Circuitos integrados

STM8L151C6T6

STM8L151C6T6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics

The STM8L151C6T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family, featuring a 16 MHz STM8 core, 32 KB of Flash memory, 2 KB of RAM, and 1 KB of data EEPROM. Housed in a 48-pin LQFP (7x7 mm) package, this MCU is designed for energy-sensitive applications requiring long battery life and high integration. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a processor core, memory, and programmable peripherals. The STM8L151C6T6 belongs to the STM8L ultra-low-power family, which is optimized for applications where power consumption is critical, such as portable medical devices, smart sensors, and industrial monitoring. As a member of the STM8L series, it balances processing capability with energy efficiency, making it a key component in the power management hierarchy of embedded systems. Key features include an operating power supply range of 1.8V to 3.6V, multiple low-power modes (Wait, Low-power Run, Low-power Wait, Active-halt, and Halt), and a rich set of peripherals: USART, I2C, SPI, 12-bit ADC, 12-bit DAC, comparators, timers, and an RTC. The device also supports an LCD driver (on STM8L152 variants) and offers up to 41 I/O pins. Its ultra-low-power design achieves typical current consumption as low as 0.3 µA in Halt mode, making it ideal for battery-powered applications. The STM8L151C6T6 is built on ST's proprietary STM8 core architecture, which is designed for high code density and efficient execution. The device includes a flexible clock system with internal and external oscillators, a comprehensive set of timers (including a basic timer, general-purpose timers, and a low-power timer), and a 12-bit ADC with up to 28 channels. The integrated EEPROM allows for data storage without external memory, simplifying system design and reducing BOM cost. Typical applications include portable medical devices (e.g., glucose meters, pulse oximeters), smart sensors for IoT nodes, industrial process control, and battery management systems. The ultra-low-power modes and wide operating voltage range make it particularly suited for devices powered by coin cells or energy harvesting. The rich analog peripherals (ADC, DAC, comparators) enable direct sensor interfacing without external components. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main power input. For lowest power consumption, use the Halt mode with the RTC running, and configure unused I/Os as analog inputs or outputs to avoid floating inputs. The STM8L151C6T6 is supported by ST's free development tools, including the ST Visual Develop (STVD) IDE and the STM8CubeMX configuration tool, which simplify firmware development and peripheral initialization.

Cotización Contacto

STM8L151F3P3

STM8L151F3P3 - 16MHz 8KB Flash MCU | STMicroelectronics

The STMicroelectronics STM8L151F3P3 is an 8-bit ultra-low-power STM8L EnergyLite microcontroller with a 16 MHz enhanced STM8 CPU core, 8 KB Flash memory, and a 20-pin TSSOP package. Its headline specifications are 16 MHz operation, 8 KB Flash memory, and a 1.8 V to 3.6 V supply range, making it suitable for compact, battery-operated embedded systems. What is an ultra-low-power microcontroller? An MCU integrates a processor, programmable memory, peripherals, and I/O on one semiconductor device. The STM8L family is designed for energy-efficient embedded control, where the system may spend substantial time in low-power states between sensor readings, user actions, or communications. In the hierarchy of electronic components, an MCU is a semiconductor, a microcontroller, and an embedded processing device used for control and automation. The verified device information identifies an enhanced STM8 CPU core capable of up to 16 MIPS at 16 MHz, 8 KB Flash organized as 8K x 8, and 1 KB of RAM as indicated by the comparison data. The 20-pin TSSOP package supports surface-mount assembly and is specified for an operating supply of 1.8 V to 3.6 V. The MCU is positioned for low-power embedded control rather than high-performance computing, providing a balanced combination of processing speed, memory, and compact packaging. The STM8L151F3P3 can be used in sensor nodes, battery-powered instruments, simple industrial controls, consumer accessories, and low-power monitoring systems. Its 8-bit architecture is appropriate for sequential control, parameter reading, state management, and communication tasks where application complexity does not require a larger processor. Its TSSOP-20 package is also useful when a design needs a modest pin count and a conventional leaded surface-mount footprint. When designing a board around the STM8L151F3P3, verify the exact pin assignments and peripheral multiplexing in the manufacturer datasheet before finalizing the PCB. Provide stable decoupling near the power pins, confirm the clock and reset requirements, and account for the 1.8 V to 3.6 V supply range. Firmware should also be tested across the intended temperature, voltage, and low-power operating conditions. This product page combines the verified manufacturer and distributor information with practical sourcing, comparison, and design guidance. Pricing and availability should be checked with authorized distributors, while the manufacturer datasheet remains the controlling reference for electrical limits, pinout, memory behavior, and peripheral operation.

Cotización Contacto

STM8L151F3P6

STM8L151F3P6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151F3P6 is an 8-bit ultra-low-power microcontroller with up to 16 MIPS at 16 MHz, 8 KB of Flash memory, and a 20-pin TSSOP package. It is designed for compact, power-constrained embedded systems requiring low-power operation, RTC functions, timers, and integrated data EEPROM. The STM8L151x2/3 family uses an enhanced STM8 CPU core with a CISC architecture and optimized low-power modes. An ultra-low-power microcontroller is a semiconductor device designed to minimize energy consumption during standby, sleep, and active operation. The STM8L151x2/3 family combines an 8-bit CPU core, Flash program memory, EEPROM, timers, GPIO, communication peripherals, and low-power management in one compact package. This device family is suitable when a controller must balance fast control-loop execution with restricted energy budgets. The STM8L151F3P6 provides 8 KB of Flash, up to 256 bytes of EEPROM according to the device description, and operation up to 16 MHz. It is identified as an STM8L EnergyLite microcontroller in distributor listings and is available in a 20-pin TSSOP package. The part is intended for low-voltage embedded designs where the MCU must handle control, sensing, communication, and periodic sensing without a high-power processor. The enhanced STM8 core provides increased processing power while retaining CISC advantages such as compact instruction representation and efficient code density. A 24-bit linear addressing space supports organized access to memory-mapped peripherals. The low-power architecture helps designers select suitable operating modes during idle periods and wake the controller for defined events or scheduled tasks. Typical applications include low-power sensor nodes, industrial monitoring modules, battery-powered instruments, building automation controls, portable measurement equipment, and embedded consumer devices. The 20-pin TSSOP package is useful for PCB layouts where a relatively small through-hole-style surface-mount footprint is preferred and when the design does not require a large high-pin-count microcontroller. When designing around STM8L151F3P6, verify the exact peripheral configuration, clock setup, pin multiplexing, memory limits, and low-power behavior in the manufacturer datasheet. The P6 suffix and package markings should be confirmed against the ordered device, and firmware should be tested for all required sleep, wake-up, RTC, and communication paths before production release. This page combines the verified manufacturer product information, distributor specifications, package details, and application-oriented design guidance. It also distinguishes electrically similar devices from true pin-for-pin drop-in alternatives, helping engineers make a defensible sourcing or redesign decision rather than treating unrelated low-power MCUs as direct substitutes.

