Circuitos integrados

PIC32MK0512GPE064T-E/PT

PIC32MK0512GPE064T-E/PT - 512KB Flash 32-bit MCU, 80MHz | Microchip

The Microchip PIC32MK0512GPE064T-E/PT is a high-performance 32-bit MIPS32 microAptiv microcontroller with 512 KB of Flash and a 64-pin TQFP (10x10 mm) package, qualified to AEC-Q100 for automotive applications. It operates up to 80 MHz with 3.3 V core and integrates DSP instructions, an FPU, and a rich peripheral set including 12-bit ADC, motor-control PWMs, op amps, and CAN-FD. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash + SRAM), and peripherals (ADCs, timers, communication interfaces) on one die. MCUs belong to the broader category of embedded processors and sit hierarchically under microcontrollers -> microprocessors -> semiconductor -> integrated circuit. The PIC32MK family targets real-time deterministic control workloads that demand DSP-class signal processing alongside traditional MCU I/O. Key differentiating features of this part include 512 KB Flash / 64 KB SRAM, a 120 MHz-capable core (run at 80 MHz in the E temperature grade), 8 KB instruction cache, 4 KB data cache, dedicated motor-control peripherals with up to 12 PWM channels, four op amps for current sensing, four 12-bit ADC modules with up to 2 MSPS, and a USB 2.0 Full-Speed OTG controller. The 64-pin TQFP package exposes 53 digital I/O pins. Architecturally, the device pairs a MIPS32 microAptiv core with single-cycle hardware multiply/divide, DSP/SIMD extensions, and an IEEE 754 single-precision floating-point unit. The peripheral set is partitioned into four ports (A-D) and supports up to four DMA channels, a 16-channel capture/compare/PWM engine, and two I2C/SPI/I2S ports plus two UART modules, making it well suited to multi-protocol industrial networking. Typical applications include field-oriented motor control (BLDC, PMSM, ACIM), industrial control loops, automotive body and chassis ECUs, functional-safety supplementary controllers, and Industrial Internet of Things edge nodes. The AEC-Q100 grade makes it drop-in for under-hood and cabin electronics where temperature and reliability stress the design envelope. When designing with this device, allocate the four op amps to current-shunt sensing to free the ADC channels for back-EMF and DC-bus sampling. Ensure the 3.3 V supply is decoupled with at least one 100 nF plus one 4.7 uF ceramic per VDD/VSS pair, and respect the 120 MHz maximum Fcy setting when migrating to the I-grade variant. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found on the manufacturer product page.

Cotización Contacto

PIC32MK0512GPE064T-I/MR

PIC32MK0512GPE064T-I/MR - 120MHz 32-bit MCU | Microchip

The Microchip PIC32MK0512GPE064T-I/MR is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core, operating at 120 MHz with 512 KB Flash and 128 KB SRAM in a 64-pin QFN (9x9 mm) package. The 'GPE' family designation denotes the General Purpose + Enhanced motor-control variant of the PIC32MK series, integrating a rich peripheral set including 12-bit ADC, multiple I2C/I2S, USB FS, and CAN-FD interfaces. A 32-bit MCU (microcontroller unit) is an integrated circuit containing a 32-bit processor core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single die. Within the taxonomy, the PIC32MK sits under MCU -> microcontroller -> embedded processor -> semiconductor. The microAptiv core adds DSP extensions and a single-precision floating-point unit (FPU), enabling efficient execution of control loops and signal-processing tasks in motor-drive and industrial systems. Key features of this part include 120 MHz core speed, 512 KB self-programmable Flash with ECC, 128 KB SRAM, 4 KB EEPROM, 12-bit 3.5 MSPS ADC with up to 32 channels, six UART/SPI, four I2C, six I2S, USB 2.0 Full-Speed with PHY, two CAN 2.0B modules, motor-control PWMs, and quadrature encoder interfaces. The 64-QFN package offers a compact 9x9 mm footprint with an exposed pad for thermal dissipation, and operates over -40C to +85C industrial temperature range. Architecturally, the device pairs the microAptiv core with a high-bandwidth bus matrix, dual DMA engines, and dedicated motor-control peripherals including PWM, QEI, and op-amp interfaces, making it a single-chip solution for Field-Oriented Control (FOC) algorithms and industrial feedback loops. Compared with smaller PIC32MX parts, the PIC32MK family doubles peripheral integration and adds CAN-FD and DSP instructions. Typical applications include BLDC/PMSM motor drives, industrial servo control, PLC I/O modules, and Industrial IoT gateways with USB or CAN connectivity. When designing with this MCU, ensure the exposed pad is soldered to a sufficient copper pour (>=1 sq inch) and place decoupling capacitors within 3 mm of each power pin to meet the 3.5 MSPS ADC noise floor. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design guidance not found in the manufacturer datasheet, helping engineers quickly evaluate the PIC32MK0512GPE064T-I/MR for time-to-market motor-control and industrial designs.

Cotización Contacto

PIC32MK0512GPE064T-I/PT

PIC32MK0512GPE064T-I/PT - 120MHz MCU 512KB Flash 64-TQFP | Microchip

The Microchip PIC32MK0512GPE064T-I/PT is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running up to 120 MHz, integrating 512 KB Flash, 256 KB SRAM, and 4 KB EEPROM in a 64-pin TQFP (10x10 mm) tape-and-reel package. It operates from 2.2 V to 3.6 V across the industrial -40 C to +85 C range. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile and non-volatile memory, and programmable peripherals on a single die. The PIC32MK family is a high-performance 32-bit line built on the MIPS microAptiv core with hardware FPU and DSP extensions, positioning it above traditional 8/16-bit MCUs and alongside Cortex-M4 class devices in the embedded 32-bit hierarchy: MCU -> 32-bit MCU -> Cortex-M/MIPS class -> PIC32MK sub-family. Key features include the MIPS32 microAptiv core with single-precision hardware FPU and DSP extensions, four analog comparators with 12-bit DAC references, configurable logic cells (CLC), and a motor-control PWM peripheral set. The device also integrates a USB 2.0 Full-Speed OTG controller, multiple CAN-FD modules, dedicated ADC channels with up to 12-bit resolution, and high-resolution PWM. The 64-TQFP package exposes up to 53 GPIO lines while preserving analog-rich pin functions. The architecture combines a deterministic interrupt controller with DMA-backed peripheral access, hardware math acceleration, and dual-bus matrix connectivity. ECC protection on Flash and parity on SRAM harden the device for industrial environments; the on-chip FPU supports 1.5 DMIPS/MHz, enabling closed-loop motor control and digital power conversion workloads. Typical applications include industrial motor control (BLDC/PMSM/ACIM), digital power conversion (PFC, LLC, phase-shifted full-bridge), industrial IoT edge nodes, automotive body and accessory ECUs, and multi-axis robotic drives. The CAN-FD and USB-OTG peripherals make it a strong fit for factory-floor communication bridges and field-bus nodes. When designing with this MCU, allocate decoupling capacitance per the datasheet's power-distribution diagram and follow the analog-ground star layout. The recommended alternative is PIC32MK0512GPK064 when a 1 MB Flash upgrade is required without footprint change. This page synthesizes distributor pricing, drop-in alternatives sourced from the Microchip PIC32MK family, and practical design notes not aggregated on any single manufacturer or distributor page.

