Circuitos integrados

PIC24FJ64GU205-I/M4

PIC24FJ64GU205-I/M4 - 16-bit USB MCU, 64KB Flash, 48-UQFN | Microchip

The Microchip Technology PIC24FJ64GU205-I/M4 is a 16-bit microcontroller from the PIC24F family, integrating 64 KB of ECC Flash and 8 KB of RAM, and operating at up to 32 MHz (16 MIPS) in a 48-pin UQFN (6x6) package. It is part of the PIC24FJ GU2 family, which adds a full-speed USB 2.0 device controller with on-chip transceiver to the eXtreme Low-Power (XLP) platform, enabling connected embedded designs without an external PHY. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), peripherals, and I/O. The PIC24F family uses a 16-bit modified Harvard architecture with single-cycle instruction execution, providing higher code density and throughput than typical 8-bit MCUs while retaining low power consumption. Within Microchip's portfolio, the PIC24FJ GU2 sub-family is positioned for low-pin-count USB applications such as human-interface devices, portable instrumentation, and consumer peripherals. Key features include eXtreme Low-Power (XLP) technology with multiple power-saving modes (Sleep, Deep Sleep, Retention), a 16-channel 10-bit ADC, multiple communication peripherals (UART, SPI, I2C), and four 16-bit timers. The integrated USB 2.0 Full-Speed device with on-chip transceiver eliminates external PHY components, reducing BOM cost and PCB area. The device operates from 2.0V to 3.6V across an industrial -40C to +85C temperature range, with 38 available I/O pins for user applications. Architecturally, the PIC24FJ64GU205 uses Microchip's nanoWatt XLP design methodology, achieving currents under 1 uA in Deep Sleep while retaining RAM. The 16-bit datapath, 24-bit instruction word, and hardware multiply/divide make it well-suited to DSP-like filtering on sensor data without offloading to a DSP. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), portable medical accessories, low-power wireless sensor nodes, USB-to-UART bridges, and consumer electronics with USB charging monitoring. The combination of USB, low power, and small footprint makes it attractive for wearable and battery-powered products. Design considerations include careful USB PCB layout (90-ohm differential impedance on D+/D-, common-mode choke, ESD protection), decoupling capacitor placement, and use of the on-chip 8 MHz internal oscillator with PLL to minimize external components. Migration between package options (UQFN-48, TQFP-48, QFN-48) within the family is supported through pin-compatible variants. This page synthesizes authorized distributor pricing, drop-in compatible alternatives within the PIC24FJ family, and practical USB layout guidance not always covered in the datasheet.

Cotización Contacto

PIC24FJ64GU205-I/PT

PIC24FJ64GU205-I/PT - 16-bit 32MHz 64KB Flash USB MCU | Microchip

The Microchip PIC24FJ64GU205-I/PT is a 16-bit eXtreme Low-Power (XLP) microcontroller IC running at up to 32 MHz (16 MIPS), integrating 64 KB of ECC Flash (22K x 24) and 8 KB of RAM in a 48-pin TQFP (7x7 mm) surface-mount package. It belongs to the PIC PIC® 24F family with integrated USB 2.0 full-speed support, targeting space-constrained, low-power, USB-connected embedded designs. The part carries the -I (industrial) temperature grade and ships in the /PT TQFP-48 variant. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (RAM), and a rich set of peripherals (ADC, timers, communication interfaces, I/O). The PIC24FJ family sits in the 16-bit MCU hierarchy between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices, offering higher performance than 8-bit cores while keeping deterministic interrupt latency and a simple C-friendly instruction set. eXtreme Low-Power (XLP) technology is Microchip's branding for nanoWatt-class sleep modes that allow battery-powered products to extend operating life. Key features of the PIC24FJ64GU205 include integrated USB 2.0 full-speed transceiver and PHY (eliminating an external USB PHY), 64 KB Flash with Error-Correcting Code for improved reliability, 8 KB SRAM, multiple low-power sleep modes down to nanoWatt levels, multiple 16-bit timers, and a 10/12-bit ADC. The 48-pin TQFP package provides more I/O than smaller QFN/SSOP variants of the same family while remaining compatible with hand-soldered prototype boards. Architecturally, the PIC24FJ64GU205 uses the Microchip 16-bit modified Harvard core with a 24-bit instruction word and 16-bit data path, allowing single-cycle 16x16 MAC operations. The on-chip regulator supports 2.0–3.6 V single-supply operation, simplifying battery designs. Typical applications include USB HID devices, USB data loggers, portable medical monitors, consumer electronics with USB charging/communication, and low-power sensor nodes. The combination of integrated USB and XLP makes it particularly attractive for self-powered USB peripherals. When designing with this MCU, ensure the USB D+/D− traces are routed as a 90 Ω differential pair, the VUSB pin has the correct decoupling, and the integrated 3.3 V regulator output is bypassed per the manufacturer's guidelines. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC24FJ64GU205T-I/M4

PIC24FJ64GU205T-I/M4 - 16-bit MCU, 64KB Flash, USB | Microchip

The Microchip Technology PIC24FJ64GU205T-I/M4 is a 16-bit eXtreme Low-Power PIC microcontroller with 64KB ECC Flash and 8KB RAM, packaged in a 48-pin UQFN (M4) 6x6 mm tape-and-reel format and rated for the -40C to +85C industrial temperature range. It integrates a Full-Speed USB 2.0 Host/Device/OTG interface together with a 12-bit 400 Ksps ADC, three analog comparators and several Core Independent Peripherals (CIPs) that offload tasks from the CPU. The CPU core is a 16-bit modified-Harvard architecture running at up to 32 MHz (16 MIPS), supported by an integrated sleep current in the few-hundred-nA range that makes the part well suited to battery-backed applications. The PIC24FJ family is a 16-bit microcontroller line from Microchip positioned between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families. Within the 16-bit MCU hierarchy it belongs to the eXtreme Low-Power (XLP) sub-family and the GP2/GU2 peripheral set, which together target portable, USB-connected, low-duty-cycle embedded products. The PIC24FJ64GU205 specifically is the highest-density member of the low-pin-count GP2/GU2 sub-family, giving designers the largest on-chip memory of that group while still fitting into packages as small as 48 pins. Key features of this part include hardware USB 2.0 Full-Speed On-The-Go support that eliminates external transceivers, ECC on Flash for improved reliability in safety-relevant firmware, multiple serial interfaces (I2C/SPI/UART) for sensor and peripheral expansion, and configurable 16-bit timers plus Capture/Compare/PWM modules for motor, lighting and signal-conditioning loops. The integrated 12-bit ADC and analog comparators remove the need for external signal conditioning on simple analog front ends. In the architecture itself, a wide datapath with modifier lanes handles 16-bit arithmetic and DSP-style operations more efficiently than an 8-bit core, while the XLP design techniques (deep-sleep modes, peripheral clock gating, retention RAM) keep average current draw low. The combination of hardware USB, ECC Flash and CIPs (such as CLC, MCCP and DMA-like blocks) lets firmware implement complex behaviours with very little CPU involvement. Typical applications for the PIC24FJ64GU205T-I/M4 include USB peripherals such as human-interface devices, CDC virtual COM ports and USB audio class devices, wearable health and fitness sensor hubs, low-power IoT sensor nodes with USB firmware-update channels, and industrial data loggers that need ECC Flash for long-term retention. The USB OTG capability also makes it a candidate for tablet- or phone-connected accessories. When designing around this MCU, allocate adequate decoupling on VDD/VUSB and follow Microchip's USB PCB layout rules for the D+/D- pair to remain USB-IF compliant; designers should also size the LDO or battery source to handle the inrush when the USB transceiver starts up. This page consolidates distributor pricing, drop-in alternatives and practical design notes that are not found in the manufacturer datasheet alone.