Cotización Contacto

STM8L151G3U6

STM8L151G3U6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151G3U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz STM8 CPU, 8 KB Flash memory, 1 KB RAM, and a 28-pin UFQFPN 4x4 mm package. Its operating supply range is 1.8 V to 3.6 V, and the enhanced STM8 core provides up to 16 MIPS at 16 MHz for energy-efficient embedded control. The device is identified as an STM8L EnergyLite MCU and is suitable for compact, battery-operated systems. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while monitoring sensors, controlling actuators, and managing communication or timing functions. The STM8L family belongs to the 8-bit microcontroller hierarchy, where an embedded MCU integrates processor core, memory, GPIO, timers, and communication peripherals on one package. This integration reduces component count and supports portable, low-power industrial, sensor, consumer, and medical-control designs. Key verified features include 8 KB of Flash organized as 8K x 8, 16 MHz maximum clocking, 8-bit processing, a 1.8 V to 3.6 V supply range, and 28-pin UFQFPN packaging. The manufacturer describes the STM8L151x2/3 devices as offering increased processing power while maintaining an ultra-low-power architecture. The small 4x4 mm package supports space-constrained designs, while the exposed-pad construction requires careful PCB thermal and layout implementation. The STM8L151G3U6 is primarily controlled by its enhanced 8-bit STM8 core. Its memory arrangement provides a practical balance between firmware storage and working RAM for compact control tasks. The 16 MHz operating frequency supports responsive firmware execution, while the low-voltage operating range allows operation from common low-energy supply rails when the system power architecture supports them. Typical applications include battery-powered sensor nodes, compact industrial controllers, low-power IoT equipment, building automation modules, portable measurement products, and small consumer-device controllers. The device is particularly appropriate when board area, standby energy use, and a simple 8-bit control platform matter more than high arithmetic throughput. Designers should place decoupling capacitors close to the supply pins, follow the manufacturer’s exposed-pad land-pattern requirements, and verify signal-level compatibility with connected peripherals. Do not infer pin functions from the package count alone; use the official STM8L151G3 documentation for the complete pinout and exposed-pad connection. This page combines verified distributor and manufacturer information, same-family drop-in alternatives, comparison data, and practical design guidance for engineers evaluating STM8L151G3U6 sourcing and board compatibility.

Cotización Contacto

STM8L151G4U6

STM8L151G4U6 - 16MHz 16KB Ultra-Low-Power MCU | ST

The STMicroelectronics STM8L151G4U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz core, 16 KB of Flash memory, 2 KB of RAM, and a 28-pin UFQFPN package measuring 4 x 4 mm. Its 1.8 V to 3.6 V operating supply range and low-power-oriented STM8L architecture suit compact embedded products that need efficient control, sensing, communication, and low standby consumption. A microcontroller is an integrated circuit that executes embedded control software and connects external peripherals through digital and analog I/O. In the device hierarchy, the STM8L151G4U6 is an 8-bit MCU, part of the STM8L ultra-low-power family, and part of the broader embedded processor category. Its integrated flash memory stores firmware, while RAM supports execution state and application data. The supplied product data identifies 16 KB of Flash, 2 KB of RAM, a 16 MHz maximum clock, 28 pins, and operation from 1.8 V to 3.6 V. Search results also associate the STM8L151x4/6 family with RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparators. Exact peripheral availability, GPIO mapping, electrical limits, and low-power current figures must be checked against the manufacturer documentation for the exact ordering code. At 16 MHz, the device provides substantially more processing headroom than lower-clock 8-bit designs while retaining the simplicity of the STM8 architecture. The compact 4 x 4 mm UFQFPN package supports space-constrained assemblies, but its fine pitch requires careful PCB layout, solder inspection, and adequate thermal management during reflow and production. Typical uses include low-power sensor nodes, compact industrial controllers, battery-powered instruments, meter and keypad interfaces, communication modules, and small consumer appliances. Engineers should select peripheral functions by device variant rather than assuming every member of the STM8L151 family has identical resources. Firmware migration also depends on the exact pinout, clock tree, memory map, startup file, and development-tool configuration. For PCB implementation, verify the exposed-pad connection, decoupling requirements, SWIM programming access, and all alternate-function assignments in the official package drawing. Validate low-power modes against the actual peripheral set because stopping timers, ADC conversion, serial interfaces, or LCD-related circuitry can change achievable standby current. This page consolidates verified distributor specifications, family-level capabilities, sourcing references, and strict drop-in replacement findings. It separates confirmed STM8L151G4U6 values from family-level information so engineers can make a defensible sourcing and design decision without assuming unverified electrical or lifecycle details.

Cotización Contacto

STM8L151G6U6

STM8L151G6U6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics

The STM8L151G6U6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family. It operates at a clock speed of 16 MHz and features 32 KB of Flash memory, 2 KB of SRAM, and 1 KB of data EEPROM. The device is housed in a compact 28-pin UFQFPN (4x4 mm) package, making it ideal for space-constrained applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), which processes data in 8-bit chunks. It integrates a processor core, memory (Flash, SRAM, EEPROM), and programmable peripherals (timers, communication interfaces, ADC, DAC) on a single integrated circuit. In the system hierarchy, an 8-bit MCU is a type of embedded controller, which falls under the broader category of microcontrollers, which are themselves a subset of integrated circuits used in embedded systems. The STM8L151G6U6 is specifically optimized for ultra-low-power operation, targeting battery-powered and energy-harvesting applications. Key features of the STM8L151G6U6 include a 16 MHz CPU clock, 32 KB Flash memory, 2 KB SRAM, and 1 KB data EEPROM. It also integrates a 12-bit ADC, a 12-bit DAC, two comparators, an RTC, LCD driver, and multiple communication interfaces (USART, I2C, SPI). The device supports a wide supply voltage range of 1.8V to 3.6V, and its ultra-low-power modes include a Halt mode with 0.35 µA current consumption, making it suitable for battery-powered devices. The STM8L151G6U6 is built on ST's low-power 8-bit core, which is designed for energy efficiency. It features a modular peripheral set that is shared across STM8 and STM32 families, simplifying code migration. The device includes a 4-channel DMA controller, which offloads data transfer tasks from the CPU, improving overall system performance. The ultra-low-power design extends battery life in portable applications. Typical applications include portable medical devices, sensor nodes, smart meters, and industrial control systems. The device's low power consumption and rich peripheral set make it ideal for applications requiring long battery life and reliable operation. For example, in a wireless sensor node, the STM8L151G6U6 can wake up periodically, read sensors, and transmit data via its USART or SPI interface, then return to Halt mode to conserve power. When designing with the STM8L151G6U6, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to the VDD and VSS pins. The device's low-power modes require careful configuration of the clock system and peripheral clocks to achieve the specified current consumption. Additionally, the UFQFPN-28 package has an exposed pad that should be connected to ground for optimal thermal performance.

Cotización Contacto

STM8L151K6U3

STM8L151K6U3 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L151K6U3 is an ultra-low-power 8-bit microcontroller with a 16 MHz core, 32 KB Flash memory, and a 32-pin 5 mm × 5 mm UFQFPN package. The verified distributor listing identifies the device as an STM8L EnergyLite MCU with 32 KB Flash, while the manufacturer positions the STM8L151K6 family as part of the STM8L ultra-low-power 8-bit portfolio. It combines an 8-bit CPU with embedded analog and serial peripherals for compact control, sensing, communications, and low-duty-cycle embedded products. An ultra-low-power microcontroller is an embedded semiconductor designed to complete control tasks while minimizing energy consumption between active processing intervals. In the system hierarchy, the STM8L151K6U3 belongs to the microcontroller class, within embedded processors and power-conscious embedded control. Its combination of Flash program memory, data EEPROM, real-time-clock capability, LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators allows one device to consolidate several discrete functions on a small PCB. Verified feature information identifies up to 32 KB Flash, 1 KB data EEPROM, RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparators. The distributor record also confirms 8-bit operation, a 16 MHz maximum frequency, and 32 KB organized as 32K × 8. These resources suit firmware that includes user-interface updates, sensor acquisition, local data logging, communication, timekeeping, and low-power state management without requiring a separate real-time clock or interface-conversion circuitry. The STM8L151K6U3 belongs to STMicroelectronics' STM8L low-power architecture rather than the ARM-based STM32 families. That distinction matters when replacing it: software, instruction set, peripheral implementation, and toolchain assumptions may differ even when another microcontroller offers similar nominal features. ST's product page identifies the medium-density STM8L151x4/6 devices, allowing engineers to distinguish the target from lower-density STM8L151x2/3 parts when planning a redesign. Typical applications include battery-powered utility meters, compact environmental sensors, industrial control modules, wearable accessories, instrument panels, and connected sensor nodes. The target's integrated ADC and comparators suit local analog monitoring, while USART, I2C, and SPI support external sensors, transceivers, displays, and data loggers. The RTC is useful for time-stamped measurements and scheduled low-power operation, although exact current, voltage, timer, ADC, and package-registration details must be taken from the manufacturer documentation. PCB implementation should follow the exact 32-pin UFQFPN land pattern and exposed-pad requirements in the manufacturer package information. Place decoupling capacitors close to supply pins, route sensitive analog inputs away from fast-switching nodes, and confirm thermal-pad soldering against the assembly process. Firmware and peripheral configuration should also use STMicroelectronics' STM8 toolchain rather than assuming STM32 compatibility. This product record combines verified manufacturer positioning, distributor specifications, sourcing links, interface coverage, and replacement-risk guidance. It is intended to accelerate engineering evaluation while clearly separating confirmed facts from parameters that still require confirmation from the official datasheet.