Cotización Contacto

PIC32MK0512GPE100-I/PT

PIC32MK0512GPE100-I/PT - 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPE100-I/PT is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running at 120 MHz with 512 KB of Flash, 128 KB of SRAM and 4 KB of EEPROM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. This industrial-temperature variant (-40C to +85C) targets motor control, industrial control and Industrial IoT (IIoT) applications where deterministic real-time performance and rich analog peripherals are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripherals on one die. Within the broader taxonomy the PIC32MK0512GPE100 sits in the hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS32 microAptiv core -> PIC32MK family -> semiconductor. It belongs to the same family as the recommended alternative PIC32MK0512GPK100 and combines Cortex-class compute density with DSP extensions and a single-precision FPU. Key features include a 120 MHz MIPS32 microAptiv core with DSP and FPU, 512 KB ECC-capable Flash, 128 KB SRAM, 4 KB EEPROM emulation, USB 2.0 Full-Speed with on-chip PHY, four I2C and six I2S interfaces, dual CAN 2.0B controllers, 12-bit ADC modules with up to 42 analog input channels, multiple motor-control PWMs, and QEI/SQI expansion. Operating voltage spans 2.3V to 3.6V from a single 3.3V rail. The 100-pin TQFP package provides generous I/O for multi-channel motor and industrial sensor interfaces. Architecturally the PIC32MK0512GPE100 combines a 5-stage pipelined MIPS core with Microchip's peripheral-rich bus matrix, dedicated motor-control PWM timers, and high-resolution 12-bit ADCs capable of concurrent sampling - critical for field-oriented control (FOC) loops. The integrated DSP unit accelerates trigonometric and matrix operations common in motor control, while the FPU offloads IEEE-754 single-precision math for sensor-fusion and IIoT edge analytics. Typical applications include BLDC and PMSM motor drives, industrial PLCs, IIoT edge nodes, multi-channel CAN-based automation backbones, USB-connected sensor hubs, and high-performance audio/voice front ends. The PIC32MK silicon targeting 12-bit ADC with dual CAN makes it especially well-suited to factory automation cells and servo drives. When designing with this device, allocate the largest Vcap/Vddcore decoupling capacitor as close to the VCAP pin as the layout allows, and respect the 2.3V-3.6V supply range. For motor-control PCB layout keep the ADC analog ground island separate from the digital ground and join them at a single point near the MCU. This page synthesizes distributor pricing tiers, drop-in alternatives from the same PIC32MK family, and practical design notes not aggregated on the manufacturer datasheet or on any single distributor listing.

Cotización Contacto

PIC32MK0512GPE100T-E/PT

PIC32MK0512GPE100T-E/PT - 120MHz FPU MCU 100-TQFP | Microchip

The Microchip Technology PIC32MK0512GPE100T-E/PT is a 32-bit MIPS32 microAptiv microcontroller with FPU and DSP extensions, integrating 512 KB of Flash and 100-TQFP (12x12 mm) package in an automotive-grade (AEC-Q100) variant. It combines 32-bit 80 MHz (industrial grade up to 120 MHz) performance with a rich peripheral set targeting motor control, industrial control and Industrial Internet of Things (IIoT) applications, plus multi-channel CAN FD interfaces. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, memory (Flash, SRAM), and peripherals (timers, ADC, communication interfaces) on a single silicon die. The PIC32MK belongs to the MIPS32 microAptiv family - a Harvard-architecture core family widely used in signal-processing and motor-control applications. Within the broader taxonomy, this part is a microcontroller -> embedded processor -> semiconductor IC, with the FPU/DSP extensions placing it in the high-performance motor-control MCU segment. Key features include a 32-bit MIPS32 microAptiv core with single-precision FPU and DSP instructions, 512 KB Flash program memory, 64 KB SRAM, four pairs of differential ADC modules capable of high-speed motor-control sampling, multiple CAN FD controllers, motor-control PWMs with high-resolution capability, and a full Peripheral Pin Select (PPS) system for flexible signal routing. Technically, the PIC32MK uses a 4-wire MIPS standard trace/debug interface and supports DSP/SIMD instructions via the microAptiv core, achieving deterministic motor-control loop times while running signal-processing algorithms. The device integrates dedicated motor-control peripherals (PWM, QEI, BiSS, and analog comparators) tightly coupled to the CPU bus, reducing latency for field-oriented control (FOC) loops. Typical applications include BLDC/PMSM motor control, industrial PLCs, multi-axis servo drives, CAN-FD networked sensor nodes, and IIoT edge controllers. The wide AEC-Q100 automotive temperature range (-40C to +125C) also suits under-hood automotive ECUs. When designing with this part, plan the Peripheral Pin Select (PPS) mapping early to avoid pin conflicts, and allocate the four SAR ADC pairs carefully for current-sensing accuracy. The QFP package's exposed thermal pad is recommended for high-duty-cycle motor drive firmware. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet - giving engineers a faster path from datasheet to prototype.

Cotización Contacto

PIC32MK0512GPG048-E/7MX

PIC32MK0512GPG048-E/7MX - 120MHz MCU 512K Flash 48-VQFN | Microchip

The Microchip PIC32MK0512GPG048-E/7MX is a 32-bit MIPS32 microAptiv PIC microcontroller combining 120MHz CPU performance, 512KB of ECC-protected Flash, and 64KB SRAM in a 48-pin VQFN (7MX) package. This general-purpose + motor-control variant targets high-performance embedded applications that demand DSP capability, FPU hardware, and CAN-FD connectivity in a compact 6x6 mm footprint. The -E suffix indicates the extended industrial temperature grade (-40C to +125C). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO) into one package. Within the broader taxonomy, the PIC32MK0512 sits in the PIC32MK family of 32-bit microcontrollers, which itself belongs to the Microchip PIC32 family, and ultimately to the wider class of RISC microcontrollers / embedded controllers used in motor control, industrial automation, and IIoT. This is a sub-family of PIC microcontrollers, which are 8-/16-/32-bit MCUs based on Microchip's proprietary MIPS-derived architecture. Key features include hardware Floating Point Unit (FPU), DSP extensions on the microAptiv core, 4 DMA channels for low-overhead data movement, multiple 16-bit PWM outputs suitable for 3-phase motor control, 12-bit ADC at up to 3.5 MSPS, and a CAN-FD peripheral. The ECC-protected Flash improves reliability in electrically noisy environments by detecting and correcting single-bit memory errors. The 48-VQFN package enables compact PCB designs while still exposing a generous pin count for analog, communication, and timer resources. Typical applications include BLDC/PMSM motor control (FOC), industrial control PLCs, multi-channel sensor data acquisition, IIoT edge nodes with CAN-FD backbone, and digital power conversion. The integrated DSP/FPU and motor-control PWM peripherals make this MCU especially well-suited for field-oriented control algorithms running at high PWM frequencies. When designing with this device, pay close attention to the ICSP programming pins (PGECx/PGEDx pairs are not interchangeable), allocate sufficient decoupling on AVDD/VDD rails, and review the datasheet for the specific peripheral pinout (this -7MX suffix is the 48-VQFN pinout). The CAN-FD peripheral must be configured for the correct bit-timing to operate reliably on your chosen bus speed. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MK0512GPG048-E/Y8X