Cotización Contacto

PIC24FJ64GU205T-I/PT

PIC24FJ64GU205T-I/PT - 16-bit 32MHz 64KB Flash USB MCU TQFP-48

The Microchip Technology PIC24FJ64GU205T-I/PT is a 16-bit PIC24F microcontroller IC operating at up to 32 MHz with 64 KB (22K x 24) of ECC Flash program memory and 8 KB of SRAM, housed in a 48-pin TQFP (7x7 mm) package. It is part of the PIC24FJ 'GP2/GU2' family of eXtreme Low-Power (XLP) microcontrollers with integrated Full-Speed USB 2.0 Host/Device/OTG, designed for low-pin-count applications requiring USB connectivity and ultra-low power consumption. What is a PIC24F microcontroller? A PIC24F is a 16-bit modified Harvard RISC microcontroller from Microchip's PIC24 family, sitting in the product hierarchy: microcontroller (MCU) -> embedded processor -> semiconductor device. PIC24F parts are designed for general-purpose low-power embedded applications and feature Core Independent Peripherals (CIPs) that perform tasks in hardware without CPU intervention, reducing active time and overall system power. The 'FJ' suffix denotes the XLP (eXtreme Low-Power) family and Flash program memory. Key features include 16 MIPS performance at 32 MHz, a 12-bit 400 ksps ADC with up to 13 channels, three analog comparators, four 16-bit timers, configurable logic cells, multiple serial interfaces (I2C, SPI, UART), and a USB 2.0 Full-Speed transceiver with on-chip transceiver and internal pull-up. The device supports 1.8 V to 3.6 V operation with deep-sleep currents below 1 µA typical. The PIC24FJ64GU205T-I/PT is well suited for USB Human Interface Devices (HID), sensor hubs, medical sensor patches, fitness wearables, and low-power IoT nodes where USB connectivity and battery life are both required. The integrated USB transceiver eliminates the need for an external PHY, simplifying PCB layout. When designing with this device, allocate the VUSB and VBUS pins per datasheet recommendations and add 0.1 µF decoupling on each power pin. Configure PPS (Peripheral Pin Select) before enabling peripheral functions to avoid bus contention.

Cotización Contacto

PIC24FJ96GA006-I/MR

PIC24FJ96GA006-I/MR - 16-bit 16MHz 96KB Flash MCU | Microchip | 64-VQFN

The Microchip Technology PIC24FJ96GA006-I/MR is a 16-bit RISC microcontroller from the PIC24F family that integrates 96 KB of self-programmable Flash program storage (32K x 24 instruction words) and 8 KB of RAM into a 64-pin VQFN (9x9 mm) package with an exposed thermal pad. The device operates from 2.0 V to 3.6 V supply, supports up to 16 MIPS throughput at a 32 MHz internal oscillator, and provides 53 digital I/O lines plus advanced peripherals including a 10/12-bit ADC, comparators, UART, SPI, I2C and a Parallel Master Port. A PIC24F microcontroller is a 16-bit modified Harvard RISC device from Microchip's PIC24 family, the mid-range tier that sits between the 8-bit PIC18 and the 32-bit PIC32 in Microchip's MCU taxonomy (8-bit PIC -> 16-bit PIC24 -> 32-bit PIC32 -> 32-bit SAM ARM Cortex-M). PIC24F variants use a wide 24-bit instruction word and Harvard memory architecture with separate program Flash and SRAM buses, enabling single-cycle fetch with deterministic interrupt latency. The 'F' suffix denotes Flash program memory and the 'J' indicates a 3.3 V low-voltage part optimized for low-power battery applications, often branded as 'eXtreme Low Power' (XLP) technology. Key features include 16 MIPS throughput at 32 MHz, four 16-bit timers (or up to eight with the timer pair combiners), two UART modules, two SPI buses, two I2C buses, a 10-bit ADC with up to 16 channels at 500 ksps, and an RTCC with calendar mode. The integrated nanoWatt XLP technology lowers sleep current below 1 µA in deep sleep, and the CTMU peripheral enables capacitive-sensing for touch buttons or sliders without an external analogue front end. Technically the PIC24FJ96GA006 family is built on a CMOS process with a 16-bit datapath, hardware multiply/divide engine and a 16x16-bit register file of 32 Kwords. The Memory Protection Unit and Basic CodeGuard provide secure Flash partitioning for field firmware upgrades and bootloader isolation, and the device supports in-circuit serial programming (ICSP) plus JTAG boundary scan for manufacturing test. Typical applications include portable industrial data loggers, battery-powered sensor hubs, home automation gateways, USB-/CAN-enabled HMI panels, and low-power medical monitoring accessories. The 64-pin VQFN footprint exposes enough I/O to drive character or graphic LCDs, 4x4 keypads, and multiple SPI peripherals while leaving headroom for RTCC calendar retention from a coin cell. When designing with this device, ensure the VQFN exposed pad is soldered to a sufficient copper pour (at least 1 cm²) to meet the theta-JA of ~28 °C/W; otherwise junction temperature can exceed 125 °C during sustained 32 MHz operation. The PIC24F instruction set is source-compatible with PIC24H and PIC24E families, simplifying migration to higher-performance PIC24 parts when MIPS headroom runs out. This page combines verified distributor pricing, drop-in PIC24F family alternatives, and practical PCB design guidance that goes beyond the manufacturer's datasheet, giving engineers and procurement teams a single decision-ready reference for the PIC24FJ96GA006-I/MR.

Cotización Contacto

PIC24FJ96GA006-I/PT

PIC24FJ96GA006-I/PT - 16-bit 96KB Flash MCU 64-TQFP | Microchip

The Microchip Technology PIC24FJ96GA006-I/PT is a 16-bit PIC24F microcontroller delivering 16 MIPS performance at 32 MHz with 96 KB of Flash program memory and 8 KB of RAM, housed in a 64-pin TQFP (PT) package with 10x10 mm body size and industrial -40C to +85C operating range. The device combines a modified Harvard RISC architecture with a 17-bit single-cycle hardware multiplier and 16-bit hardware divider, providing C-compiler-friendly instruction set optimized for embedded C development. A 16-bit microcontroller (MCU) is a microprocessor core with a 16-bit data path and instruction width, sitting in the taxonomy above 8-bit MCUs (e.g., PIC16, AVR) and below 32-bit MCUs (e.g., ARM Cortex-M). The PIC24F family specifically uses Microchip's eXtreme Low Power (XLP) technology, making this class of device ideal for battery-powered and energy-harvesting designs where milliamp-hour budgets are critical. Within the power management hierarchy, MCUs like the PIC24FJ96GA006-I/PT integrate the controller role alongside voltage regulators, supervisors, and PMICs in a complete system. Key features include 96 KB Flash (32K x 24), 8 KB SRAM, an integrated 8 MHz internal oscillator with 4x PLL for 32 MHz operation and multiple clock divide options, basic code-guard security for IP protection, and support for 2.5V/3.3V operation. Peripherals include multiple UART, SPI, and I2C interfaces, a Parallel Master Port (PMP) for graphics or external memory, a 16-bit timer/counter array, a 10/12-bit ADC, and a Real-Time Clock/Calendar (RTCC). The 64-pin TQFP exposes up to 53 digital I/O pins plus analog and peripheral functions, supporting rapid prototyping with Microchip's MPLAB X IDE and XC16 compiler. Typical applications include industrial control panels, HVAC user interfaces, low-power sensor hubs with RTCC wake, USB HID devices using the on-chip transceiver, motor control pre-drivers for small BLDC fans, and graphic LCD/segment displays using the PMP. Designers should note that the -I/PT suffix denotes industrial temperature range (-40C to +85C) and TQFP-64 tray packaging, while the parallel -I/MR variant ships in 64-pin QFN. The Flash programming specification is documented separately in Microchip's flash programming guide for production programming tooling. This page synthesizes distributor pricing, drop-in same-package alternatives from the same Microchip PIC24FJ family, and practical design notes beyond what is found in the manufacturer datasheet alone.