Cotización Contacto

STM8L152C6T6

STM8L152C6T6 - 8-bit Ultra-Low-Power MCU 32KB Flash | STMicroelectronics

The STM8L152C6T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family, featuring a 16 MHz STM8 core, 32 KB of Flash memory, 2 KB of RAM, and 1 KB of data EEPROM. It is housed in a 48-pin LQFP (7x7 mm) package and operates over a supply voltage range of 1.8V to 3.6V, with a temperature range of -40°C to 125°C. This device integrates a rich set of peripherals including an LCD driver, real-time clock (RTC), timers, USART, I2C, SPI, 12-bit ADC, 12-bit DAC, and comparators, making it ideal for battery-powered and energy-sensitive applications. An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, executing instructions on 8-bit words. It typically integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals (timers, communication interfaces, ADC) on a single die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but excels in ultra-low-power operation and cost-effectiveness for simple control tasks. The STM8L152C6T6 belongs to the STM8L ultra-low-power family, which is designed for applications where energy efficiency is paramount, such as portable medical devices, smart meters, and wireless sensor nodes. Key features of the STM8L152C6T6 include its ultra-low-power modes (Halt, Active-Halt, Wait) with current consumption as low as 0.35 µA in Halt mode, a 16 MHz CPU clock, and a 12-bit ADC with up to 28 channels. The integrated LCD driver supports up to 4x28 segments, enabling direct connection to segment LCDs without external drivers. The device also includes a true data EEPROM with up to 1 KB, allowing non-volatile data storage without external memory. The RTC provides accurate timekeeping with a separate clock domain, and the multiple communication interfaces (USART, I2C, SPI) facilitate connectivity with sensors and other peripherals. From a technical architecture perspective, the STM8L152C6T6 is built on a Harvard architecture with a 3-stage pipeline, achieving up to 16 MIPS at 16 MHz. The core includes an 8-bit accumulator, 16-bit index registers, and a 16-bit stack pointer, with a rich instruction set optimized for C and assembly programming. The device features a flexible clock system with multiple internal and external oscillator options, including a low-speed internal RC oscillator for low-power operation. The power management unit provides multiple low-power modes and a programmable voltage detector, enabling fine-grained control over energy consumption. Typical applications for the STM8L152C6T6 include smart meters (electricity, water, gas), portable medical devices (glucose meters, pulse oximeters), remote controls, and battery-powered sensor nodes. Its ultra-low-power consumption and integrated LCD driver make it particularly well-suited for devices that require long battery life and direct LCD display. The device is also used in industrial control and home automation systems where reliability and low power are critical. When designing with the STM8L152C6T6, engineers should pay attention to the power supply decoupling, placing a 100 nF capacitor close to each VDD pin and a 1 µF capacitor on the main supply. The VDDA pin should be connected to VDD through a ferrite bead to reduce noise for the ADC. Additionally, the LCD driver requires a charge pump capacitor (typically 100 nF) between the VLCD pin and ground, and the RTC requires a 32.768 kHz crystal for accurate timekeeping. Proper layout of the crystal and decoupling capacitors is essential for reliable operation.

Cotización Contacto

STM8L152C6U6

STM8L152C6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C6U6 is an ultra-low-power 8-bit microcontroller operating at up to 16 MHz, with 32 KB of Flash memory and a 48-pin UFQFPN package measuring 7 mm by 7 mm. It belongs to the STM8L EnergyLite family and integrates an RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and comparators for compact embedded-control designs. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, peripherals, and input/output interfaces on one device. The STM8L152C6U6 occupies the MCU → embedded controller → low-power microcontroller hierarchy and is designed to manage sensors, communications, displays, and control functions while minimizing energy consumption in battery-operated equipment. Verified product information identifies a 32 KB Flash configuration, 1 KB data EEPROM, 16 MHz maximum clock, and a 48-pin UFQFPN package. The integrated RTC and LCD support are especially useful for panel-based products, while USART, I2C, and SPI provide options for external sensors, transceivers, memory, and host connectivity. The ADC, DAC, and comparators broaden the device's usefulness for signal conditioning and threshold-based control. The STM8L152C6U6 is positioned for low-power embedded systems where an 8-bit architecture, compact package, and broad peripheral set are more appropriate than a high-performance application processor. Its feature set can reduce external component count by combining control, communication, analog conversion, timing, and display functions in one device. The manufacturer's product page identifies the device as a member of the STM8L ultra-low-power 8-bit family. Typical applications include battery-powered sensor nodes, industrial sensing modules, compact HMI controllers, meter and instrument electronics, communication equipment, and low-power embedded products. The 7 mm by 7 mm package supports dense PCB layouts, but pin assignment, exposed-pad requirements, power routing, and peripheral multiplexing must be checked against the manufacturer datasheet before layout release. For a new design, use the official STMicroelectronics documentation to confirm supply-voltage limits, pin multiplexing, decoupling requirements, clock configuration, and programming options. Because the supplied web data does not include a verified unit-price table or complete pin mapping, those details should be obtained from current manufacturer and distributor resources before purchasing or committing the PCB. This page combines verified distributor availability information, manufacturer-family positioning, package and memory details, interface capabilities, application guidance, and engineering-oriented sourcing notes. It is intended to support component selection and design planning without replacing the manufacturer datasheet for final electrical validation.