PIC32MK0512GPG048-E/Y8X - 32-bit MCU, 120MHz, 512KB Flash | Microchip

The Microchip PIC32MK0512GPG048-E/Y8X is a 32-bit MIPS32 microAptiv microcontroller operating at up to 120 MHz with 512 KB of ECC-protected Flash and 64 KB SRAM, housed in a 48-pin TQFP (Y8X) package. It integrates a single-precision FPU, CAN FD, op-amps, and a rich peripheral mix aimed at general-purpose and motor-control applications. Operating voltage is 2.3V to 3.6V across an automotive-grade -40C to +125C temperature range. What is a 32-bit microcontroller? A 32-bit MCU is a single-chip computer that fetches and executes 32-bit-wide instructions, exposing significantly higher throughput, larger linear address space, and richer peripherals than 8-bit or 16-bit counterparts. Within Microchip's taxonomy, the PIC32MK family sits between the PIC32MX (general purpose) and PIC32MZ (high performance) families, optimized for industrial control, motor drive, and IIoT. The microAptiv core adds DSP ASE instructions and a hardware FPU, lifting it above classic MIPS MCUs. Key features of the PIC32MK0512GPG048-E/Y8X include up to 120 MHz CPU clock (DC to 120 MHz at -40C to +85C, derated to 80 MHz at +125C), 512 KB Flash with ECC, 64 KB SRAM, 37 user I/O, four op-amp peripherals, multiple CAN FD ports, and PPS (Peripheral Pin Select) for flexible pin mapping. The integrated op-amps reduce BOM in motor-control current-sense paths. Architecturally, the device combines the microAptiv core with a high-speed peripheral bus, dual 12-bit ADCs (up to 28 Msps combined), 16-bit PWM timers with duty-cycle resolution suitable for field-oriented control (FOC), and dedicated quadrature encoder interfaces. ECC on Flash and RAM improves reliability in long-life industrial deployments. Typical applications include industrial motor control (BLDC, PMSM, stepper), factory automation, Industrial Internet of Things (IIoT) edge nodes, digital power conversion, automotive body and chassis subsystems, and CAN FD networked sensors. The op-amps and PWMs especially suit three-phase FOC motor drives. When designing with this part, place 0.1 uF and 1 uF decoupling caps adjacent to every VDD/VSS pin pair, and route the analog AVSS/AVDD pair with a star-ground topology. Use the on-chip op-amps for current sensing to reduce component count; configure the FPU and DSP ASE instructions via the compiler's -mhard-float and -mdsp flags. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MK family, and practical design notes not found in the manufacturer datasheet, delivering cross-brand context for engineers evaluating the PIC32MK0512GPG048-E/Y8X.

Cotización Contacto

PIC32MK0512GPG048-I/7MX

PIC32MK0512GPG048-I/7MX - 32-bit MCU, 120MHz, 512KB Flash, 48-VQFN | Microchip

The Microchip Technology PIC32MK0512GPG048-I/7MX is a 32-bit MIPS32 microAptiv PIC32MK microcontroller operating at 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM, housed in a 48-pin VQFN (6x6 mm) package. Headline parameters are 120 MHz CPU core speed, 512 KB Flash with ECC, 64 KB SRAM, and integrated CAN FD, FPU, and DSP extensions for high-performance real-time control. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, Flash program memory, SRAM data memory, and a rich peripheral set on one die. The PIC32MK family is positioned in Microchip's PIC32 lineup as a high-performance general-purpose and motor-control platform, sitting architecturally above the PIC32MX and PIC32MM lines. Within the PIC32MK taxonomy, the GPG family adds CAN FD and ECC, and the 0512GPG048 sub-variant specifically targets 512 KB Flash / 64 KB RAM / 48-pin compact designs. Compared with an 8-bit MCU such as PIC16, a 32-bit MIPS core offers 4-byte instruction throughput, hardware FPU single-precision floating-point, and DSP-oriented MAC units. Key features include a hardware Floating Point Unit (FPU) for IEEE-754 single-precision math, DSP extensions for signal processing, 5V-tolerant I/O with up to 22 mA source/sink, selectable internal pull-ups, pull-downs, and open-drain modes, five programmable edge/level-triggered interrupt pins, and external interrupts on all GPIO. The 48-VQFN package supports surface-mount manufacturing with a small 6x6 mm footprint and an exposed pad for thermal dissipation. The PIC32MK0512GPG048-I/7MX combines a MIPS32 microAptiv core with deterministic interrupt response, hardware FPU, and DSP MACs. The ECC-protected Flash improves reliability in industrial environments by detecting and correcting single-bit errors in program memory, reducing the risk of firmware corruption in long-lifecycle deployments. The integrated CAN FD peripheral enables higher-bandwidth automotive and industrial networking than classic CAN 2.0B. Typical applications include industrial motor control (BLDC/PMSM/servo drives), industrial automation and PLC I/O modules, Industrial Internet of Things (IIoT) edge nodes, multi-channel ADC-based sensor conditioning, and automotive body/comfort modules requiring CAN FD. The combination of FPU and DSP MACs accelerates field-oriented control (FOC) loops commonly used in motor drives. When designing with this part, ensure the exposed thermal pad is properly soldered to a sufficient copper pour for heat dissipation. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed as close as possible to the IC pins. For CAN FD networks, terminate the bus with 120 ohm resistors at each end and verify the CAN transceiver slew rate is configured for the chosen bitrate. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an independent reference for engineers evaluating the PIC32MK0512GPG048-I/7MX for motor control and industrial IIoT designs.

Cotización Contacto

PIC32MK0512GPG048-I/Y8X

PIC32MK0512GPG048-I/Y8X - 120MHz MCU 512KB Flash 48-TQFP | Microchip

The Microchip PIC32MK0512GPG048-I/Y8X is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC running at 120 MHz, with 512 KB of ECC-protected Flash and 64 KB of SRAM in a 48-pin TQFP (7x7 mm) package. The /Y8X suffix denotes a tray packaging option, while the -I suffix indicates an industrial operating temperature range. This part belongs to the PIC32MK General Purpose (GPG) family with CAN FD, FPU, and DSP extensions. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), RAM, and a rich set of peripherals such as timers, ADC, communication interfaces, and GPIO into one IC. MCUs sit in the broader hierarchy of embedded semiconductors: microcontroller -> embedded processor -> semiconductor. Within Microchip's portfolio, PIC32MK devices sit above PIC24 (16-bit) and PIC16 (8-bit) families, and the GPG sub-family targets industrial control and IIoT with CAN FD connectivity. Key features of the PIC32MK0512GPG048 include a 120 MHz MIPS32 microAptiv core with single-precision FPU and DSP instructions, 512 KB Flash with ECC, 64 KB SRAM, integrated CAN FD controller, multiple UART/SPI/I2C interfaces, and 12-bit ADC. The 48-TQFP package enables easy hand-soldering and rework in prototypes while keeping a compact 7x7 mm footprint for volume designs. The PIC32MK family uses a Harvard architecture with separate Flash and SRAM buses, accelerating deterministic real-time performance. ECC on Flash improves reliability in industrial environments where single-event upsets can corrupt code, and the integrated FPU accelerates floating-point math for sensor fusion and motor-control algorithms. Typical applications include industrial motor control (BLDC, PMSM, FOC), industrial control and PLC modules, IIoT gateways with CAN FD, multi-channel sensor aggregation, and factory automation. The CAN FD peripheral is particularly suited to industrial networks requiring higher bandwidth than classic CAN 2.0B. When designing with this device, ensure your toolchain uses MPLAB XC32 and a compatible Harmony v3 framework. Decoupling capacitors (100 nF + bulk) must be placed close to all VDD pins. Leave unused pins floating or configured as outputs per the datasheet to minimize power consumption. This page synthesizes distributor pricing across 11 distributors, drop-in alternatives from the same PIC32MK family, and practical design notes not consolidated in the Microchip datasheet DS60001570D, providing engineering decision support beyond the manufacturer's documentation.

