general-purpose RAM, and 66 digital I/O lines, making it one of the highest-pin-count members of the legacy PIC17C family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and configurable peripheral interfaces into one package. PIC microcontrollers follow a Harvard RISC architecture with separate program and data buses, and the PIC17C family sits at the high end of the original PIC16C5X/PIC16CXX lineage, expanding register width to 16 bits while preserving the 58-instruction opcode set that enables fast context switching. The PIC17C766 was targeted at complex embedded control tasks requiring simultaneous parallel I/O expansion and multiple serial communication channels (I2C, SPI, UART/USART). Key features include 33MHz maximum operating speed, 8.25 MIPS throughput, 32KB (16Kx16) EPROM program memory, 902 bytes of RAM, 66 I/O pins, an external oscillator interface, and a windowed CERQUAD package that allows UV erasure of EPROM for code development and prototyping. The device operates from 5V and is pin-compatible with the lower-memory PIC17C762 and PIC17C756A variants in the same package. Architecturally, the PIC17C766 uses a 16-bit wide instruction word and a 16-level hardware stack, supporting 58 single-word instructions with single-cycle execution (121 ns @ 33MHz), except for program branches and table reads/writes which are two cycles. The MCU includes three 8-bit I/O ports (PORTA, PORTB, PORTC) plus additional port pins enabled by the 84-pin package, with built-in peripherals for serial communication. Typical applications include industrial automation controllers, HVAC system controllers, automotive body electronics, security and access control systems, point-of-sale terminals, and any legacy design requiring a high-I/O-count OTP/EPROM microcontroller in a windowed ceramic package for in-circuit emulation or field re-programmability. The /CL suffix denotes the CERQUAD J-lead windowed package for prototype development; production builds use the plastic /L or /PT variants. When designing with this part, note that the EPROM window is required for UV erasure, so the CERQUAD package is not suitable for high-vibration or cost-sensitive production. Microchip recommends migrating to the PIC18F8520, a flash-based successor with code compatibility, modern peripherals, and a smaller footprint. Ensure your programmer supports the PIC17C family and the 84-CERQUAD package; older EPROM programmers with UV erasers are required for development cycles. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC17C766T-16/PT

PIC17C766T-16/PT - 8-Bit 16MHz OTP MCU, 32KB, 80-TQFP | Microchip

The Microchip Technology PIC17C766T-16/PT is an 8-bit RISC CMOS OTP microcontroller in the PIC17C family, delivered in an 80-pin TQFP (PT) package, with a 16 MHz maximum clock input and 32 KB (16K x 16) of One-Time-Programmable program memory. It delivers up to 8.25 MIPS performance with a 121 ns single-cycle instruction execution, integrates a single-cycle hardware multiplier, and provides 902 bytes of general-purpose RAM. The 'T' suffix indicates tape-and-reel packaging, while the '-16' speed grade specifies the 16 MHz clock input variant, and the 'PT' package code designates the 12x12 mm 80-pin TQFP. A PIC17C series microcontroller is part of Microchip's high-performance 8-bit CMOS EPROM/OTP MCU family, positioned between the PIC16C mid-range and PIC18 enhanced architectures in the taxonomy: PIC17C -> PIC16C/PIC17C/PIC18 family -> 8-bit microcontroller -> MCU -> semiconductor. The PIC17C line is upwards compatible with the PIC16C5X, PIC12CXXX, and PIC16CXX instruction sets, giving designers an easy migration path while gaining additional timers, capture/PWM peripherals, and 16 channels of 10-bit ADC. Key features include 66 general-purpose I/O pins, 50 programmable I/O ports, integrated peripherals (I2C, SPI, and UART/USART), 4 capture inputs, 3 PWM outputs, external memory addressing, and 16 channels of 10-bit A/D converter. The device supports a 4.5 V to 5.5 V supply range, offers a commercial operating temperature grade, and is housed in a plastic TQFP-80 surface-mount package with gull-wing leads, providing a compact 12x12 mm footprint for high-pin-count embedded designs. The PIC17C766T-16/PT architecture is built on a RISC core with only 58 single-word instructions, simplifying code development while still delivering high throughput via 121 ns instruction cycles (except 2-cycle branches and table reads/writes). The CMOS EPROM/OTP process technology combines high performance with low power consumption, and the integrated hardware multiplier accelerates arithmetic operations. Typical applications include industrial control systems, motor control, automotive body and chassis electronics, embedded instrumentation, sensor interfaces, and consumer electronics requiring high I/O count and ADC channels. The 16 MHz operating speed and rich peripheral set also suit HVAC controllers, security systems, and power-conversion front-end controllers. When designing with this device, ensure the chosen development tools (MPLAB XC8, PICSTART Plus, PRO MATE II, or MPLAB PM3 programmers) match the OTP device programming model. Because the memory is OTP, code revisions require a new device. Verify decoupling, oscillator stability, and MCLR reset hardware as described in the Microchip PIC17C766 datasheet. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and practical design notes - going beyond what is available in the manufacturer datasheet or a typical distributor listing to give engineers a single, citation-ready reference for the PIC17C766T-16/PT.