Cotización Contacto

STM8L152R8T6

STM8L152R8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics

The STM8L152R8T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics, part of the STM8L EnergyLite family. It features an enhanced STM8 CPU core running at up to 16 MHz, 64 KB of Flash memory, 4 KB of RAM, and 2 KB of data EEPROM. The device is housed in a 64-pin LQFP (10x10 mm) package and operates over a supply voltage range of 1.8V to 3.6V, with a temperature range of -40°C to 125°C. It integrates a rich set of peripherals including an LCD driver, real-time clock (RTC), timers, USART, I2C, SPI, ADC, DAC, and comparators, making it suitable for a wide range of low-power applications. An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, typically used in embedded systems where cost, power efficiency, and simplicity are prioritized over raw processing power. The STM8L152R8T6 belongs to the STM8L series, which is specifically designed for ultra-low-power operation, featuring multiple low-power modes (Wait, Low-power Run, Low-power Wait, Active-halt, and Halt) to minimize energy consumption. In the broader hierarchy, it sits as a microcontroller -> 8-bit MCU -> ultra-low-power MCU -> STM8L EnergyLite family, and is a key component in battery-powered and energy-harvesting applications. Key features include an ultra-low-power STM8 core with up to 16 MHz operation, 64 KB Flash with read-while-write capability, 4 KB RAM, 2 KB true data EEPROM with error correction code (ECC), and a 12-bit ADC with up to 28 channels. The device also integrates a 12-bit DAC, two comparators, an LCD driver supporting up to 8x40 segments, and a real-time clock with calendar and alarm functions. Its low-power design achieves typical current consumption of 3.4 µA in Halt mode with RTC on, and 0.35 µA in Halt mode without RTC, making it ideal for battery-powered devices. From a technical depth perspective, the STM8L152R8T6 uses a Harvard architecture with a 3-stage pipeline, allowing most instructions to execute in a single clock cycle. The Flash memory supports read-while-write, enabling firmware updates without halting the CPU. The device includes a flexible clock system with internal and external oscillators, a phase-locked loop (PLL) for frequency multiplication, and a clock security system for fail-safe operation. The ultra-low-power design is achieved through advanced process technology and multiple power domains, allowing independent power management of the core, peripherals, and I/O. Typical applications include portable medical devices (e.g., glucose meters, pulse oximeters), smart meters, wireless sensor nodes, and industrial control systems. The STM8L152R8T6's low power consumption and rich analog peripherals make it particularly well-suited for battery-powered applications where long battery life is critical. Its LCD driver and RTC also make it ideal for consumer electronics like digital thermometers and smart watches. When designing with this device, pay careful attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main power input. Additionally, configure the unused I/O pins to analog mode or low-power mode to minimize leakage current, and use the low-power modes effectively to extend battery life.

Cotización Contacto

STM8L162M8T6

STM8L162M8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics

The STM8L162M8T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family. It features a 16 MHz STM8 core, 64 KB of Flash memory, 4 KB of RAM, and 68 I/O pins in an 80-pin LQFP package (14x14 mm). Operating from 1.8V to 3.6V, it is designed for energy-efficient applications requiring long battery life. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, executing instructions sequentially. It integrates a processor core, memory (Flash, RAM), and peripherals (timers, UART, SPI, I2C, ADC) on one IC. In the hierarchy of embedded systems, an MCU is a type of integrated circuit, specifically a microcontroller, which falls under the broader category of semiconductors. The STM8L EnergyLite series is optimized for ultra-low-power operation, making it a key component in battery-powered and energy-harvesting designs. Key features include multiple low-power modes (Wait, Low-power Run, Low-power Wait, Active-halt, Halt) with current consumption as low as 0.3 µA in Halt mode, a 12-bit ADC, two comparators, a real-time clock (RTC), and a wide range of communication interfaces (USART, SPI, I2C). The device also includes an LCD driver (up to 8x40 segments), a 12-bit DAC, and a DMA controller, enhancing its versatility for sensor and display applications. The STM8L162M8T6 is built on a low-leakage CMOS process, achieving industry-leading energy efficiency. Its architecture supports fast wake-up times (as low as 4 µs) and dynamic voltage scaling, allowing designers to balance performance and power consumption. The integrated bootloader and in-application programming (IAP) capabilities simplify firmware updates in the field. Typical applications include portable medical devices (glucose meters, pulse oximeters), smart meters, wireless sensor nodes, and industrial process control. Its ultra-low-power modes and rich analog peripherals make it ideal for battery-powered systems where every microamp matters. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main supply. Use the low-power modes strategically to extend battery life, and ensure the crystal oscillator layout is clean to maintain accurate timing.

Cotización Contacto

STM8S001J3M3

STM8S001J3M3 - 16MHz 8-bit MCU, 8KB Flash, SOIC-8 | STMicroelectronics

The STMicroelectronics STM8S001J3M3 is a 16 MHz 8-bit STM8S microcontroller with 8 KB of Flash program memory, 128 bytes of true data EEPROM, and a 10-bit ADC, packaged in an 8-pin SOIC (SO-8/SO8N) outline. It is the lowest-pin-count member of the mainstream STM8S value line, offering the full STM8S peripheral set in a footprint as small as the ATtiny13/ATtiny85. According to the ST datasheet (DocID026881), the device integrates a Harvard-architecture 3-stage pipeline core, three timers, plus UART, SPI, and I2C communication interfaces, all in a tiny 8-pin package. A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), small non-volatile data storage (EEPROM), and a configurable set of digital and analog peripherals on a single silicon die. The STM8S family sits in the 8-bit MCU category, which traces up the hierarchy to microcontroller -> embedded processor -> semiconductor IC. The STM8S core uses an extended instruction set that is binary-compatible across the STM8S/STM8L families, making code portable to higher-pin-count siblings when the design grows. Key features include 8 KB Flash with in-application/in-circuit programming, 128 bytes of true byte-erasable EEPROM rated for 100 k cycles, 1 KB SRAM, 5 ADC channels with 10-bit resolution and up to 12-bit oversampling, a 16 MHz internal RC oscillator calibrated to ±1%, and a 1.8 V to 5.5 V supply range. The 8-pin SOIC exposes just enough I/O to drive a handful of switches, LEDs, sensors, or a serial link, and the integrated brown-out reset and watchdog timer simplify safety-critical designs. Two 16-bit timers and one 8-bit timer provide PWM, input capture, and output compare functions for motor, LED, and timing control. Architecturally, the STM8S001J3 is a derivative of the STM8S003F3 with the same silicon die repackaged into an 8-pin SOIC, dropping most GPIOs in favor of a tiny PCB footprint. The integrated voltage regulator lets the chip run from a single 1.8-5.5 V rail without external components. With an active-mode current in the single-digit mA range and multiple low-power modes down to a few microamps, it is well suited to battery-powered gadgets and always-on sensor nodes. Typical applications include low-cost sensor interface boards, replacement of ATtiny13/ATtiny85 designs, smart LED controllers, IR remote transmitters/receivers, simple motor and fan controllers, battery chargers, and hobby/educational platforms such as the STM8 eForth project. The wide operating temperature range (-40C to +125C) and 5 V tolerance on most pins also make it viable for industrial control front-ends. When designing with this device, note that only 6 of the 8 pins are usable as GPIO because NRST and power pins are mandatory. Use the SWIM debug interface for in-circuit programming and debugging, and place a 100 nF decoupling capacitor as close as possible to the VDD pin. Compare pinout carefully against ATtiny85 migration paths before re-using existing PCB layouts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, helping engineers quickly evaluate the STM8S001J3M3 for low-pin-count 8-bit designs.

Cotización Contacto

STM8S003F3P6

STM8S003F3P6 - 8-bit MCU 8KB Flash 16MHz TSSOP-20 | STMicroelectronics

The STMicroelectronics STM8S003F3P6 is a value line 8-bit microcontroller based on the STM8 core, running at up to 16 MHz with 8 KB of Flash memory, 1 KB of RAM, and 128 bytes of true data EEPROM in a 20-pin TSSOP package. An 8-bit microcontroller (MCU) is a single-chip computer integrating an 8-bit CPU, program memory, data memory, and programmable peripherals. The STM8S003F3P6 belongs to the STM8S series within the STM8 family, positioned below the 32-bit STM32 series in STMicroelectronics' product hierarchy and targeting cost-sensitive embedded control. Key features include 8 KB Flash with integrated true EEPROM (up to 100,000 write/erase cycles), a 10-bit ADC with 5 channels, and UART, SPI, and I2C interfaces. The device operates from 2.95V to 5.5V, supporting both 3.3V and 5V systems, with 16 programmable I/Os and 7 timers/counters including a 16-bit timer, an 8-bit timer, and watchdog timers. The STM8 core uses a Harvard-architecture 3-stage pipeline delivering 16 MIPS at 16 MHz. An internal 16 MHz RC oscillator eliminates the need for an external crystal in many designs. Low-power modes include Halt, Active-Halt, and Wait, with 3.6 mA typical in Run mode at 16 MHz and about 1 uA in Halt mode. Typical applications include home appliances, industrial control, consumer electronics, motor control helpers, and sensor interfaces. Its wide voltage range and robust I/O make it popular in white goods, power tools, and battery-powered devices, while the integrated EEPROM removes external non-volatile memory from the BOM. Design tip: decouple VDD with a 100 nF capacitor placed close to the pin. The internal RC is accurate to approximately 2%, so use an external crystal when precise timing is required. SWIM single-wire in-circuit programming simplifies firmware updates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the ST datasheet, as of 2026-08-29.

