Circuitos integrados

PIC18F04Q41-E/SL

PIC18F04Q41-E/SL - 16KB Flash 8-bit MCU | Microchip

The Microchip Technology PIC18F04Q41-E/SL is an 8-bit PIC18 microcontroller featuring 16KB of Flash program memory, 1KB of SRAM, and 512 bytes of EEPROM, operating at up to 64 MHz in a 14-pin SOIC package. The device is part of the PIC18-Q41 family, which targets compact, high-performance sensor and real-time control applications with advanced on-chip analog peripherals. A PIC18 microcontroller is an 8-bit reduced instruction set computer (RISC) MCU based on Microchip's enhanced Harvard architecture. The PIC18 family sits within the hierarchy of microcontrollers -> 8-bit microcontrollers -> embedded controllers -> integrated circuits, and is widely deployed across industrial, consumer, and IoT applications where deterministic real-time performance and low power are essential. The Q41 sub-family extends this legacy with integrated analog intelligence previously requiring external op-amps, comparators, and DACs. Key features of the PIC18F04Q41-E/SL include 16KB Flash (16K x 8), 1KB SRAM, 512 bytes EEPROM, a 12-bit ADC2 with computation, two 8-bit DACs, an on-chip operational amplifier, an 8-bit timer, a 16-bit PWM module, and Core Independent Peripherals (CIPs) such as CLC, NCO, and PWM. The device operates from 1.8V to 5.5V, supports up to 64 MHz system clock, and includes a four-channel DMA controller, two I2C/SPI interfaces, one UART, and up to 12 I/O pins. The extended (-E) temperature grade spans -40C to +125C. The PIC18-Q41 architecture combines a high-throughput 8-bit core with intelligent analog peripherals. The 12-bit ADC2 includes built-in oversampling and accumulation, automated channel scanning, and threshold comparison, offloading CPU overhead for sensor-acquisition loops. The integrated op-amp and two 8-bit DACs allow active-filter, transducer-bridge conditioning, and programmable reference generation without external components. Hardware CIPs (CLC, NCO, PWM, DMA) execute logic, waveform synthesis, and data movement without CPU intervention, enabling deterministic response times in closed-loop control. Typical applications include IoT sensor nodes, LED lighting controllers, portable medical devices, low-cost BLDC fan or pump control, and industrial sensor interfaces. The integrated analog front end reduces BOM cost for thermocouple, strain-gauge, and photo-sensor conditioning. Combined with the 16KB Flash footprint, the PIC18F04Q41 suits both small sensor hubs and space-constrained edge nodes. Designers should budget the SOIC-14 thermal envelope (theta_JA ~ 100 C/W on 1oz 2-layer JEDEC EIA/JESD51 board) for the -40C to +125C operating range, observe Microchip AN2648 analog-Layout guidelines for the on-chip op-amp routing, and verify that the 5.5V VDD absolute maximum is not exceeded during hot-plug or inductive load transients. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not consolidated on the manufacturer datasheet.

Cotización Contacto

PIC18F04Q41-I/SL

PIC18F04Q41-I/SL - 8-Bit 64MHz MCU, 16KB Flash | Microchip

The Microchip Technology PIC18F04Q41-I/SL is an 8-bit PIC18 microcontroller delivering 64 MIPS throughput from a 64 MHz CPU clock, integrated into a 14-pin SOIC package with 16 KB of Flash program memory and 1 KB of SRAM. The PIC18F04Q41-I/SL belongs to the PIC18-Q41 product family, which combines Core Independent Peripherals (CIPs) with sophisticated analog blocks such as an on-chip operational amplifier, a 12-bit Analog-to-Digital Converter with Computation (ADCC), 8-bit DACs, and 16-bit PWMs for high-performance sensor and real-time control applications. A PIC18 microcontroller is an 8-bit Harvard-architecture MCU from Microchip that sits within the broader 8-bit MCU category (8-bit MCU -> microcontroller -> embedded processor -> semiconductor). The PIC18 family extends the mid-range PIC16 architecture with a 16-bit instruction word, hardware multiply, linear program memory up to 128 KB, and a vectored interrupt controller, making it suitable for applications that exceed PIC16 capabilities but do not require a 16-bit dsPIC or 32-bit MCU. Key features of the PIC18F04Q41-I/SL include 16 KB Flash (16K x 8), 1 KB SRAM, 512 bytes EEPROM, a 12-bit ADCC, dual 8-bit DACs, a 16-bit PWM, an on-chip op-amp, CLC (Configurable Logic Cell) CIPs, and peripherals such as UART, SPI, I2C, and 12-bit ADC2. The wide 1.8 V to 5.5 V operating range supports battery and 5 V regulated designs, while peripheral pin select (PPS) allows flexible signal routing on the limited 14-pin footprint. Architecturally, the part uses Microchip's enhanced mid-range core with a modified Harvard bus, single-cycle ALU access to working registers, and 31-level hardware stack. The integrated CIPs - CLC, NCO, PWM, and ADCC - allow autonomous operation without CPU intervention, freeing MIPS for application logic and reducing interrupt load in real-time control loops. Typical applications include IoT sensor nodes, LED lighting controllers, medical wearables, low-end motor control, white goods, and battery-powered instrumentation. The combination of compact package, on-chip op-amp, and 12-bit ADC makes it especially attractive for analog signal conditioning and sensor fusion designs. When designing with this MCU, evaluate the 14-pin I/O budget against required pin functions and use PPS to remap peripherals. Ensure the supply decoupling network follows Microchip's recommended 100 nF + bulk capacitor placement to keep the 5.5 V tolerant pins within absolute maximum ratings during ESD transients. This page synthesizes distributor pricing, pin-compatible same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC18F04Q41-I/ST

PIC18F04Q41-I/ST - 8-bit 64MHz 16KB Flash MCU, TSSOP-14 | Microchip

The Microchip Technology PIC18F04Q41-I/ST is an 8-bit PIC18 microcontroller IC running at 64MHz with 16KB of Flash program memory, 1KB of SRAM, and 512 bytes of EEPROM, packaged in a 14-pin TSSOP. It belongs to the PIC18-Q41 family, which is purpose-built for compact, analog-rich sensor and real-time control applications. On-chip resources include a 12-bit ADC with Computation (ADCC) supporting capacitive voltage divider techniques, two 8-bit DAC modules, an operational amplifier, a 16-bit PWM, and DMA. An 8-bit microcontroller is a small, single-chip computer built around an 8-bit data bus and a Harvard or von Neumann architecture. Within the taxonomy it sits under MCU -> microcontroller -> embedded processor -> integrated circuit. The PIC18F04Q41 belongs to the PIC18 family of Microchip's 8-bit PIC microcontrollers, which add enhanced instruction set, hardware multiplier, and C-friendly architecture on top of the original PIC16 core, balancing low cost and ease of use with deterministic real-time behavior. Key features include 16 KB Flash, 1 KB SRAM, 512 B EEPROM, 12-bit ADCC, two 8-bit DACs, one on-chip op-amp, 16-bit PWM with complementary outputs and fault handling, CLC (Configurable Logic Cell) peripherals, DMA, and a wide 1.8V to 5.5V supply range. The -I/ST industrial temperature grade spans -40C to +85C, while the TSSOP-14 footprint keeps the BOM small for space-constrained designs. Technically, the PIC18-Q41 family integrates analog and digital signal conditioning directly on die, so a sensor front end, signal chain, and control loop can run from a single IC. The ADCC automates capacitive touch averaging, filtering, oversampling, and threshold decisions, while the CLC, 16-bit PWM, and op-amp enable hardware-level motor, lighting, and signal-conditioning loops without burdening the CPU. Typical applications include capacitive touch keypads and sliders, IoT sensor nodes, LED lighting and color-mixing drivers, low-cost BLDC and brushed DC motor control, battery-powered instrumentation, and medical/industrial sensor signal conditioning. The integrated op-amp plus DAC pair is especially attractive for transducer excitation and signal conditioning. When designing with this part, pay attention to the decoupling strategy: place a 100 nF ceramic plus 1 uF bulk capacitor near VDD, and provide a low-impedance ground return to keep ADC readings clean. Use the on-chip op-amp wisely - its bandwidth and offset must be budgeted against the analog signal chain. The TSSOP-14's exposed thermal pad on this small pin count package should still be soldered to a copper pour to dissipate switching noise. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC18F05Q40-E/SL