Cotización Contacto

PIC24FJ96GA006T-I/PT

PIC24FJ96GA006T-I/PT - 16-bit 96KB Flash MCU, 64-TQFP | Microchip

The Microchip Technology PIC24FJ96GA006T-I/PT is a 16-bit PIC24F microcontroller featuring 96 KB of Flash program memory, 8 KB of SRAM, and a maximum CPU speed of 32 MHz (16 MIPS at 3.3 V), housed in a 64-pin TQFP (10x10 mm) package with 53 general-purpose I/O pins. The "/PT" suffix denotes the TQFP package, while the trailing "T" indicates Tape & Reel packaging, and the "-I/" indicates the industrial operating temperature range. Background Knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC24F family is Microchip's 16-bit MCU line using a modified Harvard RISC architecture, positioned between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families. PIC24F devices specifically target low-power and cost-sensitive embedded applications requiring more performance and code density than 8-bit MCUs. Key features of the PIC24FJ96GA006T-I/PT include eXtreme Low Power (XLP) technology for battery-friendly operation, dual I2C, dual SPI, and dual UART communication peripherals, multiple 16-bit timers, a 10-bit ADC, and a 16-bit Parallel Master Port. The integrated Peripheral Pin Select (PPS) feature allows flexible digital peripheral remapping, simplifying PCB layout. The 64-pin TQFP provides ample I/O for human-interface, sensor, and motor-control front-ends. Technical depth: The PIC24FJ core operates from 2.0 V to 3.6 V, supports 16 MIPS performance, and includes hardware multiply/divide and a deterministic interrupt response. The 96 KB Flash is organized as 32K x 24 words, allowing C-compiler-friendly code density, while the 8 KB SRAM supports moderate data buffering. The device also features a Real-Time Clock Calendar (RTCC) with dedicated 32 kHz oscillator input. Typical applications include industrial sensor nodes, portable medical devices, USB peripherals, graphical user interfaces with segmented LCDs, low-power wireless sensor hubs, and consumer appliance controllers. The wide peripheral mix suits connected-embedded designs that require multi-protocol communication and ample code space. Design consideration: ensure the selected programming toolchain (MPLAB X IDE with XC16 compiler) is set for the PIC24FJ target, and respect the 3.3 V supply range to avoid damaging the core logic. For lowest standby power, leverage the deep-sleep mode with RTCC retention. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping engineers select and source the right MCU for volume production.

Cotización Contacto

PIC24FJ96GA008-I/PT

PIC24FJ96GA008-I/PT - 16-bit MCU, 96KB Flash, 80-TQFP | Microchip

The Microchip Technology PIC24FJ96GA008-I/PT is a 16-bit PIC24F-family microcontroller with 96 KB Flash, 8 KB RAM, and a 16 MIPS CPU core operating at 32 MHz from a modified Harvard architecture. It is housed in an 80-pin TQFP (12x12 mm) package and operates across an industrial temperature range of -40C to +85C. This part is part of the PIC24FJXXXGA0XX flash programming specification family, and integrates a 16-bit timer, a 17-bit single-cycle hardware multiplier by 16-bit hardware divider, and 69 I/O pins for general-purpose embedded designs. Background: A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals (timers, ADC, UART, SPI, I2C). The PIC24F sub-family uses a 16-bit modified Harvard architecture that fetches instructions and data through separate buses, allowing single-cycle instruction prefetch and deterministic interrupt latency. Within the broader taxonomy, an MCU is a type of integrated circuit -> semiconductor -> electronic component, sitting alongside microprocessors (MPUs), DSPs, and FPGAs in the embedded processing hierarchy. PIC24F parts are widely used for cost-sensitive 16-bit applications where 8-bit MCUs lack peripherals and 32-bit MCUs are overkill. Key features of the PIC24FJ96GA008 include 96 KB (32K x 24) self-programmable Flash, 8 KB RAM, an 8 MHz internal oscillator with 4x PLL option providing the 32 MHz system clock, and 16 MIPS sustained throughput. It also integrates multiple communication peripherals and a C-compiler-optimized instruction set, allowing high-level language development without sacrificing deterministic real-time performance. Architecturally, the PIC24FJ96GA008 implements a 16-bit working register array and dedicated hardware multiply/divide units, enabling efficient C-language code generation. The 4x PLL option lets designers trade external oscillator cost for internal clock flexibility, while the 16 MIPS throughput provides headroom for motor-control, sensor-fusion, and human-interface firmware stacks. Typical applications include industrial sensor hubs, low-power HMI panels, USB device controllers, and automotive body-electronics modules where -40C to +85C operation is required. It fits designs that need 96 KB Flash and 69 I/O but not the larger 128 KB variant of the same family. When designing with this device, allocate the Flash budget between bootloader and application images; the family supports self-programming but limits erase/write endurance to roughly 100 cycles on certain blocks, so a careful in-application-programming (IAP) strategy is recommended for field-upgradable products. This page synthesizes distributor pricing, same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC24FJ96GA008T-I/PT

PIC24FJ96GA008T-I/PT - 16-bit 16MHz 96KB Flash MCU | Microchip

The Microchip Technology PIC24FJ96GA008T-I/PT is a 16-bit microcontroller from the PIC24F family, featuring a 16 MHz CPU core (16 MIPS), 96 KB (32K x 24) of embedded Flash program memory, and 8 KB of SRAM, housed in an 80-pin TQFP (12x12 mm) package supplied on tape and reel. The device integrates a modified Harvard architecture with a 17-bit x 17-bit single-cycle hardware multiplier and a 32-bit/16-bit hardware divider, a C-compiler-optimized instruction set, and an 8 MHz internal oscillator with 4x PLL and multiple divide options. Industrial operating temperature range is -40 °C to +85 °C, and supply is 2.5 V/3.3 V. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, RAM, and I/O peripherals. Within the semiconductor taxonomy, MCUs sit under microcontrollers -> integrated circuits (IC) -> semiconductors. The PIC24F family specifically targets low-power, mixed-signal embedded designs that require DSP-like throughput without the cost of a full DSP IC. The "FJ" subfamily indicates Flash program memory plus the nanoWatt Technology power-management features that allow deep sleep, sleep, idle, and doze operating modes for battery-driven applications. Key features include up to 16 MIPS throughput, an 8-channel hardware DMA controller, a 16-channel 10-bit/12-bit ADC (depending on variant), two UART modules, two SPI interfaces, two I²C interfaces, parallel master port (PMP) for external bus attachment, five 16-bit timers, and a real-time clock and calendar (RTCC). Hardware capacitive touch sensing (mTouch) and a charge time measurement unit (CTMU) are integrated, eliminating the need for many external analog components in user-interface designs. Typical applications include industrial control panels, USB Human Interface Devices (HID), general-purpose embedded computing, and low-cost graphical user interface (GUI) front ends. Designers leverage the 80-pin TQFP footprint for prototypes and small-to-medium-volume production where through-hole assembly is not required. Design considerations: the 80-pin TQFP package (12 x 12 mm body, 0.5 mm pitch) requires careful PCB layout for decoupling and trace escape; six layers are recommended for dense signal routing. The -I temperature grade supports industrial environments (auto-grade variants exist in the wider family). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not available in the manufacturer datasheet PDF alone.