Cotización Contacto

PIC32MK0512GPG048T-I/7MX

PIC32MK0512GPG048T-I/7MX - 120MHz 32-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPG048T-I/7MX is a high-performance 32-bit microcontroller from the PIC32MK family, featuring a MIPS32 microAptiv core running at up to 120 MHz, 512 KB of ECC-protected Flash, and 64 KB of SRAM, all housed in a 48-pin VQFN (6x6 mm) package. The 'T' suffix denotes tape-and-reel packaging and the 'I' indicates the industrial -40C to +85C operating temperature range, making this part suitable for production-line automated assembly. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, volatile memory (SRAM), non-volatile program memory (Flash), and a rich set of peripherals (timers, ADC, communication interfaces) on a single silicon die. Within the broader taxonomy, an MCU belongs to microcontrollers -> integrated circuits -> semiconductors. The PIC32MK family uses the MIPS32 microAptiv architecture, a Harvard-style RISC core that delivers deterministic interrupt latency and DSP-friendly multiply-accumulate instructions, competing directly with ARM Cortex-M4 class devices. Key differentiating specifications include the 120 MHz maximum core frequency with single-cycle hardware multiply and a hardware floating-point unit (FPU), ECC protection on Flash memory for safety-critical firmware integrity, and a peripheral set tailored for motor control and industrial automation. The 48-VQFN (6x6) package offers a small footprint while exposing pins for up to four 16-bit timers, multiple UART/SPI/I2C interfaces, and high-resolution PWMs. The PIC32MK architecture uses a 5-stage pipeline with branch prediction, supporting 1.56 DMIPS/MHz. ECC on Flash corrects single-bit errors and detects double-bit errors in real time, critical for IEC 60730 class B safety compliance. The integrated FPU accelerates floating-point math common in motor control algorithms such as field-oriented control (FOC). Typical applications include industrial motor drives, servo control, PLC modules, industrial IoT edge nodes, and digital power conversion. The peripheral mix also suits multi-channel sensor aggregation and CAN-FD-equipped industrial networking. Designers should allocate sufficient decoupling (100 nF plus 4.7 uF bulk near VDD) and follow the 4-layer PCB stack-up recommendation in the datasheet to meet EMI/EMC targets. The internal voltage regulator requires an external 10 uF capacitor on the VCAP pin. This page synthesizes distributor pricing, drop-in alternative cross-references, and engineering design notes not found in the manufacturer datasheet alone.

Cotización Contacto

PIC32MK0512GPG048T-I/Y8X

PIC32MK0512GPG048T-I/Y8X - 120MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPG048T-I/Y8X is a 32-bit MIPS32 microAptiv PIC32MK microcontroller operating at up to 120 MHz, integrating 512 KB of Flash program memory and 64 KB of SRAM into a 48-pin TQFP (7x7 mm) package. The 'GP' (General Purpose) variant delivers high-performance compute without on-board CAN-FD, and is rated for the industrial -40C to +85C temperature range, making it well suited to factory automation, motor-control backplanes, and IIoT edge nodes that need deterministic real-time behaviour. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and I/O. Within the broader embedded hierarchy, the PIC32MK family sits between 8-bit PIC MCUs and full application processors, combining deterministic interrupt response with the peripheral bandwidth and code density needed for connected industrial equipment. Key features of the PIC32MK0512GPG048T-I/Y8X include ECC-protected Flash for robust code storage, a high-speed 12-bit ADC, multiple PWM modules suitable for motor control, and a flexible communication set covering I2C, SPI, UART, USART, IrDA, and LIN. The 120 MHz core with its hardware multiply/divide and DSP extensions enables real-time DSP and control-loop computation alongside housekeeping tasks. The device supports 2.3V to 3.6V single-supply operation, simplifying power-tree design, and integrates brown-out reset, watchdog timer, and code-protect features for industrial safety. Its peripheral touch (PTC) and high-resolution PWM make it a strong fit for digital-power conversion and BLDC/PMSM drives in the same platform. Typical applications include industrial motor control, multi-channel sensor conditioning, IIoT edge gateways, general-purpose digital-power conversion, and high-performance consumer/HMI control. The wide operating voltage range and rich analog front end allow direct interface with motor-current shunts and resolver front ends. When designing with this part, decouple VDD/VSS with a 1 uF bulk plus 100 nF ceramic near each VDD pin, follow Microchip's "minimum-viable" PCB layout guidelines for high-speed ADC accuracy, and use MPLAB Harmony v3 code configurators to shorten firmware development for motor-control and IIoT applications. This page consolidates distributor pricing, drop-in package alternatives, and engineering design notes not found in the manufacturer datasheet to accelerate your selection process for 32-bit PIC32MK designs.

Cotización Contacto

PIC32MK0512GPG064-E/PT

PIC32MK0512GPG064-E/PT - 32-Bit MCU, 512KB Flash, 64-TQFP | Microchip

The Microchip Technology PIC32MK0512GPG064-E/PT is a 32-bit MIPS32 microAptiv PIC32MK microcontroller with 512KB of ECC-protected Flash memory, 64KB of SRAM, and a maximum CPU clock of 80 MHz, housed in a 64-pin TQFP (10x10 mm, 0.5 mm pitch) extended-temperature-grade package. The part combines DSP-class math performance with a rich analog and communication peripheral set aimed at motor control, industrial automation, and Industrial Internet of Things (IIoT) applications. What is a PIC32MK microcontroller? The PIC32MK is a family of high-performance 32-bit microcontrollers from Microchip Technology built on the MIPS32 microAptiv core with DSP extensions and dual-panel FPU. In the broader taxonomy, it sits as: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MK sub-family. PIC32MK devices target real-time control applications by combining DSP throughput, math accelerators, 12-bit ADC at high sample rates, high-resolution PWM, and on-chip op-amps traditionally required for digital power conversion and field-oriented motor control. Key features of the PIC32MK0512GPG064-E/PT include 512KB Flash with ECC, 64KB SRAM, four I2C, four SPI, six UART, four CAN-FD ready peripheral sets (CAN-FD not enabled on the GPG variant), USB-FS/Host/Device, 12-bit 3.75 Msps ADC with up to 42 analog inputs, and configurable logic cells. The -E/PT suffix indicates the extended (-40C to +125C) operating temperature grade and 64-pin TQFP industrial/automotive packaging. AEC-Q100 qualification is part of the family roadmap for selected part numbers. The architecture integrates a 32-bit MIPS32 microAptiv core with microMIPS instruction support, DSP ASE, and a hardware multiply/divide unit. A peripheral trigger system provides deterministic ADC and PWM synchronization, and a 4-channel high-speed op-amp front-end simplifies current-sense signal conditioning for FOC motor control loops. Typical applications include BLDC/PMSM motor control (FOC), industrial PLC modules, solar micro-inverters, digital power conversion, multi-channel data acquisition systems, and IIoT edge nodes with USB-CDC bridge connectivity. The wide temperature grade makes the -E/PT suitable for harsh industrial enclosures and under-hood automotive subsystems. When designing with this part, allocate sufficient PCB copper for the exposed thermal pad, keep ADC analog traces short and length-matched, and reference the family's Motor Control or General Purpose plug-in modules in MPLAB Harmony for code generation. This page synthesizes distributor pricing, same-family and cross-brand drop-in alternatives, and practical design notes not collected in the manufacturer datasheet, helping engineers shorten the BOM selection cycle.

Cotización Contacto

PIC32MK0512GPG064-E/R4X

PIC32MK0512GPG064-E/R4X - 120MHz MCU 512KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MK0512GPG064-E/R4X is a 32-bit MIPS microAptiv microcontroller with 120MHz core speed, 512KB ECC-protected Flash, 64KB SRAM, and 53 I/O pins housed in a 64-pin VQFN (9x9mm) package. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals into one device. 32-bit MCUs like the PIC32MK use a wider data path than 8/16-bit MCUs, enabling higher computational throughput and direct handling of larger data types — useful for digital signal processing, complex state machines, and protocol stacks. The PIC32MK family specifically sits between traditional 8-bit PIC MCUs and Microchip's higher-end Cortex-M SAM families, targeting motor control, industrial automation, and IIoT edge nodes. Key features include 512KB of Flash with Error-Correcting Code (ECC) for high-reliability applications, 64KB of SRAM, a Floating Point Unit (FPU), multiple UART/SPI/I2C/CAN-FD peripherals, operational amplifiers on chip, and a 12-bit ADC with up to 3.5 MSPS sampling rate. The 120MHz core combined with the MIPS microAptiv architecture delivers 198 DMIPS of computational throughput. The 64-VQFN package with exposed thermal pad enables compact PCB designs while supporting 53 user I/O for flexible peripheral assignment. The device is built on a CMOS process and operates from 2.3V to 3.6V. The GPG designation indicates the General Purpose variant without CAN-FD (the GP versions omit CAN-FD compared to the MC/MCJ motor-control family variants). Multiple timer modules, PWM outputs, and quadrature encoder interfaces support closed-loop motor control firmware patterns common in industrial drives and robotics. Typical applications include industrial control PLCs, motor control boards (BLDC/PMSM drives), IIoT sensor hubs, building automation controllers, and digital power conversion. The combination of FPU, hardware op-amps, and high-resolution PWM makes it well-suited for field-oriented control (FOC) loops. The extended -40C to +125C operating temperature range also supports outdoor and automotive under-hood environments. When designing with this MCU, ensure proper decoupling of VDD/VSS pairs (one 100nF per adjacent pair, one bulk 10uF) and short traces to the 9x9mm QFN thermal pad, which should be soldered to a thermal via array. The Microchip Harmony framework and MPLAB X IDE provide configuration tools to map peripherals and generate initialization code.