Cotización Contacto

PIC17C766T-16E/PT

PIC17C766T-16E/PT - 8-Bit OTP MCU, 32KB, 66 I/O, 80-TQFP | Microchip

The Microchip Technology PIC17C766T-16E/PT is an 8-bit high-performance OTP (One-Time Programmable) microcontroller from the PIC® 17C family, offering 32KB (16K x 16) of program memory and 902 bytes of RAM in an 80-pin TQFP (12x12 mm) package. It executes instructions at a 16 MHz clock rate, achieving single-cycle execution in 121 ns (except for program branches and table reads/writes, which are two-cycle), and is built around Microchip's enhanced RISC architecture with only 58 single-word instructions to learn. An OTP-based microcontroller is a non-volatile program-memory device that can be programmed once after manufacture using a device programmer, and retains its code indefinitely without a battery. The OTP variant sits in the broader hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> RISC MCU -> programmable logic device -> semiconductor. The PIC17C family specifically targets applications requiring higher performance and more I/O than the PIC16 mid-range family, while keeping the familiar PIC instruction set. Key features of the PIC17C766T-16E/PT include 66 digital I/O lines distributed across multiple ports, an internal 8 MHz oscillator reference, an external oscillator input for higher-frequency operation up to 16 MHz, a 16-bit data bus architecture, and a 4.5V to 5.5V single-supply operating range. It also integrates multiple timers, a USART, and interrupt capability typical of the PIC17C series. Typical applications for the PIC17C766T-16E/PT include industrial control systems, instrumentation, motor control, and any embedded design needing a high-pin-count 8-bit MCU with deterministic single-cycle instruction execution. Engineers often select this part when migrating from PIC16 designs that have outgrown their I/O count. A key design consideration is that the 'E' suffix denotes the industrial operating temperature range (-40°C to +125°C) and the 'T' suffix indicates tape-and-reel packaging. Because this is an OTP device, firmware revisions require a new part; consider the Flash-based PIC18F or dsPIC families for in-field reprogrammability. This page synthesizes distributor pricing, package-level alternatives, and practical design considerations not typically found in the manufacturer datasheet. Pricing reflects real-time distributor data as of 2026-09-26.

Cotización Contacto

PIC17C766T-16I/PT

PIC17C766T-16I/PT - 8-Bit OTP MCU 32KB EPROM TQFP-80 | Microchip

The Microchip Technology PIC17C766T-16I/PT is a high-performance 8-bit CMOS EPROM microcontroller with 32KB of on-chip program memory, 902 bytes of RAM, and a 10-bit analog-to-digital converter, delivered in an 80-pin TQFP (PT) package supplied on tape and reel. The -16 speed grade specifies a 16 MHz maximum clock input with a 121 ns instruction cycle, executing all instructions in a single cycle except program branches and table reads/writes which take two cycles. The device operates from a 4.5V to 5.5V single supply and provides 66 general-purpose digital I/O lines plus dedicated peripheral interfaces. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, RAM, and peripherals on one die; OTP EPROM-based MCUs ship with one-time-programmable memory that can be erased only with a UV windowed package, making them ideal for low-volume production or pre-programmed module deployment. The PIC17 family sits above baseline PIC16 devices in Microchip's hierarchy, adding a wider 16-bit instruction path, hardware multiplier, and a Harvard architecture that separates program and data buses for deterministic execution. This combination delivers approximately 8 MIPS sustained throughput while retaining the low power and small footprint characteristic of PIC mid-range devices. Key features of the PIC17C766 include a hardware 8x8 single-cycle multiplier, 10-bit 12-channel successive-approximation ADC, two 8-bit timers plus one 16-bit timer/counter, universal synchronous/asynchronous receiver-transmitter (USART), and a capture/compare/PWM module. The integrated watchdog timer with on-chip RC oscillator and power-on reset circuit reduce external component count. The -16I industrial temperature grade spans -40°C to +85°C, making the part suitable for harsh embedded environments and outdoor industrial installations. Architecturally, the PIC17C766 employs an enhanced Harvard core with a two-stage instruction pipeline and dedicated hardware stack for fast interrupt response. The EPROM program memory is windowed for prototype erasure, while the production-grade -16I/PT variant is intended for one-time programming. The instruction set comprises only 58 single-word instructions, simplifying code generation and reducing firmware development time compared with multi-byte CISC architectures. Typical applications include industrial control systems, motor control front-ends, sensor signal conditioning, smart instrumentation, and embedded data acquisition modules. The 10-bit ADC and 50+ I/O lines make the device well suited to multi-channel analog monitoring boards used in factory automation. When designing with this MCU, allocate adequate decoupling (100 nF ceramic plus 10 µF bulk) on VDD and AVSS pins, place the crystal within 1 cm of the OSC pins, and verify that the brown-out reset voltage is configured below the minimum operating rail. The part is now in mature production; engineers should confirm last-time-buy status directly with Microchip before committing new designs. This page consolidates distributor pricing as of 2026-09-26, parameter-by-parameter drop-in alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC17C766T-33/PT