PIC18F05Q40-E/SL - 8-bit 64MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC18F05Q40-E/SL is an 8-bit RISC microcontroller from the PIC18-Q40 family, featuring a 64MHz PIC18 CPU core with 32KB Flash program memory, 2KB SRAM, and 512 bytes EEPROM, housed in a 14-pin SOIC package. It integrates a 12-bit ADC with Computation (ADCC), an 8-bit DAC, 16-bit PWMs, Direct Memory Access (DMA), Configurable Logic Cells (CLC), and PPS (Peripheral Pin Select) for flexible signal routing. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals on one IC. The PIC18 family occupies the upper tier of Microchip's 8-bit portfolio, offering enhanced instruction set (77 instructions with hardware multiply), C-friendly architecture, and deterministic interrupt handling. The PIC18-Q40 sub-family specifically targets real-time control and sensor applications with built-in analog and digital peripherals that minimize external component count. Key features include 64MHz maximum clock (16 MIPS), 12-bit ADCC with up to 30 analog channels, 8-bit DAC module, multiple 16-bit PWM channels with complementary outputs and dead-band control, hardware DMA for offloading CPU data movement, CLC blocks for custom combinational/sequential logic, and Zero-Cross Detect (ZCD) for AC line sensing. Communication interfaces include UART, SPI, and I2C. The 14-pin SOIC package exposes 12 GPIO-capable pins after accounting for power, programming, and reset. The Q40 architecture combines traditional PIC18 deterministic execution with modern signal-conditioning peripherals. The ADCC automates averaging, oversampling, and threshold comparison, while the CLC lets designers implement custom glue logic in silicon rather than discrete gates. PPS allows remapping of digital peripherals to different pins, simplifying PCB layout and BOM reuse across variants. Typical applications include real-time motor control (BLDC, stepper, DC), LED lighting drivers with dimming, sensor signal conditioning, smart appliances, consumer white goods, and IoT edge nodes requiring deterministic response with mixed-signal interfaces. The integrated 12-bit ADC with computation makes it ideal for sensor fusion applications where multiple analog inputs require filtering and threshold detection. When designing with this device, plan pin allocation carefully because PPS can move digital peripherals but not analog. Decouple VDD with a 100nF ceramic capacitor placed within 5mm of the pin, and provide bulk capacitance of at least 4.7uF for ADC reference stability. Program/debug interfaces require dedicated ICSP pins - allocate MCLR/ICSPCLK/ICSPDAT early in the schematic. This page synthesizes distributor pricing as of 2026-09-26, drop-in alternative MPNs from the same PIC18-Q40 family, and practical design notes not aggregated on any single distributor page.

Cotización Contacto

PIC18F05Q40-E/ST

PIC18F05Q40-E/ST - 32KB Flash, 64MHz 8-bit MCU | Microchip

The Microchip Technology PIC18F05Q40-E/ST is a compact, high-performance 8-bit PIC18 microcontroller featuring 32KB of Flash program memory, 2KB of RAM, and 512 bytes of EEPROM, housed in a 14-pin TSSOP package. It operates at up to 64MHz with a 12-bit ADC with Computation (ADC2), dual 8-bit DACs, 16-bit PWMs, Direct Memory Access (DMA), Configurable Logic Cells (CLC), and Peripheral Pin Select (PPS) for flexible signal routing in real-time control and sensor applications. An 8-bit microcontroller (MCU) is a microprocessor integrated with program memory, data memory, I/O peripherals, and a CPU on a single silicon die, optimized for embedded control tasks. The PIC18 architecture sits in the broader taxonomy as: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor device. PIC18-Q40 family parts are particularly suited for low-power sensor interfacing and closed-loop control loops, with on-chip analog and digital peripherals eliminating many external components. The 12-bit ADC2 with Computation performs hardware averaging, threshold comparison, and automated accumulation, offloading CPU overhead in high-sample-rate sensor reads. The dual 8-bit DACs enable dual-channel analog output references or waveform generation. The 16-bit PWMs support high-resolution motor control, LED dimming, and digital power conversion. Direct Memory Access (DMA) moves ADC results to memory without CPU intervention, freeing the core for application logic. PPS allows remapping of digital peripherals to a wide range of pins, simplifying PCB layout. Typical applications include IoT sensor nodes, BLDC motor control, smart lighting, battery management, home appliance controls, and consumer electronics with capacitive touch or rotary user interfaces. The wide 1.8V to 5.5V supply range supports both single-cell Li-ion and 5V-rail designs. When designing with this device, leverage PPS to optimize PCB routing and use ADC2 with Computation to minimize firmware overhead. Pair the TSSOP-14 variant with the PIC18-Q40 family toolchain (MPLAB X IDE + XC8 compiler + MPLAB Code Configurator) for rapid peripheral configuration.

Cotización Contacto

PIC18F05Q40-I/SL

PIC18F05Q40-I/SL - 32KB Flash 8-bit MCU, 64MHz, 14-SOIC | Microchip

The Microchip Technology PIC18F05Q40-I/SL is a compact, high-performance 8-bit PIC microcontroller from the PIC18-Q40 family, delivered in a 14-pin SOIC (SL) package. It integrates 32 KB of Flash program memory, 2 KB of SRAM, and 512 bytes of EEPROM, with a 64 MHz CPU speed delivering up to 16 MIPS of instruction throughput. The device targets real-time control and sensor applications with built-in 12-bit ADC2 (with Computation), 8-bit DAC modules, 16-bit PWMs, Direct Memory Access (DMA), and Configurable Logic Cells (CLC). A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals onto one IC. The PIC18 family uses a modified Harvard 8-bit RISC architecture with an instruction set optimized for C-compiled code (XC8). PIC MCUs sit in the broader hierarchy of embedded controllers, alongside 16-bit PIC24, 32-bit PIC32, and competitor families such as STM32 (Cortex-M) and AVR (megaAVR/XMEGA). Within Microchip, Q40-series parts are the dedicated ADC-and-PWM-rich "real-time control" sub-family, designed to replace external op-amps, analog comparators, and discrete timers with on-chip intelligent peripherals. Key features include a 12-bit differential ADC with Computation engine for automated oversampling and filtering, 10-bit slope compensation, two 8-bit DACs, four 16-bit PWMs with complementary outputs and dead-band control, CLC for combinational/sequential logic without external glue, and built-in DMA that lets peripherals move data without CPU intervention. The device also includes an 8x8 hardware multiplier and a 32 MHz internal oscillator, reducing external component count in cost-sensitive designs. Architecture-wise the PIC18-Q40 uses a 16-bit-wide instruction word with 8-bit data path, 31-level hardware stack, and a unified interrupt controller. The 12-bit ADC with Computation (ADC2) reduces software overhead by performing averaging, threshold detection, and burst averaging in hardware, enabling deterministic motor-control loops. Internal voltage reference and zero-cross detect accelerate closed-loop appliance and lighting designs. Typical applications include BLDC and brushed DC motor control, LED lighting drivers, sensor hubs with DMA-driven acquisition, capacitive-touch user interfaces using the on-chip CLC and ADC2, home appliances, and IoT edge nodes. Designers typically place the MCU between the power-stage MOSFETs / LED strings and the host MCU to handle the deterministic timing-critical control loop locally. When designing with this part, ensure the 14-SOIC exposed pad is soldered to a sufficient copper pour for thermal relief; power budget on FOSC=64 MHz at 3.3 V is roughly 12 mA active. Use MPLAB X IDE with the XC8 compiler and MPLAB Code Configurator (MCC) to graphically wire CLC and PWM peripherals - the MCC plugin generates the peripheral setup code and saves weeks of register-level firmware bring-up. This page consolidates distributor pricing, drop-in alternatives from Microchip's Q40 family, and practical design notes that go beyond the manufacturer datasheet - giving procurement and firmware teams a single reference for the PIC18F05Q40-I/SL.