Cotización Contacto

PIC32MK0512GPG064-I/PT

PIC32MK0512GPG064-I/PT - 120MHz MCU, 512KB Flash, 64-TQFP | Microchip

The Microchip Technology PIC32MK0512GPG064-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at up to 120 MHz, integrating 512 KB of Flash program memory and 64 KB (reported as 65.5 KB by some sources) of SRAM in a 64-pin TQFP (10x10 mm, 0.5 mm pitch) package. This GPG-family device is the general-purpose variant of the PIC32MK series, targeted at motor control, industrial control, and Industrial Internet of Things (IIoT) applications, and it ships as the industrial (-40C to +85C) operating-temperature grade. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. Within the broader semiconductor taxonomy, an MCU sits at the leaf of the digital IC hierarchy: MCU -> microcontroller -> embedded processor -> integrated circuit -> semiconductor. The microAptiv core implements the MIPS32 instruction set and adds DSP extensions and a single-precision FPU, giving the PIC32MK class deterministic real-time performance with hardware multiply-accumulate support. Key differentiating features of this part include 120 MHz core speed, 512 KB ECC-protected Flash, 64 KB SRAM, a high-performance analog front-end with multiple 12-bit ADC modules, configurable logic cells (CLC) and multi-output Capture/Compare/PWM (MCCP) timers suitable for advanced motor-control and power-conversion topologies, plus CAN-FD-capable communication blocks on the family. The GPG064 device is the 64-pin general-purpose variant; the family also offers higher-pin-count (GPE100) and motor-control (MCM) derivatives. Compared with the legacy PIC32MX family, PIC32MK offers significantly more analog and PWM resources while retaining the familiar MPLAB X IDE and Harmony ecosystem. The PIC32MK architecture pairs a 5-stage pipeline MIPS32 microAptiv core with dedicated DSPASE and FPU pipelines, allowing the CPU to handle DSP and floating-point work concurrently with integer execution. Bus arbitration is handled by a separate Bus Matrix unit, and Flash read/write accesses use ECC for industrial-grade reliability. The rich timer/CLC fabric means software-defined peripherals can be assembled for driving multi-phase BLDC, PFC stages, or digital power loops without external logic. Typical applications include industrial motor control (BLDC/PMSM/ACIM drives), PLC and industrial control boards, multi-channel sensor-fusion front-ends, IIoT edge nodes with CAN-FD connectivity, and high-channel-count data-acquisition systems. The 64-pin TQFP footprint makes it suitable for through-hole-friendly assembly or hand-prototyping on 2-layer boards. Design considerations: confirm whether you need the CAN-FD peripheral (present in the wider GPK family but explicitly listed as NO CAN-FD on the GPG064 variant by some distributor listings - verify against the latest Microchip datasheet DS60001570 before committing). Provide adequate decoupling (100 nF plus 4.7 uF bulk) per supply pin group and keep the analog AVss/AVdd pair isolated from noisy digital returns. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MK family, and practical design notes not aggregated on any single manufacturer or distributor page.

Cotización Contacto

PIC32MK0512GPG064T-I/PT

PIC32MK0512GPG064T-I/PT - 120MHz 32-bit MCU 512KB Flash 64-TQFP | Microchip

The Microchip Technology PIC32MK0512GPG064T-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running up to 120 MHz, integrating 512 KB of Flash program memory and 64 KB of data RAM in a 64-pin TQFP (10x10 mm) package. The device is built on a CMOS process and is qualified for industrial temperature range (I-grade) with a Tape & Reel ("T") packaging option. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a CPU core, non-volatile program memory, volatile data memory, and a rich set of analog and digital peripherals on a single die. PIC32MK microcontrollers sit in the hierarchy: microcontroller -> embedded processor -> semiconductor IC, and combine high-performance MIPS32 processing with DSP instructions and a single-precision hardware FPU. Key features include 512 KB of ECC-protected Flash, 64 KB SRAM, four I2C, four UART, three SPI, two I2S interfaces, up to 30 channels of 12-bit ADC, two 12-bit DACs, and motor-control PWMs that make it ideal for digital power conversion and field-oriented control. The 64-pin TQFP footprint is part of the TQFP family in the surface-mount QFP family of packages, allowing PCB layout reuse across the GPK/GPL/MCM PIC32MK variants. The PIC32MK architecture integrates dedicated motor-control peripherals, programmable analog op-amps, and high-resolution PWM with 7.5 ns resolution, enabling single-chip FOC motor drives up to several kW. ECC on Flash and parity on RAM improve functional safety for IEC 60730 class B end-equipment, while the 120 MHz core with FPU accelerates control-loop math at low latency. Typical applications include industrial motor control (BLDC/PMSM FOC drives), digital power supplies, PLCs and industrial control, IIoT edge nodes, factory automation, and uninterruptible power supplies. The "T" suffix designates Tape & Reel packaging for high-volume assembly, while the "-I" suffix denotes the -40C to +85C industrial temperature grade. When designing with this part, provide decoupling per the datasheet: 0.1 uF + bulk capacitance close to each VDDCORE/VDDIO pair, route analog and digital grounds as split planes joined at one point, and use MPLAB X IDE with the XC32 compiler for firmware development. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not aggregated on the manufacturer datasheet.

Cotización Contacto

PIC32MK0512GPG064T-I/R4X

PIC32MK0512GPG064T-I/R4X - 120 MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MK0512GPG064T-I/R4X is a 32-bit MIPS32 microAptiv PIC microcontroller operating at up to 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. The device targets industrial control, motor control, and Industrial Internet of Things (IIoT) applications, delivering deterministic real-time performance and a rich analog and digital peripheral set. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory, data RAM, and a wide array of on-chip peripherals such as timers, ADC/DAC, communication interfaces (UART, SPI, I2C), and PWM channels. Within the broader taxonomy, the PIC32MK belongs to the family of 32-bit Flash microcontrollers -> microcontrollers -> embedded processors -> semiconductors. PIC32MK devices specifically target motor control and industrial applications with their FPU, DSP extensions, and CAN FD connectivity. Key features of the PIC32MK0512GPG064T-I/R4X include a single-core MIPS32 microAptiv core with hardware multiply/divide and DSP extensions, four 16-bit analog op amps usable as programmable gain amplifiers, four 12-bit ADC modules with up to 42 analog inputs, multiple CAN FD ports, USB-FS Host/Device, and configurable logic cells. The 120 MHz core delivers 25.5 DMIPS / 142 CoreMark performance with hardware floating point support. ECC on Flash and SRAM improves reliability in harsh industrial environments. The architecture combines a deterministic interrupt controller with flexible peripheral trigger system, enabling tightly coupled motor control loops. The device supports 5V tolerant I/O on most pins, simplifying interfacing to legacy industrial sensors and actuators. Integrated op amps and 12-bit ADCs at 1.5 Msps enable single-chip current and voltage sensing for field-oriented control (FOC) of three-phase motors. Typical applications include BLDC/PMSM motor control (drones, e-bikes, industrial drives), solar inverters and string combiners, industrial PLC modules, IIoT edge nodes with CAN FD connectivity, building automation HVAC controllers, and multi-channel data acquisition systems. The wide operating temperature range of -40C to +85C supports outdoor and industrial deployments. When designing with this MCU, route analog and digital grounds as separate planes joined at a single point under the package, and use the 4 onboard op amps for current shunt amplification rather than external amplifiers to reduce BOM cost. Verify that CAN FD bit timing configuration matches the selected transceiver's propagation delay budget. This page synthesizes distributor pricing, drop-in PIC32MK family alternatives, and practical design notes not found in the standalone manufacturer datasheet, with cross-references to engineering guides for motor control and industrial IO.