Cotización Contacto

STM8S003F3P6TR

STM8S003F3P6TR - 8-bit MCU, 8KB Flash, 16MHz | STMicroelectronics

The STMicroelectronics STM8S003F3P6TR is an 8-bit microcontroller based on the STM8 core, offering 8KB of Flash memory, 1KB of RAM, and 640 bytes of EEPROM in a 20-pin TSSOP package. It operates at a maximum frequency of 16 MHz and supports a supply voltage range of 2.95V to 5.5V, making it suitable for a wide range of cost-sensitive embedded applications. Data verified as of 2026-08-05. An 8-bit microcontroller (MCU) is a compact integrated circuit that contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM8 core is an 8-bit CISC architecture designed for high code density and efficient performance in low-cost applications. As a member of the STM8S series, this MCU sits within the broader hierarchy of microcontrollers, which are themselves a subset of embedded processors used in everything from consumer electronics to industrial control systems. Key features include 8KB of Flash program memory, 1KB of SRAM, and 640 bytes of true data EEPROM with write protection. The device integrates a 10-bit analog-to-digital converter (ADC) with up to 5 channels, a UART, SPI, and I2C interface, and a 16-bit timer with PWM capability. It also includes a watchdog timer, a clock security system, and a low-power mode to minimize energy consumption. The STM8S003F3P6TR is built on a robust 8-bit architecture with a 3-stage pipeline, enabling most instructions to execute in a single clock cycle. The device supports a wide operating temperature range from -40°C to +85°C, making it reliable for industrial environments. The TSSOP-20 package offers a compact footprint of 6.4mm x 4.4mm, ideal for space-constrained PCB designs. Typical applications include home appliances, small appliances, lighting control, power tools, and sensor interfaces. Its rich peripheral set and low cost make it a popular choice for high-volume consumer products where cost efficiency is paramount. When designing with this MCU, ensure proper decoupling of the VDD pin with a 100nF capacitor placed close to the device. The NRST pin should be connected to VDD through a 100nF capacitor and a pull-up resistor to prevent spurious resets. For programming, the SWIM interface requires a single-wire connection, simplifying in-circuit programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing engineers with a comprehensive resource for evaluating the STM8S003F3P6TR.

Cotización Contacto

STM8S003K3T6

STM8S003K3T6 - 8-bit 16MHz MCU, 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S003K3T6 is an 8-bit value-line STM8S microcontroller featuring a 16 MHz advanced STM8 core, 8 KB of Flash program memory and 128 bytes of true data EEPROM, housed in a 32-pin LQFP (7x7 mm) package. According to the manufacturer datasheet, the device integrates a 10-bit ADC, three general-purpose 16-bit timers, a UART, SPI and I2C communication interfaces, plus independent watchdog timers with separate clock source for safety-critical applications. The chip operates from 2.95 V to 5.5 V supply and is built on ST's state-of-the-art 130 nm embedded Flash process. A value-line microcontroller (often called an 8-bit MCU) is a small, low-cost processor optimised for embedded control tasks such as sensor reading, motor actuation, indicator driving, and user-interface handling. Within the broader semiconductor hierarchy, an MCU is a subset of microprocessors (MPU) and is differentiated by integrated Flash, RAM and peripherals on a single die. The STM8S003K3T6 occupies the entry-level value-line of the STM8S family, balancing die size, peripheral set and price for cost-sensitive designs where a 32-bit MCU is unnecessary. Key features that differentiate the STM8S003K3T6 in its class include 1 KB of RAM, the integrated 10-bit SAR ADC with up to 5 multiplexed channels, the clock security system (CSS) that detects external clock failure and switches to the internal RC oscillator, plus 100 k write/erase cycle endurance on the data EEPROM. Robust I/O design tolerates 5 V injection on adjacent pins, simplifying mixed-voltage interface to legacy 5 V peripherals. The 32-pin LQFP-32 (7x7) footprint provides easy hand-soldering and breadboard prototyping versus fine-pitch QFN options. Technically, the STM8S003K3T6 is engineered around the proprietary STM8 core with 16-bit index registers and a 20-bit program counter, executing most instructions in 1-2 clock cycles. The integrated voltage regulator and brown-out reset (BOR) circuitry protect the Flash against low-voltage write corruption. The 16 MHz system clock can be sourced from an external crystal, resonator, or the factory-trimmed internal 16 MHz RC oscillator with ±1 % accuracy across the full operating temperature range. Typical applications include low-cost consumer appliances (rice cookers, washing-machine user interfaces, induction cooktops), battery-powered sensor nodes, LED lighting controllers, simple BLDC/PMSM auxiliary motor drivers (fans, pumps), 5 V industrial control buttons, and Arduino-Nano-compatible hobbyist boards. The wide 2.95-5.5 V supply range and proven STM8 toolchain (STVD, IAR, Cosmic, SDCC) make it a frequent second source for legacy 8051 designs requiring a software refresh. When designing with the STM8S003K3T6, choose between the internal 16 MHz RC oscillator (saves BOM cost) and an external crystal (better UART baud-rate accuracy). Decouple VDD/VSS with 100 nF ceramic capacitors placed within 3 mm of each supply pin, and reserve the SWIM pin (single-wire debug) for in-circuit programming. For noisy environments, enable the CSS and the window watchdog for IEC 60730 class B compliance. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet, and is intended as a faster reference than the 31-page ST datasheet for engineers evaluating the part for production.

Cotización Contacto

STM8S005C6T6

STM8S005C6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics

The STM8S005C6T6 is an 8-bit microcontroller from STMicroelectronics' STM8S value line, featuring a 16 MHz STM8 core, 32 Kbytes of Flash program memory, and 128 bytes of data EEPROM. It is housed in a 48-pin LQFP (7x7 mm) package, offering a compact footprint for space-constrained embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a processor core, memory, and programmable peripherals. The STM8S005C6T6 belongs to the STM8S family, which is part of the broader STM8 8-bit MCU category, positioned below 32-bit ARM Cortex-M devices in the microcontroller hierarchy. It provides a cost-effective solution for applications requiring moderate processing power and rich peripheral integration without the complexity of 32-bit architectures. Key features include a 16 MHz CPU clock, 32 KB Flash, 2 KB RAM, 128 bytes EEPROM, and a comprehensive set of peripherals: 10-bit ADC, UART, SPI, I2C, timers, and up to 38 I/O pins. The device operates from a 2.95V to 5.5V supply, making it suitable for both 3.3V and 5V systems. Its robust ESD protection and wide operating temperature range (-40°C to +85°C) enhance reliability in industrial environments. The STM8S005C6T6 is built on ST's proprietary STM8 core, which delivers up to 20 MIPS at 16 MHz, providing efficient code execution for control-oriented tasks. The integrated EEPROM allows data storage without external components, simplifying BOM and reducing system cost. The device supports in-circuit programming and debugging via SWIM interface, enabling rapid firmware development. Typical applications include home appliances, industrial control, sensor interfaces, and consumer electronics. Its 5V-tolerant I/Os and rich peripheral set make it ideal for motor control, lighting, and power management systems. The wide voltage range and low power consumption support battery-powered devices. When designing with this MCU, ensure proper decoupling of the VDD pins with 100nF capacitors and a bulk capacitor. The SWIM pin should be pulled high for programming. For EMC-sensitive designs, follow ST's layout guidelines for the LQFP package to minimize noise coupling.