Cotización Contacto

PIC18F05Q40T-I/SL

PIC18F05Q40T-I/SL - 32KB Flash 8-bit MCU, 64MHz, 14-SOIC | Microchip

The Microchip Technology PIC18F05Q40T-I/SL is a high-performance 8-bit PIC microcontroller from the PIC18-Q40 family, featuring 32KB of Flash program memory, 2KB of SRAM, and 512 bytes of EEPROM in a 14-pin SOIC package. It operates at up to 64MHz and integrates a 12-bit ADC with Computation (ADC2), two 8-bit DACs, 16-bit PWMs, Direct Memory Access (DMA), and Configurable Logic Cells (CLC), making it a compact solution for real-time control and sensor-interface applications. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals, used to embed intelligence in electronic systems ranging from consumer appliances to industrial controllers. The PIC18F family is Microchip's high-end 8-bit architecture, combining a RISC instruction set with advanced peripherals such as 16-bit PWMs, DMA, and configurable logic - bridging the gap between simple 8-bit parts and more expensive 16-bit MCUs. Key features of the PIC18F05Q40 include a 64MHz internal oscillator with PLL, 12-bit ADC2 with computation modes for automated signal averaging and threshold comparison, two 8-bit DAC outputs, 16-bit PWM with complementary and dead-band modes, four Configurable Logic Cells that implement combinational/sequential logic without external gates, and CLC + DMA + PPS (Peripheral Pin Select) for flexible signal routing. The device also includes UART, SPI, and I2C peripherals, plus zero-crossing detection and a math accelerator. Architecture-wise, the PIC18F05Q40 uses an enhanced Harvard RISC core with 8-bit data path and 16-bit instruction words, optimized C-friendly instruction set, and Microchip's eXtreme Low Power (XLP) technology for battery-friendly operation. The integrated DMA engine offloads peripheral-to-memory transfers from the CPU, enabling deterministic real-time response. PPS lets designers remap digital peripherals to nearly any I/O pin, simplifying PCB routing. Typical applications include LED lighting and driver control, sensor signal conditioning, motor control with closed-loop feedback, capacitive-touch user interfaces, household appliances, IoT end-nodes, and small home appliances. The compact 14-SOIC footprint also suits space-constrained designs. When designing with this MCU, verify the supply voltage range (1.8V-5.5V), provide adequate decoupling on VDD/AVDD, and use Microchip's MPLAB X IDE with XC8 compiler for code development. Programming is supported via ICSP. This page synthesizes distributor pricing, drop-in same-family alternatives, and design notes not found in the manufacturer datasheet, enabling faster engineering decisions.

Cotización Contacto

PIC18F05Q40T-I/ST

PIC18F05Q40T-I/ST - 32KB Flash 8-bit MCU, 64MHz | Microchip

The Microchip Technology PIC18F05Q40T-I/ST is an 8-bit PIC18 microcontroller featuring 32KB Flash, 2KB SRAM, and 512 bytes EEPROM in a 14-pin TSSOP package. Operating at up to 64MHz, it integrates a 12-bit ADC with Computation (ADC2), dual 8-bit DACs, 16-bit PWMs, DMA, Configurable Logic Cells (CLC), and Core Independent Peripherals (CIPs). The wide 1.8V to 5.5V operating range makes it well-suited for both 3.3V and 5V systems. A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash/SRAM/EEPROM), and programmable peripherals. The PIC18 family is Microchip's mainstream 8-bit architecture, sitting between the smaller PIC16 and the 16-bit dsPIC33/PIC24 families in the broader PIC taxonomy (PIC16 -> PIC18 -> PIC24/dsPIC -> PIC32). The Q40 sub-family specifically targets real-time control and sensor applications through its hardware-based CIP blocks, reducing CPU overhead and improving deterministic response. Key differentiating features include 12 I/O pins with peripheral pin select (PPS), 16-bit PWM resolution suitable for digital power and motor control, and zero-cross detection for TRIAC-based solid-state relay control. The integrated 12-bit ADC2 with computation automates averaging, oversampling, and threshold detection, freeing the CPU from intensive math routines. Hardware CLCs allow glue-logic consolidation, replacing external gates on the PCB. Typical applications include LED lighting, BLDC motor control, sensor signal conditioning, capacitive touch sensing, real-time control loops, and low-cost consumer/IoT devices. In particular, the combination of 16-bit PWM, DMA, and zero-cross detection makes the Q40 family attractive for digital dimming and TRIAC-controlled AC loads. When designing with this device, ensure the ICSP programming pins (PGD/PGC) are not pulled low at reset. Decouple VDD/VSS with 100nF plus bulk capacitance, and follow Microchip AN2686 (Configuring the PIC18 Q40 Family) for oscillator and PPS settings. The TSSOP-14 footprint has a thermal resistance around 100 C/W, so high-current GPIO toggling should be balanced against junction temperature rise.

Cotización Contacto

PIC18F05Q41-E/ST

PIC18F05Q41-E/ST - 8-bit 64MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC18F05Q41-E/ST is a high-performance 8-bit PIC18 microcontroller IC featuring a 64MHz CPU, 32KB of Flash program memory, 2KB of SRAM, and 512 bytes of EEPROM, all housed in a 14-pin TSSOP (ST) package. The device integrates advanced analog peripherals including a 12-bit ADC with Computation (ADC2), an 8-bit DAC, an on-chip operational amplifier, and a 16-bit PWM, making it well suited for sensor and real-time control applications. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus and a Harvard or modified-Harvard architecture. PIC18 microcontrollers extend Microchip's PIC16 baseline with 16-bit program-word instructions, an enhanced 31-level stack, and linear data memory, which together simplify C-compiler code generation and enable interrupt-driven real-time control. The PIC18F05Q41 belongs to Microchip's PIC18-Q41 product family, which targets compact, high-performance designs where advanced analog integration reduces BOM count and board area. Key differentiating features include a 64MHz internal oscillator (16 MIPS instruction throughput), Peripheral Pin Select (PPS) for flexible signal routing, Direct Memory Access (DMA) controllers, and multiple serial interfaces (UART, SPI, I2C). The integrated op-amp and 12-bit ADC2 enable closed-loop analog signal conditioning without external components, which is particularly useful in small-footprint sensor interfaces. The PIC18F05Q41 is built on Microchip's enhanced mid-range core with hardware multiplier and C-friendly architecture, allowing efficient math operations in C while preserving the deterministic timing that 8-bit MCU users expect. The device supports low-power sleep modes and an on-board 32kHz oscillator for RTC-style timing, enabling battery-friendly designs in always-on sensor nodes. Typical applications include IoT sensor nodes, industrial control, smart home devices, LED lighting control, battery management systems, and consumer electronics. The wide operating voltage range and rich analog/mixed-signal integration make the device a strong candidate for designs that previously required multiple discrete components. When designing with this MCU, note the operating temperature grade encoded in the suffix: the -E variant supports the extended industrial grade of -40C to +125C, while the -I variant supports -40C to +85C. Use the -E variant for harsh-environment or automotive-adjacent designs that exceed standard commercial ranges. Proper decoupling with 100nF + bulk capacitors placed close to VDD/AVDD pins is essential for ADC2 accuracy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for sourcing, replacement, and PCB-layout decisions.