PIC17C766T-33/PT - 33MHz 8-bit OTP MCU 32KB 66 I/O | Microchip

The Microchip Technology PIC17C766T-33/PT is a high-performance 8-bit CMOS EPROM (OTP) microcontroller featuring a 33 MHz clock input, 121 ns instruction cycle, 32 KB (16K x 16) of OTP program memory, 902 bytes of RAM, and 66 I/O pins, packaged in an 80-pin TQFP (12x12 mm) form factor. The PIC17C family architecture delivers 8.25 MIPS throughput and integrates a hardware 8x8 single-cycle multiplier, 10-bit A/D conversion peripheral, and a RISC instruction set of 58 single-word instructions, of which most execute in a single 121 ns cycle. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (ROM/Flash/OTP), working RAM, and peripheral interfaces such as timers, communication ports, and ADCs. The PIC17C766T sits in Microchip's PIC17C high-end 8-bit tier (hypernym chain: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC), historically aimed at applications demanding more code space, I/O, and analog integration than the mid-range PIC16C family could supply. It is upwards-compatible with PIC16C5X, PIC12CXXX, and PIC16CXX devices, easing code migration. Key features include a 33 MHz oscillator, 121 ns minimum instruction cycle (except program branches and table reads/writes which take two cycles), 10-bit A/D converter, 50+ I/O ports (per datasheet variant), and a wide 4.5 V to 5.5 V supply range. The OTP program memory allows one-time programming for production builds, while the on-chip 902-byte RAM supports substantial data buffering and stack depth. The 80-pin TQFP (PT) package provides ample I/O access for matrix keypads, LCD drivers, and multi-channel sensor acquisition systems. The PIC17C766T-33/PT uses a Harvard RISC architecture with separate program and data buses (16-bit program bus, 8-bit data bus), enabling simultaneous instruction fetch and operand access. Its single-cycle hardware multiplier accelerates arithmetic-heavy control loops, and the integrated 10-bit ADC eliminates the need for external analog conversion in many sensing designs. Per Microchip's product advisory, a newer device (PIC18F8520) supersedes this part for new designs, but PIC17C766T remains in active production for long-life and legacy sustainment programs. Typical applications include industrial automation controllers, building HVAC and access-control panels, instrumentation front-ends with ADC, motor-control front ends, and embedded control boards in medical and test equipment. The 66 I/O and 10-bit ADC make it well-suited to multi-channel sensor acquisition and discrete control tasks. In automotive subsystems (non-safety), the device can also serve as a body controller, although PIC18 alternatives are now recommended for new platforms. When designing with this part, ensure the OTP programming step is accounted for in manufacturing flow (windowed JW variants are needed for prototype code iteration). The 33 MHz / 5 V operation implies 1.2 W maximum core dissipation; thermal relief on the TQFP pad is advisable. Migrating to PIC18F8520 (or PIC18F8720) is recommended for new designs where Flash reprogrammability is desired, since PIC17C766T is OTP-only and cannot be field-updated.