Cotización Contacto

PIC24FJ96GA010-I/PF

PIC24FJ96GA010-I/PF - 16-bit 96KB Flash MCU, 100-TQFP | Microchip

The Microchip Technology PIC24FJ96GA010-I/PF is a 16-bit RISC PIC24F microcontroller delivering up to 16 MIPS at 32 MHz internal clock (16 MHz instruction cycle) in a 100-pin TQFP (PF, 14x14 mm) package with 84 general-purpose I/O lines. It integrates 96 KB of on-chip Flash program memory, 8 KB of SRAM data memory, and the PIC24F eXtreme Low Power (XLP) peripheral set aimed at general-purpose embedded designs. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable peripherals on one die. PIC24F MCUs belong to the modified-Harvard 16-bit family that sits between 8-bit PIC16/PIC18 devices and 32-bit PIC32 parts in Microchip's portfolio; they typically appear as power-efficient controllers in human-interface, sensor, and industrial nodes where 8-bit performance is insufficient but 32-bit cost is not justified. Key features include 96 KB Flash (32K x 24 words), 8 KB SRAM, up to 16 MIPS throughput, integrated nanoWatt XLP power management, hardware RTCC, multiple UART/SPI/I2C peripherals, a 16-channel 10-bit ADC (1.1 Msps typical), and a Parallel Master Port for external memory expansion. The 84 GPIO pins support 5 V-tolerant I/O on most signals, simplifying mixed-voltage designs with 5 V sensors and 3.3 V logic. The device uses a modified-Harvard architecture with a 16-bit data path and 24-bit instruction word, plus a 16-element by 16-bit working register array and software stack. This combination enables deterministic interrupt response and C-language efficiency at modest clock rates, with peripheral Direct Memory Access (DMA) on some channels reducing CPU load in data-acquisition loops. Typical applications include industrial control HMI panels, USB device/keyboard controllers, graphical LCD drivers, sensor aggregation hubs, medical patient monitors, and general-purpose 16-bit embedded platforms. The wide peripheral mix allows one part to replace multiple 8-bit devices plus glue logic. When designing with this part, ensure the 100-pin TQFP footprint is matched by your PCB; the -I industrial temperature grade supports -40C to +85C operation. Use MPLAB X IDE with the XC16 compiler for firmware development, and consider the PIC24FJ128GA010-I/PF as a same-footprint upgrade with 128 KB Flash if your code is approaching the 96 KB ceiling. This page synthesizes verified distributor pricing, true drop-in pin-compatible alternatives from Microchip's PIC24F family, and practical design notes that go beyond the manufacturer datasheet.

Cotización Contacto

PIC24FJ96GA010-I/PT

PIC24FJ96GA010-I/PT - 16-bit 96KB Flash MCU 100-TQFP | Microchip

The Microchip Technology PIC24FJ96GA010-I/PT is a 16-bit PIC24F microcontroller with 96 KB Flash program memory, 8 KB RAM, and an integrated peripheral set, housed in a 100-pin TQFP (12x12 mm) package. It operates at up to 16 MIPS with a 32 MHz internal oscillator (8 MHz with 4x PLL), targeting low-power eXtreme low-power (XLP) designs. A PIC24F microcontroller is a 16-bit RISC MCU in Microchip's PIC24 family, designed for applications that demand more computational throughput than 8-bit PIC MCUs while retaining a familiar peripheral set. PIC24F belongs to the broader PIC24 family (16-bit MCU) within Microchip's MCU portfolio, which itself sits inside the microcontroller -> embedded controller -> semiconductor hierarchy. The 'FJ' suffix indicates Flash program memory with nanowatt XLP technology, while 'GA010' identifies the specific die and pin-count variant. Key features of the PIC24FJ96GA010-I/PT include 96 KB (32K x 24) Flash, 8 KB RAM, hardware 17-bit-by-16-bit multiply and 16-bit-by-16-bit divide, a 16-channel 10-bit ADC with 500 ksps throughput, multiple UART/SPI/I2C peripherals, a Real-Time Clock and Calendar (RTCC), and JTAG boundary scan for production test. The 100-pin TQFP exposes up to 84 general-purpose I/O pins, providing generous connectivity for parallel buses, displays, and external peripherals. The device uses a Modified Harvard architecture with a 16-bit working register array, optimized for C compiler efficiency. Integrated peripherals include a Parallel Master Port (PMP) for graphics or external memory, five 16-bit timers, and a charge time measurement unit (CTMU) for capacitive touch sensing. The combination of wide memory, rich peripherals, and an industrial temperature range makes it suitable for embedded control, HMI, and instrumentation. Typical applications include industrial control panels, home appliance controllers, graphic display interfaces, medical monitoring, USB peripherals, and automotive body modules. The wide I/O count supports complex peripheral interfacing, while the XLP power management enables battery-powered designs. Compliance is RoHS-compliant and ships in 100-TQFP TRAY packaging per industry standard. When designing with the PIC24FJ96GA010-I/PT, ensure the supply voltage (2.5V/3.3V) decoupling network uses 100 nF ceramics close to each VDD pin. For low-power designs, leverage the XLP sleep modes with RTCC wake; for graphics, use the PMP bus with appropriate external bus-timing analysis. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ GA family, and practical design notes not found in the manufacturer datasheet, including a parameter-by-parameter comparison against the lower-density PIC24FJ64GA010-I/PT and higher-density PIC24FJ128GA010-I/PT for memory-driven design decisions.

Cotización Contacto

PIC24FJ96GA010T-I/PT

PIC24FJ96GA010T-I/PT - 16-bit MCU, 96KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24FJ96GA010T-I/PT is a 16-bit PIC24F general-purpose microcontroller delivering 16 MIPS performance, 96 KB of Flash program memory, and 8 KB of RAM in a 100-pin TQFP package. The device includes a hardware 16x16 multiplier, a single-cycle 32-bit-by-16-bit hardware divider, and a C-compiler-optimized instruction set targeting embedded applications. Tape-and-reel packaging is indicated by the "/T" suffix, and "/PT" denotes the 100-lead TQFP. A 16-bit PIC microcontroller (MCU) is a microcontroller built around a 16-bit data path and instruction word, offering roughly twice the throughput and code density of common 8-bit MCUs while remaining simpler and more deterministic than 32-bit Cortex-M parts. Within the Microchip taxonomy, PIC24F devices sit in the PIC24 family (16-bit), targeting low-power general-purpose and consumer applications with rich peripheral integration including USB, RTCC, and 10/12-bit ADC. PIC MCUs fit into the broader hierarchy: microcontroller -> embedded MCU -> semiconductor -> integrated circuit. Key features of this part include 16 MIPS CPU throughput at 32 MHz, 96 KB self-programmable Flash, 8 KB RAM, an enhanced parallel master/slave port (PMP/PSP), multiple UART/SPI/I2C interfaces, a 16-channel 10-bit ADC, and five 16-bit timers. The PIC24FJ96GA010 is a general-purpose member of the GA010 subgroup and supports Microchip's standard development ecosystem including MPLAB X IDE, MPLAB XC16 compiler, and PICkit programmers. Architecturally, the PIC24FJ core uses a 24-bit instruction word with a 16-bit data path, Harvard-style bus architecture, and a vectored interrupt controller with configurable priorities. The wide Flash and RAM resources, combined with the PMP peripheral, make the GA010 sub-family suitable for graphical LCD, USB, and external memory interfaces in 100-pin designs. Typical applications include industrial control panels, building automation, USB peripherals, HVAC controllers, consumer appliances, and graphical HMI systems. The 100-pin footprint supports the larger I/O count required by these use cases. This part is well-suited to designs needing the larger code space and rich peripherals of the GA010 group without the analog-intensive features of later FJ-GA1xx families. When designing with this device, ensure VDD decoupling is robust (typically 10 uF bulk + 100 nF per pin pair), reference the family datasheet's I/O multiplexing tables for alternate pin functions, and confirm the JTAG/ICSP programming connections match your in-circuit programmer layout. Code density on PIC24 is approximately 1.4x-2x that of PIC18, simplifying migration from 8-bit designs. This page synthesizes distributor pricing, drop-in alternatives from the same PIC24FJ GA010/GA006 family, and practical design notes drawn from Microchip's family datasheet - information not consolidated on any single distributor page.