Cotización Contacto

PIC18F05Q41-I/ST

PIC18F05Q41-I/ST - 8-Bit 64MHz MCU, 32KB Flash | Microchip TSSOP-14

The Microchip Technology PIC18F05Q41-I/ST is an 8-bit PIC18 microcontroller running up to 64MHz with 32KB Flash, 2KB SRAM and 512 bytes EEPROM in a 14-pin TSSOP package. It integrates advanced analog peripherals including a 12-bit ADC, 8-bit DAC, operational amplifiers and 16-bit PWM, making it a compact mixed-signal MCU for sensor and real-time control designs. Industrial temperature range -40C to +85C and 1.8V to 5.5V supply operation suit battery-powered and industrial environments. An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data path, on-chip Flash program memory, SRAM, EEPROM, and integrated peripherals. The PIC18 family sits within Microchip's PIC microcontroller hierarchy (PIC16 -> PIC18 -> dsPIC), offering higher performance, more memory, and richer peripherals than baseline PIC16 while remaining simpler than 16-bit dsPIC devices. The 'Q41' sub-family emphasizes advanced analog integration for sensor and signal-chain applications. Key features of the PIC18F05Q41-I/ST include a 64MHz internal oscillator, 12-bit ADC with computation (ADC2), 8-bit DAC, on-chip operational amplifiers, 16-bit PWM with complementary outputs, and Configurable Logic Cells (CLC). DMA support offloads data movement between peripherals and memory, while the Core Independent Peripherals (CIPs) enable deterministic real-time responses without CPU intervention. These features reduce external component count for sensor conditioning and motor-control loops. Architecturally, the device uses Microchip's enhanced 8-bit RISC core with a hardware multiplier, single-cycle multiplication support, and a 16-bit instruction path for improved code density. The advanced analog block includes zero-cross detection, slope compensation, and dedicated op-amps with rail-to-rail inputs, enabling direct interfacing with current shunts, thermistors, and bridge sensors without external signal conditioning. Typical applications include IoT sensor nodes, consumer appliance control, low-end BLDC motor drives, LED lighting controllers, battery management front-ends, and HVAC sensor hubs. The combination of small TSSOP-14 footprint and integrated analog suits space-constrained designs. When designing with this device, pay attention to the pin-limited 14-TSSOP package: careful pin assignment is critical because the same pins are multiplexed across ADC, PWM, and communication functions. Always verify the pin mux in MPLAB X IDE before committing the PCB layout. This page synthesizes distributor pricing, drop-in PIC18 alternates, and practical design notes that go beyond the manufacturer datasheet summary.

Cotización Contacto

PIC18F05Q41T-I/SL

PIC18F05Q41T-I/SL - 8-bit 64MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC18F05Q41T-I/SL is a compact, high-performance 8-bit PIC18 microcontroller IC operating at up to 64 MHz with 32 KB (32K x 8) of Flash program memory, housed in a 14-pin SOIC (SL) package. The device integrates 2 KB of SRAM and 512 bytes of EEPROM, providing ample headroom for application code, data buffering, and parameter storage in space-constrained sensor and real-time control designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (typically Flash), working RAM, and a rich set of peripheral interfaces (ADC, timers, communication controllers, GPIOs). It sits in the embedded-system hierarchy below an MPU/MPSoC and above discrete logic; in the PIC architecture, the PIC18 family is Microchip's mainstream 8-bit line with an enhanced instruction set, hardware multiplier, and C-friendly architecture, making it suitable for replacing legacy PIC16 designs with more memory and peripherals. Key features of the PIC18F05Q41 include an on-chip operational amplifier, a 12-bit ADC2 with computation, an 8-bit DAC, a 16-bit PWM, peripheral pin select (PPS), DMA, and configurable communication peripherals including UART, SPI, and I2C. The combination of on-chip analog and digital peripherals allows single-chip sensor interface, signal conditioning, and closed-loop control without external components. The Q41 family uses Microchip's CIP (Core Independent Peripherals) approach, where peripherals can operate autonomously of the CPU via DMA and hardware state machines, freeing the core for higher-level application logic. The wide 1.8 V to 5.5 V operating range enables direct battery and 5 V system connection, while 16-bit PWM resolution supports fine-grained motor, lighting, and power-converter control. Typical applications include IoT sensor nodes, industrial process control, appliance motor control, LED lighting controllers, battery-powered smart sensors, and consumer white goods with human-machine interfaces. The 14-SOIC footprint offers hand-solder-friendly pin access and is well suited to small-batch prototyping. When designing with this part, take advantage of PPS to remap peripherals onto most GPIO pins, simplifying PCB routing, and use the on-chip op-amp to implement transimpedance or gain stages before the ADC, reducing external component count. This page synthesizes distributor availability, drop-in alternatives within the PIC18-Q41 family, and practical design notes not consolidated in the manufacturer datasheet.

Cotización Contacto

PIC18F05Q41T-I/ST

PIC18F05Q41T-I/ST - 8-Bit 64MHz MCU, 32KB Flash, 14-TSSOP

The Microchip Technology PIC18F05Q41T-I/ST is an 8-bit PIC18 microcontroller IC running at 64 MHz, integrating 32 KB of Flash program memory, 2 KB of SRAM, and 512 bytes of EEPROM in a compact 14-pin TSSOP surface-mount package. According to the Microchip product family overview, the PIC18-Q41 family is positioned as a compact, high-performance platform with advanced analog peripherals aimed at sensor and real-time control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory, and peripherals on one die. The PIC18 family is Microchip's high-end 8-bit line, sitting between the baseline PIC10/12/16 family and the 16-bit dsPIC/PIC24 line in the broader PIC microcontroller taxonomy. Within power management and embedded control hierarchies, the PIC18F05Q41 belongs to the PIC18-Q41 sub-family, which targets low-power, mixed-signal designs where op-amps, ADCs, DACs, and 16-bit PWMs are needed alongside a deterministic 8-bit core. Key features of the PIC18F05Q41 include an on-chip operational amplifier, a 12-bit ADC with Computation (ADC2), an 8-bit DAC, a 16-bit PWM module, and configurable Peripheral Pin Select (PPS) for flexible I/O mapping. The device operates from 1.8 V to 5.5 V across an industrial -40 °C to +85 °C temperature range and supports I2C, SPI (x2) and UART (x2) serial interfaces with DMA capability, enabling low-CPU-overhead data movement. These features make it well-suited to mixed-signal sensor front-ends and tightly closed-loop control tasks. The PIC18-Q41 architecture pairs the standard PIC18 Harvard core with Core Independent Peripherals (CIPs) such as the CWG, NCO, and SMT timers, allowing complex sequencing to occur without CPU intervention. The combination of 32 KB self-programmable Flash, 256-byte data EEPROM emulation, and 2 KB SRAM provides ample headroom for state-machine firmware, while PPS lets designers remap digital peripherals onto nearly any I/O pin - useful when PCB routing constrains the layout. Typical applications include sensor signal conditioning, LED lighting control, low-power IoT edge nodes, and battery-powered instrumentation where the on-chip op-amp front-ends a sensor and the 12-bit ADC2 digitizes the result. In motor-control and power-conversion tasks, the 16-bit PWM and configurable dead-time make it a fit for small brushed or stepper drive stages. When designing with this MCU, plan the I/O mapping around PPS early - reassigning peripherals later can require re-routing. The wide 1.8 V to 5.5 V supply range lets a single part run from either a single-cell Li-ion or a regulated 3.3 V / 5 V rail, simplifying BOM across product variants. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the Microchip PIC18-Q41 family overview and the verified distributor listings - information not bundled in the manufacturer datasheet alone.

Cotización Contacto

PIC18F06Q40-E/SL

PIC18F06Q40-E/SL - 8-bit 64MHz 64KB Flash MCU | Microchip

The Microchip Technology PIC18F06Q40-E/SL is an 8-bit RISC microcontroller from the PIC18-Q40 product family, featuring a high-performance PIC18 CPU core operating at up to 64 MHz with 64 KB of Flash program memory and 4 KB of SRAM, housed in a 14-pin SOIC (SL) package. It integrates 512 bytes of EEPROM, a 12-bit ADC with Computation (ADC2), two 8-bit DACs, multiple communication peripherals (I2C/SPI/UART), and configurable 16-bit PWM modules designed for real-time control and sensor-interface applications. An 8-bit PIC microcontroller is a compact Harvard-architecture processor that executes a RISC instruction set, providing deterministic timing and simple peripheral integration for embedded control. Within the broader semiconductor hierarchy, PIC MCUs sit under microcontrollers (MCUs) -> embedded processors -> digital ICs. The PIC18 sub-family specifically targets applications requiring more computational headroom, larger memory, and richer analog peripherals than PIC16 devices, while retaining the small pin-count and ease-of-use advantages of the PIC ecosystem. Key specifications include 64 MHz maximum CPU clock (16 MIPS performance), 12-bit ADC with computation features for automated averaging and threshold detection, dual 8-bit DAC outputs for reference generation or analog biasing, 16-bit PWM with complementary outputs, and 5V/3.3V operation across an extended industrial temperature range. The 14-pin SOIC footprint provides a compact, hand-solderable package suitable for both prototype and volume production. Typical applications include closed-loop sensor conditioning, LED lighting drivers, low-end motor control (small DC fans, BLDC commutation assistance), appliance user-interface controllers, battery-powered IoT sensor nodes, and digital power-supply housekeeping. The integrated ADC2 and DAC peripherals enable single-chip sensor-signal chains with minimal external analog circuitry. When designing with this part, ensure the configuration words are correctly set for oscillator source and code protection, and that the unused pins are explicitly configured as outputs or inputs with pull-ups to minimize current consumption. The 64 KB Flash and 4 KB SRAM are well-suited to mid-size firmware stacks using MPLAB XC8 and the MPLAB Code Configurator peripheral libraries.