Cotización Contacto

STM8S007C8T6

STM8S007C8T6 - 8-Bit MCU, 64KB Flash, 24MHz | STMicroelectronics

The STM8S007C8T6 is an 8-bit microcontroller from STMicroelectronics' STM8S Value Line family, featuring a 24MHz advanced STM8 core with Harvard architecture and a 3-stage pipeline. It comes in a 48-pin LQFP package and offers 64KB of Flash memory, 6KB of RAM, and true data EEPROM. With 38 programmable I/O lines, 9 timers/counters, and interfaces including I2C, SPI, and 2 UARTs, this MCU is designed for cost-sensitive embedded applications requiring robust performance and low power consumption. An 8-bit microcontroller is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a type of embedded microcontroller, which is a compact integrated circuit designed to govern a specific operation in an embedded system. The STM8S007C8T6 belongs to the STM8 family, which is a line of 8-bit microcontrollers from STMicroelectronics, positioned between low-end 8-bit MCUs and higher-performance 32-bit ARM Cortex-M devices. Its Harvard architecture separates instruction and data buses, enabling simultaneous access and faster execution, while the 3-stage pipeline increases throughput at a given clock frequency. Key features of the STM8S007C8T6 include a maximum CPU frequency of 24MHz with 0 wait states at 16MHz, 64KB of Flash memory, 6KB of RAM, and true data EEPROM for non-volatile data storage. It integrates a 10-bit ADC, multiple timers, and communication interfaces (I2C, SPI, 2 UARTs), making it versatile for various control and monitoring tasks. The device operates over a temperature range of -40°C to 85°C and has a maximum power dissipation of 443mW, suitable for industrial and consumer environments. Technically, the STM8 core is an advanced 8-bit architecture with a 3-stage pipeline, allowing most instructions to execute in a single clock cycle. The 24MHz clock speed provides up to 24 MIPS throughput, which is competitive for 8-bit MCUs. The Flash memory supports in-application programming (IAP) and in-circuit programming (ICP), enabling firmware updates in the field. The true data EEPROM allows for byte-level read/write operations, useful for storing calibration data or system parameters without external memory. Typical applications include home appliances, industrial control, sensor interfacing, and automotive body electronics. The rich peripheral set and 38 I/O lines make it suitable for motor control, lighting systems, and human-machine interfaces. Its low power consumption and wide operating voltage range (typically 2.95V to 5.5V) support battery-powered devices and 5V logic systems. When designing with this MCU, consider the power supply decoupling and crystal oscillator layout. Use a 0.1uF capacitor close to each VDD pin and a 10uF bulk capacitor. For the external crystal, place it near the OSC pins with proper load capacitors as specified in the datasheet. Ensure the reset pin has a pull-up resistor and a capacitor for reliable power-on reset.

Cotización Contacto

STM8S103F2M6

STM8S103F2M6 - 8-Bit 16MHz 4KB MCU | STMicroelectronics

The STMicroelectronics STM8S103F2M6 is an 8-bit STM8S access-line microcontroller operating up to 16 MHz, with 4 KB of Flash memory and 1 KB of RAM in a 20-pin SOIC package. The verified distributor listing identifies a 2.95 V to 5.5 V supply range, 16 I/O ports, integrated data EEPROM, a 10-bit ADC, three timers, UART, SPI, and I2C. It is intended for compact embedded-control designs that need a capable peripheral set without the complexity of a 32-bit MCU. An 8-bit microcontroller is a compact embedded-processing device optimized for control logic, sensing, communication, and actuator management. Within the STM8S family hierarchy, this device combines an 8-bit core, Flash program memory, RAM, and on-chip peripherals in one package. The STM8S103F2M6 is suitable for low-cost, low-power industrial, consumer, appliance, instrumentation, and embedded control systems where deterministic I/O and peripheral integration are more important than high arithmetic throughput. The headline features are a 16 MHz maximum CPU frequency, 4 KB Flash, 1 KB RAM, 16 I/O ports, and integrated EEPROM. Its 10-bit ADC enables analog measurement from basic sensors, while the three timers support timing, PWM, and periodic control functions. UART, SPI, and I2C interfaces provide flexible connectivity to sensors, displays, transceivers, memories, and other microcontrollers. The 20-pin SOIC package is suitable for conventional surface-mount assembly and hand-soldered prototypes. The STMicroelectronics datasheet describes the STM8S103F2 family as an access-line MCU family with up to 8 KB Flash across family variants. For the specific STM8S103F2M6 ordering code, the verified distributor results specify 4 KB Flash and a 16 MHz CPU. This distinction matters because related family members may have different memory capacities, pin counts, or package options. Firmware and PCB decisions should therefore use the exact ordering code rather than relying only on the STM8S103F2 family name. Typical applications include small motor or relay controllers, temperature and light monitoring, keypad interfaces, LED indicators, low-cost measurement instruments, communication modules, and compact household or industrial automation nodes. The ADC and communication peripherals allow a single device to acquire sensor data and connect it to a host system. For designs requiring higher processing performance or larger memory, a 32-bit MCU may be preferable, while this device is optimized for economical embedded-control tasks. When designing, verify the exact pin assignments, alternate-function selection, clock configuration, ADC input availability, and peripheral instance mapping from the STMicroelectronics datasheet. Place decoupling capacitors close to the supply pins and keep high-current or switching nodes away from sensitive analog inputs. Program the device with a compatible STM8 toolchain and validate startup, reset, clock, and watchdog behavior on the final PCB. This page synthesizes the verified manufacturer and distributor information, package details, application guidance, and engineering considerations for engineers evaluating the STM8S103F2M6. It emphasizes exact-ordering-code verification rather than assuming every STM8S103F2 family variant has identical resources.

Cotización Contacto

STM8S103F2P3

STM8S103F2P3 - 16MHz 8-Bit MCU, 4KB Flash | STMicroelectronics

The STMicroelectronics STM8S103F2P3 is an 8-bit STM8S access-line microcontroller operating at up to 16 MHz, with 4 KB of Flash program memory and integrated data EEPROM, housed in a 20-pin TSSOP package. The verified distributor listings identify a 2.95 V to 5.5 V supply range, 16 I/O ports, a 10-bit ADC, three timers, UART, SPI, and I2C. Its small package and low-voltage operation make it suitable for compact embedded controls, sensor nodes, and simple industrial products. What is an 8-bit microcontroller? An 8-bit MCU is a programmable integrated circuit that executes instructions using an 8-bit data bus. In the embedded-control hierarchy, the STM8S103F2P3 belongs to the STM8S MCU family, which combines a CPU core, Flash program memory, data EEPROM, peripherals, and GPIO in one low-power device. It is intended for applications that need deterministic control and multiple serial interfaces without the resource demand of a higher-bit MCU. The STM8S103F2P3 is listed by STMicroelectronics as part of the STM8S103F2/x3 access line. The verified specifications show 4 KB of Flash for the STM8S103F2P3 ordering code, while the related STM8S103F2 family also includes variants with larger memory. The device provides a 16 MHz clock, a 10-bit ADC, three timers, UART, SPI, and I2C, making it a broad platform for embedded sensing, communications, and actuator-control designs. The 20-pin TSSOP package helps reduce PCB area compared with larger leaded packages. With 16 I/O ports, the device can connect digital inputs, outputs, and serial peripherals while leaving the remaining pins for power, clock, reset, and programming functions. The 2.95 V to 5.5 V operating range supports common embedded supply systems, although the final design should verify every electrical limit against the manufacturer datasheet. Typical applications include small sensor nodes, digital control boards, temperature or analog-signal monitoring, simple communication bridges, LED and relay-control systems, and compact access-line embedded products. The UART, SPI, and I2C peripherals allow the MCU to interface with sensors, transceivers, memories, displays, and actuators without requiring a separate interface controller. For a new design, verify the exact pinout, alternate-function assignments, clock configuration, and reset behavior before layout. The verified web data does not provide a complete pin-by-pin mapping, pricing, lead time, or all electrical timing values, so those fields are marked as unavailable rather than inferred.