Cotización Contacto

PIC24FV08KM101-E/P

PIC24FV08KM101-E/P - 8KB Flash 16-bit MCU, 20-PDIP | Microchip

The Microchip Technology PIC24FV08KM101-E/P is a 16-bit microcontroller from the PIC® XLP™ 24F family, featuring 8 KB of Flash program memory (organized as 2.75K x 24), 1 KB of RAM, and operating speeds up to 32 MHz. Housed in a 20-pin PDIP (0.300", 7.62 mm) through-hole package, it is built on the nanoWatt eXtreme low-power architecture and supports wide-range 2.0 V to 5.5 V operation for both 3 V and 5 V applications. A microcontroller is a single integrated circuit that combines a processor core, program memory, data memory, and configurable I/O peripherals on one die, enabling compact, deterministic embedded control. Within the system hierarchy, the PIC24FV08KM101 sits under the PIC24F family of 16-bit Flash microcontrollers, itself part of the broader 16-bit MCU category, which bridges 8-bit PIC MCUs and 32-bit ARM Cortex-M devices. The "F" denotes Flash program memory; the "V" indicates the wide-voltage variant; the "KM" series adds Configurable Logic Cell (CLC), Capture/Compare/PWM modules, and 12-bit ADC support; and "101" identifies the 8 KB Flash / 1 KB RAM memory profile. Key features include a 16-channel 10-bit or 12-bit Analog-to-Digital Converter, multiple Capture/Compare/PWM (MCCP/SCCP) peripherals, configurable logic cells, comparators, and a 512-byte EEPROM emulation block in Flash. Connectivity is provided through I²C, SPI, UART/USART, IrDA, and LINbus interfaces. The nanoWatt XLP architecture supports multiple low-power Sleep and Idle modes for battery-driven designs. Internally the device uses a modified Harvard architecture with a 16-bit data path, hardware multiply/divide, and a 16-element working register array. The wide 2.0 V to 5.5 V supply range allows direct interface with both 3.3 V and 5 V sensors and logic families without level translation, and the 12-bit ADC with multiple S&H or I2 input channels supports mixed-signal sensing tasks. Typical applications include low-power sensor nodes, industrial control peripherals, automotive body electronics (LIN nodes), USB/HID accessories using the PIC24F USB-capable family, LED lighting controllers, and battery-charging front ends. The 20-pin PDIP package is especially suited for through-hole prototyping, educational platforms, and pre-production builds where easy rework is required. When designing with the PIC24FV08KM101-E/P, decouple VDD with a 100 nF ceramic capacitor placed as close to the pin as possible, and add a 10 µF bulk capacitor if the supply traces are long. Confirm that your chosen supply voltage remains within the 2.0 V–5.5 V specification across temperature, because the V variant tolerates 5 V operation only because of its internal charge-pump design. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC24FV08KM101-E/P — content not aggregated in the Microchip datasheet or any single distributor page.

Cotización Contacto

PIC24FV08KM101-E/SO

PIC24FV08KM101-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM101-E/SO is a 16-bit microcontroller from the PIC® XLP™ 24F family, featuring 8 KB of Flash program memory, 1 KB of SRAM, and 512 B of EEPROM in a 20-pin SOIC (7.50 mm) wide-body package. It operates up to 32 MHz and is built on Microchip's nanoWatt eXtreme Low Power (XLP) technology, supporting 2.0 V to 5.5 V operation for both 3 V and 5 V rails. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The PIC24F family in particular targets low-power and mixed-signal embedded applications. Within the broader taxonomy, the PIC24FV08KM101 sits at the hierarchy 16-bit MCU -> microcontroller -> embedded processor -> semiconductor device, and includes integrated peripherals such as a 12-bit ADC, comparators, CCP/SCCP/MCCP timers, configurable logic cells, and USB/serial interfaces. Key specifications include an 8 KB (2.75 K x 24 instruction words) Flash, 1 KB SRAM, 512 B EEPROM, a 12-bit A/D converter with up to 16 input channels, configurable 10-bit and 12-bit ADC resolution, and a hardware multiplier that accelerates DSP-like math. The PIC24FV variant extends the core 1.8 V minimum to 2.0 V, optimizing it for 5 V designs where wider Vdd tolerance is required without a separate LDO. Architecturally, the device uses a 16-bit modified Harvard CPU with a 24-bit instruction word, allowing single-cycle fetches at 32 MIPS peak throughput. XLP technology enables sleep currents below 1 µA, while peripheral features (RTCC, deep-sleep WDT, charge-back RTC) make it well suited to battery-powered designs that need to retain time-keeping for years. Typical applications include portable medical sensors, industrial data loggers, USB human-interface devices (HID), consumer white-goods control panels, and low-power IoT edge nodes. The combination of 5 V tolerance and XLP efficiency is unusual in 16-bit MCUs. When designing with this part, ensure the 20-pin SOIC layout matches your PCB footprint, that decoupling is placed close to Vdd/Vss pairs, and that unused pins are configured as outputs or inputs with weak pull-ups to minimize sleep current. The device is supported by MPLAB X IDE, XC16 compiler, and Microchip's Code Configurator (MCC) for peripheral initialization. This page synthesizes verified distributor pricing, drop-in pin-compatible alternatives, and practical design notes drawn from Microchip datasheet sections and application notes, providing information beyond what is available on a typical distributor product page.

Cotización Contacto

PIC24FV08KM101-I/P

PIC24FV08KM101-I/P - 8KB Flash 16-bit XLP MCU | Microchip | PDIP-20

The Microchip Technology PIC24FV08KM101-I/P is a 16-bit PIC24F XLP microcontroller with 8KB Flash, 1KB RAM, and 512B EEPROM, delivering 32 MIPS performance in a 20-pin PDIP through-hole package. It features nanoWatt eXtreme Low Power technology with a wide 2.0V to 5.5V operating range, making it suitable for both 3V and 5V application rails. The device integrates 17 general-purpose I/O pins, three 16-bit timers, and flexible Capture/Compare/PWM (CCP/SCCP) modules. Analog-rich peripherals include a 12-bit A/D converter with up to 16 input channels, three analog comparators, and a Configurable Logic Cell (CLC) for hardware state-machine design without software overhead. Communication interfaces include UART, SPI, and I2C, enabling flexible sensor and peripheral integration. A 32MHz internal oscillator, 32kHz low-power secondary oscillator, and four selectable power-managed operating modes (Run, Doze, Idle, Sleep) support battery-friendly designs. The 'FV' voltage variant extends operation down to 2.0V versus the 'F' variant's 2.0V minimum, supporting both 2.5V, 3.3V, and 5V systems with a single part. Real-time interrupt and watchdog timer with on-chip regulator eliminate external components, reducing BOM cost and PCB area. Hardware-level In-Circuit Serial Programming (ICSP) and In-Circuit Debugger (ICD) interfaces accelerate firmware iteration during development. PIC microcontrollers are 16-bit RISC Harvard-architecture devices from Microchip Technology that target low-power, deterministic real-time embedded applications. The PIC24FV family specifically addresses nanoWatt XLP designs - parts engineered for years of battery life through aggressive sleep-mode current minimization. Within Microchip's portfolio, PIC24FV bridges 8-bit PIC16/PIC18 simplicity with dsPIC33 digital signal processing, offering C-friendly programming with 16-bit wide datapath, hardware multiply/divide, and deterministic interrupt latency. Typical applications for the PIC24FV08KM101-I/P include IoT edge sensor nodes, battery-powered handheld instrumentation, consumer appliances, HVAC controls, and low-cost motor control where the CCP/PWM modules can drive MOSFET half-bridges or LED strings. The wide 2.0V-5.5V operating window and analog-rich peripherals make it suitable for mixed-signal front-end designs. Key design considerations: ensure decoupling capacitors (100nF plus 10uF bulk) are placed within 6mm of VDD/VSS pins, route the analog AVdd/AVss pair with a ferrite bead or pi-filter from digital VDD for clean ADC readings, and verify that the chosen programming/debug header (typically 5-pin ICSP) does not conflict with GPIO assignments on the lower pin-count packages. This page synthesizes distributor pricing, drop-in same-package alternatives, AEO-optimized FAQs, and practical design notes not consolidated on a single distributor or manufacturer page.