Cotización Contacto

PIC18F06Q40-E/ST

PIC18F06Q40-E/ST - 64KB Flash 8-bit MCU, 14-TSSOP | Microchip

The Microchip Technology PIC18F06Q40-E/ST is an 8-bit PIC18 microcontroller delivering 64 MHz CPU performance, 64 KB of Flash program memory, and 4 KB of SRAM, housed in a 14-pin TSSOP package. It integrates Core Independent Peripherals (CIPs) including a 12-bit ADC with Computation, two 8-bit DACs, and 16-bit PWM channels, making it a compact solution for real-time control and sensor interface designs. What is a PIC18 microcontroller? The PIC18 family is Microchip's high-performance 8-bit microcontroller line, succeeding the PIC16 architecture with enhanced instruction set, larger memory addressing, and richer peripherals. PIC18F06Q40 belongs to the PIC18-Q40 sub-family, which targets space-constrained IoT, medical, and industrial designs by combining the legacy PIC18 core with modern CIPs. Within the broader taxonomy, PIC18 MCUs sit alongside PIC16 (mid-range) and PIC24/dsPIC (16-bit) families as foundational building blocks for embedded control. Key features include 64 KB self-programmable Flash, 4 KB SRAM, 512 bytes EEPROM, an internal 64 MHz oscillator, and a wide 1.8V to 5.5V operating voltage. The 12-bit ADC with Computation supports up to 200 ksps conversion rate with automated post-processing (averaging, oversampling, threshold comparison) that offloads CPU work. Two 8-bit DACs, configurable PWM, CWG, SMT, and UART/SPI/I2C peripherals round out the integration. Peripherals such as the Configurable Logic Cell (CLC) and Peripheral Pin Select (PPS) provide flexible signal routing at runtime. The PIC18F06Q40-E/ST uses the enhanced mid-range PIC18 core with a 16-bit instruction word and a 31-level hardware stack, executing most instructions in one instruction cycle (4 clock cycles). Its internal voltage regulator and high-frequency oscillator (HFINTOSC up to 64 MHz) simplify BOM by eliminating external clock components. The 14-pin TSSOP package keeps the design footprint under 30 mm². Typical applications include sensor conditioning, motor control loops, IoT edge nodes, LED lighting drivers, and consumer white goods. The combination of small package, accurate ADC, and built-in DACs makes the device especially suitable for closed-loop control in industrial sensor modules. When designing, leverage MPLAB X IDE with XC8 compiler for code development. Use Microchip's MPLAB Code Configurator (MCC) to initialize CIPs graphically and minimize firmware overhead. Confirm that the E temperature grade (-40C to +125C) matches your deployment environment; the -I grade offers 0C to +85C only. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and application notes not found in the manufacturer datasheet alone, giving procurement and embedded engineers a single reference for the PIC18F06Q40-E/ST.

Cotización Contacto

PIC18F06Q40-I/SL

PIC18F06Q40-I/SL - 8-bit 64MHz 64KB Flash MCU | Microchip

The Microchip PIC18F06Q40-I/SL is an 8-bit PIC18 microcontroller built on the high-performance PIC18-Q40 family, running up to 64MHz and integrating 64KB of Flash program memory, 4KB of SRAM, and 512 bytes of EEPROM in a 14-pin SOIC package. The "I" suffix denotes the industrial temperature grade of -40C to +85C, and the "SL" package code designates the narrow-body 14-SOIC 150-mil footprint optimized for cost-sensitive designs. Core peripherals include a 12-bit ADC with Computation (ADC2), two 8-bit DACs, 16-bit PWM modules, configurable logic cells (CLC), and zero-cross detection, making it well suited for real-time control and sensor-interface applications. A microcontroller is a single-chip computer that integrates a CPU core, program and data memory, and configurable peripherals onto one die. The PIC18 family uses a modified Harvard architecture with an enhanced 8-bit RISC instruction set, 31-level stack, and hardware multiplier, occupying a middle tier in the taxonomy microcontroller -> embedded MCU -> integrated circuit -> semiconductor. The PIC18-Q40 specifically targets low-pin-count, low-cost designs in the 14-/20-pin segment. Key features include a 12-bit differential ADC2 with up to 140 ksps conversion rate, two 8-bit DACs for setpoint generation, 16-bit PWM with center-aligned and complementary output modes, and dedicated peripherals such as CLC, NCO, and DSM for signal conditioning without external logic. The device supports serial connectivity via I2C, SPI, and UART/USART plus LIN-bus master mode, and is supported by the MPLAB X IDE, MCC code generator, and XC8 compiler toolchain. Architecturally, the PIC18F06Q40 integrates Core Independent Peripherals (CIPs) that execute deterministic functions without CPU intervention, reducing firmware complexity and improving real-time response. The 64MHz internal oscillator with 4x PLL enables 16 MIPS throughput while an internal 32kHz oscillator supports low-power sleep modes. Typical applications include LED lighting controls, BLDC/PMSM ceiling-fan motor control, sensor-signal conditioning front-ends, IoT edge nodes, and small home appliances. Compact 14-pin packaging suits space-constrained PCBs where a Cortex-M0+ would be over-spec and a smaller PIC16 would lack CIP richness. When designing, reserve pins RA0/RA1 for the high-speed ADC to avoid signal-integrity loss, and follow Microchip's AN2944 layout guide for analog/digital ground separation. The internal 64MHz HFINTOSC typically eliminates the need for an external crystal, simplifying BOM and reducing cost. This page consolidates distributor pricing, drop-in alternatives, and practical design notes that are not present in the manufacturer datasheet, helping procurement and embedded engineers evaluate the PIC18F06Q40-I/SL quickly.

Cotización Contacto

PIC18F06Q40-I/ST

PIC18F06Q40-I/ST - 64KB Flash 8-bit MCU | Microchip | TSSOP-14

The Microchip PIC18F06Q40-I/ST is an 8-bit PIC microcontroller from the PIC18-Q40 family, offering 64KB Flash, 4KB SRAM, and 512B EEPROM in a 14-pin TSSOP package. It operates up to 64MHz and is built around Microchip's enhanced mid-range core with a hardware multiplier, delivering up to 16 MIPS while supporting 1.8V to 5.5V operation. The device integrates a 12-bit ADC with Computation (ADC^2) for automated signal averaging, two 8-bit DACs, configurable logic cells (CLC), and Core Independent Peripherals (CIPs) such as the Complementary Waveform Generator (CWG) and Numerically Controlled Oscillator (NCO). A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash/SRAM/EEPROM), and programmable peripherals. The PIC18 architecture belongs to the Modified Harvard 8-bit RISC family and sits within the broader category of embedded microcontrollers. The PIC18-Q40 sub-family specifically targets real-time control and sensor-interface applications by integrating analog peripherals, math accelerators, and CIPs that reduce CPU overhead and BOM cost. The 14-pin TSSOP package places this part in the small-outline surface-mount family, suitable for compact sensor nodes and space-constrained designs. Key differentiating features include the ADC^2 engine (automated oversampling, averaging, and threshold-comparison), two CLC blocks that let designers wire digital logic from on-chip peripherals without external glue, and a 32-bit CRC with memory scan for safety-critical firmware integrity checks. Communication options include I2C, SPI, UART with LIN support, and configurable IO. The on-chip 8-bit DACs and op-amp modules are useful for sensor excitation and bias generation. The device is designed for deterministic real-time control. Its interrupt structure supports hardware-priority levels, allowing time-critical peripheral events to preempt the main loop. The 16 MIPS throughput, combined with the CWG and PWM modules, suits motor, lighting, and switched-mode power control loops, while the ADC^2 reduces software complexity for sensor fusion. Typical applications include IoT sensor nodes, home-automation peripherals, battery chargers, LED lighting controllers, low-end BLDC fan drivers, small appliance control boards, and HVAC sensor interfaces. Automotive-grade variants (PIC18F06Q40-E/ST) are available for under-hood and cabin electronics requiring higher temperature tolerance. When designing with this MCU, reserve the ADC channels first, since the 14-pin TSSOP exposes a limited number of dedicated analog pins. Use the internal FVR as the ADC reference to reduce external component count, and verify interrupt priorities against your real-time deadline budget before locking the firmware architecture. This page synthesizes distributor pricing across multiple sources, pin-compatible drop-in alternatives from the same PIC18-Q40 family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC18F06Q40T-I/SL