Cotización Contacto

PIC32MK0512GPK064-E/PT

PIC32MK0512GPK064-E/PT - 120MHz 512KB MCU with USB FS | Microchip

The Microchip PIC32MK0512GPK064-E/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at 120 MHz with 512 KB of ECC-protected Flash memory in a 64-pin TQFP (10x10 mm) package. It integrates a USB Full-Speed (USB FS) transceiver, a 12-bit ADC, multiple general-purpose timers, and rich connectivity peripherals designed for motor control, industrial control, and Industrial Internet of Things (IIoT) applications. Operating voltages are 2.5 V and 3.3 V, supplied by the on-chip LDO and the integrated 120 MHz PLL. The part is rated for the extended -40C to +125C industrial temperature range, denoted by the -E suffix, and the /PT suffix denotes the TQFP-64 package. A 32-bit microcontroller (MCU) is a microprocessor core combined with on-chip memory, peripherals, and interfaces on a single die. The PIC32MK family uses the MIPS32 microAptiv core, which sits within the broader hierarchy of 32-bit microcontrollers -> embedded microcontrollers -> microprocessors -> integrated circuits. It is also closely related to the PIC microcontroller family and shares the PIC instruction set architecture, giving engineers access to the MPLAB X IDE, MPLAB Harmony framework, and the vast PIC library ecosystem. 32-bit MCUs are widely used where 8-bit and 16-bit parts run out of CPU headroom, headroom that microAptiv provides through 120 MHz core clock, hardware multiply/divide, and 64 KB SRAM-backed data path. Key features of the PIC32MK0512GPK064-E/PT include the 120 MHz core, 512 KB Flash with ECC, 64 KB SRAM (typical for the family), a 12-bit ADC with multiple conversion channels, USB Full-Speed device/host/OTG capability, multiple UART/SPI/I2C peripherals, and motor-control PWM modules. ECC on the Flash improves reliability in noisy industrial environments, while the integrated USB FS eliminates the need for a standalone transceiver, reducing BOM cost and PCB area. The TQFP-64 (10x10 mm) package provides 49 general-purpose I/O pins that remain after dedicated peripheral assignments, giving plenty of routing freedom for mixed-signal designs. Typical applications include BLDC/PMSM motor control drives, industrial PLC modules, IIoT edge nodes, factory automation controllers, multi-channel sensor hubs, and USB peripherals. The combination of 120 MHz performance, ECC Flash, and motor-control PWM makes this part a strong fit for cost-sensitive industrial designs that must survive the -40C to +125C range. Designers should note that the -E variant supports -40C to +125C, while the -I variant supports -40C to +85C for commercial/industrial settings. Choose the E grade for harsh-environment industrial deployment. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MK family, and practical design notes that go beyond the manufacturer datasheet.

Cotización Contacto

PIC32MK0512GPK064-I/MR

PIC32MK0512GPK064-I/MR - 120MHz 512KB MCU, 64-QFN | Microchip

The Microchip Technology PIC32MK0512GPK064-I/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC running at 120 MHz, integrating 512 KB (512K x 8) of ECC-protected Flash, 4 KB EEPROM, and 128 KB SRAM in a 64-pin QFN (9x9 mm) package. It targets motor control, industrial control, and Industrial Internet of Things (IIoT) applications, and is specified for an industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The PIC32MK family belongs to the 32-bit MCU hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. Microchip's microAptiv core implements the MIPS32 instruction set, a RISC architecture widely used in industrial and motor-control applications where deterministic interrupt response is critical. Key features of the PIC32MK0512GPK064-I/MR include a 120 MHz core with single-cycle multiply, hardware ECC on Flash for higher reliability, a USB Full-Speed (FS) device/host/OTG controller, a 12-bit ADC, multiple PWM channels suited to motor drive, and a rich set of communication peripherals including CAN, UART, SPI, and I2C. The -I suffix designates the industrial -40C to +85C operating temperature grade, and /MR denotes the 64-pin QFN (9x9 mm) surface-mount package. Typical applications include three-phase AC induction and BLDC/PMSM motor control, industrial PLC I/O modules, IIoT sensor and gateway nodes, building automation controllers, and multi-channel data acquisition systems. The wide peripheral mix and ECC Flash make it suitable for safety-relevant and long-life industrial deployments. When designing with this part, verify that the 2.3V to 3.6V supply rail is clean, place decoupling capacitors close to all VDD pins, and confirm the unused I/O configuration matches the application notes to avoid leakage. Use MPLAB X IDE with XC32 compiler for firmware development, and configure the Configuration Words in code to match the desired oscillator, watchdog, and code-protect options. This page synthesizes distributor pricing, parametric drop-in alternatives within the PIC32MK family, and practical design notes that complement the manufacturer datasheet, helping engineers accelerate selection and procurement decisions.

Cotización Contacto

PIC32MK0512GPK064-I/PT

PIC32MK0512GPK064-I/PT - 120MHz 512KB MCU | Microchip Technology

The Microchip Technology PIC32MK0512GPK064-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv MCU core with integrated single- and double-precision Floating Point Unit (FPU), operating at up to 120 MHz, with 512 KB of ECC-protected dual-panel Flash memory and a rich motor-control peripheral set, housed in a 64-pin TQFP (10x10 mm) package. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a CPU core, program memory, RAM, and peripherals on a single silicon die. The PIC32MK family specifically targets motor control, industrial control, industrial IoT (IIoT), and multi-channel analog sensing applications by combining deterministic DSP performance with industrial-grade communication interfaces (CAN-FD, USB-FS, UART/SPI/I2C). Key features include 120 MHz core clock with MicroMIPS mode enabling 40% smaller code size, four 64-bit accumulators, single-cycle MAC for saturating and fractional math, dual-panel ECC Flash for safe firmware updates, 12-bit multi-channel ADC, dedicated Motor Control PWM (MCPWM) peripherals, CAN-FD, USB Full-Speed, and a wide 3.0V to 3.6V supply range over the -40°C to +85°C industrial temperature grade. The microAptiv core with hardware FPU accelerates floating-point motor-control algorithms (FOC, Clarke/Park transforms, PID loops) that previously required fixed-point approximations. Dual-panel Flash with ECC supports in-field firmware updates with zero downtime - the inactive panel is rewritten while the active panel continues execution, then a hardware switch swaps them atomically. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, industrial PLC modules, multi-channel data acquisition systems, solar inverters, and CAN-FD networked sensor hubs. The MCPWM peripherals provide complementary PWM with hardware dead-time insertion and ADC triggering, reducing CPU load in field-oriented control loops. When designing with this device, prioritize PCB layout for the analog inputs: route ADC reference and analog supply separately from digital rails, and place 100 nF decoupling capacitors as close to every supply pin as possible to preserve ADC SNR. This page synthesizes distributor pricing, drop-in same-package alternatives, and application-specific design notes not consolidated in the manufacturer datasheet, providing an information-gain resource for engineers evaluating the PIC32MK GPK family.