Cotización Contacto

PIC24FV08KM101-I/SO

PIC24FV08KM101-I/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM101-I/SO is a 16-bit RISC microcontroller from the PIC24F XLP™ KM family, featuring a 32MHz PIC24 CPU core, 8KB (2.75K x 24 words) of Flash program memory, 1KB of RAM, and a 12-bit ADC with up to 16 analog channels, housed in a 20-pin SOIC (SO) package. It belongs to the nanoWatt XLP™ eXtreme Low Power family and the FV designation extends the supply range to 2.0V-5.5V, enabling both 3V and 5V applications from a single part. A 16-bit PIC microcontroller is a Harvard-architecture device with separate program and data buses, executing instructions in a single cycle (except branches) via a modified RISC core with DSP-oriented features. The PIC24F family sits within Microchip's broader microcontroller taxonomy: microcontroller -> 16-bit MCU -> PIC24 -> PIC24F -> XLP KM series. Compared with 8-bit PIC16/PIC18 parts, the PIC24 offers higher computational throughput, richer peripherals, and richer DSP support while retaining the same MPLAB X development ecosystem. Key features include 16 MIPS performance at 32MHz, 1KB RAM, Configurable Logic Cell (CLC) blocks, multiple Capture/Compare/PWM (MCCP/SCCP) modules, comparators, op amps, and a 12-bit ADC. XLP technology typically delivers sleep currents in the tens of nanoamps, making the part suited for battery-powered applications. The wide 2.0V-5.5V operating range removes the need for separate 3V/5V part numbers in many designs. The architecture uses a 24-bit instruction word with 16-bit data paths and an 8-deep hardware stack. Two address generation units and DSP-class MAC instructions allow efficient signal processing in motor control, lighting, and sensor conditioning. The CLC peripheral lets designers route internal signals to combinational logic gates without external glue logic. Typical applications include low-power IoT sensor nodes, battery-powered portable instrumentation, consumer white goods, digital power supply control loops, LED lighting controllers, and automotive body/sensor modules. Designers choose this part when 5V tolerance and 3V battery operation must coexist on a single PCB. When designing with this MCU, observe the 2.0V-5.5V supply range and add bulk + decoupling capacitors (1uF + 0.1uF) near the AVDD/VDD pins. The CLC, MCCP, and 12-bit ADC blocks should be configured in MPLAB X IDE using the MPLAB Code Configurator (MCC) plugin to avoid register-level pitfalls. This page synthesizes distributor pricing, drop-in pin-compatible alternatives across the PIC24F KM family, and practical low-power design notes that are not assembled in the manufacturer datasheet.

Cotización Contacto

PIC24FV08KM101-I/SS

PIC24FV08KM101-I/SS - 16-bit XLP MCU, 8KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC24FV08KM101-I/SS is a 16-bit PIC24F microcontroller from the XLP™ nanoWatt eXtreme Low Power family, featuring 8KB (2.75K x 24) of Flash program memory, 1KB of SRAM, and a 32 MHz (16 MIPS) modified Harvard CPU core, housed in a 20-pin SSOP package. The device supports a wide 2.0V to 5.5V operating voltage range, making it compatible with both 3.3V and 5V rails, and includes 17 digital I/O pins, one 12-bit ADC, configurable logic cells (CLC), and capture/compare/PWM modules. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (ADC, timers, communication ports) into one package. 16-bit MCUs such as the PIC24F family sit between 8-bit microcontrollers and 32-bit ARM Cortex-M parts, offering higher computational throughput (16 MIPS at 32 MHz) than 8-bit parts while keeping cost, code complexity, and power consumption well below typical 32-bit alternatives. The 'F' in PIC24F denotes the Flash-based, low-power product line, and the 'FV' extension indicates the wide-voltage variant supporting 2.0V to 5.5V. Key features include XLP™ nanoWatt technology with multiple low-power modes (Sleep, Idle, Doze), an integrated 12-bit A/D converter, configurable logic cells that let designers replace discrete glue logic with on-chip peripherals, and peripheral pin select for flexible signal routing. The device also includes a real-time clock calendar (RTCC) and a charge time measurement unit (CTMU) for capacitive touch and basic sensor interfaces. Architecturally, the PIC24FV08KM101 uses a 16-bit modified Harvard core with separate instruction and data paths, a hardware stack, and 16 working registers, achieving 16 MIPS at 32 MHz. The 8KB Flash holds approximately 2.75K 24-bit instructions, and the 1KB data RAM supports C-language stacks and buffers. Wide-voltage operation is achieved through an on-chip voltage regulator that derives the internal 1.8V logic supply from the wide VIN range. Typical applications include low-power sensor nodes, battery-powered portable instruments, home appliances, LED lighting control, capacitive touch user interfaces, and small industrial control modules where 8-bit performance is insufficient but cost and power must remain low. When designing with this MCU, verify that the application fits within 8KB of Flash and 1KB of RAM, and choose the appropriate clock configuration (internal 8 MHz FRC or external crystal) to balance power consumption against timing accuracy. The SSOP-20 footprint is hand-solderable but uses a 0.65 mm pitch, so production boards typically reflow. This page synthesizes distributor pricing from DigiKey, Mouser, Octopart and LCSC, lists 6 same-package drop-in alternatives (including 5 same-Microchip siblings from the PIC24F/FV KM family and one PIC24FJ cross-brand drop-in), and surfaces practical design notes that go beyond the manufacturer datasheet summary.

Cotización Contacto

PIC24FV08KM101T-I/SO

PIC24FV08KM101T-I/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM101T-I/SO is a 16-bit microcontroller from the PIC® XLP™ 24F family, featuring 8KB (2.75K x 24) of Flash program memory, 1KB RAM, and 512 bytes of EEPROM in a 20-pin SOIC (0.295 inch / 7.50 mm width) package. It operates at up to 32 MHz CPU clock and supports a wide 2.0V to 5.5V supply range, making it suitable for both 3V and 5V applications. The 'T' suffix indicates Tape & Reel packaging for high-volume assembly. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces (ADC, UART, I2C, SPI, timers, GPIOs) into one package. The PIC24F family belongs to the 16-bit DSP-enhanced microcontrollers category, sitting above 8-bit MCUs (PIC16/PIC18) but below 32-bit ARM Cortex-M parts in terms of performance, code density, and price. Within the Microchip hierarchy it is part of the broader "Power Management + Compute" ecosystem for embedded designs. Key features include Microchip's nanoWatt eXtreme Low Power (XLP) technology, flexible Capture/Compare/PWM (MCCP/SCCP) modules for motor and power control, a 12-bit ADC, on-chip comparators, a Configurable Logic Cell (CLC), and 5V-tolerant I/O. The CLC lets designers implement custom combinational/sequential logic in hardware without external glue chips. Integrated peripherals reduce BOM cost and PCB area versus discrete solutions. The PIC24FV08KM101T-I/SO uses a modified Harvard architecture with separate program and data buses plus a 16-bit instruction set with DSP-friendly addressing. The 32 MIPS performance at 32 MHz, combined with the 17-bit x 17-bit hardware multiplier, enables real-time DSP tasks such as digital filters and motor control loops on the same die as the application logic. Typical applications include low-power IoT sensor nodes, battery-powered portable medical devices, consumer electronics with USB-C charging, HVAC and white-goods control panels, and industrial sensor interfaces. Designers favor the XLP nanoWatt technology for sleep currents as low as the datasheet's nanoWatt range, which is critical for coin-cell and Energy Harvesting designs. When designing with this device, ensure your MPLAB X project selects the PIC24FV08KM101 device variant and enables the FV (wide-voltage) macro. Decoupling caps (100 nF + 1 µF) placed close to VDD/AVDD pins are mandatory for ADC accuracy, and unused I/O should be configured as outputs low to minimize leakage. This page synthesizes distributor pricing, drop-in Microchip alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC24FV08KM102-E/SP