PIC18F06Q40T-I/SL - 8-Bit 64MHz MCU 64KB Flash 14-SOIC | Microchip

The Microchip Technology PIC18F06Q40T-I/SL is an 8-bit PIC18 microcontroller running at up to 64 MHz, integrating 64 KB of Flash, 4 KB of SRAM, and 512 bytes of EEPROM in a 14-pin SOIC package. It belongs to the PIC18-Q40 family, a compact high-performance product line aimed at real-time control and sensor-driven designs. Core peripherals include a 12-bit ADC with Computation (ADC2), two 8-bit DACs, and a 16-bit PWM module with complementary outputs and center-aligned capability. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory, working RAM, data EEPROM, and on-chip peripherals such as ADC, DAC, timers, PWM, and communication interfaces. PIC18F MCUs use Microchip's enhanced Harvard architecture and modified RISC instruction set, positioning them within the broader taxonomy: MCU -> 8-bit MCU -> PIC18 -> PIC18F -> PIC18-Q40. The Q40 sub-family specifically targets analog-intensive closed-loop control with built-in op-amp-style analog peripherals and digital signal conditioning that reduce the need for external components. Key features include 64 KB self-programmable Flash with device information area, 4 KB SRAM supporting hardware multiplier operations, and 512 bytes of EEPROM for non-volatile user data. Communication options include UART, SPI, and I2C, while the 12-bit ADC2 with computation engine supports automated averaging, oversampling, and threshold comparisons - reducing CPU overhead in sensor applications. Two 8-bit DACs and one 16-bit PWM with multiple modes support motor, lighting, and power-supply control loops. The 14-pin SOIC package provides a small footprint suitable for compact designs while exposing five ADC channels, two DAC outputs, PWM outputs, and standard communication pins. CIP (Core Independent Peripherals) such as CWG, NCO, and the CRC scanner further offload the CPU, enabling deterministic response times even under heavy interrupt load. Typical applications include sensor signal conditioning, LED lighting control, closed-loop fan or small motor control, appliance user interfaces, and IoT edge nodes. The 16-bit PWM and dual DACs also support cost-sensitive power-conversion and battery-management tasks. When designing with the PIC18F06Q40T-I/SL, ensure the decoupling network uses a 100 nF ceramic capacitor on VDD and a bulk capacitor (typically 10 uF) near the IC. Programming and debugging are supported via ICSP (In-Circuit Serial Programming) on PGED/PGEC pins and the MPLAB ICD tools. The -I grade supports -40C to +85C operation, suitable for industrial environments. This page synthesizes distributor pricing, drop-in alternatives from the same Microchip family, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC18F06Q40T-I/ST

PIC18F06Q40T-I/ST - 8-Bit MCU, 64KB Flash, 64MHz, 14-TSSOP | Microchip

The Microchip Technology PIC18F06Q40T-I/ST is an 8-bit PIC18 microcontroller featuring 64KB of Flash program memory, 4KB of SRAM, and 512 bytes of EEPROM, executing instructions at up to 64MHz from a 1.8V to 5.5V supply in a 14-pin TSSOP package. The part is qualified to the -40C to +85C industrial temperature range, comes in tape-and-reel packaging, and integrates peripherals designed for real-time control and sensor-interface applications. An 8-bit microcontroller (MCU) is a compact, single-chip computer built around an 8-bit data path. It belongs to the microcontroller family, itself a subcategory of microprocessors and embedded computing. 8-bit MCUs such as the PIC18 series remain widely deployed in cost-sensitive, deterministic control applications where predictable interrupt latency, low power, and ease of use outweigh the throughput of 32-bit devices. The PIC18 line specifically extends Microchip's legacy PIC16 architecture with a larger 16-bit instruction word, linear memory model, hardware multiplier, and C-friendly compiler support, occupying a tier between simple PIC16 parts and high-end dsPIC/PIC32 devices. Key features of the PIC18F06Q40 include a 12-bit ADC with Computation (ADC2) for automated averaging, threshold detection and oversampling, two 8-bit DAC outputs, a 16-bit PWM module, DMA, Peripheral Pin Select (PPS) for flexible signal routing, and standard serial interfaces (UART, SPI, I2C). The integrated 12-bit ADC2 with up to 12 channels reduces external signal-conditioning parts, while PPS allows designers to remap digital peripherals to almost any I/O pin, easing PCB layout. The device targets real-time control and sensor-interface designs: motor and lighting control loops, IoT end nodes, white-goods HMIs, battery-powered sensor hubs, and industrial sensor-conditioning front ends. Designers migrating from smaller PIC16F or PIC18F/K parts can move to the Q40 family to gain ADC2 automation, DMA, and PPS without changing toolchains, since the part is supported by MPLAB X IDE, XC8 compilers, and the MPLAB Code Configurator (MCC). For new designs, place a 100nF decoupling capacitor close to VDD, respect the 1.8V to 5.5V supply range, and configure unused pins as outputs low to minimize current draw. The TSSOP-14 footprint allows hand-soldering-friendly prototypes but also supports standard reflow profiles for volume assembly. This page consolidates distributor pricing, package-level drop-in alternatives, and design notes that go beyond what the manufacturer datasheet alone provides, helping engineers compare, qualify, and source the part efficiently.

Cotización Contacto

PIC18F06Q41-E/SL

PIC18F06Q41-E/SL - 64KB Flash 8-bit MCU, 14-SOIC | Microchip

The Microchip PIC18F06Q41-E/SL is a compact, high-performance 8-bit PIC18 microcontroller with 64KB Flash, 4KB RAM, and 512B EEPROM, running at up to 64MHz in a 14-pin SOIC package. It belongs to the PIC18-Q41 family, an analog-focused product line targeting sensor and real-time control applications, and integrates advanced peripherals including a 12-bit ADC with Computation (ADCC), two 8-bit DACs, an on-chip operational amplifier, 16-bit PWM, and configurable logic. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), non-volatile storage (EEPROM), and a rich set of peripherals (ADC, timers, communication ports, PWMs) onto one package. Within the MCU hierarchy, the PIC18F06Q41 belongs to the 8-bit microcontroller class (vs. 16-bit dsPIC or 32-bit ARM Cortex-M0/M4), which prioritizes deterministic real-time response, low cost, and ease of programming over raw throughput. The PIC18-Q41 family specifically layers analog-domain features (12-bit ADCC, on-chip op-amp, dual 8-bit DACs) on top of the classic PIC18 RISC core, making it a superset of the broader PIC microcontroller line. Key features of the PIC18F06Q41-E/SL include 64KB self-programmable Flash, 4KB SRAM, 512B EEPROM, a 64MHz internal oscillator, a 12-bit ADC with Computation supporting capacitive voltage divider (CVD), two 8-bit DACs, an on-chip op-amp, four 16-bit PWMs, multiple communication peripherals (UART, SPI, I2C), and up to 12 I/O pins in this 14-pin SOIC variant. The integrated op-amp enables small-signal conditioning without external analog components, while the ADCC automates averaging, oversampling, and threshold comparison to offload the CPU. Technically, the PIC18F06Q41 uses Microchip's enhanced mid-range 8-bit RISC core with a 16-bit instruction word, single-cycle execution for most instructions, and a hardware multiplier. The device supports wide operating voltages from 1.8V to 5.5V, multiple clock sources (internal 64MHz HFINTOSC, external crystal, and low-power LFINTOSC), and CIP (Core Independent Peripherals) that allow tasks such as signal generation, conversion, and timing to run without CPU intervention - critical for low-power sensor nodes. Typical applications include capacitive touch sensing, sensor signal conditioning, LED lighting control, battery-powered IoT end nodes, small motor and fan control, and medical or industrial sensor front-ends. The high level of analog integration is particularly valuable in space-constrained designs where external op-amps and ADCs would push BOM cost and PCB area beyond budget. When designing with this device, plan pin allocation carefully because the 14-SOIC variant exposes only 12 I/O pins; for designs requiring more I/O, consider the 20-pin SOIC/SSOP variant (PIC18F16Q41). Also budget for proper decoupling (100nF plus 1uF) close to VDD/VSS, and verify the ADC reference voltage against your sensor output range to avoid gain errors. This page synthesizes distributor pricing, parametric alternatives, and design considerations for the PIC18F06Q41-E/SL that are not collected in any single manufacturer document, helping procurement teams and design engineers evaluate the part with maximum context.