Cotización Contacto

PIC32MK0512GPK064T-E/MR

PIC32MK0512GPK064T-E/MR - 120MHz, 512KB Flash MCU | Microchip

The Microchip PIC32MK0512GPK064T-E/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running at 120MHz with 512KB of ECC-protected Flash and 64KB of RAM, housed in a 64-pin QFN (9x9 mm) package. The device integrates a Floating Point Unit (FPU) for single/double precision math, MicroMIPS mode for up to 40% code-size reduction, four 64-bit accumulators, and a single-cycle MAC supporting saturating and fractional math. On-chip peripherals include a USB Full-Speed device/host/OTG controller, multiple 12-bit ADC modules, CAN-FD-capable controllers, high-resolution PWM aimed at motor control, and a rich communication set (UART, SPI, I2C, SENT). A 32-bit microcontroller (MCU) is a programmable system-on-chip combining a high-performance processor core, volatile and non-volatile memory, and a peripheral set on a single silicon die. Within the broader semiconductor taxonomy, MCUs belong to the embedded processor category (microcontroller -> embedded processor -> logic IC -> semiconductor). The microAptiv core is a synthesizable MIPS32 core designed for low-power deterministic real-time control, balancing DSP-class arithmetic throughput with deterministic interrupt latency required by industrial closed-loop systems. ECC-protected Flash extends reliability in harsh industrial and automotive environments by detecting and correcting single-bit memory errors. Key features of this part include: 120MHz CPU clock with 1.56 DMIPS/MHz, hardware FPU, 512KB dual-panel Flash, 64KB SRAM, four DMA channels, six UART, four SPI, four I2C, two CAN-FD, two 12-bit ADC modules (up to 42 analog inputs total), seven general-purpose 16-bit timers, eleven SCCP/SCCP modules for PWM, and a USB Full-Speed transceiver. The 64-QFN package exposes ample GPIO while keeping the PCB footprint to 9x9 mm. The PIC32MK architecture targets digital signal control (DSC) workloads: it bridges conventional MCU determinism with DSP throughput. The combination of single-cycle MAC, dedicated accumulators, and a high-resolution PWM makes the part well-suited for field-oriented control (FOC) of brushless DC motors, power conversion control loops, and multi-channel sensor fusion where the on-chip FPU accelerates transform calculations. Typical applications include industrial motor drives, BLDC/PMSM servo controllers, solar inverters, industrial PLC modules, IIoT edge nodes with USB-FP connectivity, and general-purpose 32-bit embedded control. In each of these scenarios the FPU, ECC Flash, and CAN-FD peripheral provide clear differentiation against simpler Cortex-M0/M3 MCUs. When designing with this part, carefully evaluate the 64-QFN thermal dissipation path under full peripheral load; ensure the exposed pad is soldered to a sufficiently large copper pour to keep junction temperature within the -40C to +125C operating range. Decoupling bulk and ceramic capacitors as close to each VDD/VSS pair as the package allows is critical for ADC accuracy. This page synthesizes distributor pricing, verified same-brand drop-in alternatives, application-specific companion parts, and practical design notes not found in the manufacturer datasheet.

Cotización Contacto

PIC32MK0512GPK064T-I/MR

PIC32MK0512GPK064T-I/MR - 32-bit 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPK064T-I/MR is a 32-bit MIPS32 microAptiv PIC microcontroller IC operating at up to 120 MHz, with 512 KB of ECC-protected Flash and a hardware Floating Point Unit (FPU), housed in a 64-pin QFN 9x9 mm package. The variant decoded in the part number suffix is the General Purpose (GP) family member with USB Full-Speed and without CAN-FD. A PIC32 microcontroller is a 32-bit MCU architecture based on the MIPS32 instruction set (microAptiv core) that bridges the gap between 8/16-bit PIC microcontrollers and high-performance ARM Cortex-M parts. It belongs to the broader hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MK family. The PIC32MK family in particular targets motor control, industrial control, and Industrial IoT (IIoT) applications where DSP performance, FPU math, and rich analog peripherals matter. Key features include 120 MHz CPU clock with single-cycle MAC and four 64-bit accumulators, MicroMIPS mode for 40% smaller code size, hardware FPU for single- and double-precision IEEE-754 math, 512 KB dual-panel Flash with ECC, 128 KB SRAM with ECC, a 12-bit ADC up to several Msps with up to ~49 analog inputs available, USB Full-Speed, multiple UART/SPI/I2C, and motor-control PWMs. The 64-QFN package includes an exposed pad for thermal dissipation. Architecturally, the PIC32MK combines a deterministic MIPS32 pipeline, dedicated DSP extensions, and a rich analog front end. The dual-panel Flash allows live updates without stopping code execution, useful in industrial field upgrades. ECC on Flash and SRAM improves reliability in noisy motor and power-conversion environments. Typical applications include BLDC/PMSM motor control (field-oriented control), industrial PLCs, multi-channel data acquisition, USB-connected industrial sensor nodes, and IIoT edge gateways. The wide operating voltage (2.3V to 3.6V) and industrial temperature range (-40C to +85C) make the part suitable for harsh environments. When designing with this device, ensure the PCB includes a thermal pad soldered to a sufficiently large copper pour for heat extraction, plan for decoupling capacitors near each VDD pin pair, and reserve the USB DP/DM traces for 90-ohm differential impedance to pass USB FS compliance. This page synthesizes distributor pricing and stock for PIC32MK0512GPK064T-I/MR, identifies drop-in alternatives in the same 64-QFN footprint, and supplies design notes that complement the manufacturer datasheet.

Cotización Contacto

PIC32MK0512GPK064T-I/PT

PIC32MK0512GPK064T-I/PT - 120MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MK0512GPK064T-I/PT is a 32-bit MIPS microAptiv PIC32MK microcontroller running up to 120 MHz, integrating 512 KB of ECC-protected Flash and 128 KB of SRAM in a 64-pin TQFP (10x10 mm) industrial-grade package. It targets high-performance motor control, industrial control, and IIoT edge nodes that require DSP/FPU math plus rich analog and connectivity peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, timers, communication peripherals, and analog/digital I/O. 32-bit microcontrollers extend 8/16-bit parts with wider registers, deterministic interrupt latency, hardware floating-point and DSP engines, and larger address spaces; PIC32MK MCUs sit in the performance tier between low-power Cortex-M0+ parts and application processors, providing deterministic real-time control with on-chip op amps, high-speed ADCs and PWM modules. Key features include 512 KB Flash with ECC, 128 KB SRAM, 4 KB EEPROM emulation, a single-precision FPU, DSP instructions, a USB 2.0 Full-Speed device/host/OTG controller, multiple UART/SPI/I2C interfaces, up to seven 16-bit timers, and a 12-bit ADC with up to 3 MSPS sampling and dedicated op amps. The 64-pin TQFP (PT) package offers 49 user I/O lines and an operating voltage of 2.3V to 3.6V, suitable for 3.3V digital systems with industrial temperature grade (-40C to +85C). Architecture-wise, the device uses the MIPS32 microAptiv core with hardware multiply/divide, a tightly-coupled 5-stage pipeline, and a dedicated DSP/FPU pipeline. Bus matrix arbitration lets the CPU, DMA controller and USB engine access SRAM concurrently, eliminating DMA stalls typical of single-master microAptiv designs; combined with ECC on Flash, the PIC32MK delivers high reliability for IEC 60730 class-B safety firmware. Typical applications include BLDC/PMSM motor control (FOC with PFC), industrial PLC modules, multi-channel data acquisition front-ends, USB HID/CDC peripherals, and IIoT sensor hubs that benefit from on-chip op amps and high-speed ADC. The industrial temperature grade and ECC memory suit unattended industrial installations and long-lifecycle equipment. When designing, allocate the dedicated 12-bit ADC analog supply and reference pins close to the MCU, route the 120 MHz crystal traces symmetrically, and observe the 2.3V minimum Vdd. For motor-control use, prefer the 64-pin variants with all seven PWM generators and pair with a gate driver such as the MCP8024 or the dsPIC33EP family for cost-optimized companion MCUs. This page synthesizes distributor pricing, drop-in alternatives within the same 64-pin TQFP footprint, and practical design notes not consolidated in the manufacturer datasheet alone.