Cotización Contacto

STM8S103F3M6

STM8S103F3M6 - 16MHz 8KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S103F3M6 is an 8-bit STM8S access-line microcontroller operating up to 16 MHz, with 8 KB of Flash program memory and a 20-pin SOIC package. The verified product information identifies a 2.95 V to 5.5 V supply range, 16 I/O ports, integrated true data EEPROM, and an 8 KB Flash organization of 8K × 8. Its lifecycle status is active. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one compact component. In the device hierarchy, the STM8S103F3 belongs to the STM8S 8-bit MCU family, a cost-conscious platform for embedded control. The STM8S103F3M6 is intended for products that need deterministic low-complexity control, local sensing, actuator output, and communication without adopting a higher-cost 32-bit MCU. The principal verified features include a 16 MHz clock, 8 KB Flash memory, true EEPROM, 16 I/O ports, and operation across a 2.95 V to 5.5 V supply range. The true data EEPROM is useful when persistent parameters must be retained outside the program Flash. Sixteen I/O ports give a compact design multiple digital connection points, while the 20-pin SOIC package supports conventional surface-mount assembly. The access-line positioning emphasizes general embedded utility rather than automotive qualification or extreme-performance processing. The STM8S architecture is suited to small control loops, keypad interfaces, indicator logic, sensor conditioning, and communication modules. Because only Flash memory and clock speed were explicitly quantified in the supplied verified results, detailed RAM, peripheral, timer, and electrical limits should be confirmed in the manufacturer documentation before design release. Firmware migration also requires reviewing the applicable STM8S103F3 device datasheet, reference manual, startup files, linker configuration, and toolchain settings. Typical applications include building controls, compact industrial interfaces, appliance controllers, instrumentation, and low-power sensor nodes. At 16 MHz, the MCU can service multiple time-sensitive I/O tasks while keeping the design centered on an economical 8-bit processor. Its 8 KB Flash capacity also makes it most appropriate for applications with modest code requirements and simple update behavior. Designers should confirm every peripheral assignment, alternate-function mapping, pin type, and electrical limit from the official STM8S103F3M6 documentation before PCB release. Decoupling, clock stability, programming access, and exposed-pin assignments must follow the manufacturer recommendations. This page combines verified distributor and manufacturer information with procurement context and engineering guidance rather than filling missing technical details with assumptions. The information below synthesizes official product positioning, distributor listings, verified pricing evidence, and application-specific design considerations. Missing RAM, timer, peripheral, and package details are intentionally marked for verification, preventing unsupported claims from entering a new design.

Cotización Contacto

STM8S103F3P6

STM8S103F3P6 - 8-bit 16MHz MCU, 8KB Flash, 20-TSSOP | STMicroelectronics

The STMicroelectronics STM8S103F3P6 is an access-line 8-bit microcontroller from the STM8S family, featuring a 16 MHz STM8 core, 8 KB of Flash program memory, and an integrated true data EEPROM, housed in a 20-pin TSSOP package. The device delivers 1 Kbyte of SRAM, a 10-bit ADC, three 16-bit timers, plus UART, SPI, and I²C communication interfaces, with 16 programmable I/O pins for general-purpose use. Operating from a 2.95 V to 5.5 V supply, the STM8S103F3P6 provides a balance of small footprint, low power, and rich peripherals for cost-sensitive embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripheral interfaces. The STM8 core uses an advanced Harvard architecture with a 16-bit instruction word and 32-bit program counter extension for efficient code density. The "Access line" designation indicates this part targets cost-optimized designs with sufficient peripherals for general control tasks. This positions the STM8S103F3P6 within the broader taxonomy: MCU -> 8-bit microcontroller -> STM8 family -> STM8S access line -> STMicroelectronics 8-bit portfolio. Key features include 8 KB Flash with in-application programming (I2AP) capability, 640-byte true data EEPROM rated for 300 k write/erase cycles, a 10-bit ADC with up to 5 channels, and a 4-channel 16-bit PWM/timer structure supporting capture, compare, and one-pulse modes. The integrated SWIM debug interface and on-chip watchdog with window option simplify development and field reliability. The 20-pin TSSOP package offers a compact 6.5 mm × 4.4 mm footprint suitable for space-constrained PCBs. Typical applications include low-cost consumer appliances, sensor interface nodes, LED lighting controllers, battery chargers, simple motor drivers, and replacement of legacy 8051 or PIC16 designs. The wide 2.95-5.5 V supply range also supports 3.3 V and 5 V industrial systems without level shifters. Designers should note that the STM8S103F3P6 (industrial grade, -40 °C to 85 °C) and the STM8S003F3P6 differ in feature set; the '103 part includes a beeper and AWU peripherals absent on the '003. For higher memory needs, the STM8S105 series provides 32 KB Flash in larger packages. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

Cotización Contacto

STM8S103K3U6

STM8S103K3U6 - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S103K3U6 is an access-line 8-bit STM8S microcontroller operating up to 16 MHz, with 8 KB of Flash program memory and 16 I/O ports, packaged in a 32-pin UFQFPN. It operates from 2.95 V to 5.5 V and integrates a 10-bit ADC, three timers, UART, SPI, and I²C. This combination makes it suitable for compact embedded control, sensor acquisition, communication, and low-cost automation systems where an 8-bit architecture, peripheral integration, and a small surface-mount footprint are useful. What is an 8-bit microcontroller? An 8-bit microcontroller is a compact embedded-processing device whose central processing unit, registers, data paths, and instruction handling are organized around eight-bit values. Within the broader semiconductor hierarchy, the STM8S103K3U6 is an MCU, then an embedded controller, then a general-purpose semiconductor used in control and communication products. The STM8S family combines program memory, RAM, data EEPROM, timers, serial interfaces, and analog conversion on one device. The part provides 8 Kbytes of Flash program memory, 1 Kbyte of RAM as identified in the retrieved comparison data, and 640 bytes of true data EEPROM with 300 kcycles endurance. Its 16 MHz clock supports responsive control loops, while the 10-bit ADC enables measurements from analog sensors. The integrated UART, SPI, and I²C interfaces support external transceivers, memory, sensors, displays, and other digital peripherals without requiring separate interface controllers. The STM8S103K3U6 is identified in the verified listing as a 32-pin UFQFPN device with an exposed pad and a 5 x 5 mm package description. The exposed pad and compact land pattern are important layout considerations because they influence thermal spreading, soldering, and assembly requirements. The device uses surface-mount construction, and the supplied search data identifies an operating supply range of 2.95 V to 5.5 V, allowing operation from either regulated 3.3 V or 5 V systems. Typical applications include low-cost sensor nodes, small motor or actuator controllers, communication modules, industrial control panels, instrument interfaces, and compact consumer products. The ADC and serial interfaces make it practical for designs that acquire analog values and transmit or store measurements. Firmware selection must match the STM8S device family, and board-level validation should include power sequencing, peripheral pin multiplexing, clock configuration, ADC calibration behavior, and exposed-pad thermal design. For a new design, choose the STM8S103K3U6 when 8 KB of Flash, 1 KB of RAM, a 16 MHz maximum clock, and integrated mixed-signal and serial peripherals are sufficient. It is not automatically interchangeable with a different STM8 device merely because the family name is similar; verify package pinout, memory size, voltage limits, peripheral assignments, and firmware support. This page combines verified distributor and manufacturer information with sourcing guidance, design cautions, and structured technical context.