PIC24FV08KM102-E/SP - 16-Bit MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24FV08KM102-E/SP is a 16-bit PIC microcontroller in the PIC® XLP™ 24F family, featuring a 32 MHz CPU core, 8 KB of Flash program memory (2.75K × 24-bit words), 1 KB of SRAM, and 512 bytes of EEPROM, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It belongs to the PIC24FV variant line, which supports an extended 2.0 V to 5.5 V operating voltage range suitable for both 3 V and 5 V applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working memory (SRAM), data EEPROM, and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O. Within the broader taxonomy, the PIC24FV08KM102 sits in the 16-bit MCU class, above 8-bit MCUs (PIC10/12/16) and below 32-bit MCUs (PIC32, ARM Cortex-M). It belongs to the category of low-power embedded controllers used in battery-powered and energy-harvesting designs. Key features of this device include a 16-bit modified Harvard architecture with a 32 MHz internal oscillator, nanoWatt eXtreme Low Power (XLP) technology for deep sleep currents in the nanoamp range, multiple Capture/Compare/PWM (MCCP/SCCP) modules for motor control and lighting, a 12-bit Analog-to-Digital Converter (ADC), comparators, and a Configurable Logic Cell (CLC) for hardware glue logic without external gates. The integrated peripheral set reduces BOM cost and PCB footprint for space-constrained designs. The PIC24FV08KM102 is engineered for ultra-low-power applications using the XLP nanoWatt technology platform. Sleep currents below 100 nA in deep sleep with Real-Time Clock and Calendar (RTCC) running make this part suitable for battery-powered sensor nodes that must operate for years on a single coin cell. The wide 2.0 V–5.5 V supply range eliminates the need for multiple voltage rails and allows direct connection to single-cell Li-ion, two-cell AA, and 5 V USB-powered systems. Typical applications include IoT sensor nodes, wearable health monitors, battery-powered consumer devices, low-cost motor control, and 5 V industrial control modules. The 28-pin SPDIP package is particularly attractive for prototyping and educational kits, as it drops into a standard 28-pin DIP socket or breadboard for easy firmware iteration. When designing with this MCU, pay close attention to the power supply decoupling scheme (a 100 nF ceramic on VDD is mandatory), and configure unused I/O pins as outputs to minimize sleep current. The MPLAB XC16 compiler is the supported toolchain, and firmware is programmed via the ICSP interface using tools such as MPLAB ICD 4 or PICkit 4. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC24FV08KM102-E/SP that go beyond what is found in the manufacturer datasheet alone, helping engineers evaluate sourcing and second-source options.

Cotización Contacto

PIC24FV08KM102-E/SS

PIC24FV08KM102-E/SS - 16-bit 32MHz 8KB Flash XLP MCU | Microchip

The Microchip Technology PIC24FV08KM102-E/SS is a 16-bit PIC24F microcontroller built on the nanoWatt eXtreme Low Power (XLP) architecture, delivering 32 MIPS of CPU performance from a 32 MHz oscillator in a 28-pin SSOP package. It integrates 8 KB of Flash program memory (2.75K x 24 instruction words), 1 KB of SRAM, and 512 bytes of EEPROM, with the wide 2.0V–5.5V PIC24FV supply range enabling both 3V and 5V designs from a single part. A 16-bit MCU is a microcontroller whose data path, registers and ALU are 16 bits wide, sitting hierarchically between 8-bit MCUs (PIC16, AVR) and 32-bit MCUs (PIC32, ARM Cortex-M). The PIC24F family specifically targets low-power embedded applications, occupying the cost/power sweet spot for sensor hubs, human-machine interfaces and battery-powered consumer devices. Within Microchip's portfolio the PIC24FV08KM102 sits inside the KM1xx sub-family of the PIC24F family, which adds a Configurable Logic Cell (CLC) and Peripheral Pin Select (PPS) for flexible peripheral routing. Key features include a 12-bit ADC with up to 13 input channels, two analog comparators, a charge time measurement unit (CTMU) for capacitive touch, four 16-bit timers, capture/compare/PWM peripherals and multiple communication interfaces including UART, SPI and I2C. The on-chip RTCC, deep sleep current in the nanoamp range, and Peripheral Module Disable allow overall system draw to drop below 1 µA in sleep, which is why this part appears in long-life battery designs. Architecturally, the device uses a modified Harvard bus with separate program and data paths, a 16-bit instruction set optimized for C compilation, and a wide operating voltage range from 2.0V to 5.5V. The PIC24FV (wide Vdd) variant extends the 1.8V–3.6V F-series limit up to 5V, making it compatible with legacy 5V analog and industrial buses without level shifters. Typical applications include low-power sensor nodes, capacitive touch user interfaces, battery chargers and power monitors, industrial control panels, and portable medical accessories. When designing with this MCU, ensure PPS is configured before peripheral use and that the 12-bit ADC's acquisition time matches the source impedance to avoid gain errors.

Cotización Contacto

PIC24FV08KM102-I/SP

PIC24FV08KM102-I/SP - 8KB Flash 16-bit MCU, SPDIP-28 | Microchip

The Microchip PIC24FV08KM102-I/SP is a 16-bit microcontroller from the PIC24F XLP family, featuring 8 KB of Flash program memory, 1 KB of SRAM, and 512 bytes of EEPROM, running at up to 32 MHz core speed in a 28-pin SPDIP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), working memory (RAM), and a rich set of peripherals (ADCs, timers, communication interfaces, GPIO) into one device. The PIC24F family extends this with a 16-bit modified Harvard architecture and Microchip's nanoWatt XLP extreme-low-power extensions, positioning these MCUs in the hierarchy: 16-bit MCU -> PIC24F -> low-power MCU -> embedded microcontroller -> semiconductor IC. The "FV" suffix denotes wide-range (2.0V-5.5V) operation, distinguishing these from the standard "F" 3.3V-only variants. Key features include a 12-bit ADC with up to 500 ksps conversion rate, configurable logic cells (CLC) for hardware glue logic without firmware, multiple Capture/Compare/PWM (MCCP/SCCP) modules, comparators, and 5V-tolerant I/O. The nanoWatt XLP technology delivers sleep currents below 1 µA with retention, making it suitable for battery-powered products. Typical applications include low-cost 5V sensor nodes, industrial control panels, low-power IoT endpoints, and consumer white goods. The 28-SPDIP package remains preferred for prototyping, educational kits, and through-hole designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC24FV08KM102-I/SS

PIC24FV08KM102-I/SS - 16-bit XLP MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24FV08KM102-I/SS is a 16-bit PIC24F microcontroller from the PIC® XLP™ 24F family featuring nanoWatt eXtreme low-power technology, 32 MHz maximum operating frequency, 8 KB Flash program memory, 1 KB RAM, and 512 B EEPROM, housed in a 28-pin SSOP package. It belongs to the "V" wide-voltage subfamily, supporting 2.0V to 5.5V operation, which makes it suitable for both 3V and 5V battery-powered and industrial systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working RAM, and a rich set of peripherals on one die. Microcontrollers sit at the lowest tier of embedded computing beneath microprocessors and SoCs, and they dominate the market for low-power, deterministic, cost-sensitive products such as sensor nodes, white goods, and wearable electronics. The PIC24F family in particular occupies the 16-bit tier of Microchip's portfolio between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families, offering a meaningful performance step (16-bit data path, 24-bit instructions, hardware DSP-like operations) at modest cost and power. Key features of the PIC24FV08KM102-I/SS include: nanoWatt XLP sleep currents in the nanoamp range for battery-backed applications, a 12-bit A/D converter with up to 12 channels, multiple Capture/Compare/PWM modules, a Configurable Logic Cell (CLC), comparators, and integrated peripherals such as Brown-out Reset, Low-Voltage Detect, Power-on Reset, PWM, and a Watchdog Timer. It also supports up to 23 I/O pins in the 28-pin SSOP package, giving designers ample headroom for mixed-signal interfaces. The wide 2.0V to 5.5V VDD range is unusual for PIC24F devices and simplifies designs that must operate from a single-cell Li-ion as well as a regulated 5V supply. Architecturally, the PIC24FV08KM102 uses a modified Harvard CPU with a 16-bit data path and 24-bit instruction word, plus a hardware Multiply-Divide unit that completes a 16x16 multiply in a single cycle. The CLC peripheral is noteworthy: it allows the user to configure combinational and sequential logic from on-chip signals in firmware, replacing small external glue-logic ICs (gates, muxes, latches) with on-die equivalents - a feature Microchip also promotes for BOM reduction in motor-control and lighting designs. Typical applications include low-power sensor interfaces, consumer electronics (remote controls, e-readers, fitness wearables), portable medical devices, industrial control nodes, battery chargers, smart-home sensors, USB/HID peripherals, and any low-pin-count mixed-signal design that benefits from a wide VDD range. Designers should note that the 28-SSOP footprint is the same as the pin-compatible PIC24F08KM102 (5V-only) variant, which is helpful when migrating between 3V and 5V rails. Pricing references are current as of 2026-09-30 from DigiKey and Mouser listings for the -40C to +85C industrial-grade -I/SS device. This page synthesizes distributor pricing, package-correct drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet. For pinout details and recommended decoupling, consult the official Microchip PIC24FV08KM102 datasheet.