Cotización Contacto

PIC18F06Q41-I/ST

PIC18F06Q41-I/ST - 64KB Flash 8-bit MCU 14-TSSOP | Microchip

The Microchip Technology PIC18F06Q41-I/ST is a compact 8-bit PIC18 microcontroller from the PIC18-Q41 family, delivering 64KB Flash, 4KB SRAM and 512B EEPROM in a 14-pin TSSOP package. It integrates a 12-bit ADC with Computation (ADCC), two 8-bit DAC modules, an on-chip operational amplifier, and 16-bit PWM peripherals tuned for sensor and real-time control loops. An 8-bit microcontroller (MCU) is a microprocessor whose data path, registers, and ALU operate on 8 bits at a time; it sits inside the broader taxonomy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. 8-bit MCUs are favored for cost-sensitive, deterministic, low-power applications because the CISC-style PIC18 instruction set keeps interrupt latency short and code density high, while the Q41 family layers modern analog and CIP (Core Independent Peripheral) blocks onto the legacy architecture. Key features include 64MHz operation (16 MIPS), 12-bit ADCC with up to 22 channels (shared with package pins), two 8-bit DACs, an on-chip op-amp, configurable logic cells, multiple 16-bit PWMs with complementary outputs, and CIP peripherals that automate capacitive voltage divider (CVD) touch sensing without CPU intervention. Memory-protection, hardware limit timers, and math accelerators further reduce firmware load. The Q41 silicon uses a CIP-rich architecture that lets peripherals (ADC, PWM, op-amp, CLC) cooperate without waking the CPU, enabling deterministic sub-microsecond control loops in motor, lighting, and sensor-conditioning designs. The 12-bit ADCC oversampling/threshold block performs averaging and decision logic in hardware, allowing unattended sensor polling at very low average current. Typical applications include capacitive touch user interfaces, LED lighting drivers, sensor signal conditioning, low-cost motor control (BLDC/PMSM FOC with external gate drivers), battery-powered IoT edge nodes, and small home appliances. The integrated op-amp plus dual DAC lets a single MCU implement analog front-end plus actuator drive. When designing with this part, note that the 14-pin TSSOP exposes a limited I/O count (about 12 usable GPIO once programming and crystal pins are reserved), so plan pin assignments before schematic capture. Always use the latest PIC18-Q41 family programming spec and errata before locking production firmware. This page synthesizes verified distributor pricing, drop-in TSSOP-14 alternatives from the same PIC18-Q41 family, and practical design notes not found in the standalone datasheet PDF.

Cotización Contacto

PIC18F06Q41T-I/SL

PIC18F06Q41T-I/SL - 8-bit 64MHz MCU 64KB Flash 14-SOIC | Microchip

The Microchip Technology PIC18F06Q41T-I/SL is an 8-bit PIC18 microcontroller running up to 64 MHz with 64 KB Flash, 4 KB SRAM and 512 bytes EEPROM, housed in a 14-pin SOIC package. It belongs to the PIC18-Q41 family, which combines a high-performance PIC18 core with Core Independent Peripherals (CIPs) and advanced analog blocks for sensor and real-time control designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and a configurable set of peripherals such as timers, ADC, DAC, communication interfaces and CIPs. PIC18F devices sit at the top of Microchip's 8-bit portfolio with an enhanced instruction set, 16-bit-wide instruction path and vectored interrupt architecture, while the Q41 sub-family layers analog-rich peripherals on top of this core. Key features of the PIC18F06Q41T-I/SL include a 12-bit ADC with Computation (ADCC), two 8-bit DACs, a 16-bit PWM module, an on-chip operational amplifier, zero-cross detection, a hardware limit timer and Configurable Logic Cell (CLC) blocks. CIPs allow AD conversion, threshold comparison and signal generation without CPU intervention, easing deterministic firmware in motor, lighting and sensor-interface products. The part operates from 1.8 V to 5.5 V VDD, supports up to 64 MHz internal or external clocking, and offers multiple low-power modes (Doze, Idle and Sleep with <100 nA typical). Integrated DMA and vectored interrupts keep latency predictable when the analog front-end and PWM are active simultaneously, which is critical for tight-loop control. Typical applications include LED lighting drivers, BLDC/PMSM motor control, sensor signal conditioning, industrial control loops, medical wearables, IoT end-nodes, and battery-powered instrumentation. The 14-SOIC footprint makes it attractive where PCB area is constrained but analog performance is non-negotiable. When designing with this device, mind the 14-pin pinout: only one dedicated I/O port is available, so prioritizing which peripherals map to which pins is essential during schematic capture. Always refer to the Microchip PIC18F06/16Q41 datasheet for pin muxing, IDDx limits and programming/debug interface requirements. This page synthesizes distributor pricing, drop-in alternatives and engineering notes that go beyond the manufacturer datasheet, helping procurement and design engineers converge on the right 8-bit MCU faster.

Cotización Contacto

PIC18F06Q41T-I/ST

PIC18F06Q41T-I/ST - 8-bit 64MHz MCU 64KB Flash | Microchip

The Microchip Technology PIC18F06Q41T-I/ST is an 8-bit PIC18 microcontroller operating at up to 64MHz, integrating 64KB of Flash program memory, 4KB SRAM, and 512 bytes of EEPROM in a 14-pin TSSOP package. The device belongs to the analog-rich PIC18-Q41 family designed for sensor and real-time control applications, featuring a 12-bit ADC with Computation (ADCC) that automates Capacitive Voltage Divider (CVD) techniques, two 8-bit DAC modules, an on-chip operational amplifier, a 16-bit PWM, DMA, and configurable Peripheral Pin Select (PPS). An 8-bit microcontroller (MCU) is a microprocessor integrated with program memory, RAM, peripherals, and I/O on a single silicon die, using an 8-bit data path. Within the broader taxonomy, this PIC18 sits under microcontroller -> embedded controller -> digital IC -> semiconductor. The 8-bit class excels in deterministic real-time control, low power consumption, and low cost per unit, making it the preferred choice for appliance controls, sensor hubs, and human-interface designs where 32-bit performance is unnecessary. Key features include 64KB self-programmable Flash with 256-byte block erase, 4KB linear SRAM, 512 bytes EEPROM emulation, a 12-bit ADCC with up to 12 channels, two 8-bit DACs with rail-to-rail output, an integrated 5MHz op-amp, six 16-bit timers, DMA controller for peripheral-to-memory transfers, and three DMA channels. Communication peripherals include UART, SPI, and I2C, all routed via PPS to most I/O pins. The PIC18-Q41 architecture uses a modified Harvard structure with a 16-bit instruction word and an 8-bit data path, executed through a 2-stage pipeline. The on-chip op-amp enables single-supply signal conditioning without external analog ICs, while the ADCC supports hardware-averaged oversampling and threshold comparisons that offload CPU cycles. PPS allows remapping of digital peripherals to nearly any I/O, simplifying PCB layout. Typical applications include capacitive touch sensing using CVD, low-power sensor nodes, LED lighting controls with 16-bit PWM dimming, and small appliance controls such as coffee makers and fans. With the integrated op-amp, the device can directly interface with analog sensors, including thermistors and photodiodes, eliminating external signal-conditioning stages. When designing with this MCU, ensure VDDCORE decoupling (100nF plus 1uF) is placed within 2mm of the pin, route MCLR with a 10k pull-up, and use PPS to optimize PCB routing. For low-power operation, take advantage of the Sleep mode with peripheral wake-on-touch. This page synthesizes verified distributor pricing, drop-in alternative cross-references, and practical design notes that complement the manufacturer datasheet.