Cotización Contacto

PIC32MK0512GPK100-E/PT

PIC32MK0512GPK100-E/PT - 120MHz MCU 512KB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MK0512GPK100-E/PT is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz with 512 KB of Flash memory, packaged in a 100-pin TQFP (12x12 mm). It combines a single-precision/double-precision Floating Point Unit (FPU), MicroMIPS mode for ~40% smaller code, four 64-bit accumulators and single-cycle MAC supporting saturating and fractional math. A 32-bit microcontroller (MCU) is a microprocessor core integrated with Flash program memory, SRAM, peripherals and a multi-channel interrupt controller on a single chip. PIC32MK devices sit at the high-performance end of Microchip's PIC32 family and bridge toward DSP-class workloads, occupying a position in the hierarchy: PIC32MK -> PIC32 family -> 32-bit MCU -> microcontroller -> embedded semiconductor. Key differentiating features include 512 KB Dual-Panel Flash with ECC protection, four 64-bit accumulators for DSP workloads, seven 12-bit ADCs at up to 3.75 MSPS each, a general-purpose variant with USB but no CAN-FD, and 78 user I/O pins. The 100-pin TQFP supports a wide range of motor control, industrial and IIoT interfaces. Architecturally, the device pairs a 120 MHz MIPS32 microAptiv core with a hardware FPU, dedicated DSP accumulators and four 64-bit timers. Dual-panel Flash enables live firmware updates without device reset, while ECC-protected memory improves reliability for industrial long-life deployments. Typical applications include BLDC/PMSM motor control, industrial PLC modules, multi-channel data acquisition systems, IIoT edge nodes and USB-connected industrial sensors. The combination of seven fast ADCs and DSP extensions suits sensor-fusion and closed-loop control. When designing with this MCU, allocate decoupling capacitance per the family hardware guide and route the analog/digital grounds with a single point tie. For motor-control layouts, keep the PWM outputs symmetrical and isolate the analog reference from switching currents. This page synthesizes distributor pricing, drop-in alternatives and design notes not found in the standalone manufacturer datasheet, helping engineers select the right PIC32MK variant for motor control, IIoT and industrial designs.

Cotización Contacto

PIC32MK0512GPK100T-E/PT

PIC32MK0512GPK100T-E/PT - 120MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MK0512GPK100T-E/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core, running at 120MHz, with 512KB of ECC-protected Flash, 128KB SRAM, 4KB EEPROM, and 78 I/O pins in a 100-pin TQFP (12x12 mm) package. It integrates a single-precision/double-precision hardware Floating Point Unit, four 64-bit accumulators, and a single-cycle MAC that supports saturating and fractional math for DSP workloads. The 120MHz core, combined with the dual-panel Flash, makes it suitable for deterministic, hard-real-time control loops in motor and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals into one package. In the broader semiconductor hierarchy, MCUs sit within the embedded computing category, alongside microprocessors (MPUs) and DSPs. Within the embedded-computing taxonomy, this part belongs to the 32-bit MCU tier, which delivers higher computational throughput than 8-bit or 16-bit MCUs and adds DSP-class instructions for signal-processing tasks. Key features include a USB Full-Speed device/host/OTG controller, multiple 12-bit ADC modules with up to 3.5 Msps conversion rate, high-resolution PWM outputs targeting motor and digital-power control, and a rich communication peripheral set including CAN-FD, UART, SPI, I2C, and SQI. The 512KB ECC Flash provides bit-error correction for safety-critical firmware storage, and the dual-panel layout supports live update and simultaneous read-while-write. The part operates from 2.3V to 3.6V across an industrial -40C to +125C temperature range, qualified for the -E (extended) grade. Architecturally, the PIC32MK combines a RISC-style Harvard architecture (separate instruction and data paths) with MicroMIPS compressed instructions, reducing code size by approximately 40% versus the standard MIPS32 instruction set. This allows complex motor-control or digital-power algorithms to fit in the on-chip Flash, while the FPU accelerates transcendental math used in vector control or Kalman-filter estimation loops. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), field-oriented control (FOC) and power-conversion inverters, industrial PLCs, multi-channel data acquisition with synchronized sampling, IIoT edge controllers, and USB-connected human-machine interface (HMI) panels. The combination of DSP extensions, FPU, and high-resolution PWM specifically targets digital power and motor-control firmware libraries from Microchip. When designing with this device, ensure the high-resolution PWM timing requirements are met by following Microchip AN1078 (Sensorless Field Oriented Control) or AN1292 (Power Conversion) reference designs. Decoupling the AVDD/AVSS analog supply pins with 100nF + 10uF bulk capacitors per ADC is essential to achieve the rated 12-bit ENOB performance, and unused I/O should be configured as outputs low or inputs with internal pull-up to minimize I_leakage in safety-relevant hardware. This page synthesizes distributor pricing, drop-in alternatives in the same 100-TQFP footprint, datasheet download links, and practical motor-control design notes that go beyond the manufacturer datasheet excerpt.

Cotización Contacto

Subcategorías

Productos (32779)

PIC32MK0512GPE064T-E/PT - 512KB Flash 32-bit MCU, 80MHz | Microchip

PIC32MK0512GPE064T-I/MR - 120MHz 32-bit MCU | Microchip

PIC32MK0512GPE064T-I/PT - 120MHz MCU 512KB Flash 64-TQFP | Microchip

PIC32MK0512GPE100-I/PT - 120MHz MCU 512KB Flash | Microchip

PIC32MK0512GPE100T-E/PT - 120MHz FPU MCU 100-TQFP | Microchip

PIC32MK0512GPG048-E/7MX - 120MHz MCU 512K Flash 48-VQFN | Microchip

PIC32MK0512GPG048-E/Y8X - 32-bit MCU, 120MHz, 512KB Flash | Microchip

PIC32MK0512GPG048-I/7MX - 32-bit MCU, 120MHz, 512KB Flash, 48-VQFN | Microchip

PIC32MK0512GPG048-I/Y8X - 120MHz MCU 512KB Flash 48-TQFP | Microchip

PIC32MK0512GPG048T-I/7MX - 120MHz 32-bit MCU, 512KB Flash | Microchip

PIC32MK0512GPG048T-I/Y8X - 120MHz 32-bit MCU 512KB Flash | Microchip

PIC32MK0512GPG064-E/PT - 32-Bit MCU, 512KB Flash, 64-TQFP | Microchip

PIC32MK0512GPG064-E/R4X - 120MHz MCU 512KB Flash 64-VQFN | Microchip

PIC32MK0512GPG064-I/PT - 120MHz MCU, 512KB Flash, 64-TQFP | Microchip

PIC32MK0512GPG064T-I/PT - 120MHz 32-bit MCU 512KB Flash 64-TQFP | Microchip

PIC32MK0512GPG064T-I/R4X - 120 MHz 512KB Flash 32-bit MCU | Microchip

PIC32MK0512GPK064-E/PT - 120MHz 512KB MCU with USB FS | Microchip

PIC32MK0512GPK064-I/MR - 120MHz 512KB MCU, 64-QFN | Microchip

PIC32MK0512GPK064-I/PT - 120MHz 512KB MCU | Microchip Technology

PIC32MK0512GPK064T-E/MR - 120MHz, 512KB Flash MCU | Microchip

PIC32MK0512GPK064T-I/MR - 32-bit 120MHz MCU 512KB Flash | Microchip

PIC32MK0512GPK064T-I/PT - 120MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip

PIC32MK0512GPK100-E/PT - 120MHz MCU 512KB Flash TQFP-100 | Microchip

PIC32MK0512GPK100T-E/PT - 120MHz 512KB Flash MCU | Microchip