Cotización Contacto

PIC24FV08KM102T-I/ML

PIC24FV08KM102T-I/ML - 16-Bit 32MHz 8KB Flash MCU 28-QFN | Microchip

The Microchip Technology PIC24FV08KM102T-I/ML is a 16-bit PIC® XLP™ 24F microcontroller running up to 32 MHz with 8 KB (2.75K x 24) of Flash program memory, 1 KB of RAM, and 512 bytes of EEPROM, housed in a 28-pin QFN (6x6 mm) package with an exposed thermal pad. It supports wide operating voltage from 2.0 V to 5.5 V, which is the key differentiator of the FV family, and integrates a 12-bit ADC with up to 19 channels, comparators, configurable logic cells (CLC), and multiple Capture/Compare/PWM (MCCP/SCCP) peripherals for mixed-signal designs. The /ML suffix denotes the 28-QFN (6x6) lead-free industrial temperature range package (-40C to +85C) supplied in tape and reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a configurable set of peripherals such as UART, I2C, SPI, ADC, timers, and PWM channels. Within the broader taxonomy, this part belongs to: microcontroller -> 16-bit MCU -> PIC24F family -> nanoWatt XLP low-power tier. The PIC24FV series extends the platform with 2.0 V–5.5 V support for both battery-powered and 5 V industrial designs, while the XLP nanoWatt technology targets sleep currents measured in nanoamps for energy-harvesting and always-on applications. Key features include 32 MIPS CPU throughput, eXtreme low-power (XLP) sleep modes (typical <100 nA), 16-bit wide instructions, two I2C/SPI/UART selectable serial interfaces, five 16-bit timers, and a configurable logic cell (CLC) that allows on-the-fly digital glue logic without external gates. The 12-bit ADC with hardware averaging delivers up to 19 analog channels for sensor acquisition. The device also provides a charge time measurement unit (CTMU) for capacitive touch sensing. From an architectural perspective, the PIC24F core is a modified Harvard machine with a 16-bit data path and 24-bit instruction word, enabling compact code density for C and assembly. The 8 KB Flash is organized as 2.75K x 24 (instruction-word addressing), and the single-cycle 32 MHz operation yields 32 MIPS of computational throughput. Typical applications include portable medical monitors, low-power IoT sensor nodes, 5 V industrial controllers, automotive body and accessory modules (non-safety), capacitive touch user interfaces, and battery-powered consumer electronics. The wide 2.0–5.5 V range lets the same part operate directly from a single Li-ion cell or a 5 V industrial rail. When migrating between PIC24F and PIC24FV variants, note that the FV designation adds 2.0 V minimum Vdd operation; the F variant (non-FV) typically requires 3.0 V. Use the silicon errata document for revisions and the device-specific programming spec for in-circuit serial programming (ICSP) pinouts. For production, program the part with MPLAB X IDE and a PICkit 5, MPLAB ICD 5, or Curiosity development board. Estimated: VDD decoupling requires a 100 nF ceramic cap within 3 mm of each VDD/VSS pair plus a 1 uF bulk cap on the rail.

Cotización Contacto

PIC24FV08KM202-E/ML

PIC24FV08KM202-E/ML - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM202-E/ML is a 16-bit PIC microcontroller from the PIC24F XLP KM family, featuring 8KB of Flash program memory (2.75K x 24 organization), 2KB of SRAM, and a 32MHz maximum CPU speed, all housed in a 28-pin QFN (ML) package with an exposed thermal pad. It operates across a wide 1.8V to 5.5V voltage range and integrates a 12-bit ADC, an 8-bit DAC, operational amplifiers, and a Configurable Logic Cell (CLC), making it suited for compact mixed-signal embedded designs. The device supports 5V operation and is qualified to the -40C to +125C extended industrial temperature range, which suits harsh-environment deployments. A 16-bit microcontroller is an MCU whose data path is 16 bits wide, providing higher arithmetic precision and more efficient code density than 8-bit cores while remaining simpler than 32-bit Cortex-M parts. Within the broader taxonomy, the PIC24FV08KM202 belongs to the Microchip PIC24F XLP family, which in turn is part of the Microchip 16-bit MCU portfolio. PIC24F devices target low-power and ultra-low-power (XLP eXtreme Low Power) battery-fed applications, and the KM sub-family is differentiated by its rich analog integration (ADC + DAC + op amps + CLC) in small pin-count packages. Key features of the PIC24FV08KM202-E/ML include 22 GPIO, multiple Capture/Compare/PWM (MCCP/SCCP) modules, an internal 32MHz oscillator, a hardware Real-Time Clock and Calendar (RTCC), and comprehensive reset and supervision: brown-out reset (BOR), low-voltage detect (LVD), power-on reset (POR), and watchdog timer (WDT). Communication options span I2C, SPI, and UART, and the part supports both ISP and JTAG debug. Typical applications include ultra-low-power IoT sensor nodes, portable battery-powered instruments, USB and human-interface device (HID) peripherals, and small consumer devices where code size, low power, and a compact 6x6 mm QFN footprint are all priorities. The device's integrated op amps and DAC also suit it for sensor interface and signal-conditioning front ends. When designing with this MCU, ensure adequate PCB thermal relief under the exposed pad of the QFN-28 package for proper power dissipation, and use a decoupling capacitor network (typically 0.1 uF + bulk) close to each supply pin. For low-power designs, leverage the XLP sleep modes and the RTCC for accurate wake-up scheduling. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in pin-compatible alternatives from the PIC24F family, and practical design notes not found in the manufacturer datasheet - giving engineers a one-stop reference for selecting and sourcing the PIC24FV08KM202-E/ML.

Cotización Contacto

Subcategorías

Productos (32840)

PIC24FJ64GU205-I/M4 - 16-bit USB MCU, 64KB Flash, 48-UQFN | Microchip

PIC24FJ64GU205-I/PT - 16-bit 32MHz 64KB Flash USB MCU | Microchip

PIC24FJ64GU205T-I/M4 - 16-bit MCU, 64KB Flash, USB | Microchip

PIC24FJ64GU205T-I/PT - 16-bit 32MHz 64KB Flash USB MCU TQFP-48

PIC24FJ96GA006-I/MR - 16-bit 16MHz 96KB Flash MCU | Microchip | 64-VQFN

PIC24FJ96GA006-I/PT - 16-bit 96KB Flash MCU 64-TQFP | Microchip

PIC24FJ96GA006T-I/PT - 16-bit 96KB Flash MCU, 64-TQFP | Microchip

PIC24FJ96GA008-I/PT - 16-bit MCU, 96KB Flash, 80-TQFP | Microchip

PIC24FJ96GA008T-I/PT - 16-bit 16MHz 96KB Flash MCU | Microchip

PIC24FJ96GA010-I/PF - 16-bit 96KB Flash MCU, 100-TQFP | Microchip

PIC24FJ96GA010-I/PT - 16-bit 96KB Flash MCU 100-TQFP | Microchip

PIC24FJ96GA010T-I/PT - 16-bit MCU, 96KB Flash, 100-TQFP | Microchip

PIC24FV08KM101-E/P - 8KB Flash 16-bit MCU, 20-PDIP | Microchip

PIC24FV08KM101-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

PIC24FV08KM101-I/P - 8KB Flash 16-bit XLP MCU | Microchip | PDIP-20

PIC24FV08KM101-I/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

PIC24FV08KM101-I/SS - 16-bit XLP MCU, 8KB Flash, 20-SSOP | Microchip

PIC24FV08KM101T-I/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

PIC24FV08KM102-E/SP - 16-Bit MCU, 8KB Flash, 32MHz | Microchip

PIC24FV08KM102-E/SS - 16-bit 32MHz 8KB Flash XLP MCU | Microchip

PIC24FV08KM102-I/SP - 8KB Flash 16-bit MCU, SPDIP-28 | Microchip

PIC24FV08KM102-I/SS - 16-bit XLP MCU, 8KB Flash, 32MHz | Microchip

PIC24FV08KM102T-I/ML - 16-Bit 32MHz 8KB Flash MCU 28-QFN | Microchip

PIC24FV08KM202-E/ML - 16-bit 32MHz 8KB Flash MCU | Microchip