Cotización Contacto

PIC18F1220-E/P

PIC18F1220-E/P - 8-bit MCU 4KB Flash 16 I/O 18-DIP | Microchip

The Microchip Technology PIC18F1220-E/P is a high-performance 8-bit CMOS flash-based microcontroller with 4KB of program memory, 256 bytes of SRAM, and 128 bytes of EEPROM, housed in a 18-pin PDIP (DIP-18) through-hole package. It executes instructions at 200 ns (10 MIPS at 40 MHz) using the PIC18 RISC architecture and operates from 2.0V to 5.5V across the -40C to +125C industrial temperature range. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus and CISC/RISC core, integrating CPU, RAM, non-volatile program memory, peripherals and I/O on one die. The PIC18F1220 belongs to the PIC18 family -> PIC microcontrollers -> 8-bit microcontrollers -> microcontrollers -> integrated circuits (semiconductors). It targets applications needing deterministic real-time control with on-chip analog and serial peripherals. Key differentiating features of this device include 7 channels of 10-bit Analog-to-Digital conversion, an Addressable Universal Asynchronous Receiver Transmitter (AUSART) module, a Capture/Compare/PWM (CCP) peripheral, self-programming flash, ICD (In-Circuit Debug), and Microchip's nanoWatt advanced low-power modes with multiple oscillator options including a 31 kHz low-power secondary oscillator. These integrated peripherals eliminate most external components in typical embedded designs. Architecturally, the PIC18F1220 uses a 16-bit instruction word with an 8-bit data path and 21 interrupt sources, supporting linear program memory up to 2 MB via table reads. Its wide operating voltage (2.0V-5.5V) and 16 I/O pins with individual direction control make it suitable for both 3.3V and 5V designs, while the nanoWatt technology provides <1 uA sleep current for battery-powered applications. Typical applications include industrial control logic, sensor signal conditioning, low-power remote sensor nodes, automotive body and climate subsystems, and small appliance control panels. Its 16 I/O and 7 ADC channels cover most 8-bit embedded designs without external muxing. When designing with this part, route VDD/VSS pairs with low-ESR decoupling (100 nF plus 10 uF bulk) and keep analog signals short to AVss/Vdd. For low-power operation, use the nanoWatt sleep modes plus the 31 kHz secondary oscillator; do not exceed 40 MHz on Fosc to avoid oscillator-amplifier failure modes. This page synthesizes current distributor pricing, pin-compatible drop-in alternatives from the PIC18F family and cross-brand 8-bit MCU landscape, and practical design notes not aggregated in the manufacturer datasheet.

Cotización Contacto

PIC18F1220-E/SS

PIC18F1220-E/SS - 8-bit MCU, 4KB Flash, 25MHz, SSOP-20 | Microchip

The Microchip Technology PIC18F1220-E/SS is an 8-bit high-performance RISC microcontroller with 4KB (2K x 16) of Enhanced Flash program memory, 256 bytes of RAM, and 128 bytes of EEPROM, housed in a 20-pin SSOP package. It executes instructions in 200 ns at a 25 MHz clock and integrates 10-bit Analog-to-Digital conversion, AUSART, capture/compare/PWM, and nanoWatt low-power modes. An 8-bit microcontroller (MCU) is a small computer on a single integrated circuit that contains a CPU, RAM, non-volatile program memory, and peripherals. MCUs sit within the broader category of microcontrollers -> embedded processors -> semiconductors. The PIC18F1220-E/SS belongs to the PIC18 family, which combines a RISC core with Enhanced Flash memory to deliver 200 ns instruction execution while maintaining C-compiler-friendly architecture for efficient code development. It belongs to the wider product taxonomy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include seven channels of 10-bit A/D, self-programmability via ICSP, an internal oscillator option that can reduce BOM cost, and a 2.0V to 5.5V operating voltage range suited to battery-powered applications. Power consumption drops to as low as 0.1 microamp in standby. The device supports flash endurance of 100K cycles and EEPROM endurance of 1M cycles typical, giving long field-life in industrial control nodes. Architecturally, the PIC18F1220-E/SS uses a 16-bit wide instruction word with an 8-bit data path, a 31-level hardware stack, and an interrupt controller supporting both edge- and level-triggered sources. The AUSART block supports RS-232/RS-485 asynchronous links, while the CCP module generates PWM for motor or LED control, all inside a compact 20-pin SSOP outline. Typical applications include low-power sensor nodes, battery management front-ends, small motor control, white-goods user interfaces, and remote-control peripherals where the wide 2.0-5.5V supply range and nanoWatt sleep modes extend operating life from coin cells or two-AA stacks. Designers also use it as a cost-down companion to larger PIC18F parts in cost-sensitive consumer goods. When designing, choose the 'E' (Extended) temperature grade -40C to +125C variant for outdoor or industrial enclosures. Provide a 100 nF decoupling capacitor close to VDD, route the MCLR line away from switching traces to avoid spurious resets, and verify ICSP pins (RB6/RB7) are not loaded by external pull-ups that would block in-circuit programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

Subcategorías

Productos (35281)

PIC18F04Q41-E/SL - 16KB Flash 8-bit MCU | Microchip

PIC18F04Q41-I/SL - 8-Bit 64MHz MCU, 16KB Flash | Microchip

PIC18F04Q41-I/ST - 8-bit 64MHz 16KB Flash MCU, TSSOP-14 | Microchip

PIC18F05Q40-E/SL - 8-bit 64MHz 32KB Flash MCU | Microchip

PIC18F05Q40-E/ST - 32KB Flash, 64MHz 8-bit MCU | Microchip

PIC18F05Q40-I/SL - 32KB Flash 8-bit MCU, 64MHz, 14-SOIC | Microchip

PIC18F05Q40T-I/SL - 32KB Flash 8-bit MCU, 64MHz, 14-SOIC | Microchip

PIC18F05Q40T-I/ST - 32KB Flash 8-bit MCU, 64MHz | Microchip

PIC18F05Q41-E/ST - 8-bit 64MHz 32KB Flash MCU | Microchip

PIC18F05Q41-I/ST - 8-Bit 64MHz MCU, 32KB Flash | Microchip TSSOP-14

PIC18F05Q41T-I/SL - 8-bit 64MHz 32KB Flash MCU | Microchip

PIC18F05Q41T-I/ST - 8-Bit 64MHz MCU, 32KB Flash, 14-TSSOP

PIC18F06Q40-E/SL - 8-bit 64MHz 64KB Flash MCU | Microchip

PIC18F06Q40-E/ST - 64KB Flash 8-bit MCU, 14-TSSOP | Microchip

PIC18F06Q40-I/SL - 8-bit 64MHz 64KB Flash MCU | Microchip

PIC18F06Q40-I/ST - 64KB Flash 8-bit MCU | Microchip | TSSOP-14

PIC18F06Q40T-I/SL - 8-Bit 64MHz MCU 64KB Flash 14-SOIC | Microchip

PIC18F06Q40T-I/ST - 8-Bit MCU, 64KB Flash, 64MHz, 14-TSSOP | Microchip

PIC18F06Q41-E/SL - 64KB Flash 8-bit MCU, 14-SOIC | Microchip

PIC18F06Q41-I/ST - 64KB Flash 8-bit MCU 14-TSSOP | Microchip

PIC18F06Q41T-I/SL - 8-bit 64MHz MCU 64KB Flash 14-SOIC | Microchip

PIC18F06Q41T-I/ST - 8-bit 64MHz MCU 64KB Flash | Microchip

PIC18F1220-E/P - 8-bit MCU 4KB Flash 16 I/O 18-DIP | Microchip

PIC18F1220-E/SS - 8-bit MCU, 4KB Flash, 25MHz, SSOP-20 | Microchip