Cotización Contacto

PIC17C766T-33E/PT

PIC17C766T-33E/PT - 8-bit 33MHz PIC MCU 32KB OTP 80-TQFP | Microchip

The Microchip Technology PIC17C766T-33E/PT is an 8-bit PIC17C-series RISC microcontroller with a 33 MHz core clock and 32 KB (16K x 16) of One-Time-Programmable (OTP) program memory, packaged in an 80-pin TQFP (12x12 mm). The device delivers up to 8.25 MIPS (121 ns single-cycle instruction execution) from its CMOS PIC core, supported by 902 bytes of general-purpose RAM and 50 to 66 digital I/O pins depending on peripheral remapping, and integrates Brown-out Detect/Reset, Power-On Reset, PWM, and a Watchdog Timer as on-chip peripherals. The 'E' suffix denotes the Extended industrial operating temperature grade of -40C to +125C, while the 'T' suffix indicates Tape & Reel packaging for surface-mount assembly. An 8-bit PIC microcontroller (MCU) is a Harvard-architecture CMOS processor that uses a separate program and data bus to fetch instructions and operands in parallel, enabling deterministic single-cycle instruction execution. PIC MCUs occupy the lowest tier of the embedded controller hierarchy: microcontroller -> embedded controller -> RISC processor -> semiconductor. The PIC17C family specifically sits above the PIC16 and below the PIC18 in code density and peripheral integration, targeting applications that need more I/O and PWM channels than PIC16 parts can offer while remaining easy to program. Key features include the PIC17C-series' 16-bit instruction word for compact code, 33 MHz maximum operating frequency (the '33' designator), 4.5 V to 5.5 V single-supply operation, hardware multiply, 8-level deep hardware stack, and up to 16 sources of interrupt. The 80-pin TQFP package exposes 50 to 66 I/O lines plus dedicated oscillator, reset, and power pins, giving designers enough headroom for human-interface or motor-control front-ends. Typical applications include industrial control panels, motor-control front-ends (washing machines, small appliances, HVAC blowers), automotive body and chassis subsystems (pre-CAN era), instrument clusters, and white-goods user-interface boards. The Extended temperature grade also supports outdoor industrial installations. The Microchip product page notes that Microchip recommends PIC18F8520 as the recommended migration path for new designs, since the PIC17C766 family is no longer recommended for new designs. When designing with this part, budget for an external oscillator or crystal across OSC1/OSC2, observe the 4.5 V brown-out threshold during power-supply ramp design, and allocate sufficient decoupling (one 100 nF per VDD/VSS pair) near the package. Designers should plan for OTP programming time and required programming voltage sequencing during production. This page consolidates distributor pricing, current lifecycle status, and a practical drop-in alternatives matrix not found in the manufacturer datasheet alone.

Cotización Contacto

Subcategorías

Productos (35.000+)

PIC17C762-33E/L - 8-bit 33MHz MCU, 16KB OTP, 84-PLCC | Microchip

PIC17C762-33E/PT - 33MHz 8-bit OTP MCU, 16KB EPROM, 80-TQFP | Microchip

PIC17C762-33I/PT - 8-bit OTP MCU, 33MHz, 16KB EPROM | Microchip

PIC17C762T-16/L - 16MHz 8-bit OTP MCU 84-PLCC | Microchip

PIC17C762T-16E/PT - 8-Bit 16MHz OTP MCU 16KB | Microchip

PIC17C762T-16I/L - 16MHz 8-bit EPROM MCU, 16KB OTP, 10-bit ADC | Microchip

PIC17C762T-33/L - 8-Bit 33MHz OTP MCU, 16KB EPROM, 84-PLCC | Microchip

PIC17C762T-33/PT - 33MHz 8-Bit OTP MCU with 10-bit ADC | Microchip

PIC17C762T-33I/L - 33MHz 8-bit OTP MCU, 16KB EPROM, 10-bit ADC | Microchip

PIC17C762T-33I/PT - 33 MHz 8-bit EPROM MCU, 16KB, 80-TQFP

PIC17C766-16/L - 8-Bit 16MHz OTP MCU 32KB 84-PLCC | Microchip

PIC17C766-16E/PT - 8-Bit OTP MCU, 32KB, 16MHz, 80-TQFP | Microchip

PIC17C766-16I/L - 8-Bit 16MHz OTP MCU, 32KB, 84-PLCC | Microchip

PIC17C766-16I/PT - 8-Bit 16MHz 32KB OTP MCU | Microchip

PIC17C766-33/PT - 8-Bit 33MHz OTP MCU, 32KB | Microchip

PIC17C766-33E/L - 33MHz 8-bit OTP MCU 32KB | Microchip PLCC-84

PIC17C766-33E/PT - 8-bit 33MHz OTP MCU, 32KB Flash, 80-TQFP

PIC17C766-33I/PT - 33MHz 8-bit OTP MCU 32KB | Microchip

PIC17C766/CL - 8-Bit 33MHz 32KB EPROM MCU | Microchip | 84-CERQUAD

PIC17C766T-16/PT - 8-Bit 16MHz OTP MCU, 32KB, 80-TQFP | Microchip

PIC17C766T-16E/PT - 8-Bit OTP MCU, 32KB, 66 I/O, 80-TQFP | Microchip

PIC17C766T-16I/PT - 8-Bit OTP MCU 32KB EPROM TQFP-80 | Microchip

PIC17C766T-33/PT - 33MHz 8-bit OTP MCU 32KB 66 I/O | Microchip

PIC17C766T-33E/PT - 8-bit 33MHz PIC MCU 32KB OTP 80-TQFP | Microchip