Cotización Contacto

STM8S105C6T6

STM8S105C6T6 - 8-bit MCU, 16MHz, 32KB Flash | STMicroelectronics

The STM8S105C6T6 is an 8-bit microcontroller from STMicroelectronics' STM8S access line, featuring a 16 MHz advanced STM8 core with Harvard architecture and a 3-stage pipeline. It offers 32 KB of Flash program memory, 2 KB of RAM, and 1 KB of true data EEPROM, making it a cost-effective solution for a wide range of embedded control applications. The device is housed in a 48-pin LQFP package (7x7 mm) and operates over a supply voltage range of 2.95V to 5.5V, with an operating temperature range of -40°C to +85°C. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a processor core, memory, and programmable input/output peripherals. The STM8S105C6T6 belongs to the STM8S family, which is part of the broader STM8 microcontroller series, positioned below the 32-bit STM32 family in STMicroelectronics' product hierarchy. It is designed for applications requiring moderate processing power, low power consumption, and rich peripheral integration, such as industrial control, home appliances, and automotive body electronics. Key features include a 10-bit analog-to-digital converter (ADC) with up to 10 channels, multiple 16-bit timers, and a full set of communication interfaces: UART, SPI, and I2C. The device also integrates a true data EEPROM with up to 300,000 write/erase cycles, enabling data storage without external memory. The STM8 core operates at up to 16 MHz, delivering 16 MIPS throughput, and supports a wide range of clock sources including internal RC oscillators and external crystals. The STM8S105C6T6 is built on a high-density Flash technology, providing robust program memory endurance and fast programming. The architecture includes a nested interrupt controller with 28 interrupt vectors, enhancing real-time responsiveness. The device also features a low-power mode with typical current consumption of 5 µA in Halt mode, making it suitable for battery-powered applications. Typical applications include industrial automation, home appliances (e.g., washing machines, air conditioners), power tools, and automotive body control modules. The rich peripheral set and 5V-tolerant I/Os allow direct interfacing with sensors, relays, and displays without level shifting. The LQFP-48 package provides 38 I/O pins, offering ample connectivity for control and communication. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100 nF capacitors placed close to the device. The NRST pin should be connected to a 100 nF capacitor to ground for reliable reset. For applications requiring precise timing, use an external crystal oscillator with load capacitors as specified in the datasheet.

Cotización Contacto

STM8S105K4B6

STM8S105K4B6 8-Bit 16MHz MCU 16KB Flash | STMicroelectronics

The STMicroelectronics STM8S105K4B6 is an 8-bit STM8S series microcontroller operating at 16 MHz, with 16 KB of Flash program memory and 2 KB of RAM, housed in a 32-pin SDIP package. It belongs to the STM8S105x4/6 access-line family, which combines integrated data EEPROM, a 10-bit ADC, timers, UART, SPI, and I2C in an 8-bit embedded-control device. What is an 8-bit microcontroller? An 8-bit MCU is a compact embedded processor whose internal bus and arithmetic operations are organized around eight-bit data. STM8 devices sit within the broader semiconductor and microcontroller hierarchy and are commonly used for cost-sensitive control, sensing, communications, and actuator-control systems. The STM8S105K4B6 provides enough Flash and RAM for compact embedded applications without requiring a higher-complexity processor. Key features include an 8-bit architecture, 16 MHz maximum clocking, 16 KB Flash, 2 KB RAM, and 25 I/O according to the verified distributor specifications. The device also includes a 10-bit ADC, UART, SPI, I2C, timers, and integrated true data EEPROM. These peripherals enable local sensing, serial communication, and motor or relay control while keeping the design compact. The STM8S105K4B6 is identified as part of the STM8S105x4/6 access line, with the manufacturer describing the family as offering 16 to 32 KB Flash and integrated true data EEPROM. The verified product-page result specifically associates this MPN with a 32-SDIP package, 0.400 inch, 10.16 mm. Exact operating voltage, temperature limits, ADC accuracy details, timer ratings, and electrical timing values are not included in the supplied verified data and must be checked against the manufacturer datasheet. Typical applications include small industrial controllers, sensor nodes, serial-interface equipment, LED-control boards, compact instrumentation, and embedded systems using UART, SPI, or I2C. The 16 MHz clock speed supports responsive control-loop execution, while the 10-bit ADC is useful for analog monitoring. A designer should confirm memory-map compatibility, peripheral availability, startup behavior, and electrical limits before replacing another STM8 device in an existing design. For implementation, begin with the manufacturer datasheet and reference manual for exact pin assignments, register definitions, clock settings, and peripheral constraints. Use the official STMicroelectronics product page as the primary lifecycle and family reference. This page synthesizes verified distributor specifications, procurement information, application context, and replacement guidance without inventing unavailable electrical details.

Cotización Contacto

Subcategorías

Productos (32761)

STM8L151C6T6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics

STM8L151F3P3 - 16MHz 8KB Flash MCU | STMicroelectronics

STM8L151F3P6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

STM8L151G3U6 - 16MHz 8KB Ultra-Low-Power MCU | STMicroelectronics

STM8L151G4U6 - 16MHz 16KB Ultra-Low-Power MCU | ST

STM8L151G6U6 - 8-bit Ultra-Low-Power MCU, 32KB Flash | STMicroelectronics

STM8L151K6U3 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

STM8L152C6T6 - 8-bit Ultra-Low-Power MCU 32KB Flash | STMicroelectronics

STM8L152C6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

STM8L152R8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics

STM8L162M8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics

STM8S001J3M3 - 16MHz 8-bit MCU, 8KB Flash, SOIC-8 | STMicroelectronics

STM8S003F3P6 - 8-bit MCU 8KB Flash 16MHz TSSOP-20 | STMicroelectronics

STM8S003F3P6TR - 8-bit MCU, 8KB Flash, 16MHz | STMicroelectronics

STM8S003K3T6 - 8-bit 16MHz MCU, 8KB Flash | STMicroelectronics

STM8S005C6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics

STM8S007C8T6 - 8-Bit MCU, 64KB Flash, 24MHz | STMicroelectronics

STM8S103F2M6 - 8-Bit 16MHz 4KB MCU | STMicroelectronics

STM8S103F2P3 - 16MHz 8-Bit MCU, 4KB Flash | STMicroelectronics

STM8S103F3M6 - 16MHz 8KB 8-Bit MCU | STMicroelectronics

STM8S103F3P6 - 8-bit 16MHz MCU, 8KB Flash, 20-TSSOP | STMicroelectronics

STM8S103K3U6 - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics

STM8S105C6T6 - 8-bit MCU, 16MHz, 32KB Flash | STMicroelectronics

STM8S105K4B6 8-Bit 16MHz MCU 16KB Flash | STMicroelectronics